https://github.com/torvalds/linux
Tip revision: d8dfad3876e4386666b759da3c833d62fb8b2267 authored by Linus Torvalds on 26 August 2013, 00:43:22 UTC
Linux 3.11-rc7
Linux 3.11-rc7
Tip revision: d8dfad3
usb_intf.c
/******************************************************************************
* usb_intf.c
*
* Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
* Linux device driver for RTL8192SU
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* Modifications for inclusion into the Linux staging tree are
* Copyright(c) 2010 Larry Finger. All rights reserved.
*
* Contact information:
* WLAN FAE <wlanfae@realtek.com>
* Larry Finger <Larry.Finger@lwfinger.net>
*
******************************************************************************/
#define _HCI_INTF_C_
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include "osdep_service.h"
#include "drv_types.h"
#include "recv_osdep.h"
#include "xmit_osdep.h"
#include "rtl8712_efuse.h"
#include "usb_ops.h"
#include "usb_osintf.h"
static struct usb_interface *pintf;
static int r871xu_drv_init(struct usb_interface *pusb_intf,
const struct usb_device_id *pdid);
static void r871xu_dev_remove(struct usb_interface *pusb_intf);
static struct usb_device_id rtl871x_usb_id_tbl[] = {
/* RTL8188SU */
/* Realtek */
{USB_DEVICE(0x0BDA, 0x8171)},
{USB_DEVICE(0x0bda, 0x8173)},
{USB_DEVICE(0x0bda, 0x8712)},
{USB_DEVICE(0x0bda, 0x8713)},
{USB_DEVICE(0x0bda, 0xC512)},
/* Abocom */
{USB_DEVICE(0x07B8, 0x8188)},
/* ASUS */
{USB_DEVICE(0x0B05, 0x1786)},
{USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
/* Belkin */
{USB_DEVICE(0x050D, 0x945A)},
/* ISY IWL - Belkin clone */
{USB_DEVICE(0x050D, 0x11F1)},
/* Corega */
{USB_DEVICE(0x07AA, 0x0047)},
/* D-Link */
{USB_DEVICE(0x2001, 0x3306)},
{USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */
/* Edimax */
{USB_DEVICE(0x7392, 0x7611)},
/* EnGenius */
{USB_DEVICE(0x1740, 0x9603)},
/* Hawking */
{USB_DEVICE(0x0E66, 0x0016)},
/* Hercules */
{USB_DEVICE(0x06F8, 0xE034)},
{USB_DEVICE(0x06F8, 0xE032)},
/* Logitec */
{USB_DEVICE(0x0789, 0x0167)},
/* PCI */
{USB_DEVICE(0x2019, 0xAB28)},
{USB_DEVICE(0x2019, 0xED16)},
/* Sitecom */
{USB_DEVICE(0x0DF6, 0x0057)},
{USB_DEVICE(0x0DF6, 0x0045)},
{USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
{USB_DEVICE(0x0DF6, 0x004B)},
{USB_DEVICE(0x0DF6, 0x005B)},
{USB_DEVICE(0x0DF6, 0x005D)},
{USB_DEVICE(0x0DF6, 0x0063)},
/* Sweex */
{USB_DEVICE(0x177F, 0x0154)},
/* Thinkware */
{USB_DEVICE(0x0BDA, 0x5077)},
/* Toshiba */
{USB_DEVICE(0x1690, 0x0752)},
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
{USB_DEVICE(0x25D4, 0x4CA1)},
{USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
{USB_DEVICE(0x0BDA, 0x8172)},
{USB_DEVICE(0x0BDA, 0x8192)},
/* Amigo */
{USB_DEVICE(0x0EB0, 0x9061)},
/* ASUS/EKB */
{USB_DEVICE(0x13D3, 0x3323)},
{USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */
{USB_DEVICE(0x13D3, 0x3342)},
/* ASUS/EKBLenovo */
{USB_DEVICE(0x13D3, 0x3333)},
{USB_DEVICE(0x13D3, 0x3334)},
{USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */
{USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */
/* ASUS/Media BOX */
{USB_DEVICE(0x13D3, 0x3309)},
/* Belkin */
{USB_DEVICE(0x050D, 0x815F)},
/* D-Link */
{USB_DEVICE(0x07D1, 0x3302)},
{USB_DEVICE(0x07D1, 0x3300)},
{USB_DEVICE(0x07D1, 0x3303)},
/* Edimax */
{USB_DEVICE(0x7392, 0x7612)},
/* EnGenius */
{USB_DEVICE(0x1740, 0x9605)},
/* Guillemot */
{USB_DEVICE(0x06F8, 0xE031)},
/* Hawking */
{USB_DEVICE(0x0E66, 0x0015)},
/* Mediao */
{USB_DEVICE(0x13D3, 0x3306)},
/* PCI */
{USB_DEVICE(0x2019, 0xED18)},
{USB_DEVICE(0x2019, 0x4901)},
/* Sitecom */
{USB_DEVICE(0x0DF6, 0x0058)},
{USB_DEVICE(0x0DF6, 0x0049)},
{USB_DEVICE(0x0DF6, 0x004C)},
{USB_DEVICE(0x0DF6, 0x0064)},
/* Skyworth */
{USB_DEVICE(0x14b2, 0x3300)},
{USB_DEVICE(0x14b2, 0x3301)},
{USB_DEVICE(0x14B2, 0x3302)},
/* - */
{USB_DEVICE(0x04F2, 0xAFF2)},
{USB_DEVICE(0x04F2, 0xAFF5)},
{USB_DEVICE(0x04F2, 0xAFF6)},
{USB_DEVICE(0x13D3, 0x3339)},
{USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */
{USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */
{USB_DEVICE(0x13D3, 0x3310)},
{USB_DEVICE(0x13D3, 0x3325)},
/* RTL8192SU */
/* Realtek */
{USB_DEVICE(0x0BDA, 0x8174)},
/* Belkin */
{USB_DEVICE(0x050D, 0x845A)},
/* Corega */
{USB_DEVICE(0x07AA, 0x0051)},
/* Edimax */
{USB_DEVICE(0x7392, 0x7622)},
/* NEC */
{USB_DEVICE(0x0409, 0x02B6)},
{}
};
MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl);
static struct specific_device_id specific_device_id_tbl[] = {
{.idVendor = 0x0b05, .idProduct = 0x1791,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x0df6, .idProduct = 0x0059,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13d3, .idProduct = 0x3306,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13D3, .idProduct = 0x3311,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13d3, .idProduct = 0x3335,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13d3, .idProduct = 0x3336,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13d3, .idProduct = 0x3340,
.flags = SPEC_DEV_ID_DISABLE_HT},
{.idVendor = 0x13d3, .idProduct = 0x3341,
.flags = SPEC_DEV_ID_DISABLE_HT},
{}
};
struct drv_priv {
struct usb_driver r871xu_drv;
int drv_registered;
};
#ifdef CONFIG_PM
static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state)
{
struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
netdev_info(pnetdev, "Suspending...\n");
if (!pnetdev || !netif_running(pnetdev)) {
netdev_info(pnetdev, "Unable to suspend\n");
return 0;
}
if (pnetdev->netdev_ops->ndo_stop)
pnetdev->netdev_ops->ndo_stop(pnetdev);
mdelay(10);
netif_device_detach(pnetdev);
return 0;
}
static int r871x_resume(struct usb_interface *pusb_intf)
{
struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
netdev_info(pnetdev, "Resuming...\n");
if (!pnetdev || !netif_running(pnetdev)) {
netdev_info(pnetdev, "Unable to resume\n");
return 0;
}
netif_device_attach(pnetdev);
if (pnetdev->netdev_ops->ndo_open)
pnetdev->netdev_ops->ndo_open(pnetdev);
return 0;
}
static int r871x_reset_resume(struct usb_interface *pusb_intf)
{
/* dummy routine */
return 0;
}
#endif
static struct drv_priv drvpriv = {
.r871xu_drv.name = "r8712u",
.r871xu_drv.id_table = rtl871x_usb_id_tbl,
.r871xu_drv.probe = r871xu_drv_init,
.r871xu_drv.disconnect = r871xu_dev_remove,
#ifdef CONFIG_PM
.r871xu_drv.suspend = r871x_suspend,
.r871xu_drv.resume = r871x_resume,
.r871xu_drv.reset_resume = r871x_reset_resume,
#endif
};
static uint r8712_usb_dvobj_init(struct _adapter *padapter)
{
uint status = _SUCCESS;
struct usb_device_descriptor *pdev_desc;
struct usb_host_config *phost_conf;
struct usb_config_descriptor *pconf_desc;
struct usb_host_interface *phost_iface;
struct usb_interface_descriptor *piface_desc;
struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
struct usb_device *pusbd = pdvobjpriv->pusbdev;
pdvobjpriv->padapter = padapter;
padapter->EepromAddressSize = 6;
pdev_desc = &pusbd->descriptor;
phost_conf = pusbd->actconfig;
pconf_desc = &phost_conf->desc;
phost_iface = &pintf->altsetting[0];
piface_desc = &phost_iface->desc;
pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
if (pusbd->speed == USB_SPEED_HIGH) {
pdvobjpriv->ishighspeed = true;
dev_info(&pusbd->dev, "r8712u: USB_SPEED_HIGH with %d endpoints\n",
pdvobjpriv->nr_endpoint);
} else {
pdvobjpriv->ishighspeed = false;
dev_info(&pusbd->dev, "r8712u: USB_SPEED_LOW with %d endpoints\n",
pdvobjpriv->nr_endpoint);
}
if ((r8712_alloc_io_queue(padapter)) == _FAIL)
status = _FAIL;
return status;
}
static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
{
}
void rtl871x_intf_stop(struct _adapter *padapter)
{
/*disable_hw_interrupt*/
if (padapter->bSurpriseRemoved == false) {
/*device still exists, so driver can do i/o operation
* TODO: */
}
/* cancel in irp */
if (padapter->dvobjpriv.inirp_deinit != NULL)
padapter->dvobjpriv.inirp_deinit(padapter);
/* cancel out irp */
r8712_usb_write_port_cancel(padapter);
/* TODO:cancel other irps */
}
void r871x_dev_unload(struct _adapter *padapter)
{
if (padapter->bup == true) {
/*s1.*/
padapter->bDriverStopped = true;
/*s3.*/
rtl871x_intf_stop(padapter);
/*s4.*/
r8712_stop_drv_threads(padapter);
/*s5.*/
if (padapter->bSurpriseRemoved == false) {
padapter->hw_init_completed = false;
rtl8712_hal_deinit(padapter);
}
/*s6.*/
if (padapter->dvobj_deinit)
padapter->dvobj_deinit(padapter);
padapter->bup = false;
}
}
static void disable_ht_for_spec_devid(const struct usb_device_id *pdid,
struct _adapter *padapter)
{
u16 vid, pid;
u32 flags;
int i;
int num = sizeof(specific_device_id_tbl) /
sizeof(struct specific_device_id);
for (i = 0; i < num; i++) {
vid = specific_device_id_tbl[i].idVendor;
pid = specific_device_id_tbl[i].idProduct;
flags = specific_device_id_tbl[i].flags;
if ((pdid->idVendor == vid) && (pdid->idProduct == pid) &&
(flags&SPEC_DEV_ID_DISABLE_HT)) {
padapter->registrypriv.ht_enable = 0;
padapter->registrypriv.cbw40_enable = 0;
padapter->registrypriv.ampdu_enable = 0;
}
}
}
static u8 key_2char2num(u8 hch, u8 lch)
{
return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
}
/*
* drv_init() - a device potentially for us
*
* notes: drv_init() is called when the bus driver has located a card for us
* to support. We accept the new device by returning 0.
*/
static int r871xu_drv_init(struct usb_interface *pusb_intf,
const struct usb_device_id *pdid)
{
uint status;
struct _adapter *padapter = NULL;
struct dvobj_priv *pdvobjpriv;
struct net_device *pnetdev;
struct usb_device *udev;
printk(KERN_INFO "r8712u: Staging version\n");
/* In this probe function, O.S. will provide the usb interface pointer
* to driver. We have to increase the reference count of the usb device
* structure by using the usb_get_dev function.
*/
udev = interface_to_usbdev(pusb_intf);
usb_get_dev(udev);
pintf = pusb_intf;
/* step 1. */
pnetdev = r8712_init_netdev();
if (!pnetdev)
goto error;
padapter = netdev_priv(pnetdev);
disable_ht_for_spec_devid(pdid, padapter);
pdvobjpriv = &padapter->dvobjpriv;
pdvobjpriv->padapter = padapter;
padapter->dvobjpriv.pusbdev = udev;
padapter->pusb_intf = pusb_intf;
usb_set_intfdata(pusb_intf, pnetdev);
SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
/* step 2. */
padapter->dvobj_init = &r8712_usb_dvobj_init;
padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
/* step 3.
* initialize the dvobj_priv
*/
if (padapter->dvobj_init == NULL)
goto error;
else {
status = padapter->dvobj_init(padapter);
if (status != _SUCCESS)
goto error;
}
/* step 4. */
status = r8712_init_drv_sw(padapter);
if (status == _FAIL)
goto error;
/* step 5. read efuse/eeprom data and get mac_addr */
{
int i, offset;
u8 mac[6];
u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/
/* To check system boot selection.*/
dev_info(&udev->dev, "r8712u: Boot from %s: Autoload %s\n",
(tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
(tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
/* To check autoload success or not.*/
if (tmpU1b & _EEPROM_EN) {
AutoloadFail = true;
/* The following operations prevent Efuse leakage by
* turning on 2.5V.
*/
tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
msleep(20);
r8712_write8(padapter, EFUSE_TEST + 3,
(tmpU1b & (~BIT(7))));
/* Retrieve Chip version.
* Recognize IC version by Reg0x4 BIT15.
*/
tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
0x1F);
if (tmpU1b == 0x3)
padapter->registrypriv.chip_version =
RTL8712_3rdCUT;
else
padapter->registrypriv.chip_version =
(tmpU1b >> 1) + 1;
switch (padapter->registrypriv.chip_version) {
case RTL8712_1stCUT:
case RTL8712_2ndCUT:
case RTL8712_3rdCUT:
break;
default:
padapter->registrypriv.chip_version =
RTL8712_2ndCUT;
break;
}
for (i = 0, offset = 0; i < 128; i += 8, offset++)
r8712_efuse_pg_packet_read(padapter, offset,
&pdata[i]);
if (r8712_initmac) {
/* Users specify the mac address */
int jj, kk;
for (jj = 0, kk = 0; jj < ETH_ALEN;
jj++, kk += 3)
mac[jj] =
key_2char2num(r8712_initmac[kk],
r8712_initmac[kk + 1]);
} else {
/* Use the mac address stored in the Efuse
* offset = 0x12 for usb in efuse
*/
memcpy(mac, &pdata[0x12], ETH_ALEN);
}
eeprom_CustomerID = pdata[0x52];
switch (eeprom_CustomerID) {
case EEPROM_CID_ALPHA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_ALPHA;
break;
case EEPROM_CID_CAMEO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO;
break;
case EEPROM_CID_SITECOM:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sitecom;
break;
case EEPROM_CID_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_COREGA;
break;
case EEPROM_CID_Senao:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Senao;
break;
case EEPROM_CID_EDIMAX_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Edimax_Belkin;
break;
case EEPROM_CID_SERCOMM_BELKIN:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Sercomm_Belkin;
break;
case EEPROM_CID_WNC_COREGA:
padapter->eeprompriv.CustomerID =
RT_CID_819x_WNC_COREGA;
break;
case EEPROM_CID_WHQL:
break;
case EEPROM_CID_NetCore:
padapter->eeprompriv.CustomerID =
RT_CID_819x_Netcore;
break;
case EEPROM_CID_CAMEO1:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CAMEO1;
break;
case EEPROM_CID_CLEVO:
padapter->eeprompriv.CustomerID =
RT_CID_819x_CLEVO;
break;
default:
padapter->eeprompriv.CustomerID =
RT_CID_DEFAULT;
break;
}
dev_info(&udev->dev, "r8712u: CustomerID = 0x%.4x\n",
padapter->eeprompriv.CustomerID);
/* Led mode */
switch (padapter->eeprompriv.CustomerID) {
case RT_CID_DEFAULT:
case RT_CID_819x_ALPHA:
case RT_CID_819x_CAMEO:
padapter->ledpriv.LedStrategy = SW_LED_MODE1;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sitecom:
padapter->ledpriv.LedStrategy = SW_LED_MODE2;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_COREGA:
case RT_CID_819x_Senao:
padapter->ledpriv.LedStrategy = SW_LED_MODE3;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Edimax_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE4;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_Sercomm_Belkin:
padapter->ledpriv.LedStrategy = SW_LED_MODE5;
padapter->ledpriv.bRegUseLed = true;
break;
case RT_CID_819x_WNC_COREGA:
padapter->ledpriv.LedStrategy = SW_LED_MODE6;
padapter->ledpriv.bRegUseLed = true;
break;
default:
padapter->ledpriv.LedStrategy = SW_LED_MODE0;
padapter->ledpriv.bRegUseLed = false;
break;
}
} else
AutoloadFail = false;
if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
(mac[2] == 0xff) && (mac[3] == 0xff) &&
(mac[4] == 0xff) && (mac[5] == 0xff)) ||
((mac[0] == 0x00) && (mac[1] == 0x00) &&
(mac[2] == 0x00) && (mac[3] == 0x00) &&
(mac[4] == 0x00) && (mac[5] == 0x00)) ||
(AutoloadFail == false)) {
mac[0] = 0x00;
mac[1] = 0xe0;
mac[2] = 0x4c;
mac[3] = 0x87;
mac[4] = 0x00;
mac[5] = 0x00;
}
if (r8712_initmac) {
/* Make sure the user did not select a multicast
* address by setting bit 1 of first octet.
*/
mac[0] &= 0xFE;
dev_info(&udev->dev, "r8712u: MAC Address from user = %pM\n", mac);
} else
dev_info(&udev->dev, "r8712u: MAC Address from efuse = %pM\n", mac);
memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
}
/* step 6. Load the firmware asynchronously */
if (rtl871x_load_fw(padapter))
goto error;
spin_lock_init(&padapter->lockRxFF0Filter);
mutex_init(&padapter->mutex_start);
return 0;
error:
usb_put_dev(udev);
usb_set_intfdata(pusb_intf, NULL);
if (padapter->dvobj_deinit != NULL)
padapter->dvobj_deinit(padapter);
if (pnetdev)
free_netdev(pnetdev);
return -ENODEV;
}
/* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
* => how to recognize both */
static void r871xu_dev_remove(struct usb_interface *pusb_intf)
{
struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
struct _adapter *padapter = netdev_priv(pnetdev);
struct usb_device *udev = interface_to_usbdev(pusb_intf);
usb_set_intfdata(pusb_intf, NULL);
if (padapter->fw_found)
release_firmware(padapter->fw);
/* never exit with a firmware callback pending */
wait_for_completion(&padapter->rtl8712_fw_ready);
if (drvpriv.drv_registered == true)
padapter->bSurpriseRemoved = true;
if (pnetdev != NULL) {
/* will call netdev_close() */
unregister_netdev(pnetdev);
}
flush_scheduled_work();
udelay(1);
/*Stop driver mlme relation timer */
if (padapter->fw_found)
r8712_stop_drv_timers(padapter);
r871x_dev_unload(padapter);
r8712_free_drv_sw(padapter);
usb_set_intfdata(pusb_intf, NULL);
/* decrease the reference count of the usb device structure
* when disconnect */
usb_put_dev(udev);
/* If we didn't unplug usb dongle and remove/insert module, driver
* fails on sitesurvey for the first time when device is up.
* Reset usb port for sitesurvey fail issue. */
if (udev->state != USB_STATE_NOTATTACHED)
usb_reset_device(udev);
return;
}
static int __init r8712u_drv_entry(void)
{
drvpriv.drv_registered = true;
return usb_register(&drvpriv.r871xu_drv);
}
static void __exit r8712u_drv_halt(void)
{
drvpriv.drv_registered = false;
usb_deregister(&drvpriv.r871xu_drv);
}
module_init(r8712u_drv_entry);
module_exit(r8712u_drv_halt);