https://github.com/torvalds/linux
Tip revision: 1ffaddd029c867d134a1dde39f540dcc8c52e274 authored by Linus Torvalds on 05 August 2018, 19:37:41 UTC
Linux 4.18-rc8
Linux 4.18-rc8
Tip revision: 1ffaddd
proc-arm720.S
/*
* linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720
*
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
* Rob Scott (rscott@mtrob.fdns.net)
* Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
* hacked for non-paged-MM by Hyok S. Choi, 2004.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* These are the low level assembler for performing cache and TLB
* functions on the ARM720T. The ARM720T has a writethrough IDC
* cache, so we don't need to clean it.
*
* Changelog:
* 05-09-2000 SJH Created by moving 720 specific functions
* out of 'proc-arm6,7.S' per RMK discussion
* 07-25-2000 SJH Added idle function.
* 08-25-2000 DBS Updated for integration of ARM Ltd version.
* 04-20-2004 HSC modified for non-paged memory management mode.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
/*
* Function: arm720_proc_init (void)
* : arm720_proc_fin (void)
*
* Notes : This processor does not require these
*/
ENTRY(cpu_arm720_dcache_clean_area)
ENTRY(cpu_arm720_proc_init)
ret lr
ENTRY(cpu_arm720_proc_fin)
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
/*
* Function: arm720_proc_do_idle(void)
* Params : r0 = unused
* Purpose : put the processor in proper idle mode
*/
ENTRY(cpu_arm720_do_idle)
ret lr
/*
* Function: arm720_switch_mm(unsigned long pgd_phys)
* Params : pgd_phys Physical address of page table
* Purpose : Perform a task switch, saving the old process' state and restoring
* the new.
*/
ENTRY(cpu_arm720_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
#endif
ret lr
/*
* Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
ENTRY(cpu_arm720_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
#endif
ret lr
/*
* Function: arm720_reset
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
ENTRY(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
#endif
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
ENDPROC(cpu_arm720_reset)
.popsection
.type __arm710_setup, #function
__arm710_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
mrc p15, 0, r0, c1, c0 @ get control register
ldr r5, arm710_cr1_clear
bic r0, r0, r5
ldr r5, arm710_cr1_set
orr r0, r0, r5
ret lr @ __ret (head.S)
.size __arm710_setup, . - __arm710_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* .... 0001 ..11 1101
*
*/
.type arm710_cr1_clear, #object
.type arm710_cr1_set, #object
arm710_cr1_clear:
.word 0x0f3f
arm710_cr1_set:
.word 0x013d
.type __arm720_setup, #function
__arm720_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
adr r5, arm720_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, r5
orr r0, r0, r6
ret lr @ __ret (head.S)
.size __arm720_setup, . - __arm720_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* ..1. 1001 ..11 1101
*
*/
.type arm720_crval, #object
arm720_crval:
crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort
.section ".rodata"
string cpu_arch_name, "armv4t"
string cpu_elf_name, "v4"
string cpu_arm710_name, "ARM710T"
string cpu_arm720_name, "ARM720T"
.align
/*
* See <asm/procinfo.h> for a definition of this structure.
*/
.section ".proc.info.init", #alloc
.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
.type __\name\()_proc_info,#object
__\name\()_proc_info:
.long \cpu_val
.long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn \cpu_flush, __\name\()_proc_info @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
.long \cpu_name
.long arm720_processor_functions
.long v4_tlb_fns
.long v4wt_user_fns
.long v4_cache_fns
.size __\name\()_proc_info, . - __\name\()_proc_info
.endm
arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup