https://github.com/torvalds/linux
Tip revision: a38fd8748464831584a19438cbb3082b5a2dab15 authored by Linus Torvalds on 06 March 2021, 01:33:41 UTC
Linux 5.12-rc2
Linux 5.12-rc2
Tip revision: a38fd87
atc260x-regulator.c
// SPDX-License-Identifier: GPL-2.0+
//
// Regulator driver for ATC260x PMICs
//
// Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
// Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
#include <linux/mfd/atc260x/core.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
struct atc260x_regulator_data {
int voltage_time_dcdc;
int voltage_time_ldo;
};
static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
};
static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
};
static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
};
static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
};
static const unsigned int atc260x_ldo_voltage_range_sel[] = {
0x0, 0x1,
};
static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
if (new_selector > old_selector)
return data->voltage_time_dcdc;
return 0;
}
static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
if (new_selector > old_selector)
return data->voltage_time_ldo;
return 0;
}
static const struct regulator_ops atc260x_dcdc_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_ldo_bypass_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
.set_bypass = regulator_set_bypass_regmap,
.get_bypass = regulator_get_bypass_regmap,
};
static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
.set_bypass = regulator_set_bypass_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
static const struct regulator_ops atc260x_dcdc_range_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_ldo_range_pick_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_pickable_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_dcdc_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_ldo_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
};
static const struct regulator_ops atc260x_no_ops = {
};
/*
* Note LDO8 is not documented in datasheet (v2.4), but supported
* in the vendor's driver implementation (xapp-le-kernel).
*/
enum atc2603c_reg_ids {
ATC2603C_ID_DCDC1,
ATC2603C_ID_DCDC2,
ATC2603C_ID_DCDC3,
ATC2603C_ID_LDO1,
ATC2603C_ID_LDO2,
ATC2603C_ID_LDO3,
ATC2603C_ID_LDO5,
ATC2603C_ID_LDO6,
ATC2603C_ID_LDO7,
ATC2603C_ID_LDO8,
ATC2603C_ID_LDO11,
ATC2603C_ID_LDO12,
ATC2603C_ID_SWITCHLDO1,
ATC2603C_ID_MAX,
};
#define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
.name = "DCDC"#num, \
.supply_name = "dcdc"#num, \
.of_match = of_match_ptr("dcdc"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_DCDC##num, \
.ops = &atc260x_dcdc_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = n_volt, \
.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
.enable_mask = BIT(15), \
.enable_time = 800, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
.name = "DCDC"#num, \
.supply_name = "dcdc"#num, \
.of_match = of_match_ptr("dcdc"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_DCDC##num, \
.ops = &atc260x_dcdc_range_ops, \
.type = REGULATOR_VOLTAGE, \
.n_voltages = 16, \
.linear_ranges = atc2603c_dcdc_voltage_ranges, \
.n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
.enable_mask = BIT(15), \
.enable_time = 800, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
.name = "DCDC"#num, \
.supply_name = "dcdc"#num, \
.of_match = of_match_ptr("dcdc"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_DCDC##num, \
.ops = &atc260x_dcdc_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = n_volt, \
.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_time = 800, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_LDO##num, \
.ops = &atc260x_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = n_volt, \
.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
.enable_mask = BIT(0), \
.enable_time = 2000, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_LDO##num, \
.ops = &atc260x_ldo_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = n_volt, \
.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_time = 2000, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_ldo_noops(num, vfixed) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_LDO##num, \
.ops = &atc260x_no_ops, \
.type = REGULATOR_VOLTAGE, \
.fixed_uV = vfixed, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
}
#define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
.name = "SWITCHLDO"#num, \
.supply_name = "switchldo"#num, \
.of_match = of_match_ptr("switchldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2603C_ID_SWITCHLDO##num, \
.ops = &atc260x_ldo_bypass_discharge_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = n_volt, \
.vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
.vsel_mask = GENMASK(vsel_h, vsel_l), \
.enable_reg = ATC2603C_PMU_SWITCH_CTL, \
.enable_mask = BIT(15), \
.enable_is_inverted = true, \
.enable_time = 2000, \
.bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
.bypass_mask = BIT(5), \
.active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
.active_discharge_mask = BIT(1), \
.owner = THIS_MODULE, \
}
static const struct regulator_desc atc2603c_reg[] = {
atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
atc2603c_reg_desc_dcdc_range(2, 12, 8),
atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
atc2603c_reg_desc_ldo_noops(12, 1800000),
atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
};
static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
enum atc2609a_reg_ids {
ATC2609A_ID_DCDC0,
ATC2609A_ID_DCDC1,
ATC2609A_ID_DCDC2,
ATC2609A_ID_DCDC3,
ATC2609A_ID_DCDC4,
ATC2609A_ID_LDO0,
ATC2609A_ID_LDO1,
ATC2609A_ID_LDO2,
ATC2609A_ID_LDO3,
ATC2609A_ID_LDO4,
ATC2609A_ID_LDO5,
ATC2609A_ID_LDO6,
ATC2609A_ID_LDO7,
ATC2609A_ID_LDO8,
ATC2609A_ID_LDO9,
ATC2609A_ID_MAX,
};
#define atc2609a_reg_desc_dcdc(num, en_bit) { \
.name = "DCDC"#num, \
.supply_name = "dcdc"#num, \
.of_match = of_match_ptr("dcdc"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_DCDC##num, \
.ops = &atc260x_dcdc_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = 600000, \
.uV_step = 6250, \
.n_voltages = 256, \
.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
.vsel_mask = GENMASK(15, 8), \
.enable_reg = ATC2609A_PMU_DC_OSC, \
.enable_mask = BIT(en_bit), \
.enable_time = 800, \
.owner = THIS_MODULE, \
}
#define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
.name = "DCDC"#num, \
.supply_name = "dcdc"#num, \
.of_match = of_match_ptr("dcdc"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_DCDC##num, \
.ops = &atc260x_dcdc_range_ops, \
.type = REGULATOR_VOLTAGE, \
.n_voltages = 233, \
.linear_ranges = atc2609a_dcdc_voltage_ranges, \
.n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
.vsel_mask = GENMASK(15, 8), \
.enable_reg = ATC2609A_PMU_DC_OSC, \
.enable_mask = BIT(en_bit), \
.enable_time = 800, \
.owner = THIS_MODULE, \
}
#define atc2609a_reg_desc_ldo(num) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_LDO##num, \
.ops = &atc260x_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = 700000, \
.uV_step = 100000, \
.n_voltages = 16, \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_mask = GENMASK(4, 1), \
.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.enable_mask = BIT(0), \
.enable_time = 2000, \
.owner = THIS_MODULE, \
}
#define atc2609a_reg_desc_ldo_bypass(num) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_LDO##num, \
.ops = &atc260x_ldo_bypass_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = 2300000, \
.uV_step = 100000, \
.n_voltages = 12, \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_mask = GENMASK(5, 2), \
.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.enable_mask = BIT(0), \
.enable_time = 2000, \
.bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.bypass_mask = BIT(1), \
.owner = THIS_MODULE, \
}
#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_LDO##num, \
.ops = &atc260x_ldo_range_pick_ops, \
.type = REGULATOR_VOLTAGE, \
.linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
.n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_mask = GENMASK(4, 1), \
.vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_range_mask = BIT(5), \
.linear_range_selectors = atc260x_ldo_voltage_range_sel, \
.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.enable_mask = BIT(0), \
.enable_time = 2000, \
.owner = THIS_MODULE, \
}
#define atc2609a_reg_desc_ldo_fixed(num) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
.regulators_node = of_match_ptr("regulators"), \
.id = ATC2609A_ID_LDO##num, \
.ops = &atc260x_ldo_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.min_uV = 2600000, \
.uV_step = 100000, \
.n_voltages = 8, \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
.vsel_mask = GENMASK(15, 13), \
.enable_time = 2000, \
.owner = THIS_MODULE, \
}
static const struct regulator_desc atc2609a_reg[] = {
atc2609a_reg_desc_dcdc(0, 4),
atc2609a_reg_desc_dcdc(1, 5),
atc2609a_reg_desc_dcdc(2, 6),
atc2609a_reg_desc_dcdc_range(3, 7),
atc2609a_reg_desc_dcdc(4, 8),
atc2609a_reg_desc_ldo_bypass(0),
atc2609a_reg_desc_ldo_bypass(1),
atc2609a_reg_desc_ldo_bypass(2),
atc2609a_reg_desc_ldo_range_pick(3, 0),
atc2609a_reg_desc_ldo_range_pick(4, 0),
atc2609a_reg_desc_ldo(5),
atc2609a_reg_desc_ldo_range_pick(6, 1),
atc2609a_reg_desc_ldo_range_pick(7, 0),
atc2609a_reg_desc_ldo_range_pick(8, 0),
atc2609a_reg_desc_ldo_fixed(9),
};
static int atc260x_regulator_probe(struct platform_device *pdev)
{
struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
struct device *dev = atc260x->dev;
struct atc260x_regulator_data *atc260x_data;
struct regulator_config config = {};
struct regulator_dev *atc260x_rdev;
const struct regulator_desc *regulators;
bool atc2603c_ver_b = false;
int i, nregulators;
atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
if (!atc260x_data)
return -ENOMEM;
atc260x_data->voltage_time_dcdc = 350;
atc260x_data->voltage_time_ldo = 800;
switch (atc260x->ic_type) {
case ATC2603C:
regulators = atc2603c_reg;
nregulators = ATC2603C_ID_MAX;
atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
break;
case ATC2609A:
atc260x_data->voltage_time_dcdc = 250;
regulators = atc2609a_reg;
nregulators = ATC2609A_ID_MAX;
break;
default:
dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
return -EINVAL;
}
config.dev = dev;
config.regmap = atc260x->regmap;
config.driver_data = atc260x_data;
/* Instantiate the regulators */
for (i = 0; i < nregulators; i++) {
if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
atc260x_rdev = devm_regulator_register(&pdev->dev,
&atc2603c_reg_dcdc2_ver_b,
&config);
else
atc260x_rdev = devm_regulator_register(&pdev->dev,
®ulators[i],
&config);
if (IS_ERR(atc260x_rdev)) {
dev_err(dev, "failed to register regulator: %d\n", i);
return PTR_ERR(atc260x_rdev);
}
}
return 0;
}
static struct platform_driver atc260x_regulator_driver = {
.probe = atc260x_regulator_probe,
.driver = {
.name = "atc260x-regulator",
},
};
module_platform_driver(atc260x_regulator_driver);
MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
MODULE_LICENSE("GPL");