https://github.com/torvalds/linux
Tip revision: 7928b2cbe55b2a410a0f5c1f154610059c57b1b2 authored by Linus Torvalds on 11 February 2018, 23:04:29 UTC
Linux 4.16-rc1
Linux 4.16-rc1
Tip revision: 7928b2c
omap-ocp2scp.c
/*
* omap-ocp2scp.c - transform ocp interface protocol to scp protocol
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#define OCP2SCP_TIMING 0x18
#define SYNC2_MASK 0xf
static int ocp2scp_remove_devices(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
platform_device_unregister(pdev);
return 0;
}
static int omap_ocp2scp_probe(struct platform_device *pdev)
{
int ret;
u32 reg;
void __iomem *regs;
struct resource *res;
struct device_node *np = pdev->dev.of_node;
if (np) {
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret) {
dev_err(&pdev->dev,
"failed to add resources for ocp2scp child\n");
goto err0;
}
}
pm_runtime_enable(&pdev->dev);
/*
* As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
* under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution;
* As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf
* under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution;
* As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf
* under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution;
* As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249
* under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution;
*
* Read path of OCP2SCP is not working properly due to low reset value
* of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more.
*/
if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(regs)) {
ret = PTR_ERR(regs);
goto err1;
}
pm_runtime_get_sync(&pdev->dev);
reg = readl_relaxed(regs + OCP2SCP_TIMING);
reg &= ~(SYNC2_MASK);
reg |= 0x6;
writel_relaxed(reg, regs + OCP2SCP_TIMING);
pm_runtime_put_sync(&pdev->dev);
}
return 0;
err1:
pm_runtime_disable(&pdev->dev);
err0:
device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
return ret;
}
static int omap_ocp2scp_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id omap_ocp2scp_id_table[] = {
{ .compatible = "ti,omap-ocp2scp" },
{ .compatible = "ti,am437x-ocp2scp" },
{}
};
MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
#endif
static struct platform_driver omap_ocp2scp_driver = {
.probe = omap_ocp2scp_probe,
.remove = omap_ocp2scp_remove,
.driver = {
.name = "omap-ocp2scp",
.of_match_table = of_match_ptr(omap_ocp2scp_id_table),
},
};
module_platform_driver(omap_ocp2scp_driver);
MODULE_ALIAS("platform:omap-ocp2scp");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP OCP2SCP driver");
MODULE_LICENSE("GPL v2");