https://github.com/torvalds/linux
Tip revision: 19583ca584d6f574384e17fe7613dfaeadcdc4a6 authored by Linus Torvalds on 03 August 2014, 22:25:02 UTC
Linux 3.16
Linux 3.16
Tip revision: 19583ca
st5481_b.c
/*
* Driver for ST5481 USB ISDN modem
*
* Author Frode Isaksen
* Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
* 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/bitrev.h>
#include "st5481.h"
static inline void B_L1L2(struct st5481_bcs *bcs, int pr, void *arg)
{
struct hisax_if *ifc = (struct hisax_if *) &bcs->b_if;
ifc->l1l2(ifc, pr, arg);
}
/*
* Encode and transmit next frame.
*/
static void usb_b_out(struct st5481_bcs *bcs, int buf_nr)
{
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
struct urb *urb;
unsigned int packet_size, offset;
int len, buf_size, bytes_sent;
int i;
struct sk_buff *skb;
if (test_and_set_bit(buf_nr, &b_out->busy)) {
DBG(4, "ep %d urb %d busy", (bcs->channel + 1) * 2, buf_nr);
return;
}
urb = b_out->urb[buf_nr];
// Adjust isoc buffer size according to flow state
if (b_out->flow_event & (OUT_DOWN | OUT_UNDERRUN)) {
buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST;
packet_size = SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST;
DBG(4, "B%d,adjust flow,add %d bytes", bcs->channel + 1, B_FLOW_ADJUST);
} else if (b_out->flow_event & OUT_UP) {
buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST;
packet_size = SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST;
DBG(4, "B%d,adjust flow,remove %d bytes", bcs->channel + 1, B_FLOW_ADJUST);
} else {
buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT;
packet_size = 8;
}
b_out->flow_event = 0;
len = 0;
while (len < buf_size) {
if ((skb = b_out->tx_skb)) {
DBG_SKB(0x100, skb);
DBG(4, "B%d,len=%d", bcs->channel + 1, skb->len);
if (bcs->mode == L1_MODE_TRANS) {
bytes_sent = buf_size - len;
if (skb->len < bytes_sent)
bytes_sent = skb->len;
{ /* swap tx bytes to get hearable audio data */
register unsigned char *src = skb->data;
register unsigned char *dest = urb->transfer_buffer + len;
register unsigned int count;
for (count = 0; count < bytes_sent; count++)
*dest++ = bitrev8(*src++);
}
len += bytes_sent;
} else {
len += isdnhdlc_encode(&b_out->hdlc_state,
skb->data, skb->len, &bytes_sent,
urb->transfer_buffer + len, buf_size-len);
}
skb_pull(skb, bytes_sent);
if (!skb->len) {
// Frame sent
b_out->tx_skb = NULL;
B_L1L2(bcs, PH_DATA | CONFIRM, (void *)(unsigned long) skb->truesize);
dev_kfree_skb_any(skb);
/* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */
/* st5481B_sched_event(bcs, B_XMTBUFREADY); */
/* } */
}
} else {
if (bcs->mode == L1_MODE_TRANS) {
memset(urb->transfer_buffer + len, 0xff, buf_size-len);
len = buf_size;
} else {
// Send flags
len += isdnhdlc_encode(&b_out->hdlc_state,
NULL, 0, &bytes_sent,
urb->transfer_buffer + len, buf_size-len);
}
}
}
// Prepare the URB
for (i = 0, offset = 0; offset < len; i++) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = packet_size;
offset += packet_size;
packet_size = SIZE_ISO_PACKETS_B_OUT;
}
urb->transfer_buffer_length = len;
urb->number_of_packets = i;
urb->dev = adapter->usb_dev;
DBG_ISO_PACKET(0x200, urb);
SUBMIT_URB(urb, GFP_NOIO);
}
/*
* Start transferring (flags or data) on the B channel, since
* FIFO counters has been set to a non-zero value.
*/
static void st5481B_start_xfer(void *context)
{
struct st5481_bcs *bcs = context;
DBG(4, "B%d", bcs->channel + 1);
// Start transmitting (flags or data) on B channel
usb_b_out(bcs, 0);
usb_b_out(bcs, 1);
}
/*
* If the adapter has only 2 LEDs, the green
* LED will blink with a rate depending
* on the number of channels opened.
*/
static void led_blink(struct st5481_adapter *adapter)
{
u_char leds = adapter->leds;
// 50 frames/sec for each channel
if (++adapter->led_counter % 50) {
return;
}
if (adapter->led_counter % 100) {
leds |= GREEN_LED;
} else {
leds &= ~GREEN_LED;
}
st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, leds, NULL, NULL);
}
static void usb_b_out_complete(struct urb *urb)
{
struct st5481_bcs *bcs = urb->context;
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
int buf_nr;
buf_nr = get_buf_nr(b_out->urb, urb);
test_and_clear_bit(buf_nr, &b_out->busy);
if (unlikely(urb->status < 0)) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(4, "urb killed status %d", urb->status);
return; // Give up
default:
WARNING("urb status %d", urb->status);
if (b_out->busy == 0) {
st5481_usb_pipe_reset(adapter, (bcs->channel + 1) * 2 | USB_DIR_OUT, NULL, NULL);
}
break;
}
}
usb_b_out(bcs, buf_nr);
if (adapter->number_of_leds == 2)
led_blink(adapter);
}
/*
* Start or stop the transfer on the B channel.
*/
static void st5481B_mode(struct st5481_bcs *bcs, int mode)
{
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
DBG(4, "B%d,mode=%d", bcs->channel + 1, mode);
if (bcs->mode == mode)
return;
bcs->mode = mode;
// Cancel all USB transfers on this B channel
usb_unlink_urb(b_out->urb[0]);
usb_unlink_urb(b_out->urb[1]);
b_out->busy = 0;
st5481_in_mode(&bcs->b_in, mode);
if (bcs->mode != L1_MODE_NULL) {
// Open the B channel
if (bcs->mode != L1_MODE_TRANS) {
u32 features = HDLC_BITREVERSE;
if (bcs->mode == L1_MODE_HDLC_56K)
features |= HDLC_56KBIT;
isdnhdlc_out_init(&b_out->hdlc_state, features);
}
st5481_usb_pipe_reset(adapter, (bcs->channel + 1) * 2, NULL, NULL);
// Enable B channel interrupts
st5481_usb_device_ctrl_msg(adapter, FFMSK_B1 + (bcs->channel * 2),
OUT_UP + OUT_DOWN + OUT_UNDERRUN, NULL, NULL);
// Enable B channel FIFOs
st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel * 2), 32, st5481B_start_xfer, bcs);
if (adapter->number_of_leds == 4) {
if (bcs->channel == 0) {
adapter->leds |= B1_LED;
} else {
adapter->leds |= B2_LED;
}
}
} else {
// Disble B channel interrupts
st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL);
// Disable B channel FIFOs
st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel * 2), 0, NULL, NULL);
if (adapter->number_of_leds == 4) {
if (bcs->channel == 0) {
adapter->leds &= ~B1_LED;
} else {
adapter->leds &= ~B2_LED;
}
} else {
st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, adapter->leds, NULL, NULL);
}
if (b_out->tx_skb) {
dev_kfree_skb_any(b_out->tx_skb);
b_out->tx_skb = NULL;
}
}
}
static int st5481_setup_b_out(struct st5481_bcs *bcs)
{
struct usb_device *dev = bcs->adapter->usb_dev;
struct usb_interface *intf;
struct usb_host_interface *altsetting = NULL;
struct usb_host_endpoint *endpoint;
struct st5481_b_out *b_out = &bcs->b_out;
DBG(4, "");
intf = usb_ifnum_to_if(dev, 0);
if (intf)
altsetting = usb_altnum_to_altsetting(intf, 3);
if (!altsetting)
return -ENXIO;
// Allocate URBs and buffers for the B channel out
endpoint = &altsetting->endpoint[EP_B1_OUT - 1 + bcs->channel * 2];
DBG(4, "endpoint address=%02x,packet size=%d",
endpoint->desc.bEndpointAddress, le16_to_cpu(endpoint->desc.wMaxPacketSize));
// Allocate memory for 8000bytes/sec + extra bytes if underrun
return st5481_setup_isocpipes(b_out->urb, dev,
usb_sndisocpipe(dev, endpoint->desc.bEndpointAddress),
NUM_ISO_PACKETS_B, SIZE_ISO_PACKETS_B_OUT,
NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST,
usb_b_out_complete, bcs);
}
static void st5481_release_b_out(struct st5481_bcs *bcs)
{
struct st5481_b_out *b_out = &bcs->b_out;
DBG(4, "");
st5481_release_isocpipes(b_out->urb);
}
int st5481_setup_b(struct st5481_bcs *bcs)
{
int retval;
DBG(4, "");
retval = st5481_setup_b_out(bcs);
if (retval)
goto err;
bcs->b_in.bufsize = HSCX_BUFMAX;
bcs->b_in.num_packets = NUM_ISO_PACKETS_B;
bcs->b_in.packet_size = SIZE_ISO_PACKETS_B_IN;
bcs->b_in.ep = (bcs->channel ? EP_B2_IN : EP_B1_IN) | USB_DIR_IN;
bcs->b_in.counter = bcs->channel ? IN_B2_COUNTER : IN_B1_COUNTER;
bcs->b_in.adapter = bcs->adapter;
bcs->b_in.hisax_if = &bcs->b_if.ifc;
retval = st5481_setup_in(&bcs->b_in);
if (retval)
goto err_b_out;
return 0;
err_b_out:
st5481_release_b_out(bcs);
err:
return retval;
}
/*
* Release buffers and URBs for the B channels
*/
void st5481_release_b(struct st5481_bcs *bcs)
{
DBG(4, "");
st5481_release_in(&bcs->b_in);
st5481_release_b_out(bcs);
}
/*
* st5481_b_l2l1 is the entry point for upper layer routines that want to
* transmit on the B channel. PH_DATA | REQUEST is a normal packet that
* we either start transmitting (if idle) or queue (if busy).
* PH_PULL | REQUEST can be called to request a callback message
* (PH_PULL | CONFIRM)
* once the link is idle. After a "pull" callback, the upper layer
* routines can use PH_PULL | INDICATION to send data.
*/
void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg)
{
struct st5481_bcs *bcs = ifc->priv;
struct sk_buff *skb = arg;
long mode;
DBG(4, "");
switch (pr) {
case PH_DATA | REQUEST:
BUG_ON(bcs->b_out.tx_skb);
bcs->b_out.tx_skb = skb;
break;
case PH_ACTIVATE | REQUEST:
mode = (long) arg;
DBG(4, "B%d,PH_ACTIVATE_REQUEST %ld", bcs->channel + 1, mode);
st5481B_mode(bcs, mode);
B_L1L2(bcs, PH_ACTIVATE | INDICATION, NULL);
break;
case PH_DEACTIVATE | REQUEST:
DBG(4, "B%d,PH_DEACTIVATE_REQUEST", bcs->channel + 1);
st5481B_mode(bcs, L1_MODE_NULL);
B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL);
break;
default:
WARNING("pr %#x\n", pr);
}
}