https://github.com/torvalds/linux
Tip revision: 741b2252a5e14d6c60a913c77a6099abe73a854a authored by Linus Torvalds on 28 October 2005, 00:02:08 UTC
Linux v2.6.14
Linux v2.6.14
Tip revision: 741b225
cerf.c
/*
* linux/arch/arm/mach-sa1100/cerf.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Apr-2003 : Removed some old PDA crud [FB]
* Oct-2003 : Added uart2 resource [FB]
* Jan-2004 : Removed io map for flash [FB]
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/cerf.h>
#include <asm/arch/mcp.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
[0] = {
.start = 0x80030000,
.end = 0x8003ffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device cerfuart2_device = {
.name = "sa11x0-uart",
.id = 2,
.num_resources = ARRAY_SIZE(cerfuart2_resources),
.resource = cerfuart2_resources,
};
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
# define CERF_FLASH_SIZE 0x02000000
#elif defined CONFIG_SA1100_CERF_FLASH_16MB
# define CERF_FLASH_SIZE 0x01000000
#elif defined CONFIG_SA1100_CERF_FLASH_8MB
# define CERF_FLASH_SIZE 0x00800000
#else
# error "Undefined flash size for CERF"
#endif
static struct mtd_partition cerf_partitions[] = {
{
.name = "Bootloader",
.size = 0x00020000,
.offset = 0x00000000,
}, {
.name = "Params",
.size = 0x00040000,
.offset = 0x00020000,
}, {
.name = "Kernel",
.size = 0x00100000,
.offset = 0x00060000,
}, {
.name = "Filesystem",
.size = CERF_FLASH_SIZE-0x00160000,
.offset = 0x00160000,
}
};
static struct flash_platform_data cerf_flash_data = {
.map_name = "cfi_probe",
.parts = cerf_partitions,
.nr_parts = ARRAY_SIZE(cerf_partitions),
};
static struct resource cerf_flash_resource = {
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static void __init cerf_init_irq(void)
{
sa1100_init_irq();
set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
}
static struct map_desc cerf_io_desc[] __initdata = {
/* virtual physical length type */
{ 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */
};
static void __init cerf_map_io(void)
{
sa1100_map_io();
iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc));
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
sa1100_register_uart(2, 1);
/* set some GPDR bits here while it's safe */
GPDR |= CERF_GPIO_CF_RESET;
}
static struct mcp_plat_data cerf_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init cerf_init(void)
{
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
sa11x0_set_mcp_data(&cerf_mcp_data);
}
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
/* Maintainer: support@intrinsyc.com */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
.map_io = cerf_map_io,
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
MACHINE_END