https://github.com/torvalds/linux
Tip revision: 2dcd0af568b0cf583645c8a317dd12e344b1c72a authored by Linus Torvalds on 15 May 2016, 22:43:13 UTC
Linux 4.6
Linux 4.6
Tip revision: 2dcd0af
shwdt.c
/*
* drivers/watchdog/shwdt.c
*
* Watchdog driver for integrated watchdog in the SuperH processors.
*
* Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
*
* 19-Apr-2002 Rob Radez <rob@osinvestor.com>
* Added expect close support, made emulated timeout runtime changeable
* general cleanups, add some ioctls
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/watchdog.h>
#include <linux/pm_runtime.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <asm/watchdog.h>
#define DRV_NAME "sh-wdt"
/*
* Default clock division ratio is 5.25 msecs. For an additional table of
* values, consult the asm-sh/watchdog.h. Overload this at module load
* time.
*
* In order for this to work reliably we need to have HZ set to 1000 or
* something quite higher than 100 (or we need a proper high-res timer
* implementation that will deal with this properly), otherwise the 10ms
* resolution of a jiffy is enough to trigger the overflow. For things like
* the SH-4 and SH-5, this isn't necessarily that big of a problem, though
* for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
* necssary.
*
* As a result of this timing problem, the only modes that are particularly
* feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
* overflow periods respectively.
*
* Also, since we can't really expect userspace to be responsive enough
* before the overflow happens, we maintain two separate timers .. One in
* the kernel for clearing out WOVF every 2ms or so (again, this depends on
* HZ == 1000), and another for monitoring userspace writes to the WDT device.
*
* As such, we currently use a configurable heartbeat interval which defaults
* to 30s. In this case, the userspace daemon is only responsible for periodic
* writes to the device before the next heartbeat is scheduled. If the daemon
* misses its deadline, the kernel timer will allow the WDT to overflow.
*/
static int clock_division_ratio = WTCSR_CKS_4096;
#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
static bool nowayout = WATCHDOG_NOWAYOUT;
static unsigned long next_heartbeat;
struct sh_wdt {
void __iomem *base;
struct device *dev;
struct clk *clk;
spinlock_t lock;
struct timer_list timer;
};
static int sh_wdt_start(struct watchdog_device *wdt_dev)
{
struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
unsigned long flags;
u8 csr;
pm_runtime_get_sync(wdt->dev);
clk_enable(wdt->clk);
spin_lock_irqsave(&wdt->lock, flags);
next_heartbeat = jiffies + (heartbeat * HZ);
mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
csr = sh_wdt_read_csr();
csr |= WTCSR_WT | clock_division_ratio;
sh_wdt_write_csr(csr);
sh_wdt_write_cnt(0);
/*
* These processors have a bit of an inconsistent initialization
* process.. starting with SH-3, RSTS was moved to WTCSR, and the
* RSTCSR register was removed.
*
* On the SH-2 however, in addition with bits being in different
* locations, we must deal with RSTCSR outright..
*/
csr = sh_wdt_read_csr();
csr |= WTCSR_TME;
csr &= ~WTCSR_RSTS;
sh_wdt_write_csr(csr);
#ifdef CONFIG_CPU_SH2
csr = sh_wdt_read_rstcsr();
csr &= ~RSTCSR_RSTS;
sh_wdt_write_rstcsr(csr);
#endif
spin_unlock_irqrestore(&wdt->lock, flags);
return 0;
}
static int sh_wdt_stop(struct watchdog_device *wdt_dev)
{
struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
unsigned long flags;
u8 csr;
spin_lock_irqsave(&wdt->lock, flags);
del_timer(&wdt->timer);
csr = sh_wdt_read_csr();
csr &= ~WTCSR_TME;
sh_wdt_write_csr(csr);
spin_unlock_irqrestore(&wdt->lock, flags);
clk_disable(wdt->clk);
pm_runtime_put_sync(wdt->dev);
return 0;
}
static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
{
struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
unsigned long flags;
spin_lock_irqsave(&wdt->lock, flags);
next_heartbeat = jiffies + (heartbeat * HZ);
spin_unlock_irqrestore(&wdt->lock, flags);
return 0;
}
static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
{
struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
unsigned long flags;
if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
return -EINVAL;
spin_lock_irqsave(&wdt->lock, flags);
heartbeat = t;
wdt_dev->timeout = t;
spin_unlock_irqrestore(&wdt->lock, flags);
return 0;
}
static void sh_wdt_ping(unsigned long data)
{
struct sh_wdt *wdt = (struct sh_wdt *)data;
unsigned long flags;
spin_lock_irqsave(&wdt->lock, flags);
if (time_before(jiffies, next_heartbeat)) {
u8 csr;
csr = sh_wdt_read_csr();
csr &= ~WTCSR_IOVF;
sh_wdt_write_csr(csr);
sh_wdt_write_cnt(0);
mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
} else
dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
"the watchdog\n");
spin_unlock_irqrestore(&wdt->lock, flags);
}
static const struct watchdog_info sh_wdt_info = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "SH WDT",
};
static const struct watchdog_ops sh_wdt_ops = {
.owner = THIS_MODULE,
.start = sh_wdt_start,
.stop = sh_wdt_stop,
.ping = sh_wdt_keepalive,
.set_timeout = sh_wdt_set_heartbeat,
};
static struct watchdog_device sh_wdt_dev = {
.info = &sh_wdt_info,
.ops = &sh_wdt_ops,
};
static int sh_wdt_probe(struct platform_device *pdev)
{
struct sh_wdt *wdt;
struct resource *res;
int rc;
/*
* As this driver only covers the global watchdog case, reject
* any attempts to register per-CPU watchdogs.
*/
if (pdev->id != -1)
return -EINVAL;
wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
if (unlikely(!wdt))
return -ENOMEM;
wdt->dev = &pdev->dev;
wdt->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(wdt->clk)) {
/*
* Clock framework support is optional, continue on
* anyways if we don't find a matching clock.
*/
wdt->clk = NULL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt->base = devm_ioremap_resource(wdt->dev, res);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
watchdog_set_nowayout(&sh_wdt_dev, nowayout);
watchdog_set_drvdata(&sh_wdt_dev, wdt);
sh_wdt_dev.parent = &pdev->dev;
spin_lock_init(&wdt->lock);
rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
if (unlikely(rc)) {
/* Default timeout if invalid */
sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
dev_warn(&pdev->dev,
"heartbeat value must be 1<=x<=3600, using %d\n",
sh_wdt_dev.timeout);
}
dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
sh_wdt_dev.timeout, nowayout);
rc = watchdog_register_device(&sh_wdt_dev);
if (unlikely(rc)) {
dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
return rc;
}
init_timer(&wdt->timer);
wdt->timer.function = sh_wdt_ping;
wdt->timer.data = (unsigned long)wdt;
wdt->timer.expires = next_ping_period(clock_division_ratio);
dev_info(&pdev->dev, "initialized.\n");
pm_runtime_enable(&pdev->dev);
return 0;
}
static int sh_wdt_remove(struct platform_device *pdev)
{
watchdog_unregister_device(&sh_wdt_dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static void sh_wdt_shutdown(struct platform_device *pdev)
{
sh_wdt_stop(&sh_wdt_dev);
}
static struct platform_driver sh_wdt_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = sh_wdt_probe,
.remove = sh_wdt_remove,
.shutdown = sh_wdt_shutdown,
};
static int __init sh_wdt_init(void)
{
if (unlikely(clock_division_ratio < 0x5 ||
clock_division_ratio > 0x7)) {
clock_division_ratio = WTCSR_CKS_4096;
pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
clock_division_ratio);
}
return platform_driver_register(&sh_wdt_driver);
}
static void __exit sh_wdt_exit(void)
{
platform_driver_unregister(&sh_wdt_driver);
}
module_init(sh_wdt_init);
module_exit(sh_wdt_exit);
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
MODULE_DESCRIPTION("SuperH watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
module_param(clock_division_ratio, int, 0);
MODULE_PARM_DESC(clock_division_ratio,
"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
"to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
"Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");