https://github.com/torvalds/linux
Tip revision: 3906fe9bb7f1a2c8667ae54e967dc8690824f4ea authored by Linus Torvalds on 25 October 2021, 18:30:31 UTC
Linux 5.15-rc7
Linux 5.15-rc7
Tip revision: 3906fe9
gpio-syscon.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* SYSCON GPIO driver
*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*/
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#define GPIO_SYSCON_FEAT_IN BIT(0)
#define GPIO_SYSCON_FEAT_OUT BIT(1)
#define GPIO_SYSCON_FEAT_DIR BIT(2)
/* SYSCON driver is designed to use 32-bit wide registers */
#define SYSCON_REG_SIZE (4)
#define SYSCON_REG_BITS (SYSCON_REG_SIZE * 8)
/**
* struct syscon_gpio_data - Configuration for the device.
* @compatible: SYSCON driver compatible string.
* @flags: Set of GPIO_SYSCON_FEAT_ flags:
* GPIO_SYSCON_FEAT_IN: GPIOs supports input,
* GPIO_SYSCON_FEAT_OUT: GPIOs supports output,
* GPIO_SYSCON_FEAT_DIR: GPIOs supports switch direction.
* @bit_count: Number of bits used as GPIOs.
* @dat_bit_offset: Offset (in bits) to the first GPIO bit.
* @dir_bit_offset: Optional offset (in bits) to the first bit to switch
* GPIO direction (Used with GPIO_SYSCON_FEAT_DIR flag).
* @set: HW specific callback to assigns output value
* for signal "offset"
*/
struct syscon_gpio_data {
const char *compatible;
unsigned int flags;
unsigned int bit_count;
unsigned int dat_bit_offset;
unsigned int dir_bit_offset;
void (*set)(struct gpio_chip *chip,
unsigned offset, int value);
};
struct syscon_gpio_priv {
struct gpio_chip chip;
struct regmap *syscon;
const struct syscon_gpio_data *data;
u32 dreg_offset;
u32 dir_reg_offset;
};
static int syscon_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
unsigned int val, offs;
int ret;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
ret = regmap_read(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, &val);
if (ret)
return ret;
return !!(val & BIT(offs % SYSCON_REG_BITS));
}
static void syscon_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
unsigned int offs;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
BIT(offs % SYSCON_REG_BITS),
val ? BIT(offs % SYSCON_REG_BITS) : 0);
}
static int syscon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
unsigned int offs;
offs = priv->dir_reg_offset +
priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
BIT(offs % SYSCON_REG_BITS), 0);
}
return 0;
}
static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
if (priv->data->flags & GPIO_SYSCON_FEAT_DIR) {
unsigned int offs;
offs = priv->dir_reg_offset +
priv->data->dir_bit_offset + offset;
regmap_update_bits(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
BIT(offs % SYSCON_REG_BITS),
BIT(offs % SYSCON_REG_BITS));
}
chip->set(chip, offset, val);
return 0;
}
static const struct syscon_gpio_data clps711x_mctrl_gpio = {
/* ARM CLPS711X SYSFLG1 Bits 8-10 */
.compatible = "cirrus,ep7209-syscon1",
.flags = GPIO_SYSCON_FEAT_IN,
.bit_count = 3,
.dat_bit_offset = 0x40 * 8 + 8,
};
static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset,
int val)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
unsigned int offs;
u8 bit;
u32 data;
int ret;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
bit = offs % SYSCON_REG_BITS;
data = (val ? BIT(bit) : 0) | BIT(bit + 16);
ret = regmap_write(priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
data);
if (ret < 0)
dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
}
static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = {
/* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */
.flags = GPIO_SYSCON_FEAT_OUT,
.bit_count = 1,
.dat_bit_offset = 0x0428 * 8 + 1,
.set = rockchip_gpio_set,
};
#define KEYSTONE_LOCK_BIT BIT(0)
static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct syscon_gpio_priv *priv = gpiochip_get_data(chip);
unsigned int offs;
int ret;
offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
if (!val)
return;
ret = regmap_update_bits(
priv->syscon,
(offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT,
BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT);
if (ret < 0)
dev_err(chip->parent, "gpio write failed ret(%d)\n", ret);
}
static const struct syscon_gpio_data keystone_dsp_gpio = {
/* ARM Keystone 2 */
.compatible = NULL,
.flags = GPIO_SYSCON_FEAT_OUT,
.bit_count = 28,
.dat_bit_offset = 4,
.set = keystone_gpio_set,
};
static const struct of_device_id syscon_gpio_ids[] = {
{
.compatible = "cirrus,ep7209-mctrl-gpio",
.data = &clps711x_mctrl_gpio,
},
{
.compatible = "ti,keystone-dsp-gpio",
.data = &keystone_dsp_gpio,
},
{
.compatible = "rockchip,rk3328-grf-gpio",
.data = &rockchip_rk3328_gpio_mute,
},
{ }
};
MODULE_DEVICE_TABLE(of, syscon_gpio_ids);
static int syscon_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct syscon_gpio_priv *priv;
struct device_node *np = dev->of_node;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->data = of_device_get_match_data(dev);
if (priv->data->compatible) {
priv->syscon = syscon_regmap_lookup_by_compatible(
priv->data->compatible);
if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon);
} else {
priv->syscon =
syscon_regmap_lookup_by_phandle(np, "gpio,syscon-dev");
if (IS_ERR(priv->syscon) && np->parent)
priv->syscon = syscon_node_to_regmap(np->parent);
if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon);
ret = of_property_read_u32_index(np, "gpio,syscon-dev", 1,
&priv->dreg_offset);
if (ret)
dev_err(dev, "can't read the data register offset!\n");
priv->dreg_offset <<= 3;
ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
&priv->dir_reg_offset);
if (ret)
dev_dbg(dev, "can't read the dir register offset!\n");
priv->dir_reg_offset <<= 3;
}
priv->chip.parent = dev;
priv->chip.owner = THIS_MODULE;
priv->chip.label = dev_name(dev);
priv->chip.base = -1;
priv->chip.ngpio = priv->data->bit_count;
priv->chip.get = syscon_gpio_get;
if (priv->data->flags & GPIO_SYSCON_FEAT_IN)
priv->chip.direction_input = syscon_gpio_dir_in;
if (priv->data->flags & GPIO_SYSCON_FEAT_OUT) {
priv->chip.set = priv->data->set ? : syscon_gpio_set;
priv->chip.direction_output = syscon_gpio_dir_out;
}
platform_set_drvdata(pdev, priv);
return devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
}
static struct platform_driver syscon_gpio_driver = {
.driver = {
.name = "gpio-syscon",
.of_match_table = syscon_gpio_ids,
},
.probe = syscon_gpio_probe,
};
module_platform_driver(syscon_gpio_driver);
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
MODULE_DESCRIPTION("SYSCON GPIO driver");
MODULE_LICENSE("GPL");