https://github.com/torvalds/linux
Tip revision: 4fe89d07dcc2804c8b562f6c7896a45643d34b2f authored by Linus Torvalds on 02 October 2022, 21:09:07 UTC
Linux 6.0
Linux 6.0
Tip revision: 4fe89d0
tlb.c
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/export.h>
#include <linux/cpu.h>
#include <linux/debugfs.h>
#include <linux/sched/smt.h>
#include <linux/task_work.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/nospec-branch.h>
#include <asm/cache.h>
#include <asm/cacheflush.h>
#include <asm/apic.h>
#include <asm/perf_event.h>
#include "mm_internal.h"
#ifdef CONFIG_PARAVIRT
# define STATIC_NOPV
#else
# define STATIC_NOPV static
# define __flush_tlb_local native_flush_tlb_local
# define __flush_tlb_global native_flush_tlb_global
# define __flush_tlb_one_user(addr) native_flush_tlb_one_user(addr)
# define __flush_tlb_multi(msk, info) native_flush_tlb_multi(msk, info)
#endif
/*
* TLB flushing, formerly SMP-only
* c/o Linus Torvalds.
*
* These mean you can really definitely utterly forget about
* writing to user space from interrupts. (Its not allowed anyway).
*
* Optimizations Manfred Spraul <manfred@colorfullife.com>
*
* More scalable flush, from Andi Kleen
*
* Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
*/
/*
* Bits to mangle the TIF_SPEC_* state into the mm pointer which is
* stored in cpu_tlb_state.last_user_mm_spec.
*/
#define LAST_USER_MM_IBPB 0x1UL
#define LAST_USER_MM_L1D_FLUSH 0x2UL
#define LAST_USER_MM_SPEC_MASK (LAST_USER_MM_IBPB | LAST_USER_MM_L1D_FLUSH)
/* Bits to set when tlbstate and flush is (re)initialized */
#define LAST_USER_MM_INIT LAST_USER_MM_IBPB
/*
* The x86 feature is called PCID (Process Context IDentifier). It is similar
* to what is traditionally called ASID on the RISC processors.
*
* We don't use the traditional ASID implementation, where each process/mm gets
* its own ASID and flush/restart when we run out of ASID space.
*
* Instead we have a small per-cpu array of ASIDs and cache the last few mm's
* that came by on this CPU, allowing cheaper switch_mm between processes on
* this CPU.
*
* We end up with different spaces for different things. To avoid confusion we
* use different names for each of them:
*
* ASID - [0, TLB_NR_DYN_ASIDS-1]
* the canonical identifier for an mm
*
* kPCID - [1, TLB_NR_DYN_ASIDS]
* the value we write into the PCID part of CR3; corresponds to the
* ASID+1, because PCID 0 is special.
*
* uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
* for KPTI each mm has two address spaces and thus needs two
* PCID values, but we can still do with a single ASID denomination
* for each mm. Corresponds to kPCID + 2048.
*
*/
/* There are 12 bits of space for ASIDS in CR3 */
#define CR3_HW_ASID_BITS 12
/*
* When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
* user/kernel switches
*/
#ifdef CONFIG_PAGE_TABLE_ISOLATION
# define PTI_CONSUMED_PCID_BITS 1
#else
# define PTI_CONSUMED_PCID_BITS 0
#endif
#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
/*
* ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account
* for them being zero-based. Another -1 is because PCID 0 is reserved for
* use by non-PCID-aware users.
*/
#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
/*
* Given @asid, compute kPCID
*/
static inline u16 kern_pcid(u16 asid)
{
VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
#ifdef CONFIG_PAGE_TABLE_ISOLATION
/*
* Make sure that the dynamic ASID space does not conflict with the
* bit we are using to switch between user and kernel ASIDs.
*/
BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
/*
* The ASID being passed in here should have respected the
* MAX_ASID_AVAILABLE and thus never have the switch bit set.
*/
VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
#endif
/*
* The dynamically-assigned ASIDs that get passed in are small
* (<TLB_NR_DYN_ASIDS). They never have the high switch bit set,
* so do not bother to clear it.
*
* If PCID is on, ASID-aware code paths put the ASID+1 into the
* PCID bits. This serves two purposes. It prevents a nasty
* situation in which PCID-unaware code saves CR3, loads some other
* value (with PCID == 0), and then restores CR3, thus corrupting
* the TLB for ASID 0 if the saved ASID was nonzero. It also means
* that any bugs involving loading a PCID-enabled CR3 with
* CR4.PCIDE off will trigger deterministically.
*/
return asid + 1;
}
/*
* Given @asid, compute uPCID
*/
static inline u16 user_pcid(u16 asid)
{
u16 ret = kern_pcid(asid);
#ifdef CONFIG_PAGE_TABLE_ISOLATION
ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
#endif
return ret;
}
static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
{
if (static_cpu_has(X86_FEATURE_PCID)) {
return __sme_pa(pgd) | kern_pcid(asid);
} else {
VM_WARN_ON_ONCE(asid != 0);
return __sme_pa(pgd);
}
}
static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
{
VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
/*
* Use boot_cpu_has() instead of this_cpu_has() as this function
* might be called during early boot. This should work even after
* boot because all CPU's the have same capabilities:
*/
VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
}
/*
* We get here when we do something requiring a TLB invalidation
* but could not go invalidate all of the contexts. We do the
* necessary invalidation by clearing out the 'ctx_id' which
* forces a TLB flush when the context is loaded.
*/
static void clear_asid_other(void)
{
u16 asid;
/*
* This is only expected to be set if we have disabled
* kernel _PAGE_GLOBAL pages.
*/
if (!static_cpu_has(X86_FEATURE_PTI)) {
WARN_ON_ONCE(1);
return;
}
for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) {
/* Do not need to flush the current asid */
if (asid == this_cpu_read(cpu_tlbstate.loaded_mm_asid))
continue;
/*
* Make sure the next time we go to switch to
* this asid, we do a flush:
*/
this_cpu_write(cpu_tlbstate.ctxs[asid].ctx_id, 0);
}
this_cpu_write(cpu_tlbstate.invalidate_other, false);
}
atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
u16 *new_asid, bool *need_flush)
{
u16 asid;
if (!static_cpu_has(X86_FEATURE_PCID)) {
*new_asid = 0;
*need_flush = true;
return;
}
if (this_cpu_read(cpu_tlbstate.invalidate_other))
clear_asid_other();
for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) {
if (this_cpu_read(cpu_tlbstate.ctxs[asid].ctx_id) !=
next->context.ctx_id)
continue;
*new_asid = asid;
*need_flush = (this_cpu_read(cpu_tlbstate.ctxs[asid].tlb_gen) <
next_tlb_gen);
return;
}
/*
* We don't currently own an ASID slot on this CPU.
* Allocate a slot.
*/
*new_asid = this_cpu_add_return(cpu_tlbstate.next_asid, 1) - 1;
if (*new_asid >= TLB_NR_DYN_ASIDS) {
*new_asid = 0;
this_cpu_write(cpu_tlbstate.next_asid, 1);
}
*need_flush = true;
}
/*
* Given an ASID, flush the corresponding user ASID. We can delay this
* until the next time we switch to it.
*
* See SWITCH_TO_USER_CR3.
*/
static inline void invalidate_user_asid(u16 asid)
{
/* There is no user ASID if address space separation is off */
if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
return;
/*
* We only have a single ASID if PCID is off and the CR3
* write will have flushed it.
*/
if (!cpu_feature_enabled(X86_FEATURE_PCID))
return;
if (!static_cpu_has(X86_FEATURE_PTI))
return;
__set_bit(kern_pcid(asid),
(unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
}
static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush)
{
unsigned long new_mm_cr3;
if (need_flush) {
invalidate_user_asid(new_asid);
new_mm_cr3 = build_cr3(pgdir, new_asid);
} else {
new_mm_cr3 = build_cr3_noflush(pgdir, new_asid);
}
/*
* Caution: many callers of this function expect
* that load_cr3() is serializing and orders TLB
* fills with respect to the mm_cpumask writes.
*/
write_cr3(new_mm_cr3);
}
void leave_mm(int cpu)
{
struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
/*
* It's plausible that we're in lazy TLB mode while our mm is init_mm.
* If so, our callers still expect us to flush the TLB, but there
* aren't any user TLB entries in init_mm to worry about.
*
* This needs to happen before any other sanity checks due to
* intel_idle's shenanigans.
*/
if (loaded_mm == &init_mm)
return;
/* Warn if we're not lazy. */
WARN_ON(!this_cpu_read(cpu_tlbstate_shared.is_lazy));
switch_mm(NULL, &init_mm, NULL);
}
EXPORT_SYMBOL_GPL(leave_mm);
void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned long flags;
local_irq_save(flags);
switch_mm_irqs_off(prev, next, tsk);
local_irq_restore(flags);
}
/*
* Invoked from return to user/guest by a task that opted-in to L1D
* flushing but ended up running on an SMT enabled core due to wrong
* affinity settings or CPU hotplug. This is part of the paranoid L1D flush
* contract which this task requested.
*/
static void l1d_flush_force_sigbus(struct callback_head *ch)
{
force_sig(SIGBUS);
}
static void l1d_flush_evaluate(unsigned long prev_mm, unsigned long next_mm,
struct task_struct *next)
{
/* Flush L1D if the outgoing task requests it */
if (prev_mm & LAST_USER_MM_L1D_FLUSH)
wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH);
/* Check whether the incoming task opted in for L1D flush */
if (likely(!(next_mm & LAST_USER_MM_L1D_FLUSH)))
return;
/*
* Validate that it is not running on an SMT sibling as this would
* make the excercise pointless because the siblings share L1D. If
* it runs on a SMT sibling, notify it with SIGBUS on return to
* user/guest
*/
if (this_cpu_read(cpu_info.smt_active)) {
clear_ti_thread_flag(&next->thread_info, TIF_SPEC_L1D_FLUSH);
next->l1d_flush_kill.func = l1d_flush_force_sigbus;
task_work_add(next, &next->l1d_flush_kill, TWA_RESUME);
}
}
static unsigned long mm_mangle_tif_spec_bits(struct task_struct *next)
{
unsigned long next_tif = read_task_thread_flags(next);
unsigned long spec_bits = (next_tif >> TIF_SPEC_IB) & LAST_USER_MM_SPEC_MASK;
/*
* Ensure that the bit shift above works as expected and the two flags
* end up in bit 0 and 1.
*/
BUILD_BUG_ON(TIF_SPEC_L1D_FLUSH != TIF_SPEC_IB + 1);
return (unsigned long)next->mm | spec_bits;
}
static void cond_mitigation(struct task_struct *next)
{
unsigned long prev_mm, next_mm;
if (!next || !next->mm)
return;
next_mm = mm_mangle_tif_spec_bits(next);
prev_mm = this_cpu_read(cpu_tlbstate.last_user_mm_spec);
/*
* Avoid user/user BTB poisoning by flushing the branch predictor
* when switching between processes. This stops one process from
* doing Spectre-v2 attacks on another.
*
* Both, the conditional and the always IBPB mode use the mm
* pointer to avoid the IBPB when switching between tasks of the
* same process. Using the mm pointer instead of mm->context.ctx_id
* opens a hypothetical hole vs. mm_struct reuse, which is more or
* less impossible to control by an attacker. Aside of that it
* would only affect the first schedule so the theoretically
* exposed data is not really interesting.
*/
if (static_branch_likely(&switch_mm_cond_ibpb)) {
/*
* This is a bit more complex than the always mode because
* it has to handle two cases:
*
* 1) Switch from a user space task (potential attacker)
* which has TIF_SPEC_IB set to a user space task
* (potential victim) which has TIF_SPEC_IB not set.
*
* 2) Switch from a user space task (potential attacker)
* which has TIF_SPEC_IB not set to a user space task
* (potential victim) which has TIF_SPEC_IB set.
*
* This could be done by unconditionally issuing IBPB when
* a task which has TIF_SPEC_IB set is either scheduled in
* or out. Though that results in two flushes when:
*
* - the same user space task is scheduled out and later
* scheduled in again and only a kernel thread ran in
* between.
*
* - a user space task belonging to the same process is
* scheduled in after a kernel thread ran in between
*
* - a user space task belonging to the same process is
* scheduled in immediately.
*
* Optimize this with reasonably small overhead for the
* above cases. Mangle the TIF_SPEC_IB bit into the mm
* pointer of the incoming task which is stored in
* cpu_tlbstate.last_user_mm_spec for comparison.
*
* Issue IBPB only if the mm's are different and one or
* both have the IBPB bit set.
*/
if (next_mm != prev_mm &&
(next_mm | prev_mm) & LAST_USER_MM_IBPB)
indirect_branch_prediction_barrier();
}
if (static_branch_unlikely(&switch_mm_always_ibpb)) {
/*
* Only flush when switching to a user space task with a
* different context than the user space task which ran
* last on this CPU.
*/
if ((prev_mm & ~LAST_USER_MM_SPEC_MASK) !=
(unsigned long)next->mm)
indirect_branch_prediction_barrier();
}
if (static_branch_unlikely(&switch_mm_cond_l1d_flush)) {
/*
* Flush L1D when the outgoing task requested it and/or
* check whether the incoming task requested L1D flushing
* and ended up on an SMT sibling.
*/
if (unlikely((prev_mm | next_mm) & LAST_USER_MM_L1D_FLUSH))
l1d_flush_evaluate(prev_mm, next_mm, next);
}
this_cpu_write(cpu_tlbstate.last_user_mm_spec, next_mm);
}
#ifdef CONFIG_PERF_EVENTS
static inline void cr4_update_pce_mm(struct mm_struct *mm)
{
if (static_branch_unlikely(&rdpmc_always_available_key) ||
(!static_branch_unlikely(&rdpmc_never_available_key) &&
atomic_read(&mm->context.perf_rdpmc_allowed))) {
/*
* Clear the existing dirty counters to
* prevent the leak for an RDPMC task.
*/
perf_clear_dirty_counters();
cr4_set_bits_irqsoff(X86_CR4_PCE);
} else
cr4_clear_bits_irqsoff(X86_CR4_PCE);
}
void cr4_update_pce(void *ignored)
{
cr4_update_pce_mm(this_cpu_read(cpu_tlbstate.loaded_mm));
}
#else
static inline void cr4_update_pce_mm(struct mm_struct *mm) { }
#endif
void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm);
u16 prev_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
bool was_lazy = this_cpu_read(cpu_tlbstate_shared.is_lazy);
unsigned cpu = smp_processor_id();
u64 next_tlb_gen;
bool need_flush;
u16 new_asid;
/*
* NB: The scheduler will call us with prev == next when switching
* from lazy TLB mode to normal mode if active_mm isn't changing.
* When this happens, we don't assume that CR3 (and hence
* cpu_tlbstate.loaded_mm) matches next.
*
* NB: leave_mm() calls us with prev == NULL and tsk == NULL.
*/
/* We don't want flush_tlb_func() to run concurrently with us. */
if (IS_ENABLED(CONFIG_PROVE_LOCKING))
WARN_ON_ONCE(!irqs_disabled());
/*
* Verify that CR3 is what we think it is. This will catch
* hypothetical buggy code that directly switches to swapper_pg_dir
* without going through leave_mm() / switch_mm_irqs_off() or that
* does something like write_cr3(read_cr3_pa()).
*
* Only do this check if CONFIG_DEBUG_VM=y because __read_cr3()
* isn't free.
*/
#ifdef CONFIG_DEBUG_VM
if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) {
/*
* If we were to BUG here, we'd be very likely to kill
* the system so hard that we don't see the call trace.
* Try to recover instead by ignoring the error and doing
* a global flush to minimize the chance of corruption.
*
* (This is far from being a fully correct recovery.
* Architecturally, the CPU could prefetch something
* back into an incorrect ASID slot and leave it there
* to cause trouble down the road. It's better than
* nothing, though.)
*/
__flush_tlb_all();
}
#endif
if (was_lazy)
this_cpu_write(cpu_tlbstate_shared.is_lazy, false);
/*
* The membarrier system call requires a full memory barrier and
* core serialization before returning to user-space, after
* storing to rq->curr, when changing mm. This is because
* membarrier() sends IPIs to all CPUs that are in the target mm
* to make them issue memory barriers. However, if another CPU
* switches to/from the target mm concurrently with
* membarrier(), it can cause that CPU not to receive an IPI
* when it really should issue a memory barrier. Writing to CR3
* provides that full memory barrier and core serializing
* instruction.
*/
if (real_prev == next) {
VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
next->context.ctx_id);
/*
* Even in lazy TLB mode, the CPU should stay set in the
* mm_cpumask. The TLB shootdown code can figure out from
* cpu_tlbstate_shared.is_lazy whether or not to send an IPI.
*/
if (WARN_ON_ONCE(real_prev != &init_mm &&
!cpumask_test_cpu(cpu, mm_cpumask(next))))
cpumask_set_cpu(cpu, mm_cpumask(next));
/*
* If the CPU is not in lazy TLB mode, we are just switching
* from one thread in a process to another thread in the same
* process. No TLB flush required.
*/
if (!was_lazy)
return;
/*
* Read the tlb_gen to check whether a flush is needed.
* If the TLB is up to date, just use it.
* The barrier synchronizes with the tlb_gen increment in
* the TLB shootdown code.
*/
smp_mb();
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) ==
next_tlb_gen)
return;
/*
* TLB contents went out of date while we were in lazy
* mode. Fall through to the TLB switching code below.
*/
new_asid = prev_asid;
need_flush = true;
} else {
/*
* Apply process to process speculation vulnerability
* mitigations if applicable.
*/
cond_mitigation(tsk);
/*
* Stop remote flushes for the previous mm.
* Skip kernel threads; we never send init_mm TLB flushing IPIs,
* but the bitmap manipulation can cause cache line contention.
*/
if (real_prev != &init_mm) {
VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu,
mm_cpumask(real_prev)));
cpumask_clear_cpu(cpu, mm_cpumask(real_prev));
}
/*
* Start remote flushes and then read tlb_gen.
*/
if (next != &init_mm)
cpumask_set_cpu(cpu, mm_cpumask(next));
next_tlb_gen = atomic64_read(&next->context.tlb_gen);
choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush);
/* Let nmi_uaccess_okay() know that we're changing CR3. */
this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING);
barrier();
}
if (need_flush) {
this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
load_new_mm_cr3(next->pgd, new_asid, true);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
} else {
/* The new ASID is already up to date. */
load_new_mm_cr3(next->pgd, new_asid, false);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0);
}
/* Make sure we write CR3 before loaded_mm. */
barrier();
this_cpu_write(cpu_tlbstate.loaded_mm, next);
this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid);
if (next != real_prev) {
cr4_update_pce_mm(next);
switch_ldt(real_prev, next);
}
}
/*
* Please ignore the name of this function. It should be called
* switch_to_kernel_thread().
*
* enter_lazy_tlb() is a hint from the scheduler that we are entering a
* kernel thread or other context without an mm. Acceptable implementations
* include doing nothing whatsoever, switching to init_mm, or various clever
* lazy tricks to try to minimize TLB flushes.
*
* The scheduler reserves the right to call enter_lazy_tlb() several times
* in a row. It will notify us that we're going back to a real mm by
* calling switch_mm_irqs_off().
*/
void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm)
return;
this_cpu_write(cpu_tlbstate_shared.is_lazy, true);
}
/*
* Call this when reinitializing a CPU. It fixes the following potential
* problems:
*
* - The ASID changed from what cpu_tlbstate thinks it is (most likely
* because the CPU was taken down and came back up with CR3's PCID
* bits clear. CPU hotplug can do this.
*
* - The TLB contains junk in slots corresponding to inactive ASIDs.
*
* - The CPU went so far out to lunch that it may have missed a TLB
* flush.
*/
void initialize_tlbstate_and_flush(void)
{
int i;
struct mm_struct *mm = this_cpu_read(cpu_tlbstate.loaded_mm);
u64 tlb_gen = atomic64_read(&init_mm.context.tlb_gen);
unsigned long cr3 = __read_cr3();
/* Assert that CR3 already references the right mm. */
WARN_ON((cr3 & CR3_ADDR_MASK) != __pa(mm->pgd));
/*
* Assert that CR4.PCIDE is set if needed. (CR4.PCIDE initialization
* doesn't work like other CR4 bits because it can only be set from
* long mode.)
*/
WARN_ON(boot_cpu_has(X86_FEATURE_PCID) &&
!(cr4_read_shadow() & X86_CR4_PCIDE));
/* Force ASID 0 and force a TLB flush. */
write_cr3(build_cr3(mm->pgd, 0));
/* Reinitialize tlbstate. */
this_cpu_write(cpu_tlbstate.last_user_mm_spec, LAST_USER_MM_INIT);
this_cpu_write(cpu_tlbstate.loaded_mm_asid, 0);
this_cpu_write(cpu_tlbstate.next_asid, 1);
this_cpu_write(cpu_tlbstate.ctxs[0].ctx_id, mm->context.ctx_id);
this_cpu_write(cpu_tlbstate.ctxs[0].tlb_gen, tlb_gen);
for (i = 1; i < TLB_NR_DYN_ASIDS; i++)
this_cpu_write(cpu_tlbstate.ctxs[i].ctx_id, 0);
}
/*
* flush_tlb_func()'s memory ordering requirement is that any
* TLB fills that happen after we flush the TLB are ordered after we
* read active_mm's tlb_gen. We don't need any explicit barriers
* because all x86 flush operations are serializing and the
* atomic64_read operation won't be reordered by the compiler.
*/
static void flush_tlb_func(void *info)
{
/*
* We have three different tlb_gen values in here. They are:
*
* - mm_tlb_gen: the latest generation.
* - local_tlb_gen: the generation that this CPU has already caught
* up to.
* - f->new_tlb_gen: the generation that the requester of the flush
* wants us to catch up to.
*/
const struct flush_tlb_info *f = info;
struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
u64 local_tlb_gen = this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen);
bool local = smp_processor_id() == f->initiating_cpu;
unsigned long nr_invalidate = 0;
u64 mm_tlb_gen;
/* This code cannot presently handle being reentered. */
VM_WARN_ON(!irqs_disabled());
if (!local) {
inc_irq_stat(irq_tlb_count);
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
/* Can only happen on remote CPUs */
if (f->mm && f->mm != loaded_mm)
return;
}
if (unlikely(loaded_mm == &init_mm))
return;
VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].ctx_id) !=
loaded_mm->context.ctx_id);
if (this_cpu_read(cpu_tlbstate_shared.is_lazy)) {
/*
* We're in lazy mode. We need to at least flush our
* paging-structure cache to avoid speculatively reading
* garbage into our TLB. Since switching to init_mm is barely
* slower than a minimal flush, just switch to init_mm.
*
* This should be rare, with native_flush_tlb_multi() skipping
* IPIs to lazy TLB mode CPUs.
*/
switch_mm_irqs_off(NULL, &init_mm, NULL);
return;
}
if (unlikely(f->new_tlb_gen != TLB_GENERATION_INVALID &&
f->new_tlb_gen <= local_tlb_gen)) {
/*
* The TLB is already up to date in respect to f->new_tlb_gen.
* While the core might be still behind mm_tlb_gen, checking
* mm_tlb_gen unnecessarily would have negative caching effects
* so avoid it.
*/
return;
}
/*
* Defer mm_tlb_gen reading as long as possible to avoid cache
* contention.
*/
mm_tlb_gen = atomic64_read(&loaded_mm->context.tlb_gen);
if (unlikely(local_tlb_gen == mm_tlb_gen)) {
/*
* There's nothing to do: we're already up to date. This can
* happen if two concurrent flushes happen -- the first flush to
* be handled can catch us all the way up, leaving no work for
* the second flush.
*/
goto done;
}
WARN_ON_ONCE(local_tlb_gen > mm_tlb_gen);
WARN_ON_ONCE(f->new_tlb_gen > mm_tlb_gen);
/*
* If we get to this point, we know that our TLB is out of date.
* This does not strictly imply that we need to flush (it's
* possible that f->new_tlb_gen <= local_tlb_gen), but we're
* going to need to flush in the very near future, so we might
* as well get it over with.
*
* The only question is whether to do a full or partial flush.
*
* We do a partial flush if requested and two extra conditions
* are met:
*
* 1. f->new_tlb_gen == local_tlb_gen + 1. We have an invariant that
* we've always done all needed flushes to catch up to
* local_tlb_gen. If, for example, local_tlb_gen == 2 and
* f->new_tlb_gen == 3, then we know that the flush needed to bring
* us up to date for tlb_gen 3 is the partial flush we're
* processing.
*
* As an example of why this check is needed, suppose that there
* are two concurrent flushes. The first is a full flush that
* changes context.tlb_gen from 1 to 2. The second is a partial
* flush that changes context.tlb_gen from 2 to 3. If they get
* processed on this CPU in reverse order, we'll see
* local_tlb_gen == 1, mm_tlb_gen == 3, and end != TLB_FLUSH_ALL.
* If we were to use __flush_tlb_one_user() and set local_tlb_gen to
* 3, we'd be break the invariant: we'd update local_tlb_gen above
* 1 without the full flush that's needed for tlb_gen 2.
*
* 2. f->new_tlb_gen == mm_tlb_gen. This is purely an optimization.
* Partial TLB flushes are not all that much cheaper than full TLB
* flushes, so it seems unlikely that it would be a performance win
* to do a partial flush if that won't bring our TLB fully up to
* date. By doing a full flush instead, we can increase
* local_tlb_gen all the way to mm_tlb_gen and we can probably
* avoid another flush in the very near future.
*/
if (f->end != TLB_FLUSH_ALL &&
f->new_tlb_gen == local_tlb_gen + 1 &&
f->new_tlb_gen == mm_tlb_gen) {
/* Partial flush */
unsigned long addr = f->start;
/* Partial flush cannot have invalid generations */
VM_WARN_ON(f->new_tlb_gen == TLB_GENERATION_INVALID);
/* Partial flush must have valid mm */
VM_WARN_ON(f->mm == NULL);
nr_invalidate = (f->end - f->start) >> f->stride_shift;
while (addr < f->end) {
flush_tlb_one_user(addr);
addr += 1UL << f->stride_shift;
}
if (local)
count_vm_tlb_events(NR_TLB_LOCAL_FLUSH_ONE, nr_invalidate);
} else {
/* Full flush. */
nr_invalidate = TLB_FLUSH_ALL;
flush_tlb_local();
if (local)
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
}
/* Both paths above update our state to mm_tlb_gen. */
this_cpu_write(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen, mm_tlb_gen);
/* Tracing is done in a unified manner to reduce the code size */
done:
trace_tlb_flush(!local ? TLB_REMOTE_SHOOTDOWN :
(f->mm == NULL) ? TLB_LOCAL_SHOOTDOWN :
TLB_LOCAL_MM_SHOOTDOWN,
nr_invalidate);
}
static bool tlb_is_not_lazy(int cpu, void *data)
{
return !per_cpu(cpu_tlbstate_shared.is_lazy, cpu);
}
DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state_shared, cpu_tlbstate_shared);
EXPORT_PER_CPU_SYMBOL(cpu_tlbstate_shared);
STATIC_NOPV void native_flush_tlb_multi(const struct cpumask *cpumask,
const struct flush_tlb_info *info)
{
/*
* Do accounting and tracing. Note that there are (and have always been)
* cases in which a remote TLB flush will be traced, but eventually
* would not happen.
*/
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
if (info->end == TLB_FLUSH_ALL)
trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
else
trace_tlb_flush(TLB_REMOTE_SEND_IPI,
(info->end - info->start) >> PAGE_SHIFT);
/*
* If no page tables were freed, we can skip sending IPIs to
* CPUs in lazy TLB mode. They will flush the CPU themselves
* at the next context switch.
*
* However, if page tables are getting freed, we need to send the
* IPI everywhere, to prevent CPUs in lazy TLB mode from tripping
* up on the new contents of what used to be page tables, while
* doing a speculative memory access.
*/
if (info->freed_tables)
on_each_cpu_mask(cpumask, flush_tlb_func, (void *)info, true);
else
on_each_cpu_cond_mask(tlb_is_not_lazy, flush_tlb_func,
(void *)info, 1, cpumask);
}
void flush_tlb_multi(const struct cpumask *cpumask,
const struct flush_tlb_info *info)
{
__flush_tlb_multi(cpumask, info);
}
/*
* See Documentation/x86/tlb.rst for details. We choose 33
* because it is large enough to cover the vast majority (at
* least 95%) of allocations, and is small enough that we are
* confident it will not cause too much overhead. Each single
* flush is about 100 ns, so this caps the maximum overhead at
* _about_ 3,000 ns.
*
* This is in units of pages.
*/
unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
static DEFINE_PER_CPU_SHARED_ALIGNED(struct flush_tlb_info, flush_tlb_info);
#ifdef CONFIG_DEBUG_VM
static DEFINE_PER_CPU(unsigned int, flush_tlb_info_idx);
#endif
static struct flush_tlb_info *get_flush_tlb_info(struct mm_struct *mm,
unsigned long start, unsigned long end,
unsigned int stride_shift, bool freed_tables,
u64 new_tlb_gen)
{
struct flush_tlb_info *info = this_cpu_ptr(&flush_tlb_info);
#ifdef CONFIG_DEBUG_VM
/*
* Ensure that the following code is non-reentrant and flush_tlb_info
* is not overwritten. This means no TLB flushing is initiated by
* interrupt handlers and machine-check exception handlers.
*/
BUG_ON(this_cpu_inc_return(flush_tlb_info_idx) != 1);
#endif
info->start = start;
info->end = end;
info->mm = mm;
info->stride_shift = stride_shift;
info->freed_tables = freed_tables;
info->new_tlb_gen = new_tlb_gen;
info->initiating_cpu = smp_processor_id();
return info;
}
static void put_flush_tlb_info(void)
{
#ifdef CONFIG_DEBUG_VM
/* Complete reentrancy prevention checks */
barrier();
this_cpu_dec(flush_tlb_info_idx);
#endif
}
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned int stride_shift,
bool freed_tables)
{
struct flush_tlb_info *info;
u64 new_tlb_gen;
int cpu;
cpu = get_cpu();
/* Should we flush just the requested range? */
if ((end == TLB_FLUSH_ALL) ||
((end - start) >> stride_shift) > tlb_single_page_flush_ceiling) {
start = 0;
end = TLB_FLUSH_ALL;
}
/* This is also a barrier that synchronizes with switch_mm(). */
new_tlb_gen = inc_mm_tlb_gen(mm);
info = get_flush_tlb_info(mm, start, end, stride_shift, freed_tables,
new_tlb_gen);
/*
* flush_tlb_multi() is not optimized for the common case in which only
* a local TLB flush is needed. Optimize this use-case by calling
* flush_tlb_func_local() directly in this case.
*/
if (cpumask_any_but(mm_cpumask(mm), cpu) < nr_cpu_ids) {
flush_tlb_multi(mm_cpumask(mm), info);
} else if (mm == this_cpu_read(cpu_tlbstate.loaded_mm)) {
lockdep_assert_irqs_enabled();
local_irq_disable();
flush_tlb_func(info);
local_irq_enable();
}
put_flush_tlb_info();
put_cpu();
}
static void do_flush_tlb_all(void *info)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
__flush_tlb_all();
}
void flush_tlb_all(void)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
static void do_kernel_range_flush(void *info)
{
struct flush_tlb_info *f = info;
unsigned long addr;
/* flush range by one by one 'invlpg' */
for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
flush_tlb_one_kernel(addr);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
/* Balance as user space task's flush, a bit conservative */
if (end == TLB_FLUSH_ALL ||
(end - start) > tlb_single_page_flush_ceiling << PAGE_SHIFT) {
on_each_cpu(do_flush_tlb_all, NULL, 1);
} else {
struct flush_tlb_info *info;
preempt_disable();
info = get_flush_tlb_info(NULL, start, end, 0, false,
TLB_GENERATION_INVALID);
on_each_cpu(do_kernel_range_flush, info, 1);
put_flush_tlb_info();
preempt_enable();
}
}
/*
* This can be used from process context to figure out what the value of
* CR3 is without needing to do a (slow) __read_cr3().
*
* It's intended to be used for code like KVM that sneakily changes CR3
* and needs to restore it. It needs to be used very carefully.
*/
unsigned long __get_current_cr3_fast(void)
{
unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
this_cpu_read(cpu_tlbstate.loaded_mm_asid));
/* For now, be very restrictive about when this can be called. */
VM_WARN_ON(in_nmi() || preemptible());
VM_BUG_ON(cr3 != __read_cr3());
return cr3;
}
EXPORT_SYMBOL_GPL(__get_current_cr3_fast);
/*
* Flush one page in the kernel mapping
*/
void flush_tlb_one_kernel(unsigned long addr)
{
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
/*
* If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
* paravirt equivalent. Even with PCID, this is sufficient: we only
* use PCID if we also use global PTEs for the kernel mapping, and
* INVLPG flushes global translations across all address spaces.
*
* If PTI is on, then the kernel is mapped with non-global PTEs, and
* __flush_tlb_one_user() will flush the given address for the current
* kernel address space and for its usermode counterpart, but it does
* not flush it for other address spaces.
*/
flush_tlb_one_user(addr);
if (!static_cpu_has(X86_FEATURE_PTI))
return;
/*
* See above. We need to propagate the flush to all other address
* spaces. In principle, we only need to propagate it to kernelmode
* address spaces, but the extra bookkeeping we would need is not
* worth it.
*/
this_cpu_write(cpu_tlbstate.invalidate_other, true);
}
/*
* Flush one page in the user mapping
*/
STATIC_NOPV void native_flush_tlb_one_user(unsigned long addr)
{
u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
if (!static_cpu_has(X86_FEATURE_PTI))
return;
/*
* Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
* Just use invalidate_user_asid() in case we are called early.
*/
if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
invalidate_user_asid(loaded_mm_asid);
else
invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
}
void flush_tlb_one_user(unsigned long addr)
{
__flush_tlb_one_user(addr);
}
/*
* Flush everything
*/
STATIC_NOPV void native_flush_tlb_global(void)
{
unsigned long flags;
if (static_cpu_has(X86_FEATURE_INVPCID)) {
/*
* Using INVPCID is considerably faster than a pair of writes
* to CR4 sandwiched inside an IRQ flag save/restore.
*
* Note, this works with CR4.PCIDE=0 or 1.
*/
invpcid_flush_all();
return;
}
/*
* Read-modify-write to CR4 - protect it from preemption and
* from interrupts. (Use the raw variant because this code can
* be called from deep inside debugging code.)
*/
raw_local_irq_save(flags);
__native_tlb_flush_global(this_cpu_read(cpu_tlbstate.cr4));
raw_local_irq_restore(flags);
}
/*
* Flush the entire current user mapping
*/
STATIC_NOPV void native_flush_tlb_local(void)
{
/*
* Preemption or interrupts must be disabled to protect the access
* to the per CPU variable and to prevent being preempted between
* read_cr3() and write_cr3().
*/
WARN_ON_ONCE(preemptible());
invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
/* If current->mm == NULL then the read_cr3() "borrows" an mm */
native_write_cr3(__native_read_cr3());
}
void flush_tlb_local(void)
{
__flush_tlb_local();
}
/*
* Flush everything
*/
void __flush_tlb_all(void)
{
/*
* This is to catch users with enabled preemption and the PGE feature
* and don't trigger the warning in __native_flush_tlb().
*/
VM_WARN_ON_ONCE(preemptible());
if (boot_cpu_has(X86_FEATURE_PGE)) {
__flush_tlb_global();
} else {
/*
* !PGE -> !PCID (setup_pcid()), thus every flush is total.
*/
flush_tlb_local();
}
}
EXPORT_SYMBOL_GPL(__flush_tlb_all);
void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
{
struct flush_tlb_info *info;
int cpu = get_cpu();
info = get_flush_tlb_info(NULL, 0, TLB_FLUSH_ALL, 0, false,
TLB_GENERATION_INVALID);
/*
* flush_tlb_multi() is not optimized for the common case in which only
* a local TLB flush is needed. Optimize this use-case by calling
* flush_tlb_func_local() directly in this case.
*/
if (cpumask_any_but(&batch->cpumask, cpu) < nr_cpu_ids) {
flush_tlb_multi(&batch->cpumask, info);
} else if (cpumask_test_cpu(cpu, &batch->cpumask)) {
lockdep_assert_irqs_enabled();
local_irq_disable();
flush_tlb_func(info);
local_irq_enable();
}
cpumask_clear(&batch->cpumask);
put_flush_tlb_info();
put_cpu();
}
/*
* Blindly accessing user memory from NMI context can be dangerous
* if we're in the middle of switching the current user task or
* switching the loaded mm. It can also be dangerous if we
* interrupted some kernel code that was temporarily using a
* different mm.
*/
bool nmi_uaccess_okay(void)
{
struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
struct mm_struct *current_mm = current->mm;
VM_WARN_ON_ONCE(!loaded_mm);
/*
* The condition we want to check is
* current_mm->pgd == __va(read_cr3_pa()). This may be slow, though,
* if we're running in a VM with shadow paging, and nmi_uaccess_okay()
* is supposed to be reasonably fast.
*
* Instead, we check the almost equivalent but somewhat conservative
* condition below, and we rely on the fact that switch_mm_irqs_off()
* sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
*/
if (loaded_mm != current_mm)
return false;
VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
return true;
}
static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[32];
unsigned int len;
len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t tlbflush_write_file(struct file *file,
const char __user *user_buf, size_t count, loff_t *ppos)
{
char buf[32];
ssize_t len;
int ceiling;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (kstrtoint(buf, 0, &ceiling))
return -EINVAL;
if (ceiling < 0)
return -EINVAL;
tlb_single_page_flush_ceiling = ceiling;
return count;
}
static const struct file_operations fops_tlbflush = {
.read = tlbflush_read_file,
.write = tlbflush_write_file,
.llseek = default_llseek,
};
static int __init create_tlb_single_page_flush_ceiling(void)
{
debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlbflush);
return 0;
}
late_initcall(create_tlb_single_page_flush_ceiling);