https://github.com/torvalds/linux
Tip revision: 4a10c2ac2f368583138b774ca41fac4207911983 authored by Linus Torvalds on 23 September 2013, 22:41:09 UTC
Linux 3.12-rc2
Linux 3.12-rc2
Tip revision: 4a10c2a
mei_dev.h
/*
*
* Intel Management Engine Interface (Intel MEI) Linux driver
* Copyright (c) 2003-2012, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#ifndef _MEI_DEV_H_
#define _MEI_DEV_H_
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/poll.h>
#include <linux/mei.h>
#include <linux/mei_cl_bus.h>
#include "hw.h"
#include "hw-me-regs.h"
#include "hbm.h"
/*
* watch dog definition
*/
#define MEI_WD_HDR_SIZE 4
#define MEI_WD_STOP_MSG_SIZE MEI_WD_HDR_SIZE
#define MEI_WD_START_MSG_SIZE (MEI_WD_HDR_SIZE + 16)
#define MEI_WD_DEFAULT_TIMEOUT 120 /* seconds */
#define MEI_WD_MIN_TIMEOUT 120 /* seconds */
#define MEI_WD_MAX_TIMEOUT 65535 /* seconds */
#define MEI_WD_STOP_TIMEOUT 10 /* msecs */
#define MEI_WD_STATE_INDEPENDENCE_MSG_SENT (1 << 0)
#define MEI_RD_MSG_BUF_SIZE (128 * sizeof(u32))
/*
* AMTHI Client UUID
*/
extern const uuid_le mei_amthif_guid;
/*
* Watchdog Client UUID
*/
extern const uuid_le mei_wd_guid;
/*
* Number of Maximum MEI Clients
*/
#define MEI_CLIENTS_MAX 256
/*
* Number of File descriptors/handles
* that can be opened to the driver.
*
* Limit to 255: 256 Total Clients
* minus internal client for MEI Bus Messags
*/
#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)
/*
* Internal Clients Number
*/
#define MEI_HOST_CLIENT_ID_ANY (-1)
#define MEI_HBM_HOST_CLIENT_ID 0 /* not used, just for documentation */
#define MEI_WD_HOST_CLIENT_ID 1
#define MEI_IAMTHIF_HOST_CLIENT_ID 2
/* File state */
enum file_state {
MEI_FILE_INITIALIZING = 0,
MEI_FILE_CONNECTING,
MEI_FILE_CONNECTED,
MEI_FILE_DISCONNECTING,
MEI_FILE_DISCONNECTED
};
/* MEI device states */
enum mei_dev_state {
MEI_DEV_INITIALIZING = 0,
MEI_DEV_INIT_CLIENTS,
MEI_DEV_ENABLED,
MEI_DEV_RESETTING,
MEI_DEV_DISABLED,
MEI_DEV_POWER_DOWN,
MEI_DEV_POWER_UP
};
const char *mei_dev_state_str(int state);
enum iamthif_states {
MEI_IAMTHIF_IDLE,
MEI_IAMTHIF_WRITING,
MEI_IAMTHIF_FLOW_CONTROL,
MEI_IAMTHIF_READING,
MEI_IAMTHIF_READ_COMPLETE
};
enum mei_file_transaction_states {
MEI_IDLE,
MEI_WRITING,
MEI_WRITE_COMPLETE,
MEI_FLOW_CONTROL,
MEI_READING,
MEI_READ_COMPLETE
};
enum mei_wd_states {
MEI_WD_IDLE,
MEI_WD_RUNNING,
MEI_WD_STOPPING,
};
/**
* enum mei_cb_file_ops - file operation associated with the callback
* @MEI_FOP_READ - read
* @MEI_FOP_WRITE - write
* @MEI_FOP_IOCTL - ioctl
* @MEI_FOP_OPEN - open
* @MEI_FOP_CLOSE - close
*/
enum mei_cb_file_ops {
MEI_FOP_READ = 0,
MEI_FOP_WRITE,
MEI_FOP_IOCTL,
MEI_FOP_OPEN,
MEI_FOP_CLOSE
};
/*
* Intel MEI message data struct
*/
struct mei_msg_data {
u32 size;
unsigned char *data;
};
/**
* struct mei_me_client - representation of me (fw) client
*
* @props - client properties
* @client_id - me client id
* @mei_flow_ctrl_creds - flow control credits
*/
struct mei_me_client {
struct mei_client_properties props;
u8 client_id;
u8 mei_flow_ctrl_creds;
};
struct mei_cl;
/**
* struct mei_cl_cb - file operation callback structure
*
* @cl - file client who is running this operation
* @fop_type - file operation type
*/
struct mei_cl_cb {
struct list_head list;
struct mei_cl *cl;
enum mei_cb_file_ops fop_type;
struct mei_msg_data request_buffer;
struct mei_msg_data response_buffer;
unsigned long buf_idx;
unsigned long read_time;
struct file *file_object;
};
/* MEI client instance carried as file->pirvate_data*/
struct mei_cl {
struct list_head link;
struct mei_device *dev;
enum file_state state;
wait_queue_head_t tx_wait;
wait_queue_head_t rx_wait;
wait_queue_head_t wait;
int status;
/* ID of client connected */
u8 host_client_id;
u8 me_client_id;
u8 mei_flow_ctrl_creds;
u8 timer_count;
enum mei_file_transaction_states reading_state;
enum mei_file_transaction_states writing_state;
struct mei_cl_cb *read_cb;
/* MEI CL bus data */
struct mei_cl_device *device;
struct list_head device_link;
uuid_le device_uuid;
};
/** struct mei_hw_ops
*
* @host_is_ready - query for host readiness
* @hw_is_ready - query if hw is ready
* @hw_reset - reset hw
* @hw_start - start hw after reset
* @hw_config - configure hw
* @intr_clear - clear pending interrupts
* @intr_enable - enable interrupts
* @intr_disable - disable interrupts
* @hbuf_free_slots - query for write buffer empty slots
* @hbuf_is_ready - query if write buffer is empty
* @hbuf_max_len - query for write buffer max len
* @write - write a message to FW
* @rdbuf_full_slots - query how many slots are filled
* @read_hdr - get first 4 bytes (header)
* @read - read a buffer from the FW
*/
struct mei_hw_ops {
bool (*host_is_ready) (struct mei_device *dev);
bool (*hw_is_ready) (struct mei_device *dev);
int (*hw_reset) (struct mei_device *dev, bool enable);
int (*hw_start) (struct mei_device *dev);
void (*hw_config) (struct mei_device *dev);
void (*intr_clear) (struct mei_device *dev);
void (*intr_enable) (struct mei_device *dev);
void (*intr_disable) (struct mei_device *dev);
int (*hbuf_free_slots) (struct mei_device *dev);
bool (*hbuf_is_ready) (struct mei_device *dev);
size_t (*hbuf_max_len) (const struct mei_device *dev);
int (*write)(struct mei_device *dev,
struct mei_msg_hdr *hdr,
unsigned char *buf);
int (*rdbuf_full_slots)(struct mei_device *dev);
u32 (*read_hdr)(const struct mei_device *dev);
int (*read) (struct mei_device *dev,
unsigned char *buf, unsigned long len);
};
/* MEI bus API*/
/**
* struct mei_cl_ops - MEI CL device ops
* This structure allows ME host clients to implement technology
* specific operations.
*
* @enable: Enable an MEI CL device. Some devices require specific
* HECI commands to initialize completely.
* @disable: Disable an MEI CL device.
* @send: Tx hook for the device. This allows ME host clients to trap
* the device driver buffers before actually physically
* pushing it to the ME.
* @recv: Rx hook for the device. This allows ME host clients to trap the
* ME buffers before forwarding them to the device driver.
*/
struct mei_cl_ops {
int (*enable)(struct mei_cl_device *device);
int (*disable)(struct mei_cl_device *device);
int (*send)(struct mei_cl_device *device, u8 *buf, size_t length);
int (*recv)(struct mei_cl_device *device, u8 *buf, size_t length);
};
struct mei_cl_device *mei_cl_add_device(struct mei_device *dev,
uuid_le uuid, char *name,
struct mei_cl_ops *ops);
void mei_cl_remove_device(struct mei_cl_device *device);
int __mei_cl_async_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length);
void mei_cl_bus_rx_event(struct mei_cl *cl);
int mei_cl_bus_init(void);
void mei_cl_bus_exit(void);
/**
* struct mei_cl_device - MEI device handle
* An mei_cl_device pointer is returned from mei_add_device()
* and links MEI bus clients to their actual ME host client pointer.
* Drivers for MEI devices will get an mei_cl_device pointer
* when being probed and shall use it for doing ME bus I/O.
*
* @dev: linux driver model device pointer
* @uuid: me client uuid
* @cl: mei client
* @ops: ME transport ops
* @event_cb: Drivers register this callback to get asynchronous ME
* events (e.g. Rx buffer pending) notifications.
* @events: Events bitmask sent to the driver.
* @priv_data: client private data
*/
struct mei_cl_device {
struct device dev;
struct mei_cl *cl;
const struct mei_cl_ops *ops;
struct work_struct event_work;
mei_cl_event_cb_t event_cb;
void *event_context;
unsigned long events;
void *priv_data;
};
/**
* struct mei_device - MEI private device struct
* @hbm_state - state of host bus message protocol
* @mem_addr - mem mapped base register address
* @hbuf_depth - depth of hardware host/write buffer is slots
* @hbuf_is_ready - query if the host host/write buffer is ready
* @wr_msg - the buffer for hbm control messages
* @wr_ext_msg - the buffer for hbm control responses (set in read cycle)
*/
struct mei_device {
struct pci_dev *pdev; /* pointer to pci device struct */
/*
* lists of queues
*/
/* array of pointers to aio lists */
struct mei_cl_cb read_list; /* driver read queue */
struct mei_cl_cb write_list; /* driver write queue */
struct mei_cl_cb write_waiting_list; /* write waiting queue */
struct mei_cl_cb ctrl_wr_list; /* managed write IOCTL list */
struct mei_cl_cb ctrl_rd_list; /* managed read IOCTL list */
/*
* list of files
*/
struct list_head file_list;
long open_handle_count;
/*
* lock for the device
*/
struct mutex device_lock; /* device lock */
struct delayed_work timer_work; /* MEI timer delayed work (timeouts) */
bool recvd_hw_ready;
/*
* waiting queue for receive message from FW
*/
wait_queue_head_t wait_hw_ready;
wait_queue_head_t wait_recvd_msg;
wait_queue_head_t wait_stop_wd;
/*
* mei device states
*/
enum mei_dev_state dev_state;
enum mei_hbm_state hbm_state;
u16 init_clients_timer;
unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE]; /* control messages */
u32 rd_msg_hdr;
/* write buffer */
u8 hbuf_depth;
bool hbuf_is_ready;
/* used for control messages */
struct {
struct mei_msg_hdr hdr;
unsigned char data[128];
} wr_msg;
struct {
struct mei_msg_hdr hdr;
unsigned char data[4]; /* All HBM messages are 4 bytes */
} wr_ext_msg; /* for control responses */
struct hbm_version version;
struct mei_me_client *me_clients; /* Note: memory has to be allocated */
DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX);
DECLARE_BITMAP(host_clients_map, MEI_CLIENTS_MAX);
u8 me_clients_num;
u8 me_client_presentation_num;
u8 me_client_index;
struct mei_cl wd_cl;
enum mei_wd_states wd_state;
bool wd_pending;
u16 wd_timeout;
unsigned char wd_data[MEI_WD_START_MSG_SIZE];
/* amthif list for cmd waiting */
struct mei_cl_cb amthif_cmd_list;
/* driver managed amthif list for reading completed amthif cmd data */
struct mei_cl_cb amthif_rd_complete_list;
struct file *iamthif_file_object;
struct mei_cl iamthif_cl;
struct mei_cl_cb *iamthif_current_cb;
int iamthif_mtu;
unsigned long iamthif_timer;
u32 iamthif_stall_timer;
unsigned char *iamthif_msg_buf; /* Note: memory has to be allocated */
u32 iamthif_msg_buf_size;
u32 iamthif_msg_buf_index;
enum iamthif_states iamthif_state;
bool iamthif_flow_control_pending;
bool iamthif_ioctl;
bool iamthif_canceled;
struct work_struct init_work;
/* List of bus devices */
struct list_head device_list;
#if IS_ENABLED(CONFIG_DEBUG_FS)
struct dentry *dbgfs_dir;
#endif /* CONFIG_DEBUG_FS */
const struct mei_hw_ops *ops;
char hw[0] __aligned(sizeof(void *));
};
static inline unsigned long mei_secs_to_jiffies(unsigned long sec)
{
return msecs_to_jiffies(sec * MSEC_PER_SEC);
}
/**
* mei_data2slots - get slots - number of (dwords) from a message length
* + size of the mei header
* @length - size of the messages in bytes
* returns - number of slots
*/
static inline u32 mei_data2slots(size_t length)
{
return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4);
}
/*
* mei init function prototypes
*/
void mei_device_init(struct mei_device *dev);
void mei_reset(struct mei_device *dev, int interrupts);
int mei_start(struct mei_device *dev);
void mei_stop(struct mei_device *dev);
/*
* MEI interrupt functions prototype
*/
void mei_timer(struct work_struct *work);
int mei_irq_read_handler(struct mei_device *dev,
struct mei_cl_cb *cmpl_list, s32 *slots);
int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list);
void mei_irq_compl_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list);
/*
* AMTHIF - AMT Host Interface Functions
*/
void mei_amthif_reset_params(struct mei_device *dev);
int mei_amthif_host_init(struct mei_device *dev);
int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *priv_cb);
int mei_amthif_read(struct mei_device *dev, struct file *file,
char __user *ubuf, size_t length, loff_t *offset);
unsigned int mei_amthif_poll(struct mei_device *dev,
struct file *file, poll_table *wait);
int mei_amthif_release(struct mei_device *dev, struct file *file);
struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
struct file *file);
void mei_amthif_run_next_cmd(struct mei_device *dev);
int mei_amthif_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
s32 *slots, struct mei_cl_cb *cmpl_list);
void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb);
int mei_amthif_irq_read_msg(struct mei_device *dev,
struct mei_msg_hdr *mei_hdr,
struct mei_cl_cb *complete_list);
int mei_amthif_irq_read(struct mei_device *dev, s32 *slots);
/*
* NFC functions
*/
int mei_nfc_host_init(struct mei_device *dev);
void mei_nfc_host_exit(void);
/*
* NFC Client UUID
*/
extern const uuid_le mei_nfc_guid;
int mei_wd_send(struct mei_device *dev);
int mei_wd_stop(struct mei_device *dev);
int mei_wd_host_init(struct mei_device *dev);
/*
* mei_watchdog_register - Registering watchdog interface
* once we got connection to the WD Client
* @dev - mei device
*/
void mei_watchdog_register(struct mei_device *dev);
/*
* mei_watchdog_unregister - Unregistering watchdog interface
* @dev - mei device
*/
void mei_watchdog_unregister(struct mei_device *dev);
/*
* Register Access Function
*/
static inline void mei_hw_config(struct mei_device *dev)
{
dev->ops->hw_config(dev);
}
static inline int mei_hw_reset(struct mei_device *dev, bool enable)
{
return dev->ops->hw_reset(dev, enable);
}
static inline int mei_hw_start(struct mei_device *dev)
{
return dev->ops->hw_start(dev);
}
static inline void mei_clear_interrupts(struct mei_device *dev)
{
dev->ops->intr_clear(dev);
}
static inline void mei_enable_interrupts(struct mei_device *dev)
{
dev->ops->intr_enable(dev);
}
static inline void mei_disable_interrupts(struct mei_device *dev)
{
dev->ops->intr_disable(dev);
}
static inline bool mei_host_is_ready(struct mei_device *dev)
{
return dev->ops->host_is_ready(dev);
}
static inline bool mei_hw_is_ready(struct mei_device *dev)
{
return dev->ops->hw_is_ready(dev);
}
static inline bool mei_hbuf_is_ready(struct mei_device *dev)
{
return dev->ops->hbuf_is_ready(dev);
}
static inline int mei_hbuf_empty_slots(struct mei_device *dev)
{
return dev->ops->hbuf_free_slots(dev);
}
static inline size_t mei_hbuf_max_len(const struct mei_device *dev)
{
return dev->ops->hbuf_max_len(dev);
}
static inline int mei_write_message(struct mei_device *dev,
struct mei_msg_hdr *hdr,
unsigned char *buf)
{
return dev->ops->write(dev, hdr, buf);
}
static inline u32 mei_read_hdr(const struct mei_device *dev)
{
return dev->ops->read_hdr(dev);
}
static inline void mei_read_slots(struct mei_device *dev,
unsigned char *buf, unsigned long len)
{
dev->ops->read(dev, buf, len);
}
static inline int mei_count_full_read_slots(struct mei_device *dev)
{
return dev->ops->rdbuf_full_slots(dev);
}
#if IS_ENABLED(CONFIG_DEBUG_FS)
int mei_dbgfs_register(struct mei_device *dev, const char *name);
void mei_dbgfs_deregister(struct mei_device *dev);
#else
static inline int mei_dbgfs_register(struct mei_device *dev, const char *name)
{
return 0;
}
static inline void mei_dbgfs_deregister(struct mei_device *dev) {}
#endif /* CONFIG_DEBUG_FS */
int mei_register(struct mei_device *dev);
void mei_deregister(struct mei_device *dev);
#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d comp=%1d"
#define MEI_HDR_PRM(hdr) \
(hdr)->host_addr, (hdr)->me_addr, \
(hdr)->length, (hdr)->msg_complete
#endif