https://github.com/torvalds/linux
Tip revision: 136057256686de39cc3a07c2e39ef6bc43003ff6 authored by Linus Torvalds on 21 November 2021, 21:47:39 UTC
Linux 5.16-rc2
Linux 5.16-rc2
Tip revision: 1360572
Makefile
# SPDX-License-Identifier: GPL-2.0
obj-y += testcases.dtb.o
obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_0.dtb.o \
overlay_1.dtb.o \
overlay_2.dtb.o \
overlay_3.dtb.o \
overlay_4.dtb.o \
overlay_5.dtb.o \
overlay_6.dtb.o \
overlay_7.dtb.o \
overlay_8.dtb.o \
overlay_9.dtb.o \
overlay_10.dtb.o \
overlay_11.dtb.o \
overlay_12.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
overlay_bad_add_dup_node.dtb.o \
overlay_bad_add_dup_prop.dtb.o \
overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \
overlay_base.dtb.o \
overlay_gpio_01.dtb.o \
overlay_gpio_02a.dtb.o \
overlay_gpio_02b.dtb.o \
overlay_gpio_03.dtb.o \
overlay_gpio_04a.dtb.o \
overlay_gpio_04b.dtb.o
# enable creation of __symbols__ node
DTC_FLAGS_overlay += -@
DTC_FLAGS_overlay_bad_phandle += -@
DTC_FLAGS_overlay_bad_symbol += -@
DTC_FLAGS_overlay_base += -@
DTC_FLAGS_testcases += -@
# suppress warnings about intentional errors
DTC_FLAGS_testcases += -Wno-interrupts_property \
-Wno-node_name_vs_property_name \
-Wno-interrupt_map
# Apply overlays statically with fdtoverlay. This is a build time test that
# the overlays can be applied successfully by fdtoverlay. This does not
# guarantee that the overlays can be applied successfully at run time by
# unittest, but it provides a bit of build time test coverage for those
# who do not execute unittest.
#
# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
# create static_test_1.dtb and static_test_2.dtb. If fdtoverlay detects an
# error than the kernel build will fail. static_test_1.dtb and
# static_test_2.dtb are not consumed by unittest.
#
# Some unittest overlays deliberately contain errors that unittest checks for.
# These overlays will cause fdtoverlay to fail, and are thus not included
# in the static test:
# overlay_bad_add_dup_node.dtbo \
# overlay_bad_add_dup_prop.dtbo \
# overlay_bad_phandle.dtbo \
# overlay_bad_symbol.dtbo \
apply_static_overlay_1 := overlay_0.dtbo \
overlay_1.dtbo \
overlay_2.dtbo \
overlay_3.dtbo \
overlay_4.dtbo \
overlay_5.dtbo \
overlay_6.dtbo \
overlay_7.dtbo \
overlay_8.dtbo \
overlay_9.dtbo \
overlay_10.dtbo \
overlay_11.dtbo \
overlay_12.dtbo \
overlay_13.dtbo \
overlay_15.dtbo \
overlay_gpio_01.dtbo \
overlay_gpio_02a.dtbo \
overlay_gpio_02b.dtbo \
overlay_gpio_03.dtbo \
overlay_gpio_04a.dtbo \
overlay_gpio_04b.dtbo
apply_static_overlay_2 := overlay.dtbo
DTC_FLAGS_static_base_1 += -Wno-interrupts_property \
-Wno-node_name_vs_property_name \
-Wno-interrupt_map
static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb