https://github.com/torvalds/linux
Tip revision: f6f94e2ab1b33f0082ac22d71f66385a60d8157f authored by Linus Torvalds on 20 October 2010, 20:30:22 UTC
Linux 2.6.36
Linux 2.6.36
Tip revision: f6f94e2
book3s_interrupts.S
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright SUSE Linux Products GmbH 2009
*
* Authors: Alexander Graf <agraf@suse.de>
*/
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
#if defined(CONFIG_PPC_BOOK3S_64)
#define ULONG_SIZE 8
#define FUNC(name) GLUE(.,name)
#define GET_SHADOW_VCPU(reg) \
addi reg, r13, PACA_KVM_SVCPU
#define DISABLE_INTERRUPTS \
mfmsr r0; \
rldicl r0,r0,48,1; \
rotldi r0,r0,16; \
mtmsrd r0,1; \
#elif defined(CONFIG_PPC_BOOK3S_32)
#define ULONG_SIZE 4
#define FUNC(name) name
#define GET_SHADOW_VCPU(reg) \
lwz reg, (THREAD + THREAD_KVM_SVCPU)(r2)
#define DISABLE_INTERRUPTS \
mfmsr r0; \
rlwinm r0,r0,0,17,15; \
mtmsr r0; \
#endif /* CONFIG_PPC_BOOK3S_XX */
#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
#define VCPU_LOAD_NVGPRS(vcpu) \
PPC_LL r14, VCPU_GPR(r14)(vcpu); \
PPC_LL r15, VCPU_GPR(r15)(vcpu); \
PPC_LL r16, VCPU_GPR(r16)(vcpu); \
PPC_LL r17, VCPU_GPR(r17)(vcpu); \
PPC_LL r18, VCPU_GPR(r18)(vcpu); \
PPC_LL r19, VCPU_GPR(r19)(vcpu); \
PPC_LL r20, VCPU_GPR(r20)(vcpu); \
PPC_LL r21, VCPU_GPR(r21)(vcpu); \
PPC_LL r22, VCPU_GPR(r22)(vcpu); \
PPC_LL r23, VCPU_GPR(r23)(vcpu); \
PPC_LL r24, VCPU_GPR(r24)(vcpu); \
PPC_LL r25, VCPU_GPR(r25)(vcpu); \
PPC_LL r26, VCPU_GPR(r26)(vcpu); \
PPC_LL r27, VCPU_GPR(r27)(vcpu); \
PPC_LL r28, VCPU_GPR(r28)(vcpu); \
PPC_LL r29, VCPU_GPR(r29)(vcpu); \
PPC_LL r30, VCPU_GPR(r30)(vcpu); \
PPC_LL r31, VCPU_GPR(r31)(vcpu); \
/*****************************************************************************
* *
* Guest entry / exit code that is in kernel module memory (highmem) *
* *
****************************************************************************/
/* Registers:
* r3: kvm_run pointer
* r4: vcpu pointer
*/
_GLOBAL(__kvmppc_vcpu_entry)
kvm_start_entry:
/* Write correct stack frame */
mflr r0
PPC_STL r0,PPC_LR_STKOFF(r1)
/* Save host state to the stack */
PPC_STLU r1, -SWITCH_FRAME_SIZE(r1)
/* Save r3 (kvm_run) and r4 (vcpu) */
SAVE_2GPRS(3, r1)
/* Save non-volatile registers (r14 - r31) */
SAVE_NVGPRS(r1)
/* Save LR */
PPC_STL r0, _LINK(r1)
/* Load non-volatile guest state from the vcpu */
VCPU_LOAD_NVGPRS(r4)
GET_SHADOW_VCPU(r5)
/* Save R1/R2 in the PACA */
PPC_STL r1, SVCPU_HOST_R1(r5)
PPC_STL r2, SVCPU_HOST_R2(r5)
/* XXX swap in/out on load? */
PPC_LL r3, VCPU_HIGHMEM_HANDLER(r4)
PPC_STL r3, SVCPU_VMHANDLER(r5)
kvm_start_lightweight:
PPC_LL r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
DISABLE_INTERRUPTS
#ifdef CONFIG_PPC_BOOK3S_64
/* Some guests may need to have dcbz set to 32 byte length.
*
* Usually we ensure that by patching the guest's instructions
* to trap on dcbz and emulate it in the hypervisor.
*
* If we can, we should tell the CPU to use 32 byte dcbz though,
* because that's a lot faster.
*/
PPC_LL r3, VCPU_HFLAGS(r4)
rldicl. r3, r3, 0, 63 /* CR = ((r3 & 1) == 0) */
beq no_dcbz32_on
mfspr r3,SPRN_HID5
ori r3, r3, 0x80 /* XXX HID5_dcbz32 = 0x80 */
mtspr SPRN_HID5,r3
no_dcbz32_on:
#endif /* CONFIG_PPC_BOOK3S_64 */
PPC_LL r6, VCPU_RMCALL(r4)
mtctr r6
PPC_LL r3, VCPU_TRAMPOLINE_ENTER(r4)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL & ~(MSR_IR | MSR_DR))
/* Jump to segment patching handler and into our guest */
bctr
/*
* This is the handler in module memory. It gets jumped at from the
* lowmem trampoline code, so it's basically the guest exit code.
*
*/
.global kvmppc_handler_highmem
kvmppc_handler_highmem:
/*
* Register usage at this point:
*
* R1 = host R1
* R2 = host R2
* R12 = exit handler id
* R13 = PACA
* SVCPU.* = guest *
*
*/
/* R7 = vcpu */
PPC_LL r7, GPR4(r1)
#ifdef CONFIG_PPC_BOOK3S_64
PPC_LL r5, VCPU_HFLAGS(r7)
rldicl. r5, r5, 0, 63 /* CR = ((r5 & 1) == 0) */
beq no_dcbz32_off
li r4, 0
mfspr r5,SPRN_HID5
rldimi r5,r4,6,56
mtspr SPRN_HID5,r5
no_dcbz32_off:
#endif /* CONFIG_PPC_BOOK3S_64 */
PPC_STL r14, VCPU_GPR(r14)(r7)
PPC_STL r15, VCPU_GPR(r15)(r7)
PPC_STL r16, VCPU_GPR(r16)(r7)
PPC_STL r17, VCPU_GPR(r17)(r7)
PPC_STL r18, VCPU_GPR(r18)(r7)
PPC_STL r19, VCPU_GPR(r19)(r7)
PPC_STL r20, VCPU_GPR(r20)(r7)
PPC_STL r21, VCPU_GPR(r21)(r7)
PPC_STL r22, VCPU_GPR(r22)(r7)
PPC_STL r23, VCPU_GPR(r23)(r7)
PPC_STL r24, VCPU_GPR(r24)(r7)
PPC_STL r25, VCPU_GPR(r25)(r7)
PPC_STL r26, VCPU_GPR(r26)(r7)
PPC_STL r27, VCPU_GPR(r27)(r7)
PPC_STL r28, VCPU_GPR(r28)(r7)
PPC_STL r29, VCPU_GPR(r29)(r7)
PPC_STL r30, VCPU_GPR(r30)(r7)
PPC_STL r31, VCPU_GPR(r31)(r7)
/* Restore host msr -> SRR1 */
PPC_LL r6, VCPU_HOST_MSR(r7)
/*
* For some interrupts, we need to call the real Linux
* handler, so it can do work for us. This has to happen
* as if the interrupt arrived from the kernel though,
* so let's fake it here where most state is restored.
*
* Call Linux for hardware interrupts/decrementer
* r3 = address of interrupt handler (exit reason)
*/
cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
beq call_linux_handler
cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER
beq call_linux_handler
cmpwi r12, BOOK3S_INTERRUPT_PERFMON
beq call_linux_handler
/* Back to EE=1 */
mtmsr r6
sync
b kvm_return_point
call_linux_handler:
/*
* If we land here we need to jump back to the handler we
* came from.
*
* We have a page that we can access from real mode, so let's
* jump back to that and use it as a trampoline to get back into the
* interrupt handler!
*
* R3 still contains the exit code,
* R5 VCPU_HOST_RETIP and
* R6 VCPU_HOST_MSR
*/
/* Restore host IP -> SRR0 */
PPC_LL r5, VCPU_HOST_RETIP(r7)
/* XXX Better move to a safe function?
* What if we get an HTAB flush in between mtsrr0 and mtsrr1? */
mtlr r12
PPC_LL r4, VCPU_TRAMPOLINE_LOWMEM(r7)
mtsrr0 r4
LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
mtsrr1 r3
RFI
.global kvm_return_point
kvm_return_point:
/* Jump back to lightweight entry if we're supposed to */
/* go back into the guest */
/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
mr r5, r12
/* Restore r3 (kvm_run) and r4 (vcpu) */
REST_2GPRS(3, r1)
bl FUNC(kvmppc_handle_exit)
/* If RESUME_GUEST, get back in the loop */
cmpwi r3, RESUME_GUEST
beq kvm_loop_lightweight
cmpwi r3, RESUME_GUEST_NV
beq kvm_loop_heavyweight
kvm_exit_loop:
PPC_LL r4, _LINK(r1)
mtlr r4
/* Restore non-volatile host registers (r14 - r31) */
REST_NVGPRS(r1)
addi r1, r1, SWITCH_FRAME_SIZE
blr
kvm_loop_heavyweight:
PPC_LL r4, _LINK(r1)
PPC_STL r4, (PPC_LR_STKOFF + SWITCH_FRAME_SIZE)(r1)
/* Load vcpu and cpu_run */
REST_2GPRS(3, r1)
/* Load non-volatile guest state from the vcpu */
VCPU_LOAD_NVGPRS(r4)
/* Jump back into the beginning of this function */
b kvm_start_lightweight
kvm_loop_lightweight:
/* We'll need the vcpu pointer */
REST_GPR(4, r1)
/* Jump back into the beginning of this function */
b kvm_start_lightweight