https://github.com/torvalds/linux
Tip revision: 899611ee7d373e5eeda08e9a8632684e1ebbbf00 authored by Linus Torvalds on 29 September 2010, 01:01:22 UTC
Linux 2.6.36-rc6
Linux 2.6.36-rc6
Tip revision: 899611e
elsa_cs.c
/*======================================================================
An elsa_cs PCMCIA client driver
This driver is for the Elsa PCM ISDN Cards, i.e. the MicroLink
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Modifications from dummy_cs.c are Copyright (C) 1999-2001 Klaus
Lichtenwalder <Lichtenwalder@ACM.org>. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
which case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
======================================================================*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/system.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include "hisax_cfg.h"
MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Elsa PCM cards");
MODULE_AUTHOR("Klaus Lichtenwalder");
MODULE_LICENSE("Dual MPL/GPL");
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
/*====================================================================*/
/*
The event() function is this driver's Card Services event handler.
It will be called by Card Services when an appropriate card status
event is received. The config() and release() entry points are
used to configure or release a socket, in response to card insertion
and ejection events. They are invoked from the elsa_cs event
handler.
*/
static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
static void elsa_cs_release(struct pcmcia_device *link);
/*
The attach() and detach() entry points are used to create and destroy
"instances" of the driver, where each instance represents everything
needed to manage one actual PCMCIA card.
*/
static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
struct pcmcia_device *p_dev;
int busy;
int cardnr;
} local_info_t;
/*======================================================================
elsa_cs_attach() creates an "instance" of the driver, allocatingx
local data structures for one device. The device is registered
with Card Services.
The dev_link structure is initialized, but we don't actually
configure the card at this point -- we wait until we receive a
card insertion event.
======================================================================*/
static int __devinit elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
dev_dbg(&link->dev, "elsa_cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) return -ENOMEM;
local->p_dev = link;
link->priv = local;
local->cardnr = -1;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
everything. In most clients, many details (i.e., number, sizes,
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
link->resource[0]->end = 8;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
return elsa_cs_config(link);
} /* elsa_cs_attach */
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
static void __devexit elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
dev_dbg(&link->dev, "elsa_cs_detach(0x%p)\n", link);
info->busy = 1;
elsa_cs_release(link);
kfree(info);
} /* elsa_cs_detach */
/*======================================================================
elsa_cs_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
device available to the system.
======================================================================*/
static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
int j;
p_dev->io_lines = 3;
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
p_dev->resource[0]->start = cf->io.win[0].base;
if (!pcmcia_request_io(p_dev))
return 0;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
for (j = 0x2f0; j > 0x100; j -= 0x10) {
p_dev->resource[0]->start = j;
if (!pcmcia_request_io(p_dev))
return 0;
}
}
return -ENODEV;
}
static int __devinit elsa_cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
IsdnCard_t icard;
dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
dev = link->priv;
i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
if (i != 0)
goto failed;
if (!link->irq)
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
goto failed;
/* Finally, report what we've done */
dev_info(&link->dev, "index 0x%02x: ",
link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
if (link->resource[0])
printk(" & %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
printk("\n");
icard.para[0] = link->irq;
icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
if (i < 0) {
printk(KERN_ERR "elsa_cs: failed to initialize Elsa "
"PCMCIA %d with %pR\n", i, link->resource[0]);
elsa_cs_release(link);
} else
((local_info_t*)link->priv)->cardnr = i;
return 0;
failed:
elsa_cs_release(link);
return -ENODEV;
} /* elsa_cs_config */
/*======================================================================
After a card is removed, elsa_cs_release() will unregister the net
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
======================================================================*/
static void elsa_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
dev_dbg(&link->dev, "elsa_cs_release(0x%p)\n", link);
if (local) {
if (local->cardnr >= 0) {
/* no unregister function with hisax */
HiSax_closecard(local->cardnr);
}
}
pcmcia_disable_device(link);
} /* elsa_cs_release */
static int elsa_suspend(struct pcmcia_device *link)
{
local_info_t *dev = link->priv;
dev->busy = 1;
return 0;
}
static int elsa_resume(struct pcmcia_device *link)
{
local_info_t *dev = link->priv;
dev->busy = 0;
return 0;
}
static struct pcmcia_device_id elsa_ids[] = {
PCMCIA_DEVICE_PROD_ID12("ELSA AG (Aachen, Germany)", "MicroLink ISDN/MC ", 0x983de2c4, 0x333ba257),
PCMCIA_DEVICE_PROD_ID12("ELSA GmbH, Aachen", "MicroLink ISDN/MC ", 0x639e5718, 0x333ba257),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, elsa_ids);
static struct pcmcia_driver elsa_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "elsa_cs",
},
.probe = elsa_cs_probe,
.remove = __devexit_p(elsa_cs_detach),
.id_table = elsa_ids,
.suspend = elsa_suspend,
.resume = elsa_resume,
};
static int __init init_elsa_cs(void)
{
return pcmcia_register_driver(&elsa_cs_driver);
}
static void __exit exit_elsa_cs(void)
{
pcmcia_unregister_driver(&elsa_cs_driver);
}
module_init(init_elsa_cs);
module_exit(exit_elsa_cs);