https://github.com/torvalds/linux
Tip revision: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 authored by Linus Torvalds on 12 May 2024, 21:12:29 UTC
Linux 6.9
Linux 6.9
Tip revision: a38297e
dw-xdata-pcie.c
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
* Synopsys DesignWare xData driver
*
* Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
*/
#include <linux/miscdevice.h>
#include <linux/bitfield.h>
#include <linux/pci-epf.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/pci.h>
#define DW_XDATA_DRIVER_NAME "dw-xdata-pcie"
#define DW_XDATA_EP_MEM_OFFSET 0x8000000
static DEFINE_IDA(xdata_ida);
#define STATUS_DONE BIT(0)
#define CONTROL_DOORBELL BIT(0)
#define CONTROL_IS_WRITE BIT(1)
#define CONTROL_LENGTH(a) FIELD_PREP(GENMASK(13, 2), a)
#define CONTROL_PATTERN_INC BIT(16)
#define CONTROL_NO_ADDR_INC BIT(18)
#define XPERF_CONTROL_ENABLE BIT(5)
#define BURST_REPEAT BIT(31)
#define BURST_VALUE 0x1001
#define PATTERN_VALUE 0x0
struct dw_xdata_regs {
u32 addr_lsb; /* 0x000 */
u32 addr_msb; /* 0x004 */
u32 burst_cnt; /* 0x008 */
u32 control; /* 0x00c */
u32 pattern; /* 0x010 */
u32 status; /* 0x014 */
u32 RAM_addr; /* 0x018 */
u32 RAM_port; /* 0x01c */
u32 _reserved0[14]; /* 0x020..0x054 */
u32 perf_control; /* 0x058 */
u32 _reserved1[41]; /* 0x05c..0x0fc */
u32 wr_cnt_lsb; /* 0x100 */
u32 wr_cnt_msb; /* 0x104 */
u32 rd_cnt_lsb; /* 0x108 */
u32 rd_cnt_msb; /* 0x10c */
} __packed;
struct dw_xdata_region {
phys_addr_t paddr; /* physical address */
void __iomem *vaddr; /* virtual address */
};
struct dw_xdata {
struct dw_xdata_region rg_region; /* registers */
size_t max_wr_len; /* max wr xfer len */
size_t max_rd_len; /* max rd xfer len */
struct mutex mutex;
struct pci_dev *pdev;
struct miscdevice misc_dev;
};
static inline struct dw_xdata_regs __iomem *__dw_regs(struct dw_xdata *dw)
{
return dw->rg_region.vaddr;
}
static void dw_xdata_stop(struct dw_xdata *dw)
{
u32 burst;
mutex_lock(&dw->mutex);
burst = readl(&(__dw_regs(dw)->burst_cnt));
if (burst & BURST_REPEAT) {
burst &= ~(u32)BURST_REPEAT;
writel(burst, &(__dw_regs(dw)->burst_cnt));
}
mutex_unlock(&dw->mutex);
}
static void dw_xdata_start(struct dw_xdata *dw, bool write)
{
struct device *dev = &dw->pdev->dev;
u32 control, status;
/* Stop first if xfer in progress */
dw_xdata_stop(dw);
mutex_lock(&dw->mutex);
/* Clear status register */
writel(0x0, &(__dw_regs(dw)->status));
/* Burst count register set for continuous until stopped */
writel(BURST_REPEAT | BURST_VALUE, &(__dw_regs(dw)->burst_cnt));
/* Pattern register */
writel(PATTERN_VALUE, &(__dw_regs(dw)->pattern));
/* Control register */
control = CONTROL_DOORBELL | CONTROL_PATTERN_INC | CONTROL_NO_ADDR_INC;
if (write) {
control |= CONTROL_IS_WRITE;
control |= CONTROL_LENGTH(dw->max_wr_len);
} else {
control |= CONTROL_LENGTH(dw->max_rd_len);
}
writel(control, &(__dw_regs(dw)->control));
/*
* The xData HW block needs about 100 ms to initiate the traffic
* generation according this HW block datasheet.
*/
usleep_range(100, 150);
status = readl(&(__dw_regs(dw)->status));
mutex_unlock(&dw->mutex);
if (!(status & STATUS_DONE))
dev_dbg(dev, "xData: started %s direction\n",
write ? "write" : "read");
}
static void dw_xdata_perf_meas(struct dw_xdata *dw, u64 *data, bool write)
{
if (write) {
*data = readl(&(__dw_regs(dw)->wr_cnt_msb));
*data <<= 32;
*data |= readl(&(__dw_regs(dw)->wr_cnt_lsb));
} else {
*data = readl(&(__dw_regs(dw)->rd_cnt_msb));
*data <<= 32;
*data |= readl(&(__dw_regs(dw)->rd_cnt_lsb));
}
}
static u64 dw_xdata_perf_diff(u64 *m1, u64 *m2, u64 time)
{
u64 rate = (*m1 - *m2);
rate *= (1000 * 1000 * 1000);
rate >>= 20;
rate = DIV_ROUND_CLOSEST_ULL(rate, time);
return rate;
}
static void dw_xdata_perf(struct dw_xdata *dw, u64 *rate, bool write)
{
struct device *dev = &dw->pdev->dev;
u64 data[2], time[2], diff;
mutex_lock(&dw->mutex);
/* First acquisition of current count frames */
writel(0x0, &(__dw_regs(dw)->perf_control));
dw_xdata_perf_meas(dw, &data[0], write);
time[0] = jiffies;
writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control));
/*
* Wait 100ms between the 1st count frame acquisition and the 2nd
* count frame acquisition, in order to calculate the speed later
*/
mdelay(100);
/* Second acquisition of current count frames */
writel(0x0, &(__dw_regs(dw)->perf_control));
dw_xdata_perf_meas(dw, &data[1], write);
time[1] = jiffies;
writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control));
/*
* Speed calculation
*
* rate = (2nd count frames - 1st count frames) / (time elapsed)
*/
diff = jiffies_to_nsecs(time[1] - time[0]);
*rate = dw_xdata_perf_diff(&data[1], &data[0], diff);
mutex_unlock(&dw->mutex);
dev_dbg(dev, "xData: time=%llu us, %s=%llu MB/s\n",
diff, write ? "write" : "read", *rate);
}
static struct dw_xdata *misc_dev_to_dw(struct miscdevice *misc_dev)
{
return container_of(misc_dev, struct dw_xdata, misc_dev);
}
static ssize_t write_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct miscdevice *misc_dev = dev_get_drvdata(dev);
struct dw_xdata *dw = misc_dev_to_dw(misc_dev);
u64 rate;
dw_xdata_perf(dw, &rate, true);
return sysfs_emit(buf, "%llu\n", rate);
}
static ssize_t write_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct miscdevice *misc_dev = dev_get_drvdata(dev);
struct dw_xdata *dw = misc_dev_to_dw(misc_dev);
bool enabled;
int ret;
ret = kstrtobool(buf, &enabled);
if (ret < 0)
return ret;
if (enabled) {
dev_dbg(dev, "xData: requested write transfer\n");
dw_xdata_start(dw, true);
} else {
dev_dbg(dev, "xData: requested stop transfer\n");
dw_xdata_stop(dw);
}
return size;
}
static DEVICE_ATTR_RW(write);
static ssize_t read_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct miscdevice *misc_dev = dev_get_drvdata(dev);
struct dw_xdata *dw = misc_dev_to_dw(misc_dev);
u64 rate;
dw_xdata_perf(dw, &rate, false);
return sysfs_emit(buf, "%llu\n", rate);
}
static ssize_t read_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct miscdevice *misc_dev = dev_get_drvdata(dev);
struct dw_xdata *dw = misc_dev_to_dw(misc_dev);
bool enabled;
int ret;
ret = kstrtobool(buf, &enabled);
if (ret < 0)
return ret;
if (enabled) {
dev_dbg(dev, "xData: requested read transfer\n");
dw_xdata_start(dw, false);
} else {
dev_dbg(dev, "xData: requested stop transfer\n");
dw_xdata_stop(dw);
}
return size;
}
static DEVICE_ATTR_RW(read);
static struct attribute *xdata_attrs[] = {
&dev_attr_write.attr,
&dev_attr_read.attr,
NULL,
};
ATTRIBUTE_GROUPS(xdata);
static int dw_xdata_pcie_probe(struct pci_dev *pdev,
const struct pci_device_id *pid)
{
struct device *dev = &pdev->dev;
struct dw_xdata *dw;
char name[24];
u64 addr;
int err;
int id;
/* Enable PCI device */
err = pcim_enable_device(pdev);
if (err) {
dev_err(dev, "enabling device failed\n");
return err;
}
/* Mapping PCI BAR regions */
err = pcim_iomap_regions(pdev, BIT(BAR_0), pci_name(pdev));
if (err) {
dev_err(dev, "xData BAR I/O remapping failed\n");
return err;
}
pci_set_master(pdev);
/* Allocate memory */
dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
if (!dw)
return -ENOMEM;
/* Data structure initialization */
mutex_init(&dw->mutex);
dw->rg_region.vaddr = pcim_iomap_table(pdev)[BAR_0];
if (!dw->rg_region.vaddr)
return -ENOMEM;
dw->rg_region.paddr = pdev->resource[BAR_0].start;
dw->max_wr_len = pcie_get_mps(pdev);
dw->max_wr_len >>= 2;
dw->max_rd_len = pcie_get_readrq(pdev);
dw->max_rd_len >>= 2;
dw->pdev = pdev;
id = ida_alloc(&xdata_ida, GFP_KERNEL);
if (id < 0) {
dev_err(dev, "xData: unable to get id\n");
return id;
}
snprintf(name, sizeof(name), DW_XDATA_DRIVER_NAME ".%d", id);
dw->misc_dev.name = kstrdup(name, GFP_KERNEL);
if (!dw->misc_dev.name) {
err = -ENOMEM;
goto err_ida_remove;
}
dw->misc_dev.minor = MISC_DYNAMIC_MINOR;
dw->misc_dev.parent = dev;
dw->misc_dev.groups = xdata_groups;
writel(0x0, &(__dw_regs(dw)->RAM_addr));
writel(0x0, &(__dw_regs(dw)->RAM_port));
addr = dw->rg_region.paddr + DW_XDATA_EP_MEM_OFFSET;
writel(lower_32_bits(addr), &(__dw_regs(dw)->addr_lsb));
writel(upper_32_bits(addr), &(__dw_regs(dw)->addr_msb));
dev_dbg(dev, "xData: target address = 0x%.16llx\n", addr);
dev_dbg(dev, "xData: wr_len = %zu, rd_len = %zu\n",
dw->max_wr_len * 4, dw->max_rd_len * 4);
/* Saving data structure reference */
pci_set_drvdata(pdev, dw);
/* Register misc device */
err = misc_register(&dw->misc_dev);
if (err) {
dev_err(dev, "xData: failed to register device\n");
goto err_kfree_name;
}
return 0;
err_kfree_name:
kfree(dw->misc_dev.name);
err_ida_remove:
ida_free(&xdata_ida, id);
return err;
}
static void dw_xdata_pcie_remove(struct pci_dev *pdev)
{
struct dw_xdata *dw = pci_get_drvdata(pdev);
int id;
if (sscanf(dw->misc_dev.name, DW_XDATA_DRIVER_NAME ".%d", &id) != 1)
return;
if (id < 0)
return;
dw_xdata_stop(dw);
misc_deregister(&dw->misc_dev);
kfree(dw->misc_dev.name);
ida_free(&xdata_ida, id);
}
static const struct pci_device_id dw_xdata_pcie_id_table[] = {
{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
{ }
};
MODULE_DEVICE_TABLE(pci, dw_xdata_pcie_id_table);
static struct pci_driver dw_xdata_pcie_driver = {
.name = DW_XDATA_DRIVER_NAME,
.id_table = dw_xdata_pcie_id_table,
.probe = dw_xdata_pcie_probe,
.remove = dw_xdata_pcie_remove,
};
module_pci_driver(dw_xdata_pcie_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare xData PCIe driver");
MODULE_AUTHOR("Gustavo Pimentel <gustavo.pimentel@synopsys.com>");