https://github.com/torvalds/linux
Tip revision: fa8410b355251fd30341662a40ac6b22d3e38468 authored by Linus Torvalds on 21 August 2016, 23:14:10 UTC
Linux 4.8-rc3
Linux 4.8-rc3
Tip revision: fa8410b
zynq-fpga.c
/*
* Copyright (c) 2011-2015 Xilinx Inc.
* Copyright (c) 2015, National Instruments Corp.
*
* FPGA Manager Driver for Xilinx Zynq, heavily based on xdevcfg driver
* in their vendor tree.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fpga/fpga-mgr.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/string.h>
/* Offsets into SLCR regmap */
/* FPGA Software Reset Control */
#define SLCR_FPGA_RST_CTRL_OFFSET 0x240
/* Level Shifters Enable */
#define SLCR_LVL_SHFTR_EN_OFFSET 0x900
/* Constant Definitions */
/* Control Register */
#define CTRL_OFFSET 0x00
/* Lock Register */
#define LOCK_OFFSET 0x04
/* Interrupt Status Register */
#define INT_STS_OFFSET 0x0c
/* Interrupt Mask Register */
#define INT_MASK_OFFSET 0x10
/* Status Register */
#define STATUS_OFFSET 0x14
/* DMA Source Address Register */
#define DMA_SRC_ADDR_OFFSET 0x18
/* DMA Destination Address Reg */
#define DMA_DST_ADDR_OFFSET 0x1c
/* DMA Source Transfer Length */
#define DMA_SRC_LEN_OFFSET 0x20
/* DMA Destination Transfer */
#define DMA_DEST_LEN_OFFSET 0x24
/* Unlock Register */
#define UNLOCK_OFFSET 0x34
/* Misc. Control Register */
#define MCTRL_OFFSET 0x80
/* Control Register Bit definitions */
/* Signal to reset FPGA */
#define CTRL_PCFG_PROG_B_MASK BIT(30)
/* Enable PCAP for PR */
#define CTRL_PCAP_PR_MASK BIT(27)
/* Enable PCAP */
#define CTRL_PCAP_MODE_MASK BIT(26)
/* Miscellaneous Control Register bit definitions */
/* Internal PCAP loopback */
#define MCTRL_PCAP_LPBK_MASK BIT(4)
/* Status register bit definitions */
/* FPGA init status */
#define STATUS_DMA_Q_F BIT(31)
#define STATUS_PCFG_INIT_MASK BIT(4)
/* Interrupt Status/Mask Register Bit definitions */
/* DMA command done */
#define IXR_DMA_DONE_MASK BIT(13)
/* DMA and PCAP cmd done */
#define IXR_D_P_DONE_MASK BIT(12)
/* FPGA programmed */
#define IXR_PCFG_DONE_MASK BIT(2)
#define IXR_ERROR_FLAGS_MASK 0x00F0F860
#define IXR_ALL_MASK 0xF8F7F87F
/* Miscellaneous constant values */
/* Invalid DMA addr */
#define DMA_INVALID_ADDRESS GENMASK(31, 0)
/* Used to unlock the dev */
#define UNLOCK_MASK 0x757bdf0d
/* Timeout for DMA to complete */
#define DMA_DONE_TIMEOUT msecs_to_jiffies(1000)
/* Timeout for polling reset bits */
#define INIT_POLL_TIMEOUT 2500000
/* Delay for polling reset bits */
#define INIT_POLL_DELAY 20
/* Masks for controlling stuff in SLCR */
/* Disable all Level shifters */
#define LVL_SHFTR_DISABLE_ALL_MASK 0x0
/* Enable Level shifters from PS to PL */
#define LVL_SHFTR_ENABLE_PS_TO_PL 0xa
/* Enable Level shifters from PL to PS */
#define LVL_SHFTR_ENABLE_PL_TO_PS 0xf
/* Enable global resets */
#define FPGA_RST_ALL_MASK 0xf
/* Disable global resets */
#define FPGA_RST_NONE_MASK 0x0
struct zynq_fpga_priv {
struct device *dev;
int irq;
struct clk *clk;
void __iomem *io_base;
struct regmap *slcr;
struct completion dma_done;
};
static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
u32 val)
{
writel(val, priv->io_base + offset);
}
static inline u32 zynq_fpga_read(const struct zynq_fpga_priv *priv,
u32 offset)
{
return readl(priv->io_base + offset);
}
#define zynq_fpga_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
readl_poll_timeout(priv->io_base + addr, val, cond, sleep_us, \
timeout_us)
static void zynq_fpga_mask_irqs(struct zynq_fpga_priv *priv)
{
u32 intr_mask;
intr_mask = zynq_fpga_read(priv, INT_MASK_OFFSET);
zynq_fpga_write(priv, INT_MASK_OFFSET,
intr_mask | IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK);
}
static void zynq_fpga_unmask_irqs(struct zynq_fpga_priv *priv)
{
u32 intr_mask;
intr_mask = zynq_fpga_read(priv, INT_MASK_OFFSET);
zynq_fpga_write(priv, INT_MASK_OFFSET,
intr_mask
& ~(IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK));
}
static irqreturn_t zynq_fpga_isr(int irq, void *data)
{
struct zynq_fpga_priv *priv = data;
/* disable DMA and error IRQs */
zynq_fpga_mask_irqs(priv);
complete(&priv->dma_done);
return IRQ_HANDLED;
}
static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
const char *buf, size_t count)
{
struct zynq_fpga_priv *priv;
u32 ctrl, status;
int err;
priv = mgr->priv;
err = clk_enable(priv->clk);
if (err)
return err;
/* don't globally reset PL if we're doing partial reconfig */
if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* assert AXI interface resets */
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
FPGA_RST_ALL_MASK);
/* disable all level shifters */
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
LVL_SHFTR_DISABLE_ALL_MASK);
/* enable level shifters from PS to PL */
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
LVL_SHFTR_ENABLE_PS_TO_PL);
/* create a rising edge on PCFG_INIT. PCFG_INIT follows
* PCFG_PROG_B, so we need to poll it after setting PCFG_PROG_B
* to make sure the rising edge actually happens.
* Note: PCFG_PROG_B is low active, sequence as described in
* UG585 v1.10 page 211
*/
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
ctrl |= CTRL_PCFG_PROG_B_MASK;
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
status & STATUS_PCFG_INIT_MASK,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
goto out_err;
}
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
ctrl &= ~CTRL_PCFG_PROG_B_MASK;
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
!(status & STATUS_PCFG_INIT_MASK),
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
dev_err(priv->dev, "Timeout waiting for !PCFG_INIT");
goto out_err;
}
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
ctrl |= CTRL_PCFG_PROG_B_MASK;
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
status & STATUS_PCFG_INIT_MASK,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
goto out_err;
}
}
/* set configuration register with following options:
* - enable PCAP interface
* - set throughput for maximum speed
* - set CPU in user mode
*/
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
zynq_fpga_write(priv, CTRL_OFFSET,
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl));
/* check that we have room in the command queue */
status = zynq_fpga_read(priv, STATUS_OFFSET);
if (status & STATUS_DMA_Q_F) {
dev_err(priv->dev, "DMA command queue full");
err = -EBUSY;
goto out_err;
}
/* ensure internal PCAP loopback is disabled */
ctrl = zynq_fpga_read(priv, MCTRL_OFFSET);
zynq_fpga_write(priv, MCTRL_OFFSET, (~MCTRL_PCAP_LPBK_MASK & ctrl));
clk_disable(priv->clk);
return 0;
out_err:
clk_disable(priv->clk);
return err;
}
static int zynq_fpga_ops_write(struct fpga_manager *mgr,
const char *buf, size_t count)
{
struct zynq_fpga_priv *priv;
int err;
char *kbuf;
size_t in_count;
dma_addr_t dma_addr;
u32 transfer_length;
u32 intr_status;
in_count = count;
priv = mgr->priv;
kbuf = dma_alloc_coherent(priv->dev, count, &dma_addr, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
memcpy(kbuf, buf, count);
/* enable clock */
err = clk_enable(priv->clk);
if (err)
goto out_free;
zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
reinit_completion(&priv->dma_done);
/* enable DMA and error IRQs */
zynq_fpga_unmask_irqs(priv);
/* the +1 in the src addr is used to hold off on DMA_DONE IRQ
* until both AXI and PCAP are done ...
*/
zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, (u32)(dma_addr) + 1);
zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, (u32)DMA_INVALID_ADDRESS);
/* convert #bytes to #words */
transfer_length = (count + 3) / 4;
zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, transfer_length);
zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0);
wait_for_completion(&priv->dma_done);
intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
if (!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
dev_err(priv->dev, "Error configuring FPGA");
err = -EFAULT;
}
clk_disable(priv->clk);
out_free:
dma_free_coherent(priv->dev, in_count, kbuf, dma_addr);
return err;
}
static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
{
struct zynq_fpga_priv *priv = mgr->priv;
int err;
u32 intr_status;
err = clk_enable(priv->clk);
if (err)
return err;
err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
intr_status & IXR_PCFG_DONE_MASK,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
clk_disable(priv->clk);
if (err)
return err;
/* for the partial reconfig case we didn't touch the level shifters */
if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* enable level shifters from PL to PS */
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
LVL_SHFTR_ENABLE_PL_TO_PS);
/* deassert AXI interface resets */
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
FPGA_RST_NONE_MASK);
}
return 0;
}
static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
{
int err;
u32 intr_status;
struct zynq_fpga_priv *priv;
priv = mgr->priv;
err = clk_enable(priv->clk);
if (err)
return FPGA_MGR_STATE_UNKNOWN;
intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
clk_disable(priv->clk);
if (intr_status & IXR_PCFG_DONE_MASK)
return FPGA_MGR_STATE_OPERATING;
return FPGA_MGR_STATE_UNKNOWN;
}
static const struct fpga_manager_ops zynq_fpga_ops = {
.state = zynq_fpga_ops_state,
.write_init = zynq_fpga_ops_write_init,
.write = zynq_fpga_ops_write,
.write_complete = zynq_fpga_ops_write_complete,
};
static int zynq_fpga_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct zynq_fpga_priv *priv;
struct resource *res;
int err;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io_base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->io_base))
return PTR_ERR(priv->io_base);
priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
"syscon");
if (IS_ERR(priv->slcr)) {
dev_err(dev, "unable to get zynq-slcr regmap");
return PTR_ERR(priv->slcr);
}
init_completion(&priv->dma_done);
priv->irq = platform_get_irq(pdev, 0);
if (priv->irq < 0) {
dev_err(dev, "No IRQ available");
return priv->irq;
}
err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0,
dev_name(dev), priv);
if (err) {
dev_err(dev, "unable to request IRQ");
return err;
}
priv->clk = devm_clk_get(dev, "ref_clk");
if (IS_ERR(priv->clk)) {
dev_err(dev, "input clock not found");
return PTR_ERR(priv->clk);
}
err = clk_prepare_enable(priv->clk);
if (err) {
dev_err(dev, "unable to enable clock");
return err;
}
/* unlock the device */
zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
clk_disable(priv->clk);
err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
&zynq_fpga_ops, priv);
if (err) {
dev_err(dev, "unable to register FPGA manager");
clk_unprepare(priv->clk);
return err;
}
return 0;
}
static int zynq_fpga_remove(struct platform_device *pdev)
{
struct zynq_fpga_priv *priv;
struct fpga_manager *mgr;
mgr = platform_get_drvdata(pdev);
priv = mgr->priv;
fpga_mgr_unregister(&pdev->dev);
clk_unprepare(priv->clk);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id zynq_fpga_of_match[] = {
{ .compatible = "xlnx,zynq-devcfg-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, zynq_fpga_of_match);
#endif
static struct platform_driver zynq_fpga_driver = {
.probe = zynq_fpga_probe,
.remove = zynq_fpga_remove,
.driver = {
.name = "zynq_fpga_manager",
.of_match_table = of_match_ptr(zynq_fpga_of_match),
},
};
module_platform_driver(zynq_fpga_driver);
MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
MODULE_DESCRIPTION("Xilinx Zynq FPGA Manager");
MODULE_LICENSE("GPL v2");