https://github.com/torvalds/linux
Tip revision: c9eaa447e77efe77b7fa4c953bd62de8297fd6c5 authored by Linus Torvalds on 13 April 2014, 21:18:35 UTC
Linux 3.15-rc1
Linux 3.15-rc1
Tip revision: c9eaa44
ms.h
/* Driver for Realtek RTS51xx USB card reader
* Header file
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* wwang (wei_wang@realsil.com.cn)
* No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
* Maintainer:
* Edwin Rong (edwin_rong@realsil.com.cn)
* No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
*/
#ifndef __RTS51X_MS_H
#define __RTS51X_MS_H
#include "rts51x_chip.h"
#define MS_MAX_RETRY_COUNT 3
#define MS_EXTRA_SIZE 0x9
#define WRT_PRTCT 0x01
/* Error Code */
#define MS_NO_ERROR 0x00
#define MS_CRC16_ERROR 0x80
#define MS_TO_ERROR 0x40
#define MS_NO_CARD 0x20
#define MS_NO_MEMORY 0x10
#define MS_CMD_NK 0x08
#define MS_FLASH_READ_ERROR 0x04
#define MS_FLASH_WRITE_ERROR 0x02
#define MS_BREQ_ERROR 0x01
#define MS_NOT_FOUND 0x03
/* Transfer Protocol Command */
#define READ_PAGE_DATA 0x02
#define READ_REG 0x04
#define GET_INT 0x07
#define WRITE_PAGE_DATA 0x0D
#define WRITE_REG 0x0B
#define SET_RW_REG_ADRS 0x08
#define SET_CMD 0x0E
#define PRO_READ_LONG_DATA 0x02
#define PRO_READ_SHORT_DATA 0x03
#define PRO_READ_REG 0x04
#define PRO_READ_QUAD_DATA 0x05
#define PRO_GET_INT 0x07
#define PRO_WRITE_LONG_DATA 0x0D
#define PRO_WRITE_SHORT_DATA 0x0C
#define PRO_WRITE_QUAD_DATA 0x0A
#define PRO_WRITE_REG 0x0B
#define PRO_SET_RW_REG_ADRS 0x08
#define PRO_SET_CMD 0x0E
#define PRO_EX_SET_CMD 0x09
#ifdef SUPPORT_MAGIC_GATE
#define MG_GET_ID 0x40
#define MG_SET_LID 0x41
#define MG_GET_LEKB 0x42
#define MG_SET_RD 0x43
#define MG_MAKE_RMS 0x44
#define MG_MAKE_KSE 0x45
#define MG_SET_IBD 0x46
#define MG_GET_IBD 0x47
#endif
#ifdef XC_POWERCLASS
#define XC_CHG_POWER 0x16
#endif
/* ++ CMD over Memory Stick */
/* Flash CMD */
#define BLOCK_READ 0xAA
#define BLOCK_WRITE 0x55
#define BLOCK_END 0x33
#define BLOCK_ERASE 0x99
#define FLASH_STOP 0xCC
/* Function CMD */
#define SLEEP 0x5A
#define CLEAR_BUF 0xC3
#define MS_RESET 0x3C
/* -- CMD over Memory Stick */
/* ++ CMD over Memory Stick Pro */
/* Flash CMD */
#define PRO_READ_DATA 0x20
#define PRO_WRITE_DATA 0x21
#define PRO_READ_ATRB 0x24
#define PRO_STOP 0x25
#define PRO_ERASE 0x26
#define PRO_READ_2K_DATA 0x27
#define PRO_WRITE_2K_DATA 0x28
/* Function CMD */
#define PRO_FORMAT 0x10
#define PRO_SLEEP 0x11
/* -- CMD over Memory Stick Pro */
/* register inside memory stick */
#define IntReg 0x01
#define StatusReg0 0x02
#define StatusReg1 0x03
#define SystemParm 0x10
#define BlockAdrs 0x11
#define CMDParm 0x14
#define PageAdrs 0x15
#define OverwriteFlag 0x16
#define ManagemenFlag 0x17
#define LogicalAdrs 0x18
#define ReserveArea 0x1A
/* register inside memory pro */
#define Pro_IntReg 0x01
#define Pro_StatusReg 0x02
#define Pro_TypeReg 0x04
#define Pro_IFModeReg 0x05
#define Pro_CatagoryReg 0x06
#define Pro_ClassReg 0x07
#define Pro_SystemParm 0x10
#define Pro_DataCount1 0x11
#define Pro_DataCount0 0x12
#define Pro_DataAddr3 0x13
#define Pro_DataAddr2 0x14
#define Pro_DataAddr1 0x15
#define Pro_DataAddr0 0x16
#define Pro_TPCParm 0x17
#define Pro_CMDParm 0x18
/* define for INT Register */
#define INT_REG_CED 0x80
#define INT_REG_ERR 0x40
#define INT_REG_BREQ 0x20
#define INT_REG_CMDNK 0x01
/* INT signal */
#define INT_CED 0x01
#define INT_ERR 0x02
#define INT_BREQ 0x04
#define INT_CMDNK 0x08
/* define for OverwriteFlag Register */
#define BLOCK_BOOT 0xC0
#define BLOCK_OK 0x80
#define PAGE_OK 0x60
#define DATA_COMPL 0x10
/* define for ManagemenFlag Register */
#define NOT_BOOT_BLOCK 0x4
#define NOT_TRANSLATION_TABLE 0x8
/* Header */
#define HEADER_ID0 (PPBUF_BASE2) /* 0 */
#define HEADER_ID1 (PPBUF_BASE2 + 1) /* 1 */
/* System Entry */
#define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4) /* 2 */
#define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5) /* 3 */
#define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6) /* 4 */
#define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7) /* 5 */
/* Boot & Attribute Information */
#define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2) /* 6 */
#define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3) /* 7 */
#define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4) /* 8 */
#define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5) /* 9 */
#define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6) /* 10 */
#define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7) /* 11 */
#define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8) /* 12 */
#define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9) /* 13 */
/* joey 2004-08-07 for MS check Procedure */
#define MS_Device_Type (PPBUF_BASE2 + 0x1D8) /* 14 */
/* end */
/* joey 2004-05-03 */
#define MS_4bit_Support (PPBUF_BASE2 + 0x1D3) /* 15 */
/* end */
#define setPS_NG 1
#define setPS_Error 0
/* define for Pro_SystemParm Register */
#define PARALLEL_8BIT_IF 0x40
#define PARALLEL_4BIT_IF 0x00
#define SERIAL_IF 0x80
/* define for StatusReg0 Register */
#define BUF_FULL 0x10
#define BUF_EMPTY 0x20
/* define for StatusReg1 Register */
#define MEDIA_BUSY 0x80
#define FLASH_BUSY 0x40
#define DATA_ERROR 0x20
#define STS_UCDT 0x10
#define EXTRA_ERROR 0x08
#define STS_UCEX 0x04
#define FLAG_ERROR 0x02
#define STS_UCFG 0x01
#define MS_SHORT_DATA_LEN 32
#define FORMAT_SUCCESS 0
#define FORMAT_FAIL 1
#define FORMAT_IN_PROGRESS 2
#define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80)
#define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F)
#define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80)
#define CHECK_MS_TRANS_FAIL(chip, retval) \
(((retval) != STATUS_SUCCESS) || \
(chip->rsp_buf[0] & MS_TRANSFER_ERR))
void rts51x_mspro_polling_format_status(struct rts51x_chip *chip);
void rts51x_mspro_format_sense(struct rts51x_chip *chip, unsigned int lun);
int rts51x_reset_ms_card(struct rts51x_chip *chip);
int rts51x_ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
u16 sector_cnt);
int rts51x_mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
int short_data_len, int quick_format);
void rts51x_ms_free_l2p_tbl(struct rts51x_chip *chip);
void rts51x_ms_cleanup_work(struct rts51x_chip *chip);
int rts51x_release_ms_card(struct rts51x_chip *chip);
int rts51x_ms_delay_write(struct rts51x_chip *chip);
#ifdef SUPPORT_MAGIC_GATE
int ms_switch_clock(struct rts51x_chip *chip);
int ms_write_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 *data,
int data_len);
int ms_read_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 *data,
int data_len);
int ms_set_rw_reg_addr(struct rts51x_chip *chip, u8 read_start, u8 read_cnt,
u8 write_start, u8 write_cnt);
int ms_transfer_data(struct rts51x_chip *chip, u8 trans_mode, u8 tpc,
u16 sec_cnt, u8 cfg, int mode_2k, int use_sg, void *buf,
int buf_len);
#endif
#endif /* __RTS51X_MS_H */