https://github.com/torvalds/linux
Tip revision: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f authored by Linus Torvalds on 22 May 2022, 19:52:31 UTC
Linux 5.18
Linux 5.18
Tip revision: 4b0986a
Kconfig
# SPDX-License-Identifier: GPL-2.0
#
# PARIDE configuration
#
# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
# PARIDE must also be a module.
# PARIDE only supports PC style parports. Tough for USB or other parports...
comment "Parallel IDE high-level drivers"
depends on PARIDE
config PARIDE_PD
tristate "Parallel port IDE disks"
depends on PARIDE
help
This option enables the high-level driver for IDE-type disk devices
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port IDE driver, otherwise you should answer M to build
it as a loadable module. The module will be called pd. You
must also have at least one parallel port protocol driver in your
system. Among the devices supported by this driver are the SyQuest
EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
hard drives from MicroSolutions.
config PARIDE_PCD
tristate "Parallel port ATAPI CD-ROMs"
depends on PARIDE
select CDROM
help
This option enables the high-level driver for ATAPI CD-ROM devices
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port ATAPI CD-ROM driver, otherwise you should answer M to
build it as a loadable module. The module will be called pcd. You
must also have at least one parallel port protocol driver in your
system. Among the devices supported by this driver are the
MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
you have such a CD-ROM drive, you should also say Y or M to "ISO
9660 CD-ROM file system support" below, because that's the file
system used on CD-ROMs.
config PARIDE_PF
tristate "Parallel port ATAPI disks"
depends on PARIDE
help
This option enables the high-level driver for ATAPI disk devices
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port ATAPI disk driver, otherwise you should answer M
to build it as a loadable module. The module will be called pf.
You must also have at least one parallel port protocol driver in
your system. Among the devices supported by this driver are the
MicroSolutions backpack PD/CD drive and the Imation Superdisk
LS-120 drive.
config PARIDE_PT
tristate "Parallel port ATAPI tapes"
depends on PARIDE
help
This option enables the high-level driver for ATAPI tape devices
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port ATAPI disk driver, otherwise you should answer M
to build it as a loadable module. The module will be called pt.
You must also have at least one parallel port protocol driver in
your system. Among the devices supported by this driver is the
parallel port version of the HP 5GB drive.
config PARIDE_PG
tristate "Parallel port generic ATAPI devices"
depends on PARIDE
help
This option enables a special high-level driver for generic ATAPI
devices connected through a parallel port. The driver allows user
programs, such as cdrtools, to send ATAPI commands directly to a
device.
If you chose to build PARIDE support into your kernel, you may
answer Y here to build in the parallel port generic ATAPI driver,
otherwise you should answer M to build it as a loadable module. The
module will be called pg.
You must also have at least one parallel port protocol driver in
your system.
This driver implements an API loosely related to the generic SCSI
driver. See <file:include/linux/pg.h>. for details.
You can obtain the most recent version of cdrtools from
<ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
later fully support this driver.
comment "Parallel IDE protocol modules"
depends on PARIDE
config PARIDE_ATEN
tristate "ATEN EH-100 protocol"
depends on PARIDE
help
This option enables support for the ATEN EH-100 parallel port IDE
protocol. This protocol is used in some inexpensive low performance
parallel port kits made in Hong Kong. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called aten. You must also
have a high-level driver for the type of device that you want to
support.
config PARIDE_BPCK
tristate "MicroSolutions backpack (Series 5) protocol"
depends on PARIDE
help
This option enables support for the Micro Solutions BACKPACK
parallel port Series 5 IDE protocol. (Most BACKPACK drives made
before 1999 were Series 5) Series 5 drives will NOT always have the
Series noted on the bottom of the drive. Series 6 drivers will.
In other words, if your BACKPACK drive doesn't say "Series 6" on the
bottom, enable this option.
If you chose to build PARIDE support into your kernel, you may
answer Y here to build in the protocol driver, otherwise you should
answer M to build it as a loadable module. The module will be
called bpck. You must also have a high-level driver for the type
of device that you want to support.
config PARIDE_BPCK6
tristate "MicroSolutions backpack (Series 6) protocol"
depends on PARIDE && !64BIT
help
This option enables support for the Micro Solutions BACKPACK
parallel port Series 6 IDE protocol. (Most BACKPACK drives made
after 1999 were Series 6) Series 6 drives will have the Series noted
on the bottom of the drive. Series 5 drivers don't always have it
noted.
In other words, if your BACKPACK drive says "Series 6" on the
bottom, enable this option.
If you chose to build PARIDE support into your kernel, you may
answer Y here to build in the protocol driver, otherwise you should
answer M to build it as a loadable module. The module will be
called bpck6. You must also have a high-level driver for the type
of device that you want to support.
config PARIDE_COMM
tristate "DataStor Commuter protocol"
depends on PARIDE
help
This option enables support for the Commuter parallel port IDE
protocol from DataStor. If you chose to build PARIDE support
into your kernel, you may answer Y here to build in the protocol
driver, otherwise you should answer M to build it as a loadable
module. The module will be called comm. You must also have
a high-level driver for the type of device that you want to support.
config PARIDE_DSTR
tristate "DataStor EP-2000 protocol"
depends on PARIDE
help
This option enables support for the EP-2000 parallel port IDE
protocol from DataStor. If you chose to build PARIDE support
into your kernel, you may answer Y here to build in the protocol
driver, otherwise you should answer M to build it as a loadable
module. The module will be called dstr. You must also have
a high-level driver for the type of device that you want to support.
config PARIDE_FIT2
tristate "FIT TD-2000 protocol"
depends on PARIDE
help
This option enables support for the TD-2000 parallel port IDE
protocol from Fidelity International Technology. This is a simple
(low speed) adapter that is used in some portable hard drives. If
you chose to build PARIDE support into your kernel, you may answer Y
here to build in the protocol driver, otherwise you should answer M
to build it as a loadable module. The module will be called ktti.
You must also have a high-level driver for the type of device that
you want to support.
config PARIDE_FIT3
tristate "FIT TD-3000 protocol"
depends on PARIDE
help
This option enables support for the TD-3000 parallel port IDE
protocol from Fidelity International Technology. This protocol is
used in newer models of their portable disk, CD-ROM and PD/CD
devices. If you chose to build PARIDE support into your kernel, you
may answer Y here to build in the protocol driver, otherwise you
should answer M to build it as a loadable module. The module will be
called fit3. You must also have a high-level driver for the type
of device that you want to support.
config PARIDE_EPAT
tristate "Shuttle EPAT/EPEZ protocol"
depends on PARIDE
help
This option enables support for the EPAT parallel port IDE protocol.
EPAT is a parallel port IDE adapter manufactured by Shuttle
Technology and widely used in devices from major vendors such as
Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
PARIDE support into your kernel, you may answer Y here to build in
the protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called epat. You must also
have a high-level driver for the type of device that you want to
support.
config PARIDE_EPATC8
bool "Support c7/c8 chips"
depends on PARIDE_EPAT
help
This option enables support for the newer Shuttle EP1284 (aka c7 and
c8) chip. You need this if you are using any recent Imation SuperDisk
(LS-120) drive.
config PARIDE_EPIA
tristate "Shuttle EPIA protocol"
depends on PARIDE
help
This option enables support for the (obsolete) EPIA parallel port
IDE protocol from Shuttle Technology. This adapter can still be
found in some no-name kits. If you chose to build PARIDE support
into your kernel, you may answer Y here to build in the protocol
driver, otherwise you should answer M to build it as a loadable
module. The module will be called epia. You must also have a
high-level driver for the type of device that you want to support.
config PARIDE_FRIQ
tristate "Freecom IQ ASIC-2 protocol"
depends on PARIDE
help
This option enables support for version 2 of the Freecom IQ parallel
port IDE adapter. This adapter is used by the Maxell Superdisk
drive. If you chose to build PARIDE support into your kernel, you
may answer Y here to build in the protocol driver, otherwise you
should answer M to build it as a loadable module. The module will be
called friq. You must also have a high-level driver for the type
of device that you want to support.
config PARIDE_FRPW
tristate "FreeCom power protocol"
depends on PARIDE
help
This option enables support for the Freecom power parallel port IDE
protocol. If you chose to build PARIDE support into your kernel, you
may answer Y here to build in the protocol driver, otherwise you
should answer M to build it as a loadable module. The module will be
called frpw. You must also have a high-level driver for the type
of device that you want to support.
config PARIDE_KBIC
tristate "KingByte KBIC-951A/971A protocols"
depends on PARIDE
help
This option enables support for the KBIC-951A and KBIC-971A parallel
port IDE protocols from KingByte Information Corp. KingByte's
adapters appear in many no-name portable disk and CD-ROM products,
especially in Europe. If you chose to build PARIDE support into your
kernel, you may answer Y here to build in the protocol driver,
otherwise you should answer M to build it as a loadable module. The
module will be called kbic. You must also have a high-level driver
for the type of device that you want to support.
config PARIDE_KTTI
tristate "KT PHd protocol"
depends on PARIDE
help
This option enables support for the "PHd" parallel port IDE protocol
from KT Technology. This is a simple (low speed) adapter that is
used in some 2.5" portable hard drives. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called ktti. You must also
have a high-level driver for the type of device that you want to
support.
config PARIDE_ON20
tristate "OnSpec 90c20 protocol"
depends on PARIDE
help
This option enables support for the (obsolete) 90c20 parallel port
IDE protocol from OnSpec (often marketed under the ValuStore brand
name). If you chose to build PARIDE support into your kernel, you
may answer Y here to build in the protocol driver, otherwise you
should answer M to build it as a loadable module. The module will
be called on20. You must also have a high-level driver for the
type of device that you want to support.
config PARIDE_ON26
tristate "OnSpec 90c26 protocol"
depends on PARIDE
help
This option enables support for the 90c26 parallel port IDE protocol
from OnSpec Electronics (often marketed under the ValuStore brand
name). If you chose to build PARIDE support into your kernel, you
may answer Y here to build in the protocol driver, otherwise you
should answer M to build it as a loadable module. The module will be
called on26. You must also have a high-level driver for the type
of device that you want to support.
#