https://github.com/torvalds/linux
Tip revision: 4b119e21d0c66c22e8ca03df05d9de623d0eb50f authored by Linus Torvalds on 17 April 2008, 02:49:44 UTC
Linux 2.6.25
Linux 2.6.25
Tip revision: 4b119e2
setup.c
/*
* Machine specific setup for generic
*/
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/arch_hooks.h>
#include <asm/e820.h>
#include <asm/setup.h>
#ifdef CONFIG_HOTPLUG_CPU
#define DEFAULT_SEND_IPI (1)
#else
#define DEFAULT_SEND_IPI (0)
#endif
int no_broadcast=DEFAULT_SEND_IPI;
/**
* pre_intr_init_hook - initialisation prior to setting up interrupt vectors
*
* Description:
* Perform any necessary interrupt initialisation prior to setting up
* the "ordinary" interrupt call gates. For legacy reasons, the ISA
* interrupts should be initialised here if the machine emulates a PC
* in any way.
**/
void __init pre_intr_init_hook(void)
{
init_ISA_irqs();
}
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
static struct irqaction irq2 = {
.handler = no_action,
.mask = CPU_MASK_NONE,
.name = "cascade",
};
/**
* intr_init_hook - post gate setup interrupt initialisation
*
* Description:
* Fill in any interrupts that may have been left out by the general
* init_IRQ() routine. interrupts having to do with the machine rather
* than the devices on the I/O bus (like APIC interrupts in intel MP
* systems) are started here.
**/
void __init intr_init_hook(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
apic_intr_init();
#endif
if (!acpi_ioapic)
setup_irq(2, &irq2);
}
/**
* pre_setup_arch_hook - hook called prior to any setup_arch() execution
*
* Description:
* generally used to activate any machine specific identification
* routines that may be needed before setup_arch() runs. On VISWS
* this is used to get the board revision and type.
**/
void __init pre_setup_arch_hook(void)
{
}
/**
* trap_init_hook - initialise system specific traps
*
* Description:
* Called as the final act of trap_init(). Used in VISWS to initialise
* the various board specific APIC traps.
**/
void __init trap_init_hook(void)
{
}
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
.mask = CPU_MASK_NONE,
.name = "timer"
};
/**
* time_init_hook - do any specific initialisations for the system timer.
*
* Description:
* Must plug the system timer interrupt source at HZ into the IRQ listed
* in irq_vectors.h:TIMER_IRQ
**/
void __init time_init_hook(void)
{
irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
#ifdef CONFIG_MCA
/**
* mca_nmi_hook - hook into MCA specific NMI chain
*
* Description:
* The MCA (Microchannel Architecture) has an NMI chain for NMI sources
* along the MCA bus. Use this to hook into that chain if you will need
* it.
**/
void mca_nmi_hook(void)
{
/* If I recall correctly, there's a whole bunch of other things that
* we can do to check for NMI problems, but that's all I know about
* at the moment.
*/
printk("NMI generated from unknown source!\n");
}
#endif
static __init int no_ipi_broadcast(char *str)
{
get_option(&str, &no_broadcast);
printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
"IPI Broadcast");
return 1;
}
__setup("no_ipi_broadcast=", no_ipi_broadcast);
static int __init print_ipi_mode(void)
{
printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
"Shortcut");
return 0;
}
late_initcall(print_ipi_mode);
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
*
* Description:
* This is included late in kernel/setup.c so that it can make
* use of all of the static functions.
**/
char * __init machine_specific_memory_setup(void)
{
char *who;
who = "BIOS-e820";
/*
* Try to copy the BIOS-supplied E820-map.
*
* Otherwise fake a memory map; one section from 0k->640k,
* the next section from 1mb->appropriate_mem_k
*/
sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
< 0) {
unsigned long mem_size;
/* compare results from other methods and take the greater */
if (boot_params.alt_mem_k
< boot_params.screen_info.ext_mem_k) {
mem_size = boot_params.screen_info.ext_mem_k;
who = "BIOS-88";
} else {
mem_size = boot_params.alt_mem_k;
who = "BIOS-e801";
}
e820.nr_map = 0;
add_memory_region(0, LOWMEMSIZE(), E820_RAM);
add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
}
return who;
}