https://github.com/torvalds/linux
Tip revision: 4a10c2ac2f368583138b774ca41fac4207911983 authored by Linus Torvalds on 23 September 2013, 22:41:09 UTC
Linux 3.12-rc2
Linux 3.12-rc2
Tip revision: 4a10c2a
tc2_pm.c
/*
* arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
*
* Created by: Nicolas Pitre, October 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
* Some portions of this file were originally written by Achin Gupta
* Copyright: (C) 2012 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/mcpm.h>
#include <asm/proc-fns.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <linux/arm-cci.h>
#include "spc.h"
/* SCC conf registers */
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
* is already live using the same logical CPU number which trips lockdep
* debugging.
*/
static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
#define TC2_CLUSTERS 2
#define TC2_MAX_CPUS_PER_CLUSTER 3
static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
/* Keep per-cpu usage count to cope with unordered up/down requests */
static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
#define tc2_cluster_unused(cluster) \
(!tc2_pm_use_count[0][cluster] && \
!tc2_pm_use_count[1][cluster] && \
!tc2_pm_use_count[2][cluster])
static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
{
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
return -EINVAL;
/*
* Since this is called with IRQs enabled, and no arch_spin_lock_irq
* variant exists, we need to disable IRQs manually here.
*/
local_irq_disable();
arch_spin_lock(&tc2_pm_lock);
if (tc2_cluster_unused(cluster))
ve_spc_powerdown(cluster, false);
tc2_pm_use_count[cpu][cluster]++;
if (tc2_pm_use_count[cpu][cluster] == 1) {
ve_spc_set_resume_addr(cluster, cpu,
virt_to_phys(mcpm_entry_point));
ve_spc_cpu_wakeup_irq(cluster, cpu, true);
} else if (tc2_pm_use_count[cpu][cluster] != 2) {
/*
* The only possible values are:
* 0 = CPU down
* 1 = CPU (still) up
* 2 = CPU requested to be up before it had a chance
* to actually make itself down.
* Any other value is a bug.
*/
BUG();
}
arch_spin_unlock(&tc2_pm_lock);
local_irq_enable();
return 0;
}
static void tc2_pm_down(u64 residency)
{
unsigned int mpidr, cpu, cluster;
bool last_man = false, skip_wfi = false;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
__mcpm_cpu_going_down(cpu, cluster);
arch_spin_lock(&tc2_pm_lock);
BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
tc2_pm_use_count[cpu][cluster]--;
if (tc2_pm_use_count[cpu][cluster] == 0) {
ve_spc_cpu_wakeup_irq(cluster, cpu, true);
if (tc2_cluster_unused(cluster)) {
ve_spc_powerdown(cluster, true);
ve_spc_global_wakeup_irq(true);
last_man = true;
}
} else if (tc2_pm_use_count[cpu][cluster] == 1) {
/*
* A power_up request went ahead of us.
* Even if we do not want to shut this CPU down,
* the caller expects a certain state as if the WFI
* was aborted. So let's continue with cache cleaning.
*/
skip_wfi = true;
} else
BUG();
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
arch_spin_unlock(&tc2_pm_lock);
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
/*
* On the Cortex-A15 we need to disable
* L2 prefetching before flushing the cache.
*/
asm volatile(
"mcr p15, 1, %0, c15, c0, 3 \n\t"
"isb \n\t"
"dsb "
: : "r" (0x400) );
}
/*
* We need to disable and flush the whole (L1 and L2) cache.
* Let's do it in the safest possible way i.e. with
* no memory access within the following sequence
* including the stack.
*
* Note: fp is preserved to the stack explicitly prior doing
* this since adding it to the clobber list is incompatible
* with having CONFIG_FRAME_POINTER=y.
*/
asm volatile(
"str fp, [sp, #-4]! \n\t"
"mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
"bic r0, r0, #"__stringify(CR_C)" \n\t"
"mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
"isb \n\t"
"bl v7_flush_dcache_all \n\t"
"clrex \n\t"
"mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
"bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
"mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
"isb \n\t"
"dsb \n\t"
"ldr fp, [sp], #4"
: : : "r0","r1","r2","r3","r4","r5","r6","r7",
"r9","r10","lr","memory");
cci_disable_port_by_cpu(mpidr);
__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
} else {
/*
* If last man then undo any setup done previously.
*/
if (last_man) {
ve_spc_powerdown(cluster, false);
ve_spc_global_wakeup_irq(false);
}
arch_spin_unlock(&tc2_pm_lock);
/*
* We need to disable and flush only the L1 cache.
* Let's do it in the safest possible way as above.
*/
asm volatile(
"str fp, [sp, #-4]! \n\t"
"mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t"
"bic r0, r0, #"__stringify(CR_C)" \n\t"
"mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t"
"isb \n\t"
"bl v7_flush_dcache_louis \n\t"
"clrex \n\t"
"mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t"
"bic r0, r0, #(1 << 6) @ disable local coherency \n\t"
"mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t"
"isb \n\t"
"dsb \n\t"
"ldr fp, [sp], #4"
: : : "r0","r1","r2","r3","r4","r5","r6","r7",
"r9","r10","lr","memory");
}
__mcpm_cpu_down(cpu, cluster);
/* Now we are prepared for power-down, do it: */
if (!skip_wfi)
wfi();
/* Not dead at this point? Let our caller cope. */
}
static void tc2_pm_power_down(void)
{
tc2_pm_down(0);
}
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
gic_cpu_if_down();
tc2_pm_down(residency);
}
static void tc2_pm_powered_up(void)
{
unsigned int mpidr, cpu, cluster;
unsigned long flags;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
local_irq_save(flags);
arch_spin_lock(&tc2_pm_lock);
if (tc2_cluster_unused(cluster)) {
ve_spc_powerdown(cluster, false);
ve_spc_global_wakeup_irq(false);
}
if (!tc2_pm_use_count[cpu][cluster])
tc2_pm_use_count[cpu][cluster] = 1;
ve_spc_cpu_wakeup_irq(cluster, cpu, false);
ve_spc_set_resume_addr(cluster, cpu, 0);
arch_spin_unlock(&tc2_pm_lock);
local_irq_restore(flags);
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
.power_up = tc2_pm_power_up,
.power_down = tc2_pm_power_down,
.suspend = tc2_pm_suspend,
.powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
{
unsigned int mpidr, cpu, cluster;
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
pr_err("%s: boot CPU is out of bound!\n", __func__);
return false;
}
tc2_pm_use_count[cpu][cluster] = 1;
return true;
}
/*
* Enable cluster-level coherency, in preparation for turning on the MMU.
*/
static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
{
asm volatile (" \n"
" cmp r0, #1 \n"
" bxne lr \n"
" b cci_enable_port_for_self ");
}
static int __init tc2_pm_init(void)
{
int ret;
void __iomem *scc;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
/*
* The power management-related features are hidden behind
* SCC registers. We need to extract runtime information like
* cluster ids and number of CPUs really available in clusters.
*/
np = of_find_compatible_node(NULL, NULL,
"arm,vexpress-scc,v2p-ca15_a7");
scc = of_iomap(np, 0);
if (!scc)
return -ENODEV;
a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
return -EINVAL;
sys_info = readl_relaxed(scc + SYS_INFO);
tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
/*
* A subset of the SCC registers is also used to communicate
* with the SPC (power controller). We need to be able to
* drive it very early in the boot process to power up
* processors, so we initialize the SPC driver here.
*/
ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
if (ret)
return ret;
if (!cci_probed())
return -ENODEV;
if (!tc2_pm_usage_count_init())
return -EINVAL;
ret = mcpm_platform_register(&tc2_pm_power_ops);
if (!ret) {
mcpm_sync_init(tc2_pm_power_up_setup);
pr_info("TC2 power management initialized\n");
}
return ret;
}
early_initcall(tc2_pm_init);