https://github.com/torvalds/linux
Tip revision: dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50 authored by Linus Torvalds on 09 December 2011, 23:09:32 UTC
Linux 3.2-rc5
Linux 3.2-rc5
Tip revision: dc47ce9
ptrace.c
/*
* Kernel support for the ptrace() and syscall tracing interfaces.
*
* Copyright (C) 2000 Hewlett-Packard Co, Linuxcare Inc.
* Copyright (C) 2000 Matthew Wilcox <matthew@wil.cx>
* Copyright (C) 2000 David Huggins-Daines <dhd@debian.org>
* Copyright (C) 2008 Helge Deller <deller@gmx.de>
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <linux/user.h>
#include <linux/personality.h>
#include <linux/security.h>
#include <linux/compat.h>
#include <linux/signal.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/asm-offsets.h>
/* PSW bits we allow the debugger to modify */
#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB)
/*
* Called by kernel/ptrace.c when detaching..
*
* Make sure single step bits etc are not set.
*/
void ptrace_disable(struct task_struct *task)
{
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* make sure the trap bits are not set */
pa_psw(task)->r = 0;
pa_psw(task)->t = 0;
pa_psw(task)->h = 0;
pa_psw(task)->l = 0;
}
/*
* The following functions are called by ptrace_resume() when
* enabling or disabling single/block tracing.
*/
void user_disable_single_step(struct task_struct *task)
{
ptrace_disable(task);
}
void user_enable_single_step(struct task_struct *task)
{
clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
set_tsk_thread_flag(task, TIF_SINGLESTEP);
if (pa_psw(task)->n) {
struct siginfo si;
/* Nullified, just crank over the queue. */
task_regs(task)->iaoq[0] = task_regs(task)->iaoq[1];
task_regs(task)->iasq[0] = task_regs(task)->iasq[1];
task_regs(task)->iaoq[1] = task_regs(task)->iaoq[0] + 4;
pa_psw(task)->n = 0;
pa_psw(task)->x = 0;
pa_psw(task)->y = 0;
pa_psw(task)->z = 0;
pa_psw(task)->b = 0;
ptrace_disable(task);
/* Don't wake up the task, but let the
parent know something happened. */
si.si_code = TRAP_TRACE;
si.si_addr = (void __user *) (task_regs(task)->iaoq[0] & ~3);
si.si_signo = SIGTRAP;
si.si_errno = 0;
force_sig_info(SIGTRAP, &si, task);
/* notify_parent(task, SIGCHLD); */
return;
}
/* Enable recovery counter traps. The recovery counter
* itself will be set to zero on a task switch. If the
* task is suspended on a syscall then the syscall return
* path will overwrite the recovery counter with a suitable
* value such that it traps once back in user space. We
* disable interrupts in the tasks PSW here also, to avoid
* interrupts while the recovery counter is decrementing.
*/
pa_psw(task)->r = 1;
pa_psw(task)->t = 0;
pa_psw(task)->h = 0;
pa_psw(task)->l = 0;
}
void user_enable_block_step(struct task_struct *task)
{
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
set_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* Enable taken branch trap. */
pa_psw(task)->r = 0;
pa_psw(task)->t = 1;
pa_psw(task)->h = 0;
pa_psw(task)->l = 0;
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
long ret = -EIO;
switch (request) {
/* Read the word at location addr in the USER area. For ptraced
processes, the kernel saves all regs on a syscall. */
case PTRACE_PEEKUSR:
if ((addr & (sizeof(unsigned long)-1)) ||
addr >= sizeof(struct pt_regs))
break;
tmp = *(unsigned long *) ((char *) task_regs(child) + addr);
ret = put_user(tmp, (unsigned long __user *) data);
break;
/* Write the word at location addr in the USER area. This will need
to change when the kernel no longer saves all regs on a syscall.
FIXME. There is a problem at the moment in that r3-r18 are only
saved if the process is ptraced on syscall entry, and even then
those values are overwritten by actual register values on syscall
exit. */
case PTRACE_POKEUSR:
/* Some register values written here may be ignored in
* entry.S:syscall_restore_rfi; e.g. iaoq is written with
* r31/r31+4, and not with the values in pt_regs.
*/
if (addr == PT_PSW) {
/* Allow writing to Nullify, Divide-step-correction,
* and carry/borrow bits.
* BEWARE, if you set N, and then single step, it won't
* stop on the nullified instruction.
*/
data &= USER_PSW_BITS;
task_regs(child)->gr[0] &= ~USER_PSW_BITS;
task_regs(child)->gr[0] |= data;
ret = 0;
break;
}
if ((addr & (sizeof(unsigned long)-1)) ||
addr >= sizeof(struct pt_regs))
break;
if ((addr >= PT_GR1 && addr <= PT_GR31) ||
addr == PT_IAOQ0 || addr == PT_IAOQ1 ||
(addr >= PT_FR0 && addr <= PT_FR31 + 4) ||
addr == PT_SAR) {
*(unsigned long *) ((char *) task_regs(child) + addr) = data;
ret = 0;
}
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
}
#ifdef CONFIG_COMPAT
/* This function is needed to translate 32 bit pt_regs offsets in to
* 64 bit pt_regs offsets. For example, a 32 bit gdb under a 64 bit kernel
* will request offset 12 if it wants gr3, but the lower 32 bits of
* the 64 bit kernels view of gr3 will be at offset 28 (3*8 + 4).
* This code relies on a 32 bit pt_regs being comprised of 32 bit values
* except for the fp registers which (a) are 64 bits, and (b) follow
* the gr registers at the start of pt_regs. The 32 bit pt_regs should
* be half the size of the 64 bit pt_regs, plus 32*4 to allow for fr[]
* being 64 bit in both cases.
*/
static compat_ulong_t translate_usr_offset(compat_ulong_t offset)
{
if (offset < 0)
return sizeof(struct pt_regs);
else if (offset <= 32*4) /* gr[0..31] */
return offset * 2 + 4;
else if (offset <= 32*4+32*8) /* gr[0..31] + fr[0..31] */
return offset + 32*4;
else if (offset < sizeof(struct pt_regs)/2 + 32*4)
return offset * 2 + 4 - 32*8;
else
return sizeof(struct pt_regs);
}
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data)
{
compat_uint_t tmp;
long ret = -EIO;
switch (request) {
case PTRACE_PEEKUSR:
if (addr & (sizeof(compat_uint_t)-1))
break;
addr = translate_usr_offset(addr);
if (addr >= sizeof(struct pt_regs))
break;
tmp = *(compat_uint_t *) ((char *) task_regs(child) + addr);
ret = put_user(tmp, (compat_uint_t *) (unsigned long) data);
break;
/* Write the word at location addr in the USER area. This will need
to change when the kernel no longer saves all regs on a syscall.
FIXME. There is a problem at the moment in that r3-r18 are only
saved if the process is ptraced on syscall entry, and even then
those values are overwritten by actual register values on syscall
exit. */
case PTRACE_POKEUSR:
/* Some register values written here may be ignored in
* entry.S:syscall_restore_rfi; e.g. iaoq is written with
* r31/r31+4, and not with the values in pt_regs.
*/
if (addr == PT_PSW) {
/* Since PT_PSW==0, it is valid for 32 bit processes
* under 64 bit kernels as well.
*/
ret = arch_ptrace(child, request, addr, data);
} else {
if (addr & (sizeof(compat_uint_t)-1))
break;
addr = translate_usr_offset(addr);
if (addr >= sizeof(struct pt_regs))
break;
if (addr >= PT_FR0 && addr <= PT_FR31 + 4) {
/* Special case, fp regs are 64 bits anyway */
*(__u64 *) ((char *) task_regs(child) + addr) = data;
ret = 0;
}
else if ((addr >= PT_GR1+4 && addr <= PT_GR31+4) ||
addr == PT_IAOQ0+4 || addr == PT_IAOQ1+4 ||
addr == PT_SAR+4) {
/* Zero the top 32 bits */
*(__u32 *) ((char *) task_regs(child) + addr - 4) = 0;
*(__u32 *) ((char *) task_regs(child) + addr) = data;
ret = 0;
}
}
break;
default:
ret = compat_ptrace_request(child, request, addr, data);
break;
}
return ret;
}
#endif
long do_syscall_trace_enter(struct pt_regs *regs)
{
if (test_thread_flag(TIF_SYSCALL_TRACE) &&
tracehook_report_syscall_entry(regs))
return -1L;
return regs->gr[20];
}
void do_syscall_trace_exit(struct pt_regs *regs)
{
int stepping = test_thread_flag(TIF_SINGLESTEP) ||
test_thread_flag(TIF_BLOCKSTEP);
if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(regs, stepping);
}