https://github.com/torvalds/linux
Tip revision: 2595646791c319cadfdbf271563aac97d0843dc7 authored by Linus Torvalds on 02 December 2018, 23:07:55 UTC
Linux 4.20-rc5
Linux 4.20-rc5
Tip revision: 2595646
versatile_dt.c
/*
* Versatile board support using the device tree
*
* Copyright (C) 2010 Secret Lab Technologies Ltd.
* Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com>
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
/*
* ------------------------------------------------------------------------
* Versatile Registers
* ------------------------------------------------------------------------
*/
#define VERSATILE_SYS_PCICTL_OFFSET 0x44
#define VERSATILE_SYS_MCI_OFFSET 0x48
#define VERSATILE_SYS_CLCD_OFFSET 0x50
/*
* VERSATILE peripheral addresses
*/
#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
/*
* System controller bit assignment
*/
#define VERSATILE_REFCLK 0
#define VERSATILE_TIMCLK 1
#define VERSATILE_TIMER1_EnSel 15
#define VERSATILE_TIMER2_EnSel 17
#define VERSATILE_TIMER3_EnSel 19
#define VERSATILE_TIMER4_EnSel 21
static void __iomem *versatile_sys_base;
static void __iomem *versatile_ib2_ctrl;
unsigned int mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
if (adev->res.start == VERSATILE_MMCI0_BASE)
mask = 1;
else
mask = 2;
return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask;
}
static struct mmci_platform_data mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
};
static struct mmci_platform_data mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
};
/*
* CLCD support.
*/
#define SYS_CLCD_MODE_MASK (3 << 0)
#define SYS_CLCD_MODE_888 (0 << 0)
#define SYS_CLCD_MODE_5551 (1 << 0)
#define SYS_CLCD_MODE_565_RLSB (2 << 0)
#define SYS_CLCD_MODE_565_BLSB (3 << 0)
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA (0x1f << 8)
static bool is_sanyo_2_5_lcd;
/*
* Disable all display connectors on the interface module.
*/
static void versatile_clcd_disable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
ctrl &= ~0x01;
writel(ctrl, versatile_ib2_ctrl);
}
}
/*
* Enable the relevant connector on the interface module.
*/
static void versatile_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_MODE_MASK;
switch (var->green.length) {
case 5:
val |= SYS_CLCD_MODE_5551;
break;
case 6:
if (var->red.offset == 0)
val |= SYS_CLCD_MODE_565_RLSB;
else
val |= SYS_CLCD_MODE_565_BLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
break;
}
/*
* Set the MUX
*/
writel(val, sys_clcd);
/*
* And now enable the PSUs
*/
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
ctrl |= 0x01;
writel(ctrl, versatile_ib2_ctrl);
}
}
/*
* Detect which LCD panel is connected, and return the appropriate
* clcd_panel structure. Note: we do not have any information on
* the required timings for the 8.4in panel, so we presently assume
* VGA timings.
*/
static int versatile_clcd_setup(struct clcd_fb *fb)
{
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
const char *panel_name;
u32 val;
is_sanyo_2_5_lcd = false;
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel_name = "Sanyo TM38QV67A02A";
else if (val == SYS_CLCD_ID_SANYO_2_5) {
panel_name = "Sanyo QVGA Portrait";
is_sanyo_2_5_lcd = true;
} else if (val == SYS_CLCD_ID_EPSON_2_2)
panel_name = "Epson L2F50113T00";
else if (val == SYS_CLCD_ID_VGA)
panel_name = "VGA";
else {
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
val);
panel_name = "VGA";
}
fb->panel = versatile_clcd_get_panel(panel_name);
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
{
clcdfb_decode(fb, regs);
/* Always clear BGR for RGB565: we do the routing externally */
if (fb->fb.var.green.length == 6)
regs->cntl &= ~CNTL_BGR;
}
static struct clcd_board clcd_plat_data = {
.name = "Versatile",
.caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = versatile_clcd_decode,
.disable = versatile_clcd_disable,
.enable = versatile_clcd_enable,
.setup = versatile_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
/*
* Lookup table for attaching a specific name and platform_data pointer to
* devices as they get created by of_platform_populate(). Ideally this table
* would not exist, but the current clock implementation depends on some devices
* having a specific name.
*/
struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
{}
};
static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
{
.virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
.pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
.length = SZ_4K * 9,
.type = MT_DEVICE
}
};
static void __init versatile_map_io(void)
{
debug_ll_io_init();
iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
}
static void __init versatile_init_early(void)
{
u32 val;
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
__io_address(VERSATILE_SCTL_BASE));
}
static void __init versatile_dt_pci_init(void)
{
u32 val;
struct device_node *np;
struct property *newprop;
np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci");
if (!np)
return;
/* Check if PCI backplane is detected */
val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
if (val & 1) {
/*
* Enable PCI accesses. Note that the documentaton is
* inconsistent whether or not this is needed, but the old
* driver had it so we will keep it.
*/
writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
return;
}
newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
if (!newprop)
return;
newprop->name = kstrdup("status", GFP_KERNEL);
newprop->value = kstrdup("disabled", GFP_KERNEL);
newprop->length = sizeof("disabled");
of_update_property(np, newprop);
pr_info("Not plugged into PCI backplane!\n");
}
static void __init versatile_dt_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile");
if (np)
versatile_sys_base = of_iomap(np, 0);
WARN_ON(!versatile_sys_base);
versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K);
versatile_dt_pci_init();
of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL);
}
static const char *const versatile_dt_match[] __initconst = {
"arm,versatile-ab",
"arm,versatile-pb",
NULL,
};
DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
MACHINE_END