https://github.com/torvalds/linux
Tip revision: 93ee7a9340d64f20295aacc3fb6a22b759323280 authored by Linus Torvalds on 14 August 2011, 22:09:08 UTC
Linux 3.1-rc2
Linux 3.1-rc2
Tip revision: 93ee7a9
board-mop500-regulators.c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com>
* Bengt Jonsson <bengt.g.jonsson@stericsson.com>
*
* MOP500 board specific initialization for regulators
*/
#include <linux/kernel.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"
/*
* TPS61052 regulator
*/
static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
/*
* Boost converter supply to raise voltage on audio speaker, this
* is actually connected to three pins, VInVhfL (left amplifier)
* VInVhfR (right amplifier) and VIntDClassInt - all three must
* be connected to the same voltage.
*/
REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
};
struct regulator_init_data tps61052_regulator = {
.constraints = {
.name = "vaudio-hf",
.min_uV = 4500000,
.max_uV = 4500000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
.consumer_supplies = tps61052_vaudio_consumers,
};
static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
/* External displays, connector on board 2v5 power supply */
REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
/* SFH7741 proximity sensor */
REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
/* BH1780GLS ambient light sensor */
REGULATOR_SUPPLY("vcc", "2-0029"),
/* lsm303dlh accelerometer */
REGULATOR_SUPPLY("vdd", "3-0018"),
/* lsm303dlh magnetometer */
REGULATOR_SUPPLY("vdd", "3-001e"),
/* Rohm BU21013 Touchscreen devices */
REGULATOR_SUPPLY("avdd", "3-005c"),
REGULATOR_SUPPLY("avdd", "3-005d"),
/* Synaptics RMI4 Touchscreen device */
REGULATOR_SUPPLY("vdd", "3-004b"),
};
static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
/* On-board eMMC power */
REGULATOR_SUPPLY("vmmc", "sdi4"),
/* AB8500 audio codec */
REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
};
static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
/* External MMC slot power */
REGULATOR_SUPPLY("vmmc", "sdi0"),
};
static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
/* TV-out DENC supply */
REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
/* Internal general-purpose ADC */
REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
};
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
/* USB Transceiver */
REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
};
static struct regulator_consumer_supply ab8500_vana_consumers[] = {
/* External displays, connector on board, 1v8 power supply */
REGULATOR_SUPPLY("vsmps2", "mcde.0"),
};
/* ab8500 regulator register initialization */
struct ab8500_regulator_reg_init
ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
/*
* VanaRequestCtrl = HP/LP depending on VxRequest
* VextSupply1RequestCtrl = HP/LP depending on VxRequest
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
/*
* VextSupply2RequestCtrl = HP/LP depending on VxRequest
* VextSupply3RequestCtrl = HP/LP depending on VxRequest
* Vaux1RequestCtrl = HP/LP depending on VxRequest
* Vaux2RequestCtrl = HP/LP depending on VxRequest
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
/*
* Vaux3RequestCtrl = HP/LP depending on VxRequest
* SwHPReq = Control through SWValid disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
/*
* VanaSysClkReq1HPValid = disabled
* Vaux1SysClkReq1HPValid = disabled
* Vaux2SysClkReq1HPValid = disabled
* Vaux3SysClkReq1HPValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
/*
* VextSupply1SysClkReq1HPValid = disabled
* VextSupply2SysClkReq1HPValid = disabled
* VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
/*
* VanaHwHPReq1Valid = disabled
* Vaux1HwHPreq1Valid = disabled
* Vaux2HwHPReq1Valid = disabled
* Vaux3HwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
/*
* VextSupply1HwHPReq1Valid = disabled
* VextSupply2HwHPReq1Valid = disabled
* VextSupply3HwHPReq1Valid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
/*
* VanaHwHPReq2Valid = disabled
* Vaux1HwHPReq2Valid = disabled
* Vaux2HwHPReq2Valid = disabled
* Vaux3HwHPReq2Valid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
/*
* VextSupply1HwHPReq2Valid = disabled
* VextSupply2HwHPReq2Valid = disabled
* VextSupply3HwHPReq2Valid = HWReq2 controlled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
/*
* VanaSwHPReqValid = disabled
* Vaux1SwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
/*
* Vaux2SwHPReqValid = disabled
* Vaux3SwHPReqValid = disabled
* VextSupply1SwHPReqValid = disabled
* VextSupply2SwHPReqValid = disabled
* VextSupply3SwHPReqValid = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
/*
* SysClkReq2Valid1 = SysClkReq2 controlled
* SysClkReq3Valid1 = disabled
* SysClkReq4Valid1 = SysClkReq4 controlled
* SysClkReq5Valid1 = disabled
* SysClkReq6Valid1 = SysClkReq6 controlled
* SysClkReq7Valid1 = disabled
* SysClkReq8Valid1 = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
/*
* SysClkReq2Valid2 = disabled
* SysClkReq3Valid2 = disabled
* SysClkReq4Valid2 = disabled
* SysClkReq5Valid2 = disabled
* SysClkReq6Valid2 = SysClkReq6 controlled
* SysClkReq7Valid2 = disabled
* SysClkReq8Valid2 = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
/*
* VTVoutEna = disabled
* Vintcore12Ena = disabled
* Vintcore12Sel = 1.25 V
* Vintcore12LP = inactive (HP)
* VTVoutLP = inactive (HP)
*/
INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
/*
* VaudioEna = disabled
* VdmicEna = disabled
* Vamic1Ena = disabled
* Vamic2Ena = disabled
*/
INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
/*
* Vamic1_dzout = high-Z when Vamic1 is disabled
* Vamic2_dzout = high-Z when Vamic2 is disabled
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
/*
* VPll = Hw controlled
* VanaRegu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
/*
* VrefDDREna = disabled
* VrefDDRSleepMode = inactive (no pulldown)
*/
INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
/*
* VextSupply1Regu = HW control
* VextSupply2Regu = HW control
* VextSupply3Regu = HW control
* ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
* ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
*/
INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
/*
* Vaux1Regu = force HP
* Vaux2Regu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
/*
* Vaux3regu = force off
*/
INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
/*
* Vsmps1 = 1.15V
*/
INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
/*
* Vaux1Sel = 2.5 V
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
/*
* Vaux2Sel = 2.9 V
*/
INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
/*
* Vaux3Sel = 2.91 V
*/
INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
/*
* VextSupply12LP = disabled (no LP)
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
/*
* Vaux1Disch = short discharge time
* Vaux2Disch = short discharge time
* Vaux3Disch = short discharge time
* Vintcore12Disch = short discharge time
* VTVoutDisch = short discharge time
* VaudioDisch = short discharge time
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
/*
* VanaDisch = short discharge time
* VdmicPullDownEna = pulldown disabled when Vdmic is disabled
* VdmicDisch = short discharge time
*/
INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
};
/* AB8500 regulators */
struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
[AB8500_LDO_AUX1] = {
.constraints = {
.name = "V-DISPLAY",
.min_uV = 2500000,
.max_uV = 2900000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1, /* display is on at boot */
/*
* This voltage cannot be disabled right now because
* it is somehow affecting the external MMC
* functionality, though that typically will use
* AUX3.
*/
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
.consumer_supplies = ab8500_vaux1_consumers,
},
/* supplies to the on-board eMMC */
[AB8500_LDO_AUX2] = {
.constraints = {
.name = "V-eMMC1",
.min_uV = 1100000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
.consumer_supplies = ab8500_vaux2_consumers,
},
/* supply for VAUX3, supplies to SDcard slots */
[AB8500_LDO_AUX3] = {
.constraints = {
.name = "V-MMC-SD",
.min_uV = 1100000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
.consumer_supplies = ab8500_vaux3_consumers,
},
/* supply for tvout, gpadc, TVOUT LDO */
[AB8500_LDO_TVOUT] = {
.constraints = {
.name = "V-TVOUT",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
.consumer_supplies = ab8500_vtvout_consumers,
},
/* supply for ab8500-vaudio, VAUDIO LDO */
[AB8500_LDO_AUDIO] = {
.constraints = {
.name = "V-AUD",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
},
/* supply for v-anamic1 VAMic1-LDO */
[AB8500_LDO_ANAMIC1] = {
.constraints = {
.name = "V-AMIC1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
},
/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
[AB8500_LDO_ANAMIC2] = {
.constraints = {
.name = "V-AMIC2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
},
/* supply for v-dmic, VDMIC LDO */
[AB8500_LDO_DMIC] = {
.constraints = {
.name = "V-DMIC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
},
/* supply for v-intcore12, VINTCORE12 LDO */
[AB8500_LDO_INTCORE] = {
.constraints = {
.name = "V-INTCORE",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
.consumer_supplies = ab8500_vintcore_consumers,
},
/* supply for U8500 CSI/DSI, VANA LDO */
[AB8500_LDO_ANA] = {
.constraints = {
.name = "V-CSI/DSI",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
.consumer_supplies = ab8500_vana_consumers,
},
};