https://github.com/torvalds/linux
Tip revision: e8d018dd0257f744ca50a729e3d042cf2ec9da65 authored by Linus Torvalds on 19 March 2023, 20:27:55 UTC
Linux 6.3-rc3
Linux 6.3-rc3
Tip revision: e8d018d
Kconfig
# SPDX-License-Identifier: GPL-2.0
#
# Generic algorithms support
#
config XOR_BLOCKS
tristate
#
# async_tx api: hardware offloaded memory transfer/transform support
#
source "crypto/async_tx/Kconfig"
#
# Cryptographic API Configuration
#
menuconfig CRYPTO
tristate "Cryptographic API"
select CRYPTO_LIB_UTILS
help
This option provides the core Cryptographic API.
if CRYPTO
menu "Crypto core or helper"
config CRYPTO_FIPS
bool "FIPS 200 compliance"
depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
depends on (MODULE_SIG || !MODULES)
help
This option enables the fips boot option which is
required if you want the system to operate in a FIPS 200
certification. You should say no unless you know what
this is.
config CRYPTO_FIPS_NAME
string "FIPS Module Name"
default "Linux Kernel Cryptographic API"
depends on CRYPTO_FIPS
help
This option sets the FIPS Module name reported by the Crypto API via
the /proc/sys/crypto/fips_name file.
config CRYPTO_FIPS_CUSTOM_VERSION
bool "Use Custom FIPS Module Version"
depends on CRYPTO_FIPS
default n
config CRYPTO_FIPS_VERSION
string "FIPS Module Version"
default "(none)"
depends on CRYPTO_FIPS_CUSTOM_VERSION
help
This option provides the ability to override the FIPS Module Version.
By default the KERNELRELEASE value is used.
config CRYPTO_ALGAPI
tristate
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
tristate
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
config CRYPTO_AEAD2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_NULL2
select CRYPTO_RNG2
config CRYPTO_SKCIPHER
tristate
select CRYPTO_SKCIPHER2
select CRYPTO_ALGAPI
config CRYPTO_SKCIPHER2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_RNG2
config CRYPTO_HASH
tristate
select CRYPTO_HASH2
select CRYPTO_ALGAPI
config CRYPTO_HASH2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG
tristate
select CRYPTO_RNG2
select CRYPTO_ALGAPI
config CRYPTO_RNG2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_RNG_DEFAULT
tristate
select CRYPTO_DRBG_MENU
config CRYPTO_AKCIPHER2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_AKCIPHER
tristate
select CRYPTO_AKCIPHER2
select CRYPTO_ALGAPI
config CRYPTO_KPP2
tristate
select CRYPTO_ALGAPI2
config CRYPTO_KPP
tristate
select CRYPTO_ALGAPI
select CRYPTO_KPP2
config CRYPTO_ACOMP2
tristate
select CRYPTO_ALGAPI2
select SGL_ALLOC
config CRYPTO_ACOMP
tristate
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
config CRYPTO_MANAGER2
def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
select CRYPTO_AEAD2
select CRYPTO_HASH2
select CRYPTO_SKCIPHER2
select CRYPTO_AKCIPHER2
select CRYPTO_KPP2
select CRYPTO_ACOMP2
config CRYPTO_USER
tristate "Userspace cryptographic algorithm configuration"
depends on NET
select CRYPTO_MANAGER
help
Userspace configuration for cryptographic instantiations such as
cbc(aes).
config CRYPTO_MANAGER_DISABLE_TESTS
bool "Disable run-time self tests"
default y
help
Disable run-time self tests that normally take place at
algorithm registration.
config CRYPTO_MANAGER_EXTRA_TESTS
bool "Enable extra run-time crypto self tests"
depends on DEBUG_KERNEL && !CRYPTO_MANAGER_DISABLE_TESTS && CRYPTO_MANAGER
help
Enable extra run-time self tests of registered crypto algorithms,
including randomized fuzz tests.
This is intended for developer use only, as these tests take much
longer to run than the normal self tests.
config CRYPTO_NULL
tristate "Null algorithms"
select CRYPTO_NULL2
help
These are 'Null' algorithms, used by IPsec, which do nothing.
config CRYPTO_NULL2
tristate
select CRYPTO_ALGAPI2
select CRYPTO_SKCIPHER2
select CRYPTO_HASH2
config CRYPTO_PCRYPT
tristate "Parallel crypto engine"
depends on SMP
select PADATA
select CRYPTO_MANAGER
select CRYPTO_AEAD
help
This converts an arbitrary crypto algorithm into a parallel
algorithm that executes in kernel threads.
config CRYPTO_CRYPTD
tristate "Software async crypto daemon"
select CRYPTO_SKCIPHER
select CRYPTO_HASH
select CRYPTO_MANAGER
help
This is a generic software asynchronous crypto daemon that
converts an arbitrary synchronous software crypto algorithm
into an asynchronous algorithm that executes in a kernel thread.
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
select CRYPTO_NULL
help
Authenc: Combined mode wrapper for IPsec.
This is required for IPSec ESP (XFRM_ESP).
config CRYPTO_TEST
tristate "Testing module"
depends on m || EXPERT
select CRYPTO_MANAGER
help
Quick & dirty crypto test module.
config CRYPTO_SIMD
tristate
select CRYPTO_CRYPTD
config CRYPTO_ENGINE
tristate
endmenu
menu "Public-key cryptography"
config CRYPTO_RSA
tristate "RSA (Rivest-Shamir-Adleman)"
select CRYPTO_AKCIPHER
select CRYPTO_MANAGER
select MPILIB
select ASN1
help
RSA (Rivest-Shamir-Adleman) public key algorithm (RFC8017)
config CRYPTO_DH
tristate "DH (Diffie-Hellman)"
select CRYPTO_KPP
select MPILIB
help
DH (Diffie-Hellman) key exchange algorithm
config CRYPTO_DH_RFC7919_GROUPS
bool "RFC 7919 FFDHE groups"
depends on CRYPTO_DH
select CRYPTO_RNG_DEFAULT
help
FFDHE (Finite-Field-based Diffie-Hellman Ephemeral) groups
defined in RFC7919.
Support these finite-field groups in DH key exchanges:
- ffdhe2048, ffdhe3072, ffdhe4096, ffdhe6144, ffdhe8192
If unsure, say N.
config CRYPTO_ECC
tristate
select CRYPTO_RNG_DEFAULT
config CRYPTO_ECDH
tristate "ECDH (Elliptic Curve Diffie-Hellman)"
select CRYPTO_ECC
select CRYPTO_KPP
help
ECDH (Elliptic Curve Diffie-Hellman) key exchange algorithm
using curves P-192, P-256, and P-384 (FIPS 186)
config CRYPTO_ECDSA
tristate "ECDSA (Elliptic Curve Digital Signature Algorithm)"
select CRYPTO_ECC
select CRYPTO_AKCIPHER
select ASN1
help
ECDSA (Elliptic Curve Digital Signature Algorithm) (FIPS 186,
ISO/IEC 14888-3)
using curves P-192, P-256, and P-384
Only signature verification is implemented.
config CRYPTO_ECRDSA
tristate "EC-RDSA (Elliptic Curve Russian Digital Signature Algorithm)"
select CRYPTO_ECC
select CRYPTO_AKCIPHER
select CRYPTO_STREEBOG
select OID_REGISTRY
select ASN1
help
Elliptic Curve Russian Digital Signature Algorithm (GOST R 34.10-2012,
RFC 7091, ISO/IEC 14888-3)
One of the Russian cryptographic standard algorithms (called GOST
algorithms). Only signature verification is implemented.
config CRYPTO_SM2
tristate "SM2 (ShangMi 2)"
select CRYPTO_SM3
select CRYPTO_AKCIPHER
select CRYPTO_MANAGER
select MPILIB
select ASN1
help
SM2 (ShangMi 2) public key algorithm
Published by State Encryption Management Bureau, China,
as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012.
References:
https://datatracker.ietf.org/doc/draft-shen-sm2-ecdsa/
http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml
http://www.gmbz.org.cn/main/bzlb.html
config CRYPTO_CURVE25519
tristate "Curve25519"
select CRYPTO_KPP
select CRYPTO_LIB_CURVE25519_GENERIC
help
Curve25519 elliptic curve (RFC7748)
endmenu
menu "Block ciphers"
config CRYPTO_AES
tristate "AES (Advanced Encryption Standard)"
select CRYPTO_ALGAPI
select CRYPTO_LIB_AES
help
AES cipher algorithms (Rijndael)(FIPS-197, ISO/IEC 18033-3)
Rijndael appears to be consistently a very good performer in
both hardware and software across a wide range of computing
environments regardless of its use in feedback or non-feedback
modes. Its key setup time is excellent, and its key agility is
good. Rijndael's very low memory requirements make it very well
suited for restricted-space environments, in which it also
demonstrates excellent performance. Rijndael's operations are
among the easiest to defend against power and timing attacks.
The AES specifies three key sizes: 128, 192 and 256 bits
config CRYPTO_AES_TI
tristate "AES (Advanced Encryption Standard) (fixed time)"
select CRYPTO_ALGAPI
select CRYPTO_LIB_AES
help
AES cipher algorithms (Rijndael)(FIPS-197, ISO/IEC 18033-3)
This is a generic implementation of AES that attempts to eliminate
data dependent latencies as much as possible without affecting
performance too much. It is intended for use by the generic CCM
and GCM drivers, and other CTR or CMAC/XCBC based modes that rely
solely on encryption (although decryption is supported as well, but
with a more dramatic performance hit)
Instead of using 16 lookup tables of 1 KB each, (8 for encryption and
8 for decryption), this implementation only uses just two S-boxes of
256 bytes each, and attempts to eliminate data dependent latencies by
prefetching the entire table into the cache at the start of each
block. Interrupts are also disabled to avoid races where cachelines
are evicted when the CPU is interrupted to do something else.
config CRYPTO_ANUBIS
tristate "Anubis"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
select CRYPTO_ALGAPI
help
Anubis cipher algorithm
Anubis is a variable key length cipher which can use keys from
128 bits to 320 bits in length. It was evaluated as a entrant
in the NESSIE competition.
See https://web.archive.org/web/20160606112246/http://www.larc.usp.br/~pbarreto/AnubisPage.html
for further information.
config CRYPTO_ARIA
tristate "ARIA"
select CRYPTO_ALGAPI
help
ARIA cipher algorithm (RFC5794)
ARIA is a standard encryption algorithm of the Republic of Korea.
The ARIA specifies three key sizes and rounds.
128-bit: 12 rounds.
192-bit: 14 rounds.
256-bit: 16 rounds.
See:
https://seed.kisa.or.kr/kisa/algorithm/EgovAriaInfo.do
config CRYPTO_BLOWFISH
tristate "Blowfish"
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
Blowfish cipher algorithm, by Bruce Schneier
This is a variable key length cipher which can use keys from 32
bits to 448 bits in length. It's fast, simple and specifically
designed for use on "large microprocessors".
See https://www.schneier.com/blowfish.html for further information.
config CRYPTO_BLOWFISH_COMMON
tristate
help
Common parts of the Blowfish cipher algorithm shared by the
generic c and the assembler implementations.
config CRYPTO_CAMELLIA
tristate "Camellia"
select CRYPTO_ALGAPI
help
Camellia cipher algorithms (ISO/IEC 18033-3)
Camellia is a symmetric key block cipher developed jointly
at NTT and Mitsubishi Electric Corporation.
The Camellia specifies three key sizes: 128, 192 and 256 bits.
See https://info.isl.ntt.co.jp/crypt/eng/camellia/ for further information.
config CRYPTO_CAST_COMMON
tristate
help
Common parts of the CAST cipher algorithms shared by the
generic c and the assembler implementations.
config CRYPTO_CAST5
tristate "CAST5 (CAST-128)"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
CAST5 (CAST-128) cipher algorithm (RFC2144, ISO/IEC 18033-3)
config CRYPTO_CAST6
tristate "CAST6 (CAST-256)"
select CRYPTO_ALGAPI
select CRYPTO_CAST_COMMON
help
CAST6 (CAST-256) encryption algorithm (RFC2612)
config CRYPTO_DES
tristate "DES and Triple DES EDE"
select CRYPTO_ALGAPI
select CRYPTO_LIB_DES
help
DES (Data Encryption Standard)(FIPS 46-2, ISO/IEC 18033-3) and
Triple DES EDE (Encrypt/Decrypt/Encrypt) (FIPS 46-3, ISO/IEC 18033-3)
cipher algorithms
config CRYPTO_FCRYPT
tristate "FCrypt"
select CRYPTO_ALGAPI
select CRYPTO_SKCIPHER
help
FCrypt algorithm used by RxRPC
See https://ota.polyonymo.us/fcrypt-paper.txt
config CRYPTO_KHAZAD
tristate "Khazad"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
select CRYPTO_ALGAPI
help
Khazad cipher algorithm
Khazad was a finalist in the initial NESSIE competition. It is
an algorithm optimized for 64-bit processors with good performance
on 32-bit processors. Khazad uses an 128 bit key size.
See https://web.archive.org/web/20171011071731/http://www.larc.usp.br/~pbarreto/KhazadPage.html
for further information.
config CRYPTO_SEED
tristate "SEED"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
select CRYPTO_ALGAPI
help
SEED cipher algorithm (RFC4269, ISO/IEC 18033-3)
SEED is a 128-bit symmetric key block cipher that has been
developed by KISA (Korea Information Security Agency) as a
national standard encryption algorithm of the Republic of Korea.
It is a 16 round block cipher with the key size of 128 bit.
See https://seed.kisa.or.kr/kisa/algorithm/EgovSeedInfo.do
for further information.
config CRYPTO_SERPENT
tristate "Serpent"
select CRYPTO_ALGAPI
help
Serpent cipher algorithm, by Anderson, Biham & Knudsen
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
See https://www.cl.cam.ac.uk/~rja14/serpent.html for further information.
config CRYPTO_SM4
tristate
config CRYPTO_SM4_GENERIC
tristate "SM4 (ShangMi 4)"
select CRYPTO_ALGAPI
select CRYPTO_SM4
help
SM4 cipher algorithms (OSCCA GB/T 32907-2016,
ISO/IEC 18033-3:2010/Amd 1:2021)
SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.
SMS4 was originally created for use in protecting wireless
networks, and is mandated in the Chinese National Standard for
Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
(GB.15629.11-2003).
The latest SM4 standard (GBT.32907-2016) was proposed by OSCCA and
standardized through TC 260 of the Standardization Administration
of the People's Republic of China (SAC).
The input, output, and key of SMS4 are each 128 bits.
See https://eprint.iacr.org/2008/329.pdf for further information.
If unsure, say N.
config CRYPTO_TEA
tristate "TEA, XTEA and XETA"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
select CRYPTO_ALGAPI
help
TEA (Tiny Encryption Algorithm) cipher algorithms
Tiny Encryption Algorithm is a simple cipher that uses
many rounds for security. It is very fast and uses
little memory.
Xtendend Tiny Encryption Algorithm is a modification to
the TEA algorithm to address a potential key weakness
in the TEA algorithm.
Xtendend Encryption Tiny Algorithm is a mis-implementation
of the XTEA algorithm for compatibility purposes.
config CRYPTO_TWOFISH
tristate "Twofish"
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
help
Twofish cipher algorithm
Twofish was submitted as an AES (Advanced Encryption Standard)
candidate cipher by researchers at CounterPane Systems. It is a
16 round block cipher supporting key sizes of 128, 192, and 256
bits.
See https://www.schneier.com/twofish.html for further information.
config CRYPTO_TWOFISH_COMMON
tristate
help
Common parts of the Twofish cipher algorithm shared by the
generic c and the assembler implementations.
endmenu
menu "Length-preserving ciphers and modes"
config CRYPTO_ADIANTUM
tristate "Adiantum"
select CRYPTO_CHACHA20
select CRYPTO_LIB_POLY1305_GENERIC
select CRYPTO_NHPOLY1305
select CRYPTO_MANAGER
help
Adiantum tweakable, length-preserving encryption mode
Designed for fast and secure disk encryption, especially on
CPUs without dedicated crypto instructions. It encrypts
each sector using the XChaCha12 stream cipher, two passes of
an ε-almost-∆-universal hash function, and an invocation of
the AES-256 block cipher on a single 16-byte block. On CPUs
without AES instructions, Adiantum is much faster than
AES-XTS.
Adiantum's security is provably reducible to that of its
underlying stream and block ciphers, subject to a security
bound. Unlike XTS, Adiantum is a true wide-block encryption
mode, so it actually provides an even stronger notion of
security than XTS, subject to the security bound.
If unsure, say N.
config CRYPTO_ARC4
tristate "ARC4 (Alleged Rivest Cipher 4)"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
select CRYPTO_SKCIPHER
select CRYPTO_LIB_ARC4
help
ARC4 cipher algorithm
ARC4 is a stream cipher using keys ranging from 8 bits to 2048
bits in length. This algorithm is required for driver-based
WEP, but it should not be for other purposes because of the
weakness of the algorithm.
config CRYPTO_CHACHA20
tristate "ChaCha"
select CRYPTO_LIB_CHACHA_GENERIC
select CRYPTO_SKCIPHER
help
The ChaCha20, XChaCha20, and XChaCha12 stream cipher algorithms
ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J.
Bernstein and further specified in RFC7539 for use in IETF protocols.
This is the portable C implementation of ChaCha20. See
https://cr.yp.to/chacha/chacha-20080128.pdf for further information.
XChaCha20 is the application of the XSalsa20 construction to ChaCha20
rather than to Salsa20. XChaCha20 extends ChaCha20's nonce length
from 64 bits (or 96 bits using the RFC7539 convention) to 192 bits,
while provably retaining ChaCha20's security. See
https://cr.yp.to/snuffle/xsalsa-20081128.pdf for further information.
XChaCha12 is XChaCha20 reduced to 12 rounds, with correspondingly
reduced security margin but increased performance. It can be needed
in some performance-sensitive scenarios.
config CRYPTO_CBC
tristate "CBC (Cipher Block Chaining)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
CBC (Cipher Block Chaining) mode (NIST SP800-38A)
This block cipher mode is required for IPSec ESP (XFRM_ESP).
config CRYPTO_CFB
tristate "CFB (Cipher Feedback)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
CFB (Cipher Feedback) mode (NIST SP800-38A)
This block cipher mode is required for TPM2 Cryptography.
config CRYPTO_CTR
tristate "CTR (Counter)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
CTR (Counter) mode (NIST SP800-38A)
config CRYPTO_CTS
tristate "CTS (Cipher Text Stealing)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
CBC-CS3 variant of CTS (Cipher Text Stealing) (NIST
Addendum to SP800-38A (October 2010))
This mode is required for Kerberos gss mechanism support
for AES encryption.
config CRYPTO_ECB
tristate "ECB (Electronic Codebook)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
ECB (Electronic Codebook) mode (NIST SP800-38A)
config CRYPTO_HCTR2
tristate "HCTR2"
select CRYPTO_XCTR
select CRYPTO_POLYVAL
select CRYPTO_MANAGER
help
HCTR2 length-preserving encryption mode
A mode for storage encryption that is efficient on processors with
instructions to accelerate AES and carryless multiplication, e.g.
x86 processors with AES-NI and CLMUL, and ARM processors with the
ARMv8 crypto extensions.
See https://eprint.iacr.org/2021/1441
config CRYPTO_KEYWRAP
tristate "KW (AES Key Wrap)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
KW (AES Key Wrap) authenticated encryption mode (NIST SP800-38F
and RFC3394) without padding.
config CRYPTO_LRW
tristate "LRW (Liskov Rivest Wagner)"
select CRYPTO_LIB_GF128MUL
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
select CRYPTO_ECB
help
LRW (Liskov Rivest Wagner) mode
A tweakable, non malleable, non movable
narrow block cipher mode for dm-crypt. Use it with cipher
specification string aes-lrw-benbi, the key must be 256, 320 or 384.
The first 128, 192 or 256 bits in the key are used for AES and the
rest is used to tie each cipher block to its logical position.
See https://people.csail.mit.edu/rivest/pubs/LRW02.pdf
config CRYPTO_OFB
tristate "OFB (Output Feedback)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
OFB (Output Feedback) mode (NIST SP800-38A)
This mode makes a block cipher into a synchronous
stream cipher. It generates keystream blocks, which are then XORed
with the plaintext blocks to get the ciphertext. Flipping a bit in the
ciphertext produces a flipped bit in the plaintext at the same
location. This property allows many error correcting codes to function
normally even when applied before encryption.
config CRYPTO_PCBC
tristate "PCBC (Propagating Cipher Block Chaining)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
PCBC (Propagating Cipher Block Chaining) mode
This block cipher mode is required for RxRPC.
config CRYPTO_XCTR
tristate
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
help
XCTR (XOR Counter) mode for HCTR2
This blockcipher mode is a variant of CTR mode using XORs and little-endian
addition rather than big-endian arithmetic.
XCTR mode is used to implement HCTR2.
config CRYPTO_XTS
tristate "XTS (XOR Encrypt XOR with ciphertext stealing)"
select CRYPTO_SKCIPHER
select CRYPTO_MANAGER
select CRYPTO_ECB
help
XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
and IEEE 1619)
Use with aes-xts-plain, key size 256, 384 or 512 bits. This
implementation currently can't handle a sectorsize which is not a
multiple of 16 bytes.
config CRYPTO_NHPOLY1305
tristate
select CRYPTO_HASH
select CRYPTO_LIB_POLY1305_GENERIC
endmenu
menu "AEAD (authenticated encryption with associated data) ciphers"
config CRYPTO_AEGIS128
tristate "AEGIS-128"
select CRYPTO_AEAD
select CRYPTO_AES # for AES S-box tables
help
AEGIS-128 AEAD algorithm
config CRYPTO_AEGIS128_SIMD
bool "AEGIS-128 (arm NEON, arm64 NEON)"
depends on CRYPTO_AEGIS128 && ((ARM || ARM64) && KERNEL_MODE_NEON)
default y
help
AEGIS-128 AEAD algorithm
Architecture: arm or arm64 using:
- NEON (Advanced SIMD) extension
config CRYPTO_CHACHA20POLY1305
tristate "ChaCha20-Poly1305"
select CRYPTO_CHACHA20
select CRYPTO_POLY1305
select CRYPTO_AEAD
select CRYPTO_MANAGER
help
ChaCha20 stream cipher and Poly1305 authenticator combined
mode (RFC8439)
config CRYPTO_CCM
tristate "CCM (Counter with Cipher Block Chaining-MAC)"
select CRYPTO_CTR
select CRYPTO_HASH
select CRYPTO_AEAD
select CRYPTO_MANAGER
help
CCM (Counter with Cipher Block Chaining-Message Authentication Code)
authenticated encryption mode (NIST SP800-38C)
config CRYPTO_GCM
tristate "GCM (Galois/Counter Mode) and GMAC (GCM MAC)"
select CRYPTO_CTR
select CRYPTO_AEAD
select CRYPTO_GHASH
select CRYPTO_NULL
select CRYPTO_MANAGER
help
GCM (Galois/Counter Mode) authenticated encryption mode and GMAC
(GCM Message Authentication Code) (NIST SP800-38D)
This is required for IPSec ESP (XFRM_ESP).
config CRYPTO_SEQIV
tristate "Sequence Number IV Generator"
select CRYPTO_AEAD
select CRYPTO_SKCIPHER
select CRYPTO_NULL
select CRYPTO_RNG_DEFAULT
select CRYPTO_MANAGER
help
Sequence Number IV generator
This IV generator generates an IV based on a sequence number by
xoring it with a salt. This algorithm is mainly useful for CTR.
This is required for IPsec ESP (XFRM_ESP).
config CRYPTO_ECHAINIV
tristate "Encrypted Chain IV Generator"
select CRYPTO_AEAD
select CRYPTO_NULL
select CRYPTO_RNG_DEFAULT
select CRYPTO_MANAGER
help
Encrypted Chain IV generator
This IV generator generates an IV based on the encryption of
a sequence number xored with a salt. This is the default
algorithm for CBC.
config CRYPTO_ESSIV
tristate "Encrypted Salt-Sector IV Generator"
select CRYPTO_AUTHENC
help
Encrypted Salt-Sector IV generator
This IV generator is used in some cases by fscrypt and/or
dm-crypt. It uses the hash of the block encryption key as the
symmetric key for a block encryption pass applied to the input
IV, making low entropy IV sources more suitable for block
encryption.
This driver implements a crypto API template that can be
instantiated either as an skcipher or as an AEAD (depending on the
type of the first template argument), and which defers encryption
and decryption requests to the encapsulated cipher after applying
ESSIV to the input IV. Note that in the AEAD case, it is assumed
that the keys are presented in the same format used by the authenc
template, and that the IV appears at the end of the authenticated
associated data (AAD) region (which is how dm-crypt uses it.)
Note that the use of ESSIV is not recommended for new deployments,
and so this only needs to be enabled when interoperability with
existing encrypted volumes of filesystems is required, or when
building for a particular system that requires it (e.g., when
the SoC in question has accelerated CBC but not XTS, making CBC
combined with ESSIV the only feasible mode for h/w accelerated
block encryption)
endmenu
menu "Hashes, digests, and MACs"
config CRYPTO_BLAKE2B
tristate "BLAKE2b"
select CRYPTO_HASH
help
BLAKE2b cryptographic hash function (RFC 7693)
BLAKE2b is optimized for 64-bit platforms and can produce digests
of any size between 1 and 64 bytes. The keyed hash is also implemented.
This module provides the following algorithms:
- blake2b-160
- blake2b-256
- blake2b-384
- blake2b-512
Used by the btrfs filesystem.
See https://blake2.net for further information.
config CRYPTO_CMAC
tristate "CMAC (Cipher-based MAC)"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
CMAC (Cipher-based Message Authentication Code) authentication
mode (NIST SP800-38B and IETF RFC4493)
config CRYPTO_GHASH
tristate "GHASH"
select CRYPTO_HASH
select CRYPTO_LIB_GF128MUL
help
GCM GHASH function (NIST SP800-38D)
config CRYPTO_HMAC
tristate "HMAC (Keyed-Hash MAC)"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
HMAC (Keyed-Hash Message Authentication Code) (FIPS 198 and
RFC2104)
This is required for IPsec AH (XFRM_AH) and IPsec ESP (XFRM_ESP).
config CRYPTO_MD4
tristate "MD4"
select CRYPTO_HASH
help
MD4 message digest algorithm (RFC1320)
config CRYPTO_MD5
tristate "MD5"
select CRYPTO_HASH
help
MD5 message digest algorithm (RFC1321)
config CRYPTO_MICHAEL_MIC
tristate "Michael MIC"
select CRYPTO_HASH
help
Michael MIC (Message Integrity Code) (IEEE 802.11i)
Defined by the IEEE 802.11i TKIP (Temporal Key Integrity Protocol),
known as WPA (Wif-Fi Protected Access).
This algorithm is required for TKIP, but it should not be used for
other purposes because of the weakness of the algorithm.
config CRYPTO_POLYVAL
tristate
select CRYPTO_HASH
select CRYPTO_LIB_GF128MUL
help
POLYVAL hash function for HCTR2
This is used in HCTR2. It is not a general-purpose
cryptographic hash function.
config CRYPTO_POLY1305
tristate "Poly1305"
select CRYPTO_HASH
select CRYPTO_LIB_POLY1305_GENERIC
help
Poly1305 authenticator algorithm (RFC7539)
Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
config CRYPTO_RMD160
tristate "RIPEMD-160"
select CRYPTO_HASH
help
RIPEMD-160 hash function (ISO/IEC 10118-3)
RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
to be used as a secure replacement for the 128-bit hash functions
MD4, MD5 and its predecessor RIPEMD
(not to be confused with RIPEMD-128).
Its speed is comparable to SHA-1 and there are no known attacks
against RIPEMD-160.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
See https://homes.esat.kuleuven.be/~bosselae/ripemd160.html
for further information.
config CRYPTO_SHA1
tristate "SHA-1"
select CRYPTO_HASH
select CRYPTO_LIB_SHA1
help
SHA-1 secure hash algorithm (FIPS 180, ISO/IEC 10118-3)
config CRYPTO_SHA256
tristate "SHA-224 and SHA-256"
select CRYPTO_HASH
select CRYPTO_LIB_SHA256
help
SHA-224 and SHA-256 secure hash algorithms (FIPS 180, ISO/IEC 10118-3)
This is required for IPsec AH (XFRM_AH) and IPsec ESP (XFRM_ESP).
Used by the btrfs filesystem, Ceph, NFS, and SMB.
config CRYPTO_SHA512
tristate "SHA-384 and SHA-512"
select CRYPTO_HASH
help
SHA-384 and SHA-512 secure hash algorithms (FIPS 180, ISO/IEC 10118-3)
config CRYPTO_SHA3
tristate "SHA-3"
select CRYPTO_HASH
help
SHA-3 secure hash algorithms (FIPS 202, ISO/IEC 10118-3)
config CRYPTO_SM3
tristate
config CRYPTO_SM3_GENERIC
tristate "SM3 (ShangMi 3)"
select CRYPTO_HASH
select CRYPTO_SM3
help
SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012, ISO/IEC 10118-3)
This is part of the Chinese Commercial Cryptography suite.
References:
http://www.oscca.gov.cn/UpFile/20101222141857786.pdf
https://datatracker.ietf.org/doc/html/draft-shen-sm3-hash
config CRYPTO_STREEBOG
tristate "Streebog"
select CRYPTO_HASH
help
Streebog Hash Function (GOST R 34.11-2012, RFC 6986, ISO/IEC 10118-3)
This is one of the Russian cryptographic standard algorithms (called
GOST algorithms). This setting enables two hash algorithms with
256 and 512 bits output.
References:
https://tc26.ru/upload/iblock/fed/feddbb4d26b685903faa2ba11aea43f6.pdf
https://tools.ietf.org/html/rfc6986
config CRYPTO_VMAC
tristate "VMAC"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
VMAC is a message authentication algorithm designed for
very high speed on 64-bit architectures.
See https://fastcrypto.org/vmac for further information.
config CRYPTO_WP512
tristate "Whirlpool"
select CRYPTO_HASH
help
Whirlpool hash function (ISO/IEC 10118-3)
512, 384 and 256-bit hashes.
Whirlpool-512 is part of the NESSIE cryptographic primitives.
See https://web.archive.org/web/20171129084214/http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html
for further information.
config CRYPTO_XCBC
tristate "XCBC-MAC (Extended Cipher Block Chaining MAC)"
select CRYPTO_HASH
select CRYPTO_MANAGER
help
XCBC-MAC (Extended Cipher Block Chaining Message Authentication
Code) (RFC3566)
config CRYPTO_XXHASH
tristate "xxHash"
select CRYPTO_HASH
select XXHASH
help
xxHash non-cryptographic hash algorithm
Extremely fast, working at speeds close to RAM limits.
Used by the btrfs filesystem.
endmenu
menu "CRCs (cyclic redundancy checks)"
config CRYPTO_CRC32C
tristate "CRC32c"
select CRYPTO_HASH
select CRC32
help
CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720)
A 32-bit CRC (cyclic redundancy check) with a polynomial defined
by G. Castagnoli, S. Braeuer and M. Herrman in "Optimization of Cyclic
Redundancy-Check Codes with 24 and 32 Parity Bits", IEEE Transactions
on Communications, Vol. 41, No. 6, June 1993, selected for use with
iSCSI.
Used by btrfs, ext4, jbd2, NVMeoF/TCP, and iSCSI.
config CRYPTO_CRC32
tristate "CRC32"
select CRYPTO_HASH
select CRC32
help
CRC32 CRC algorithm (IEEE 802.3)
Used by RoCEv2 and f2fs.
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF"
select CRYPTO_HASH
help
CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
CRC algorithm used by the SCSI Block Commands standard.
config CRYPTO_CRC64_ROCKSOFT
tristate "CRC64 based on Rocksoft Model algorithm"
depends on CRC64
select CRYPTO_HASH
help
CRC64 CRC algorithm based on the Rocksoft Model CRC Algorithm
Used by the NVMe implementation of T10 DIF (BLK_DEV_INTEGRITY)
See https://zlib.net/crc_v3.txt
endmenu
menu "Compression"
config CRYPTO_DEFLATE
tristate "Deflate"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select ZLIB_INFLATE
select ZLIB_DEFLATE
help
Deflate compression algorithm (RFC1951)
Used by IPSec with the IPCOMP protocol (RFC3173, RFC2394)
config CRYPTO_LZO
tristate "LZO"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZO_COMPRESS
select LZO_DECOMPRESS
help
LZO compression algorithm
See https://www.oberhumer.com/opensource/lzo/ for further information.
config CRYPTO_842
tristate "842"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select 842_COMPRESS
select 842_DECOMPRESS
help
842 compression algorithm by IBM
See https://github.com/plauth/lib842 for further information.
config CRYPTO_LZ4
tristate "LZ4"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZ4_COMPRESS
select LZ4_DECOMPRESS
help
LZ4 compression algorithm
See https://github.com/lz4/lz4 for further information.
config CRYPTO_LZ4HC
tristate "LZ4HC"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select LZ4HC_COMPRESS
select LZ4_DECOMPRESS
help
LZ4 high compression mode algorithm
See https://github.com/lz4/lz4 for further information.
config CRYPTO_ZSTD
tristate "Zstd"
select CRYPTO_ALGAPI
select CRYPTO_ACOMP2
select ZSTD_COMPRESS
select ZSTD_DECOMPRESS
help
zstd compression algorithm
See https://github.com/facebook/zstd for further information.
endmenu
menu "Random number generation"
config CRYPTO_ANSI_CPRNG
tristate "ANSI PRNG (Pseudo Random Number Generator)"
select CRYPTO_AES
select CRYPTO_RNG
help
Pseudo RNG (random number generator) (ANSI X9.31 Appendix A.2.4)
This uses the AES cipher algorithm.
Note that this option must be enabled if CRYPTO_FIPS is selected
menuconfig CRYPTO_DRBG_MENU
tristate "NIST SP800-90A DRBG (Deterministic Random Bit Generator)"
help
DRBG (Deterministic Random Bit Generator) (NIST SP800-90A)
In the following submenu, one or more of the DRBG types must be selected.
if CRYPTO_DRBG_MENU
config CRYPTO_DRBG_HMAC
bool
default y
select CRYPTO_HMAC
select CRYPTO_SHA512
config CRYPTO_DRBG_HASH
bool "Hash_DRBG"
select CRYPTO_SHA256
help
Hash_DRBG variant as defined in NIST SP800-90A.
This uses the SHA-1, SHA-256, SHA-384, or SHA-512 hash algorithms.
config CRYPTO_DRBG_CTR
bool "CTR_DRBG"
select CRYPTO_AES
select CRYPTO_CTR
help
CTR_DRBG variant as defined in NIST SP800-90A.
This uses the AES cipher algorithm with the counter block mode.
config CRYPTO_DRBG
tristate
default CRYPTO_DRBG_MENU
select CRYPTO_RNG
select CRYPTO_JITTERENTROPY
endif # if CRYPTO_DRBG_MENU
config CRYPTO_JITTERENTROPY
tristate "CPU Jitter Non-Deterministic RNG (Random Number Generator)"
select CRYPTO_RNG
help
CPU Jitter RNG (Random Number Generator) from the Jitterentropy library
A non-physical non-deterministic ("true") RNG (e.g., an entropy source
compliant with NIST SP800-90B) intended to provide a seed to a
deterministic RNG (e.g. per NIST SP800-90C).
This RNG does not perform any cryptographic whitening of the generated
See https://www.chronox.de/jent.html
config CRYPTO_KDF800108_CTR
tristate
select CRYPTO_HMAC
select CRYPTO_SHA256
endmenu
menu "Userspace interface"
config CRYPTO_USER_API
tristate
config CRYPTO_USER_API_HASH
tristate "Hash algorithms"
depends on NET
select CRYPTO_HASH
select CRYPTO_USER_API
help
Enable the userspace interface for hash algorithms.
See Documentation/crypto/userspace-if.rst and
https://www.chronox.de/libkcapi/html/index.html
config CRYPTO_USER_API_SKCIPHER
tristate "Symmetric key cipher algorithms"
depends on NET
select CRYPTO_SKCIPHER
select CRYPTO_USER_API
help
Enable the userspace interface for symmetric key cipher algorithms.
See Documentation/crypto/userspace-if.rst and
https://www.chronox.de/libkcapi/html/index.html
config CRYPTO_USER_API_RNG
tristate "RNG (random number generator) algorithms"
depends on NET
select CRYPTO_RNG
select CRYPTO_USER_API
help
Enable the userspace interface for RNG (random number generator)
algorithms.
See Documentation/crypto/userspace-if.rst and
https://www.chronox.de/libkcapi/html/index.html
config CRYPTO_USER_API_RNG_CAVP
bool "Enable CAVP testing of DRBG"
depends on CRYPTO_USER_API_RNG && CRYPTO_DRBG
help
Enable extra APIs in the userspace interface for NIST CAVP
(Cryptographic Algorithm Validation Program) testing:
- resetting DRBG entropy
- providing Additional Data
This should only be enabled for CAVP testing. You should say
no unless you know what this is.
config CRYPTO_USER_API_AEAD
tristate "AEAD cipher algorithms"
depends on NET
select CRYPTO_AEAD
select CRYPTO_SKCIPHER
select CRYPTO_NULL
select CRYPTO_USER_API
help
Enable the userspace interface for AEAD cipher algorithms.
See Documentation/crypto/userspace-if.rst and
https://www.chronox.de/libkcapi/html/index.html
config CRYPTO_USER_API_ENABLE_OBSOLETE
bool "Obsolete cryptographic algorithms"
depends on CRYPTO_USER_API
default y
help
Allow obsolete cryptographic algorithms to be selected that have
already been phased out from internal use by the kernel, and are
only useful for userspace clients that still rely on them.
config CRYPTO_STATS
bool "Crypto usage statistics"
depends on CRYPTO_USER
help
Enable the gathering of crypto stats.
This collects data sizes, numbers of requests, and numbers
of errors processed by:
- AEAD ciphers (encrypt, decrypt)
- asymmetric key ciphers (encrypt, decrypt, verify, sign)
- symmetric key ciphers (encrypt, decrypt)
- compression algorithms (compress, decompress)
- hash algorithms (hash)
- key-agreement protocol primitives (setsecret, generate
public key, compute shared secret)
- RNG (generate, seed)
endmenu
config CRYPTO_HASH_INFO
bool
if !KMSAN # avoid false positives from assembly
if ARM
source "arch/arm/crypto/Kconfig"
endif
if ARM64
source "arch/arm64/crypto/Kconfig"
endif
if MIPS
source "arch/mips/crypto/Kconfig"
endif
if PPC
source "arch/powerpc/crypto/Kconfig"
endif
if S390
source "arch/s390/crypto/Kconfig"
endif
if SPARC
source "arch/sparc/crypto/Kconfig"
endif
if X86
source "arch/x86/crypto/Kconfig"
endif
endif
source "drivers/crypto/Kconfig"
source "crypto/asymmetric_keys/Kconfig"
source "certs/Kconfig"
endif # if CRYPTO