https://github.com/torvalds/linux
Tip revision: 66f41d4c5c8a5deed66fdcc84509376c9a0bf9d8 authored by Linus Torvalds on 30 April 2010, 03:02:05 UTC
Linux 2.6.34-rc6
Linux 2.6.34-rc6
Tip revision: 66f41d4
mmconf-fam10h_64.c
/*
* AMD Family 10h mmconfig enablement
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/range.h>
#include <asm/pci-direct.h>
#include <linux/sort.h>
#include <asm/io.h>
#include <asm/msr.h>
#include <asm/acpi.h>
#include <asm/mmconfig.h>
#include <asm/pci_x86.h>
struct pci_hostbridge_probe {
u32 bus;
u32 slot;
u32 vendor;
u32 device;
};
static u64 __cpuinitdata fam10h_pci_mmconf_base;
static int __cpuinitdata fam10h_pci_mmconf_base_status;
static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
};
static int __cpuinit cmp_range(const void *x1, const void *x2)
{
const struct range *r1 = x1;
const struct range *r2 = x2;
int start1, start2;
start1 = r1->start >> 32;
start2 = r2->start >> 32;
return start1 - start2;
}
/*[47:0] */
/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
static void __cpuinit get_fam10h_pci_mmconf_base(void)
{
int i;
unsigned bus;
unsigned slot;
int found;
u64 val;
u32 address;
u64 tom2;
u64 base = FAM10H_PCI_MMCONF_BASE;
int hi_mmio_num;
struct range range[8];
/* only try to get setting from BSP */
/* -1 or 1 */
if (fam10h_pci_mmconf_base_status)
return;
if (!early_pci_allowed())
goto fail;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
u16 vendor;
bus = pci_probes[i].bus;
slot = pci_probes[i].slot;
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
found = 1;
break;
}
}
if (!found)
goto fail;
/* SYS_CFG */
address = MSR_K8_SYSCFG;
rdmsrl(address, val);
/* TOP_MEM2 is not enabled? */
if (!(val & (1<<21))) {
tom2 = 0;
} else {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
tom2 = val & (0xffffULL<<32);
}
if (base <= tom2)
base = tom2 + (1ULL<<32);
/*
* need to check if the range is in the high mmio range that is
* above 4G
*/
hi_mmio_num = 0;
for (i = 0; i < 8; i++) {
u32 reg;
u64 start;
u64 end;
reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
if (!(reg & 3))
continue;
start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
if (!end)
continue;
range[hi_mmio_num].start = start;
range[hi_mmio_num].end = end;
hi_mmio_num++;
}
if (!hi_mmio_num)
goto out;
/* sort the range */
sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL);
if (range[hi_mmio_num - 1].end < base)
goto out;
if (range[0].start > base)
goto out;
/* need to find one window */
base = range[0].start - (1ULL << 32);
if ((base > tom2) && BASE_VALID(base))
goto out;
base = range[hi_mmio_num - 1].end + (1ULL << 32);
if ((base > tom2) && BASE_VALID(base))
goto out;
/* need to find window between ranges */
if (hi_mmio_num > 1)
for (i = 0; i < hi_mmio_num - 1; i++) {
if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
base = range[i].end + (1ULL << 32);
if ((base > tom2) && BASE_VALID(base))
goto out;
}
}
fail:
fam10h_pci_mmconf_base_status = -1;
return;
out:
fam10h_pci_mmconf_base = base;
fam10h_pci_mmconf_base_status = 1;
}
void __cpuinit fam10h_check_enable_mmcfg(void)
{
u64 val;
u32 address;
if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
return;
address = MSR_FAM10H_MMIO_CONF_BASE;
rdmsrl(address, val);
/* try to make sure that AP's setting is identical to BSP setting */
if (val & FAM10H_MMIO_CONF_ENABLE) {
unsigned busnbits;
busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
FAM10H_MMIO_CONF_BUSRANGE_MASK;
/* only trust the one handle 256 buses, if acpi=off */
if (!acpi_pci_disabled || busnbits >= 8) {
u64 base;
base = val & (0xffffULL << 32);
if (fam10h_pci_mmconf_base_status <= 0) {
fam10h_pci_mmconf_base = base;
fam10h_pci_mmconf_base_status = 1;
return;
} else if (fam10h_pci_mmconf_base == base)
return;
}
}
/*
* if it is not enabled, try to enable it and assume only one segment
* with 256 buses
*/
get_fam10h_pci_mmconf_base();
if (fam10h_pci_mmconf_base_status <= 0)
return;
printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
(FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT));
val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) |
FAM10H_MMIO_CONF_ENABLE;
wrmsrl(address, val);
}
static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
},
},
{}
};
void __cpuinit check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}