https://github.com/torvalds/linux
Tip revision: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 authored by Linus Torvalds on 12 May 2024, 21:12:29 UTC
Linux 6.9
Linux 6.9
Tip revision: a38297e
Kconfig
# SPDX-License-Identifier: GPL-2.0
config BCMA_POSSIBLE
bool
depends on HAS_IOMEM && HAS_DMA
default y
menuconfig BCMA
tristate "Broadcom specific AMBA"
depends on BCMA_POSSIBLE
help
Bus driver for Broadcom specific Advanced Microcontroller Bus
Architecture.
if BCMA
# Support for Block-I/O. SELECT this from the driver that needs it.
config BCMA_BLOCKIO
bool
config BCMA_HOST_PCI_POSSIBLE
bool
depends on PCI = y
default y
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
depends on BCMA_HOST_PCI_POSSIBLE
select BCMA_DRIVER_PCI
default y
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on HAS_IOMEM
help
Host interface for a Broadcom AIX bus directly mapped into
the memory. This only works with the Broadcom SoCs from the
BCM47XX line.
If unsure, say N
config BCMA_DRIVER_PCI
bool "BCMA Broadcom PCI core driver"
depends on PCI
default y
help
BCMA bus may have many versions of PCIe core. This driver
supports:
1) PCIe core working in clientmode
2) PCIe Gen 2 clientmode core
In general PCIe (Gen 2) clientmode core is required on PCIe
hosted buses. It's responsible for initialization and basic
hardware management.
This driver is also prerequisite for a hostmode PCIe core
support.
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y
help
PCI core hostmode operation (external PCI bus).
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
depends on MIPS || COMPILE_TEST
help
Driver for the Broadcom MIPS core attached to Broadcom specific
Advanced Microcontroller Bus.
If unsure, say N
config BCMA_PFLASH
bool
depends on BCMA_DRIVER_MIPS
default y
config BCMA_SFLASH
bool "ChipCommon-attached serial flash support"
depends on BCMA_HOST_SOC
default y
help
Some cheap devices have serial flash connected to the ChipCommon
instead of independent SPI controller. It requires using a separated
driver that implements ChipCommon specific interface communication.
Enabling this symbol will let bcma recognize serial flash and register
it as platform device.
config BCMA_NFLASH
bool
depends on BCMA_DRIVER_MIPS
default y
config BCMA_DRIVER_GMAC_CMN
bool "BCMA Broadcom GBIT MAC COMMON core driver"
help
Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
specific Advanced Microcontroller Bus.
If unsure, say N
config BCMA_DRIVER_GPIO
bool "BCMA GPIO driver"
depends on GPIOLIB
select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
help
Driver to provide access to the GPIO pins of the bcma bus.
If unsure, say N
config BCMA_DEBUG
bool "BCMA debugging"
help
This turns on additional debugging messages.
If unsure, say N
endif # BCMA