https://github.com/torvalds/linux
Tip revision: 8124c8a6b35386f73523d27eacb71b5364a68c4c authored by Linus Torvalds on 30 May 2021, 21:58:25 UTC
Linux 5.13-rc4
Linux 5.13-rc4
Tip revision: 8124c8a
mpc836x_rdk.dts
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MPC8360E RDK Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
* Copyright 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*/
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360rdk";
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8360@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
/* filled by u-boot */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
/* filled by u-boot */
reg = <0 0>;
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
"simple-bus";
ranges = <0 0xe0000000 0x200000>;
reg = <0xe0000000 0x200>;
/* filled by u-boot */
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
pmc: power@b00 {
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 8>;
interrupt-parent = <&ipic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <16 8>;
interrupt-parent = <&ipic>;
dfsrr;
};
serial0: serial@4500 {
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
interrupts = <9 8>;
interrupt-parent = <&ipic>;
/* filled by u-boot */
clock-frequency = <0>;
};
serial1: serial@4600 {
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
interrupts = <10 8>;
interrupt-parent = <&ipic>;
/* filled by u-boot */
clock-frequency = <0>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
crypto@30000 {
compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
sleep = <&pmc 0x03000000>;
};
ipic: interrupt-controller@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
};
qe_pio_b: gpio-controller@1418 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x1418 0x18>;
gpio-controller;
};
qe_pio_e: gpio-controller@1460 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x1460 0x18>;
gpio-controller;
};
qe@100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe", "simple-bus";
ranges = <0 0x100000 0x100000>;
reg = <0x100000 0x480>;
/* filled by u-boot */
clock-frequency = <0>;
bus-frequency = <0>;
brg-frequency = <0>;
fsl,qe-num-riscs = <2>;
fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 0x10000 0xc000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 0xc000>;
};
};
timer@440 {
compatible = "fsl,mpc8360-qe-gtm",
"fsl,qe-gtm", "fsl,gtm";
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
clock-frequency = <166666666>;
};
usb@6c0 {
compatible = "fsl,mpc8360-qe-usb",
"fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk21";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&qe_pio_e 20 0 /* SPEED */
&qe_pio_e 21 1 /* POWER */>;
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu-qe";
};
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu-qe";
};
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
rx-clock-name = "none";
tx-clock-name = "clk9";
phy-handle = <&phy2>;
phy-connection-type = "rgmii-rxid";
/* filled by u-boot */
local-mac-address = [ 00 00 00 00 00 00 ];
};
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
rx-clock-name = "none";
tx-clock-name = "clk4";
phy-handle = <&phy4>;
phy-connection-type = "rgmii-rxid";
/* filled by u-boot */
local-mac-address = [ 00 00 00 00 00 00 ];
};
enet2: ucc@2600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
rx-clock-name = "clk20";
tx-clock-name = "clk19";
phy-handle = <&phy1>;
phy-connection-type = "mii";
/* filled by u-boot */
local-mac-address = [ 00 00 00 00 00 00 ];
};
enet3: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
rx-clock-name = "clk8";
tx-clock-name = "clk7";
phy-handle = <&phy3>;
phy-connection-type = "mii";
/* filled by u-boot */
local-mac-address = [ 00 00 00 00 00 00 ];
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,ucc-mdio";
reg = <0x2120 0x18>;
phy1: ethernet-phy@1 {
compatible = "national,DP83848VV";
reg = <1>;
};
phy2: ethernet-phy@2 {
compatible = "broadcom,BCM5481UA2KMLG";
reg = <2>;
};
phy3: ethernet-phy@3 {
compatible = "national,DP83848VV";
reg = <3>;
};
phy4: ethernet-phy@4 {
compatible = "broadcom,BCM5481UA2KMLG";
reg = <4>;
};
};
serial2: ucc@2400 {
device_type = "serial";
compatible = "ucc_uart";
reg = <0x2400 0x200>;
cell-index = <5>;
port-number = <0>;
rx-clock-name = "brg7";
tx-clock-name = "brg8";
interrupts = <40>;
interrupt-parent = <&qeic>;
soft-uart;
};
serial3: ucc@3400 {
device_type = "serial";
compatible = "ucc_uart";
reg = <0x3400 0x200>;
cell-index = <6>;
port-number = <1>;
rx-clock-name = "brg13";
tx-clock-name = "brg14";
interrupts = <41>;
interrupt-parent = <&qeic>;
soft-uart;
};
qeic: interrupt-controller@80 {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "fsl,qe-ic";
interrupt-controller;
reg = <0x80 0x80>;
big-endian;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xff800000 0x0800000
1 0 0x60000000 0x0001000
2 0 0x70000000 0x4000000>;
flash@0,0 {
compatible = "intel,PC28F640P30T85", "cfi-flash";
reg = <0 0 0x800000>;
bank-width = <2>;
device-width = <1>;
};
upm@1,0 {
compatible = "fsl,upm-nand";
reg = <1 0 1>;
fsl,upm-addr-offset = <16>;
fsl,upm-cmd-offset = <8>;
gpios = <&qe_pio_e 18 0>;
flash {
compatible = "st,nand512-a";
};
};
display@2,0 {
device_type = "display";
compatible = "fujitsu,MB86277", "fujitsu,mint";
reg = <2 0 0x4000000>;
fujitsu,sh3;
little-endian;
/* filled by u-boot */
address = <0>;
depth = <0>;
width = <0>;
height = <0>;
linebytes = <0>;
/* linux,opened; - added by uboot */
};
};
pci0: pci@e0008500 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
reg = <0xe0008500 0x100 /* internal registers */
0xe0008300 0x8>; /* config space access registers */
ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
interrupts = <66 8>;
interrupt-parent = <&ipic>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
0xa000 0 0 1 &ipic 18 8
0xa000 0 0 2 &ipic 19 8
/* PCI1 IDSEL 0x15 AD21 */
0xa800 0 0 1 &ipic 19 8
0xa800 0 0 2 &ipic 20 8
0xa800 0 0 3 &ipic 21 8
0xa800 0 0 4 &ipic 18 8>;
sleep = <&pmc 0x00010000>;
/* filled by u-boot */
bus-range = <0 0>;
clock-frequency = <0>;
};
};