https://github.com/torvalds/linux
Tip revision: 98b1cc82c4affc16f5598d4fa14b1858671b2263 authored by Linus Torvalds on 19 November 2023, 23:02:14 UTC
Linux 6.7-rc2
Linux 6.7-rc2
Tip revision: 98b1cc8
mpc832x_rdb.dts
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MPC832x RDB Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*/
/dts-v1/;
/ {
model = "MPC8323ERDB";
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet1;
ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8323@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <0x20>; // 32 bytes
i-cache-line-size = <0x20>; // 32 bytes
d-cache-size = <16384>; // L1, 16K
i-cache-size = <16384>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x04000000>;
};
soc8323@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
pmc: power@b00 {
compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
crypto@30000 {
compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
fsl,num-channels = <1>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
sleep = <&pmc 0x03000000>;
};
ipic:pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
par_io@1400 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1400 0x100>;
ranges = <3 0x1448 0x18>;
compatible = "fsl,mpc8323-qe-pario";
device_type = "par_io";
num-ports = <7>;
qe_pio_d: gpio-controller@1448 {
#gpio-cells = <2>;
compatible = "fsl,mpc8323-qe-pario-bank";
reg = <3 0x18>;
gpio-controller;
};
ucc2pio:ucc_pin@2 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
3 5 1 0 2 0 /* MDC */
3 21 2 0 1 0 /* RX_CLK (CLK16) */
3 23 2 0 1 0 /* TX_CLK (CLK3) */
0 18 1 0 1 0 /* TxD0 */
0 19 1 0 1 0 /* TxD1 */
0 20 1 0 1 0 /* TxD2 */
0 21 1 0 1 0 /* TxD3 */
0 22 2 0 1 0 /* RxD0 */
0 23 2 0 1 0 /* RxD1 */
0 24 2 0 1 0 /* RxD2 */
0 25 2 0 1 0 /* RxD3 */
0 26 2 0 1 0 /* RX_ER */
0 27 1 0 1 0 /* TX_ER */
0 28 2 0 1 0 /* RX_DV */
0 29 2 0 1 0 /* COL */
0 30 1 0 1 0 /* TX_EN */
0 31 2 0 1 0>; /* CRS */
};
ucc3pio:ucc_pin@3 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 13 2 0 1 0 /* RX_CLK (CLK9) */
3 24 2 0 1 0 /* TX_CLK (CLK10) */
1 0 1 0 1 0 /* TxD0 */
1 1 1 0 1 0 /* TxD1 */
1 2 1 0 1 0 /* TxD2 */
1 3 1 0 1 0 /* TxD3 */
1 4 2 0 1 0 /* RxD0 */
1 5 2 0 1 0 /* RxD1 */
1 6 2 0 1 0 /* RxD2 */
1 7 2 0 1 0 /* RxD3 */
1 8 2 0 1 0 /* RX_ER */
1 9 1 0 1 0 /* TX_ER */
1 10 2 0 1 0 /* RX_DV */
1 11 2 0 1 0 /* COL */
1 12 1 0 1 0 /* TX_EN */
1 13 2 0 1 0>; /* CRS */
};
};
};
qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0100000 0x00100000>;
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <198000000>;
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x4000>;
};
};
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
cs-gpios = <&qe_pio_d 13 0>;
mode = "cpu-qe";
mmc-slot@0 {
compatible = "fsl,mpc8323rdb-mmc-slot",
"mmc-spi-slot";
reg = <0>;
gpios = <&qe_pio_d 14 1
&qe_pio_d 15 0>;
voltage-ranges = <3300 3300>;
spi-max-frequency = <50000000>;
};
};
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
enet0: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk16";
tx-clock-name = "clk3";
phy-handle = <&phy00>;
pio-handle = <&ucc2pio>;
};
enet1: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk9";
tx-clock-name = "clk10";
phy-handle = <&phy04>;
pio-handle = <&ucc3pio>;
};
mdio@3120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3120 0x18>;
compatible = "fsl,ucc-mdio";
phy00:ethernet-phy@0 {
reg = <0x0>;
};
phy04:ethernet-phy@4 {
reg = <0x4>;
};
};
qeic:interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <32 0x8 33 0x8>; //high:32 low:33
interrupt-parent = <&ipic>;
};
};
pci0: pci@e0008500 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
0x8000 0x0 0x0 0x1 &ipic 17 0x8
/* IDSEL 0x11 AD17 (Mini1)*/
0x8800 0x0 0x0 0x1 &ipic 18 0x8
0x8800 0x0 0x0 0x2 &ipic 19 0x8
0x8800 0x0 0x0 0x3 &ipic 20 0x8
0x8800 0x0 0x0 0x4 &ipic 48 0x8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
0x9000 0x0 0x0 0x1 &ipic 19 0x8
0x9000 0x0 0x0 0x2 &ipic 20 0x8
0x9000 0x0 0x0 0x3 &ipic 48 0x8
0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0x0 0x0>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100 /* internal registers */
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
sleep = <&pmc 0x00010000>;
};
};