https://github.com/torvalds/linux
Tip revision: 6a13feb9c82803e2b815eca72fa7a9f5561d7861 authored by Linus Torvalds on 02 November 2015, 00:05:25 UTC
Linux 4.3
Linux 4.3
Tip revision: 6a13feb
m527x.c
/***************************************************************************/
/*
* m527x.c -- platform support for ColdFire 527x based boards
*
* Sub-architcture dependent initialization code for the Freescale
* 5270/5271 and 5274/5275 CPUs.
*
* Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
&clk_sys,
&clk_mcfpit0,
&clk_mcfpit1,
&clk_mcfpit2,
&clk_mcfpit3,
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfuart2,
&clk_mcfqspi0,
&clk_fec0,
&clk_fec1,
NULL
};
/***************************************************************************/
static void __init m527x_qspi_init(void)
{
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
#if defined(CONFIG_M5271)
u16 par;
/* setup QSPS pins for QSPI with gpio CS control */
writeb(0x1f, MCFGPIO_PAR_QSPI);
/* and CS2 & CS3 as gpio */
par = readw(MCFGPIO_PAR_TIMER);
par &= 0x3f3f;
writew(par, MCFGPIO_PAR_TIMER);
#elif defined(CONFIG_M5275)
/* setup QSPS pins for QSPI with gpio CS control */
writew(0x003e, MCFGPIO_PAR_QSPI);
#endif
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
}
/***************************************************************************/
static void __init m527x_uarts_init(void)
{
u16 sepmask;
/*
* External Pin Mask Setting & Enable External Pin for Interface
*/
sepmask = readw(MCFGPIO_PAR_UART);
sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
writew(sepmask, MCFGPIO_PAR_UART);
}
/***************************************************************************/
static void __init m527x_fec_init(void)
{
u8 v;
/* Set multi-function pins to ethernet mode for fec0 */
#if defined(CONFIG_M5271)
v = readb(MCFGPIO_PAR_FECI2C);
writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
#else
u16 par;
par = readw(MCFGPIO_PAR_FECI2C);
writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
v = readb(MCFGPIO_PAR_FEC0HL);
writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
/* Set multi-function pins to ethernet mode for fec1 */
par = readw(MCFGPIO_PAR_FECI2C);
writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
v = readb(MCFGPIO_PAR_FEC1HL);
writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
#endif
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
m527x_uarts_init();
m527x_fec_init();
m527x_qspi_init();
}
/***************************************************************************/