https://github.com/torvalds/linux
Tip revision: 29594404d7fe73cd80eaa4ee8c43dcc53970c60e authored by Linus Torvalds on 11 December 2012, 03:30:57 UTC
Linux 3.7
Linux 3.7
Tip revision: 2959440
i2c-mxs.c
/*
* Freescale MXS I2C bus driver
*
* Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_i2c.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/fsl/mxs-dma.h>
#define DRIVER_NAME "mxs-i2c"
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
#define MXS_I2C_CTRL0_SFTRST 0x80000000
#define MXS_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
#define MXS_I2C_CTRL0_RETAIN_CLOCK 0x00200000
#define MXS_I2C_CTRL0_POST_SEND_STOP 0x00100000
#define MXS_I2C_CTRL0_PRE_SEND_START 0x00080000
#define MXS_I2C_CTRL0_MASTER_MODE 0x00020000
#define MXS_I2C_CTRL0_DIRECTION 0x00010000
#define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF)
#define MXS_I2C_TIMING0 (0x10)
#define MXS_I2C_TIMING1 (0x20)
#define MXS_I2C_TIMING2 (0x30)
#define MXS_I2C_CTRL1 (0x40)
#define MXS_I2C_CTRL1_SET (0x44)
#define MXS_I2C_CTRL1_CLR (0x48)
#define MXS_I2C_CTRL1_BUS_FREE_IRQ 0x80
#define MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x40
#define MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x20
#define MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x10
#define MXS_I2C_CTRL1_EARLY_TERM_IRQ 0x08
#define MXS_I2C_CTRL1_MASTER_LOSS_IRQ 0x04
#define MXS_I2C_CTRL1_SLAVE_STOP_IRQ 0x02
#define MXS_I2C_CTRL1_SLAVE_IRQ 0x01
#define MXS_I2C_IRQ_MASK (MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | \
MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ | \
MXS_I2C_CTRL1_EARLY_TERM_IRQ | \
MXS_I2C_CTRL1_MASTER_LOSS_IRQ | \
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
MXS_I2C_CTRL0_MASTER_MODE | \
MXS_I2C_CTRL0_DIRECTION | \
MXS_I2C_CTRL0_XFER_COUNT(1))
#define MXS_CMD_I2C_WRITE (MXS_I2C_CTRL0_PRE_SEND_START | \
MXS_I2C_CTRL0_MASTER_MODE | \
MXS_I2C_CTRL0_DIRECTION)
#define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
MXS_I2C_CTRL0_MASTER_MODE)
struct mxs_i2c_speed_config {
uint32_t timing0;
uint32_t timing1;
uint32_t timing2;
};
/*
* Timing values for the default 24MHz clock supplied into the i2c block.
*
* The bus can operate at 95kHz or at 400kHz with the following timing
* register configurations. The 100kHz mode isn't present because it's
* values are not stated in the i.MX233/i.MX28 datasheet. The 95kHz mode
* shall be close enough replacement. Therefore when the bus is configured
* for 100kHz operation, 95kHz timing settings are actually loaded.
*
* For details, see i.MX233 [25.4.2 - 25.4.4] and i.MX28 [27.5.2 - 27.5.4].
*/
static const struct mxs_i2c_speed_config mxs_i2c_95kHz_config = {
.timing0 = 0x00780030,
.timing1 = 0x00800030,
.timing2 = 0x00300030,
};
static const struct mxs_i2c_speed_config mxs_i2c_400kHz_config = {
.timing0 = 0x000f0007,
.timing1 = 0x001f000f,
.timing2 = 0x00300030,
};
/**
* struct mxs_i2c_dev - per device, private MXS-I2C data
*
* @dev: driver model device node
* @regs: IO registers pointer
* @cmd_complete: completion object for transaction wait
* @cmd_err: error code for last transaction
* @adapter: i2c subsystem adapter node
*/
struct mxs_i2c_dev {
struct device *dev;
void __iomem *regs;
struct completion cmd_complete;
u32 cmd_err;
struct i2c_adapter adapter;
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
uint32_t pio_data[2];
uint32_t addr_data;
struct scatterlist sg_io[2];
bool dma_read;
};
static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
stmp_reset_block(i2c->regs);
writel(i2c->speed->timing0, i2c->regs + MXS_I2C_TIMING0);
writel(i2c->speed->timing1, i2c->regs + MXS_I2C_TIMING1);
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
{
if (i2c->dma_read) {
dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
} else {
dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
}
}
static void mxs_i2c_dma_irq_callback(void *param)
{
struct mxs_i2c_dev *i2c = param;
complete(&i2c->cmd_complete);
mxs_i2c_dma_finish(i2c);
}
static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
struct i2c_msg *msg, uint32_t flags)
{
struct dma_async_tx_descriptor *desc;
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
if (msg->flags & I2C_M_RD) {
i2c->dma_read = 1;
i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
/*
* SELECT command.
*/
/* Queue the PIO register write transfer. */
i2c->pio_data[0] = MXS_CMD_I2C_SELECT;
desc = dmaengine_prep_slave_sg(i2c->dmach,
(struct scatterlist *)&i2c->pio_data[0],
1, DMA_TRANS_NONE, 0);
if (!desc) {
dev_err(i2c->dev,
"Failed to get PIO reg. write descriptor.\n");
goto select_init_pio_fail;
}
/* Queue the DMA data transfer. */
sg_init_one(&i2c->sg_io[0], &i2c->addr_data, 1);
dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
goto select_init_dma_fail;
}
/*
* READ command.
*/
/* Queue the PIO register write transfer. */
i2c->pio_data[1] = flags | MXS_CMD_I2C_READ |
MXS_I2C_CTRL0_XFER_COUNT(msg->len);
desc = dmaengine_prep_slave_sg(i2c->dmach,
(struct scatterlist *)&i2c->pio_data[1],
1, DMA_TRANS_NONE, DMA_PREP_INTERRUPT);
if (!desc) {
dev_err(i2c->dev,
"Failed to get PIO reg. write descriptor.\n");
goto select_init_dma_fail;
}
/* Queue the DMA data transfer. */
sg_init_one(&i2c->sg_io[1], msg->buf, msg->len);
dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
goto read_init_dma_fail;
}
} else {
i2c->dma_read = 0;
i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
/*
* WRITE command.
*/
/* Queue the PIO register write transfer. */
i2c->pio_data[0] = flags | MXS_CMD_I2C_WRITE |
MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1);
desc = dmaengine_prep_slave_sg(i2c->dmach,
(struct scatterlist *)&i2c->pio_data[0],
1, DMA_TRANS_NONE, 0);
if (!desc) {
dev_err(i2c->dev,
"Failed to get PIO reg. write descriptor.\n");
goto write_init_pio_fail;
}
/* Queue the DMA data transfer. */
sg_init_table(i2c->sg_io, 2);
sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1);
sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len);
dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(i2c->dev,
"Failed to get DMA data write descriptor.\n");
goto write_init_dma_fail;
}
}
/*
* The last descriptor must have this callback,
* to finish the DMA transaction.
*/
desc->callback = mxs_i2c_dma_irq_callback;
desc->callback_param = i2c;
/* Start the transfer. */
dmaengine_submit(desc);
dma_async_issue_pending(i2c->dmach);
return 0;
/* Read failpath. */
read_init_dma_fail:
dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
select_init_dma_fail:
dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
select_init_pio_fail:
dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
/* Write failpath. */
write_init_dma_fail:
dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
write_init_pio_fail:
dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
}
/*
* Low level master read/write transaction.
*/
static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int stop)
{
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
int ret;
int flags;
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
if (msg->len == 0)
return -EINVAL;
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
if (ret)
return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
return i2c->cmd_err;
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
int num)
{
int i;
int err;
for (i = 0; i < num; i++) {
err = mxs_i2c_xfer_msg(adap, &msgs[i], i == (num - 1));
if (err)
return err;
}
return num;
}
static u32 mxs_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
}
static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
if (!stat)
return IRQ_NONE;
if (stat & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
i2c->cmd_err = -ENXIO;
else if (stat & (MXS_I2C_CTRL1_EARLY_TERM_IRQ |
MXS_I2C_CTRL1_MASTER_LOSS_IRQ |
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ))
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
}
static const struct i2c_algorithm mxs_i2c_algo = {
.master_xfer = mxs_i2c_xfer,
.functionality = mxs_i2c_func,
};
static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param)
{
struct mxs_i2c_dev *i2c = param;
if (!mxs_dma_is_apbx(chan))
return false;
if (chan->chan_id != i2c->dma_channel)
return false;
chan->private = &i2c->dma_data;
return true;
}
static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
{
uint32_t speed;
struct device *dev = i2c->dev;
struct device_node *node = dev->of_node;
int ret;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
*/
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
dev_err(dev, "Failed to get DMA channel!\n");
return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
else if (speed == 400000)
i2c->speed = &mxs_i2c_400kHz_config;
else if (speed != 100000)
dev_warn(dev, "Unsupported I2C speed selected, using 100kHz\n");
return 0;
}
static int __devinit mxs_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mxs_i2c_dev *i2c;
struct i2c_adapter *adap;
struct pinctrl *pinctrl;
struct resource *res;
resource_size_t res_size;
int err, irq, dmairq;
dma_cap_mask_t mask;
pinctrl = devm_pinctrl_get_select_default(dev);
if (IS_ERR(pinctrl))
return PTR_ERR(pinctrl);
i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
dmairq = platform_get_irq(pdev, 1);
if (!res || irq < 0 || dmairq < 0)
return -ENOENT;
res_size = resource_size(res);
if (!devm_request_mem_region(dev, res->start, res_size, res->name))
return -EBUSY;
i2c->regs = devm_ioremap_nocache(dev, res->start, res_size);
if (!i2c->regs)
return -EBUSY;
err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
if (err)
return err;
i2c->dev = dev;
i2c->speed = &mxs_i2c_95kHz_config;
if (dev->of_node) {
err = mxs_i2c_get_ofdata(i2c);
if (err)
return err;
}
/* Setup the DMA */
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
i2c->dma_data.chan_irq = dmairq;
i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
if (!i2c->dmach) {
dev_err(dev, "Failed to request dma\n");
return -ENODEV;
}
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
mxs_i2c_reset(i2c);
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
adap->owner = THIS_MODULE;
adap->algo = &mxs_i2c_algo;
adap->dev.parent = dev;
adap->nr = pdev->id;
adap->dev.of_node = pdev->dev.of_node;
i2c_set_adapdata(adap, i2c);
err = i2c_add_numbered_adapter(adap);
if (err) {
dev_err(dev, "Failed to add adapter (%d)\n", err);
writel(MXS_I2C_CTRL0_SFTRST,
i2c->regs + MXS_I2C_CTRL0_SET);
return err;
}
of_i2c_register_devices(adap);
return 0;
}
static int __devexit mxs_i2c_remove(struct platform_device *pdev)
{
struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev);
int ret;
ret = i2c_del_adapter(&i2c->adapter);
if (ret)
return -EBUSY;
if (i2c->dmach)
dma_release_channel(i2c->dmach);
writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
platform_set_drvdata(pdev, NULL);
return 0;
}
static const struct of_device_id mxs_i2c_dt_ids[] = {
{ .compatible = "fsl,imx28-i2c", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids);
static struct platform_driver mxs_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = mxs_i2c_dt_ids,
},
.remove = __devexit_p(mxs_i2c_remove),
};
static int __init mxs_i2c_init(void)
{
return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe);
}
subsys_initcall(mxs_i2c_init);
static void __exit mxs_i2c_exit(void)
{
platform_driver_unregister(&mxs_i2c_driver);
}
module_exit(mxs_i2c_exit);
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
MODULE_DESCRIPTION("MXS I2C Bus Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);