https://github.com/torvalds/linux
Tip revision: 2ef96a5bb12be62ef75b5828c0aab838ebb29cb8 authored by Linus Torvalds on 10 May 2020, 22:16:58 UTC
Linux 5.7-rc5
Linux 5.7-rc5
Tip revision: 2ef96a5
cpia2_registers.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
/****************************************************************************
*
* Filename: cpia2registers.h
*
* Copyright 2001, STMicrolectronics, Inc.
*
* Description:
* Definitions for the CPia2 register set
*
****************************************************************************/
#ifndef CPIA2_REGISTER_HEADER
#define CPIA2_REGISTER_HEADER
/***
* System register set (Bank 0)
***/
#define CPIA2_SYSTEM_DEVICE_HI 0x00
#define CPIA2_SYSTEM_DEVICE_LO 0x01
#define CPIA2_SYSTEM_SYSTEM_CONTROL 0x02
#define CPIA2_SYSTEM_CONTROL_LOW_POWER 0x00
#define CPIA2_SYSTEM_CONTROL_HIGH_POWER 0x01
#define CPIA2_SYSTEM_CONTROL_SUSPEND 0x02
#define CPIA2_SYSTEM_CONTROL_V2W_ERR 0x10
#define CPIA2_SYSTEM_CONTROL_RB_ERR 0x10
#define CPIA2_SYSTEM_CONTROL_CLEAR_ERR 0x80
#define CPIA2_SYSTEM_INT_PACKET_CTRL 0x04
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX 0x01
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_EOF 0x02
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_INT1 0x04
#define CPIA2_SYSTEM_CACHE_CTRL 0x05
#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_RESET 0x01
#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_FLUSH 0x02
#define CPIA2_SYSTEM_SERIAL_CTRL 0x06
#define CPIA2_SYSTEM_SERIAL_CTRL_NULL_CMD 0x00
#define CPIA2_SYSTEM_SERIAL_CTRL_START_CMD 0x01
#define CPIA2_SYSTEM_SERIAL_CTRL_STOP_CMD 0x02
#define CPIA2_SYSTEM_SERIAL_CTRL_WRITE_CMD 0x03
#define CPIA2_SYSTEM_SERIAL_CTRL_READ_ACK_CMD 0x04
#define CPIA2_SYSTEM_SERIAL_CTRL_READ_NACK_CMD 0x05
#define CPIA2_SYSTEM_SERIAL_DATA 0x07
#define CPIA2_SYSTEM_VP_SERIAL_ADDR 0x08
/***
* I2C addresses for various devices in CPiA2
***/
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR 0x20
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_VP 0x88
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP 0x8A
#define CPIA2_SYSTEM_SPARE_REG1 0x09
#define CPIA2_SYSTEM_SPARE_REG2 0x0A
#define CPIA2_SYSTEM_SPARE_REG3 0x0B
#define CPIA2_SYSTEM_MC_PORT_0 0x0C
#define CPIA2_SYSTEM_MC_PORT_1 0x0D
#define CPIA2_SYSTEM_MC_PORT_2 0x0E
#define CPIA2_SYSTEM_MC_PORT_3 0x0F
#define CPIA2_SYSTEM_STATUS_PKT 0x20
#define CPIA2_SYSTEM_STATUS_PKT_END 0x27
#define CPIA2_SYSTEM_DESCRIP_VID_HI 0x30
#define CPIA2_SYSTEM_DESCRIP_VID_LO 0x31
#define CPIA2_SYSTEM_DESCRIP_PID_HI 0x32
#define CPIA2_SYSTEM_DESCRIP_PID_LO 0x33
#define CPIA2_SYSTEM_FW_VERSION_HI 0x34
#define CPIA2_SYSTEM_FW_VERSION_LO 0x35
#define CPIA2_SYSTEM_CACHE_START_INDEX 0x80
#define CPIA2_SYSTEM_CACHE_MAX_WRITES 0x10
/***
* VC register set (Bank 1)
***/
#define CPIA2_VC_ASIC_ID 0x80
#define CPIA2_VC_ASIC_REV 0x81
#define CPIA2_VC_PW_CTRL 0x82
#define CPIA2_VC_PW_CTRL_COLDSTART 0x01
#define CPIA2_VC_PW_CTRL_CP_CLK_EN 0x02
#define CPIA2_VC_PW_CTRL_VP_RESET_N 0x04
#define CPIA2_VC_PW_CTRL_VC_CLK_EN 0x08
#define CPIA2_VC_PW_CTRL_VC_RESET_N 0x10
#define CPIA2_VC_PW_CTRL_GOTO_SUSPEND 0x20
#define CPIA2_VC_PW_CTRL_UDC_SUSPEND 0x40
#define CPIA2_VC_PW_CTRL_PWR_DOWN 0x80
#define CPIA2_VC_WAKEUP 0x83
#define CPIA2_VC_WAKEUP_SW_ENABLE 0x01
#define CPIA2_VC_WAKEUP_XX_ENABLE 0x02
#define CPIA2_VC_WAKEUP_SW_ATWAKEUP 0x04
#define CPIA2_VC_WAKEUP_XX_ATWAKEUP 0x08
#define CPIA2_VC_CLOCK_CTRL 0x84
#define CPIA2_VC_CLOCK_CTRL_TESTUP72 0x01
#define CPIA2_VC_INT_ENABLE 0x88
#define CPIA2_VC_INT_ENABLE_XX_IE 0x01
#define CPIA2_VC_INT_ENABLE_SW_IE 0x02
#define CPIA2_VC_INT_ENABLE_VC_IE 0x04
#define CPIA2_VC_INT_ENABLE_USBDATA_IE 0x08
#define CPIA2_VC_INT_ENABLE_USBSETUP_IE 0x10
#define CPIA2_VC_INT_ENABLE_USBCFG_IE 0x20
#define CPIA2_VC_INT_FLAG 0x89
#define CPIA2_VC_INT_ENABLE_XX_FLAG 0x01
#define CPIA2_VC_INT_ENABLE_SW_FLAG 0x02
#define CPIA2_VC_INT_ENABLE_VC_FLAG 0x04
#define CPIA2_VC_INT_ENABLE_USBDATA_FLAG 0x08
#define CPIA2_VC_INT_ENABLE_USBSETUP_FLAG 0x10
#define CPIA2_VC_INT_ENABLE_USBCFG_FLAG 0x20
#define CPIA2_VC_INT_ENABLE_SET_RESET_BIT 0x80
#define CPIA2_VC_INT_STATE 0x8A
#define CPIA2_VC_INT_STATE_XX_STATE 0x01
#define CPIA2_VC_INT_STATE_SW_STATE 0x02
#define CPIA2_VC_MP_DIR 0x90
#define CPIA2_VC_MP_DIR_INPUT 0x00
#define CPIA2_VC_MP_DIR_OUTPUT 0x01
#define CPIA2_VC_MP_DATA 0x91
#define CPIA2_VC_DP_CTRL 0x98
#define CPIA2_VC_DP_CTRL_MODE_0 0x00
#define CPIA2_VC_DP_CTRL_MODE_A 0x01
#define CPIA2_VC_DP_CTRL_MODE_B 0x02
#define CPIA2_VC_DP_CTRL_MODE_C 0x03
#define CPIA2_VC_DP_CTRL_FAKE_FST 0x04
#define CPIA2_VC_AD_CTRL 0x99
#define CPIA2_VC_AD_CTRL_SRC_0 0x00
#define CPIA2_VC_AD_CTRL_SRC_DIGI_A 0x01
#define CPIA2_VC_AD_CTRL_SRC_REG 0x02
#define CPIA2_VC_AD_CTRL_DST_USB 0x00
#define CPIA2_VC_AD_CTRL_DST_REG 0x04
#define CPIA2_VC_AD_TEST_IN 0x9B
#define CPIA2_VC_AD_TEST_OUT 0x9C
#define CPIA2_VC_AD_STATUS 0x9D
#define CPIA2_VC_AD_STATUS_EMPTY 0x01
#define CPIA2_VC_AD_STATUS_FULL 0x02
#define CPIA2_VC_DP_DATA 0x9E
#define CPIA2_VC_ST_CTRL 0xA0
#define CPIA2_VC_ST_CTRL_SRC_VC 0x00
#define CPIA2_VC_ST_CTRL_SRC_DP 0x01
#define CPIA2_VC_ST_CTRL_SRC_REG 0x02
#define CPIA2_VC_ST_CTRL_RAW_SELECT 0x04
#define CPIA2_VC_ST_CTRL_DST_USB 0x00
#define CPIA2_VC_ST_CTRL_DST_DP 0x08
#define CPIA2_VC_ST_CTRL_DST_REG 0x10
#define CPIA2_VC_ST_CTRL_FIFO_ENABLE 0x20
#define CPIA2_VC_ST_CTRL_EOF_DETECT 0x40
#define CPIA2_VC_ST_TEST 0xA1
#define CPIA2_VC_ST_TEST_MODE_MANUAL 0x00
#define CPIA2_VC_ST_TEST_MODE_INCREMENT 0x02
#define CPIA2_VC_ST_TEST_AUTO_FILL 0x08
#define CPIA2_VC_ST_TEST_REPEAT_FIFO 0x10
#define CPIA2_VC_ST_TEST_IN 0xA2
#define CPIA2_VC_ST_TEST_OUT 0xA3
#define CPIA2_VC_ST_STATUS 0xA4
#define CPIA2_VC_ST_STATUS_EMPTY 0x01
#define CPIA2_VC_ST_STATUS_FULL 0x02
#define CPIA2_VC_ST_FRAME_DETECT_1 0xA5
#define CPIA2_VC_ST_FRAME_DETECT_2 0xA6
#define CPIA2_VC_USB_CTRL 0xA8
#define CPIA2_VC_USB_CTRL_CMD_STALLED 0x01
#define CPIA2_VC_USB_CTRL_CMD_READY 0x02
#define CPIA2_VC_USB_CTRL_CMD_STATUS 0x04
#define CPIA2_VC_USB_CTRL_CMD_STATUS_DIR 0x08
#define CPIA2_VC_USB_CTRL_CMD_NO_CLASH 0x10
#define CPIA2_VC_USB_CTRL_CMD_MICRO_ACCESS 0x80
#define CPIA2_VC_USB_STRM 0xA9
#define CPIA2_VC_USB_STRM_ISO_ENABLE 0x01
#define CPIA2_VC_USB_STRM_BLK_ENABLE 0x02
#define CPIA2_VC_USB_STRM_INT_ENABLE 0x04
#define CPIA2_VC_USB_STRM_AUD_ENABLE 0x08
#define CPIA2_VC_USB_STATUS 0xAA
#define CPIA2_VC_USB_STATUS_CMD_IN_PROGRESS 0x01
#define CPIA2_VC_USB_STATUS_CMD_STATUS_STALL 0x02
#define CPIA2_VC_USB_STATUS_CMD_HANDSHAKE 0x04
#define CPIA2_VC_USB_STATUS_CMD_OVERRIDE 0x08
#define CPIA2_VC_USB_STATUS_CMD_FIFO_BUSY 0x10
#define CPIA2_VC_USB_STATUS_BULK_REPEAT_TXN 0x20
#define CPIA2_VC_USB_STATUS_CONFIG_DONE 0x40
#define CPIA2_VC_USB_STATUS_USB_SUSPEND 0x80
#define CPIA2_VC_USB_CMDW 0xAB
#define CPIA2_VC_USB_DATARW 0xAC
#define CPIA2_VC_USB_INFO 0xAD
#define CPIA2_VC_USB_CONFIG 0xAE
#define CPIA2_VC_USB_SETTINGS 0xAF
#define CPIA2_VC_USB_SETTINGS_CONFIG_MASK 0x03
#define CPIA2_VC_USB_SETTINGS_INTERFACE_MASK 0x0C
#define CPIA2_VC_USB_SETTINGS_ALTERNATE_MASK 0x70
#define CPIA2_VC_USB_ISOLIM 0xB0
#define CPIA2_VC_USB_ISOFAILS 0xB1
#define CPIA2_VC_USB_ISOMAXPKTHI 0xB2
#define CPIA2_VC_USB_ISOMAXPKTLO 0xB3
#define CPIA2_VC_V2W_CTRL 0xB8
#define CPIA2_VC_V2W_SELECT 0x01
#define CPIA2_VC_V2W_SCL 0xB9
#define CPIA2_VC_V2W_SDA 0xBA
#define CPIA2_VC_VC_CTRL 0xC0
#define CPIA2_VC_VC_CTRL_RUN 0x01
#define CPIA2_VC_VC_CTRL_SINGLESHOT 0x02
#define CPIA2_VC_VC_CTRL_IDLING 0x04
#define CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES 0x10
#define CPIA2_VC_VC_CTRL_INHIBIT_Q_TABLES 0x20
#define CPIA2_VC_VC_CTRL_INHIBIT_PRIVATE 0x40
#define CPIA2_VC_VC_RESTART_IVAL_HI 0xC1
#define CPIA2_VC_VC_RESTART_IVAL_LO 0xC2
#define CPIA2_VC_VC_FORMAT 0xC3
#define CPIA2_VC_VC_FORMAT_UFIRST 0x01
#define CPIA2_VC_VC_FORMAT_MONO 0x02
#define CPIA2_VC_VC_FORMAT_DECIMATING 0x04
#define CPIA2_VC_VC_FORMAT_SHORTLINE 0x08
#define CPIA2_VC_VC_FORMAT_SELFTEST 0x10
#define CPIA2_VC_VC_CLOCKS 0xC4
#define CPIA2_VC_VC_CLOCKS_CLKDIV_MASK 0x03
#define CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 0x04
#define CPIA2_VC_VC_672_CLOCKS_SCALING 0x08
#define CPIA2_VC_VC_CLOCKS_LOGDIV0 0x00
#define CPIA2_VC_VC_CLOCKS_LOGDIV1 0x01
#define CPIA2_VC_VC_CLOCKS_LOGDIV2 0x02
#define CPIA2_VC_VC_CLOCKS_LOGDIV3 0x03
#define CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 0x08
#define CPIA2_VC_VC_676_CLOCKS_SCALING 0x10
#define CPIA2_VC_VC_IHSIZE_LO 0xC5
#define CPIA2_VC_VC_XLIM_HI 0xC6
#define CPIA2_VC_VC_XLIM_LO 0xC7
#define CPIA2_VC_VC_YLIM_HI 0xC8
#define CPIA2_VC_VC_YLIM_LO 0xC9
#define CPIA2_VC_VC_OHSIZE 0xCA
#define CPIA2_VC_VC_OVSIZE 0xCB
#define CPIA2_VC_VC_HCROP 0xCC
#define CPIA2_VC_VC_VCROP 0xCD
#define CPIA2_VC_VC_HPHASE 0xCE
#define CPIA2_VC_VC_VPHASE 0xCF
#define CPIA2_VC_VC_HISPAN 0xD0
#define CPIA2_VC_VC_VISPAN 0xD1
#define CPIA2_VC_VC_HICROP 0xD2
#define CPIA2_VC_VC_VICROP 0xD3
#define CPIA2_VC_VC_HFRACT 0xD4
#define CPIA2_VC_VC_HFRACT_DEN_MASK 0x0F
#define CPIA2_VC_VC_HFRACT_NUM_MASK 0xF0
#define CPIA2_VC_VC_VFRACT 0xD5
#define CPIA2_VC_VC_VFRACT_DEN_MASK 0x0F
#define CPIA2_VC_VC_VFRACT_NUM_MASK 0xF0
#define CPIA2_VC_VC_JPEG_OPT 0xD6
#define CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE 0x01
#define CPIA2_VC_VC_JPEG_OPT_NO_DC_AUTO_SQUEEZE 0x02
#define CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE 0x04
#define CPIA2_VC_VC_JPEG_OPT_DEFAULT (CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE|\
CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE)
#define CPIA2_VC_VC_CREEP_PERIOD 0xD7
#define CPIA2_VC_VC_USER_SQUEEZE 0xD8
#define CPIA2_VC_VC_TARGET_KB 0xD9
#define CPIA2_VC_VC_AUTO_SQUEEZE 0xE6
/***
* VP register set (Bank 2)
***/
#define CPIA2_VP_DEVICEH 0
#define CPIA2_VP_DEVICEL 1
#define CPIA2_VP_SYSTEMSTATE 0x02
#define CPIA2_VP_SYSTEMSTATE_HK_ALIVE 0x01
#define CPIA2_VP_SYSTEMCTRL 0x03
#define CPIA2_VP_SYSTEMCTRL_REQ_CLEAR_ERROR 0x80
#define CPIA2_VP_SYSTEMCTRL_POWER_DOWN_PLL 0x20
#define CPIA2_VP_SYSTEMCTRL_REQ_SUSPEND_STATE 0x10
#define CPIA2_VP_SYSTEMCTRL_REQ_SERIAL_WAKEUP 0x08
#define CPIA2_VP_SYSTEMCTRL_REQ_AUTOLOAD 0x04
#define CPIA2_VP_SYSTEMCTRL_HK_CONTROL 0x02
#define CPIA2_VP_SYSTEMCTRL_POWER_CONTROL 0x01
#define CPIA2_VP_SENSOR_FLAGS 0x05
#define CPIA2_VP_SENSOR_FLAGS_404 0x01
#define CPIA2_VP_SENSOR_FLAGS_407 0x02
#define CPIA2_VP_SENSOR_FLAGS_409 0x04
#define CPIA2_VP_SENSOR_FLAGS_410 0x08
#define CPIA2_VP_SENSOR_FLAGS_500 0x10
#define CPIA2_VP_SENSOR_REV 0x06
#define CPIA2_VP_DEVICE_CONFIG 0x07
#define CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE 0x01
#define CPIA2_VP_GPIO_DIRECTION 0x08
#define CPIA2_VP_GPIO_READ 0xFF
#define CPIA2_VP_GPIO_WRITE 0x00
#define CPIA2_VP_GPIO_DATA 0x09
#define CPIA2_VP_RAM_ADDR_H 0x0A
#define CPIA2_VP_RAM_ADDR_L 0x0B
#define CPIA2_VP_RAM_DATA 0x0C
#define CPIA2_VP_PATCH_REV 0x0F
#define CPIA2_VP4_USER_MODE 0x10
#define CPIA2_VP5_USER_MODE 0x13
#define CPIA2_VP_USER_MODE_CIF 0x01
#define CPIA2_VP_USER_MODE_QCIFDS 0x02
#define CPIA2_VP_USER_MODE_QCIFPTC 0x04
#define CPIA2_VP_USER_MODE_QVGADS 0x08
#define CPIA2_VP_USER_MODE_QVGAPTC 0x10
#define CPIA2_VP_USER_MODE_VGA 0x20
#define CPIA2_VP4_FRAMERATE_REQUEST 0x11
#define CPIA2_VP5_FRAMERATE_REQUEST 0x14
#define CPIA2_VP_FRAMERATE_60 0x80
#define CPIA2_VP_FRAMERATE_50 0x40
#define CPIA2_VP_FRAMERATE_30 0x20
#define CPIA2_VP_FRAMERATE_25 0x10
#define CPIA2_VP_FRAMERATE_15 0x08
#define CPIA2_VP_FRAMERATE_12_5 0x04
#define CPIA2_VP_FRAMERATE_7_5 0x02
#define CPIA2_VP_FRAMERATE_6_25 0x01
#define CPIA2_VP4_USER_EFFECTS 0x12
#define CPIA2_VP5_USER_EFFECTS 0x15
#define CPIA2_VP_USER_EFFECTS_COLBARS 0x01
#define CPIA2_VP_USER_EFFECTS_COLBARS_GRAD 0x02
#define CPIA2_VP_USER_EFFECTS_MIRROR 0x04
#define CPIA2_VP_USER_EFFECTS_FLIP 0x40 // VP5 only
/* NOTE: CPIA2_VP_EXPOSURE_MODES shares the same register as VP5 User
* Effects */
#define CPIA2_VP_EXPOSURE_MODES 0x15
#define CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER 0x20
#define CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP 0x10
#define CPIA2_VP4_EXPOSURE_TARGET 0x16 // VP4
#define CPIA2_VP5_EXPOSURE_TARGET 0x20 // VP5
#define CPIA2_VP_FLICKER_MODES 0x1B
#define CPIA2_VP_FLICKER_MODES_50HZ 0x80
#define CPIA2_VP_FLICKER_MODES_CUSTOM_FLT_FFREQ 0x40
#define CPIA2_VP_FLICKER_MODES_NEVER_FLICKER 0x20
#define CPIA2_VP_FLICKER_MODES_INHIBIT_RUB 0x10
#define CPIA2_VP_FLICKER_MODES_ADJUST_LINE_FREQ 0x08
#define CPIA2_VP_FLICKER_MODES_CUSTOM_INT_FFREQ 0x04
#define CPIA2_VP_UMISC 0x1D
#define CPIA2_VP_UMISC_FORCE_MONO 0x80
#define CPIA2_VP_UMISC_FORCE_ID_MASK 0x40
#define CPIA2_VP_UMISC_INHIBIT_AUTO_FGS 0x20
#define CPIA2_VP_UMISC_INHIBIT_AUTO_DIMS 0x08
#define CPIA2_VP_UMISC_OPT_FOR_SENSOR_DS 0x04
#define CPIA2_VP_UMISC_INHIBIT_AUTO_MODE_INT 0x02
#define CPIA2_VP5_ANTIFLKRSETUP 0x22 //34
#define CPIA2_VP_INTERPOLATION 0x24
#define CPIA2_VP_INTERPOLATION_EVEN_FIRST 0x40
#define CPIA2_VP_INTERPOLATION_HJOG 0x20
#define CPIA2_VP_INTERPOLATION_VJOG 0x10
#define CPIA2_VP_GAMMA 0x25
#define CPIA2_VP_DEFAULT_GAMMA 0x10
#define CPIA2_VP_YRANGE 0x26
#define CPIA2_VP_SATURATION 0x27
#define CPIA2_VP5_MYBLACK_LEVEL 0x3A //58
#define CPIA2_VP5_MCYRANGE 0x3B //59
#define CPIA2_VP5_MYCEILING 0x3C //60
#define CPIA2_VP5_MCUVSATURATION 0x3D //61
#define CPIA2_VP_REHASH_VALUES 0x60
/***
* Common sensor registers
***/
#define CPIA2_SENSOR_DEVICE_H 0x00
#define CPIA2_SENSOR_DEVICE_L 0x01
#define CPIA2_SENSOR_DATA_FORMAT 0x16
#define CPIA2_SENSOR_DATA_FORMAT_HMIRROR 0x08
#define CPIA2_SENSOR_DATA_FORMAT_VMIRROR 0x10
#define CPIA2_SENSOR_CR1 0x76
#define CPIA2_SENSOR_CR1_STAND_BY 0x01
#define CPIA2_SENSOR_CR1_DOWN_RAMP_GEN 0x02
#define CPIA2_SENSOR_CR1_DOWN_COLUMN_ADC 0x04
#define CPIA2_SENSOR_CR1_DOWN_CAB_REGULATOR 0x08
#define CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR 0x10
#define CPIA2_SENSOR_CR1_DOWN_VRT_AMP 0x20
#define CPIA2_SENSOR_CR1_DOWN_BAND_GAP 0x40
#endif