https://github.com/torvalds/linux
Tip revision: 67a3e12b05e055c0415c556a315a3d3eb637e29e authored by Linus Torvalds on 30 May 2010, 20:21:02 UTC
Linux 2.6.35-rc1
Linux 2.6.35-rc1
Tip revision: 67a3e12
mpc8568mds.dts
/*
* MPC8568E MDS Device Tree Source
*
* Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
rapidio0 = &rio0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8568@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
sleep = <&pmc 0x00008000 // core
&pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x10000000>;
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
"simple-bus";
reg = <0xe0005000 0x1000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
0x2 0x0 0xf0000000 0x04000000
0x4 0x0 0xf8008000 0x00008000
0x5 0x0 0xf8010000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
bank-width = <2>;
device-width = <2>;
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr5: gpio-controller@11 {
#gpio-cells = <2>;
compatible = "fsl,mpc8568mds-bcsr-gpio";
reg = <0x5 0x1>;
gpio-controller;
};
};
pib@4,0 {
compatible = "fsl,mpc8568mds-pib";
reg = <4 0 0x8000>;
};
pib@5,0 {
compatible = "fsl,mpc8568mds-pib";
reg = <5 0 0x8000>;
};
};
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
bus-frequency = <0>;
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8568-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000004>;
ranges;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <3 1>;
interrupt-parent = <&mpic>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
sleep = <&pmc 0x00000400>;
dma-channel@0 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
sleep = <&pmc 0x00000080>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
sleep = <&pmc 0x00000040>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
duart-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000002>;
ranges;
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
};
global-utilities@e0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
pmc: power@70 {
compatible = "fsl,mpc8568-pmc",
"fsl,mpc8548-pmc";
reg = <0x70 0x20>;
};
};
crypto@30000 {
compatible = "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
par_io@e0100 {
reg = <0xe0100 0x100>;
device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
};
};
};
qe@e0080000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x10000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x10000>;
};
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
pio-handle = <&pio1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
pio-handle = <&pio2>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
/* These are the same PHYs as on
* gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <46 2 46 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
};
pci0: pci@e0008000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 AD19 */
0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
sleep = <&pmc 0x80000000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
/* PCI Express */
pci1: pcie@e000a000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
00000 0x0 0x0 0x1 &mpic 0x0 0x1
00000 0x0 0x0 0x2 &mpic 0x1 0x1
00000 0x0 0x0 0x3 &mpic 0x2 0x1
00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x800000>;
};
};
rio0: rapidio@e00c00000 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
reg = <0xe00c0000 0x20000>;
ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
interrupts = <48 2 /* error */
49 2 /* bell_outb */
50 2 /* bell_inb */
53 2 /* msg1_tx */
54 2 /* msg1_rx */
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
sleep = <&pmc 0x00080000 /* controller */
&pmc 0x00040000>; /* message unit */
};
leds {
compatible = "gpio-leds";
green {
gpios = <&bcsr5 1 0>;
};
amber {
gpios = <&bcsr5 2 0>;
};
red {
gpios = <&bcsr5 3 0>;
};
};
};
