https://github.com/torvalds/linux
Tip revision: 2241ab53cbb5cdb08a6b2d4688feb13971058f65 authored by Linus Torvalds on 22 January 2023, 00:27:01 UTC
Linux 6.2-rc5
Linux 6.2-rc5
Tip revision: 2241ab5
meson8-ddr.c
// SPDX-License-Identifier: GPL-2.0+
/*
* Amlogic Meson8 DDR clock controller
*
* Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
#include <dt-bindings/clock/meson8-ddr-clkc.h>
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include "clk-regmap.h"
#include "clk-pll.h"
#define AM_DDR_PLL_CNTL 0x00
#define AM_DDR_PLL_CNTL1 0x04
#define AM_DDR_PLL_CNTL2 0x08
#define AM_DDR_PLL_CNTL3 0x0c
#define AM_DDR_PLL_CNTL4 0x10
#define AM_DDR_PLL_STS 0x14
#define DDR_CLK_CNTL 0x18
#define DDR_CLK_STS 0x1c
static struct clk_regmap meson8_ddr_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = AM_DDR_PLL_CNTL,
.shift = 30,
.width = 1,
},
.m = {
.reg_off = AM_DDR_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = AM_DDR_PLL_CNTL,
.shift = 9,
.width = 5,
},
.l = {
.reg_off = AM_DDR_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = AM_DDR_PLL_CNTL,
.shift = 29,
.width = 1,
},
},
.hw.init = &(struct clk_init_data){
.name = "ddr_pll_dco",
.ops = &meson_clk_pll_ro_ops,
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
.num_parents = 1,
},
};
static struct clk_regmap meson8_ddr_pll = {
.data = &(struct clk_regmap_div_data){
.offset = AM_DDR_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "ddr_pll",
.ops = &clk_regmap_divider_ro_ops,
.parent_hws = (const struct clk_hw *[]) {
&meson8_ddr_pll_dco.hw
},
.num_parents = 1,
},
};
static struct clk_hw_onecell_data meson8_ddr_clk_hw_onecell_data = {
.hws = {
[DDR_CLKID_DDR_PLL_DCO] = &meson8_ddr_pll_dco.hw,
[DDR_CLKID_DDR_PLL] = &meson8_ddr_pll.hw,
},
.num = 2,
};
static struct clk_regmap *const meson8_ddr_clk_regmaps[] = {
&meson8_ddr_pll_dco,
&meson8_ddr_pll,
};
static const struct regmap_config meson8_ddr_clkc_regmap_config = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = DDR_CLK_STS,
};
static int meson8_ddr_clkc_probe(struct platform_device *pdev)
{
struct regmap *regmap;
void __iomem *base;
struct clk_hw *hw;
int ret, i;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(&pdev->dev, base,
&meson8_ddr_clkc_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
/* Populate regmap */
for (i = 0; i < ARRAY_SIZE(meson8_ddr_clk_regmaps); i++)
meson8_ddr_clk_regmaps[i]->map = regmap;
/* Register all clks */
for (i = 0; i < meson8_ddr_clk_hw_onecell_data.num; i++) {
hw = meson8_ddr_clk_hw_onecell_data.hws[i];
ret = devm_clk_hw_register(&pdev->dev, hw);
if (ret) {
dev_err(&pdev->dev, "Clock registration failed\n");
return ret;
}
}
return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
&meson8_ddr_clk_hw_onecell_data);
}
static const struct of_device_id meson8_ddr_clkc_match_table[] = {
{ .compatible = "amlogic,meson8-ddr-clkc" },
{ .compatible = "amlogic,meson8b-ddr-clkc" },
{ /* sentinel */ }
};
static struct platform_driver meson8_ddr_clkc_driver = {
.probe = meson8_ddr_clkc_probe,
.driver = {
.name = "meson8-ddr-clkc",
.of_match_table = meson8_ddr_clkc_match_table,
},
};
builtin_platform_driver(meson8_ddr_clkc_driver);