https://github.com/torvalds/linux
Tip revision: 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 authored by Linus Torvalds on 03 October 2021, 21:08:47 UTC
Linux 5.15-rc4
Linux 5.15-rc4
Tip revision: 9e1ff30
mach-smartq5.c
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2010 Maurus Cuelenaere
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include "gpio-cfg.h"
#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
{
.name = "smartq5:green",
.active_low = 1,
.gpio = S3C64XX_GPN(8),
},
{
.name = "smartq5:red",
.active_low = 1,
.gpio = S3C64XX_GPN(9),
},
};
static struct gpio_led_platform_data smartq5_led_data = {
.num_leds = ARRAY_SIZE(smartq5_leds),
.leds = smartq5_leds,
};
static struct platform_device smartq5_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &smartq5_led_data,
};
/* Labels according to the SmartQ manual */
static struct gpio_keys_button smartq5_buttons[] = {
{
.gpio = S3C64XX_GPL(14),
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(2),
.code = KEY_KPMINUS,
.desc = "Minus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(12),
.code = KEY_KPPLUS,
.desc = "Plus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(15),
.code = KEY_ENTER,
.desc = "Move",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data smartq5_buttons_data = {
.buttons = smartq5_buttons,
.nbuttons = ARRAY_SIZE(smartq5_buttons),
};
static struct platform_device smartq5_buttons_device = {
.name = "gpio-keys",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &smartq5_buttons_data,
}
};
static struct s3c_fb_pd_win smartq5_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode smartq5_lcd_timing = {
.left_margin = 216,
.right_margin = 40,
.upper_margin = 35,
.lower_margin = 10,
.hsync_len = 1,
.vsync_len = 1,
.xres = 800,
.yres = 480,
.refresh = 80,
};
static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &smartq5_lcd_timing,
.win[0] = &smartq5_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VDEN,
};
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
};
static void __init smartq5_machine_init(void)
{
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END