https://github.com/torvalds/linux
Tip revision: b7b275e60bcd5f89771e865a8239325f86d9927d authored by Linus Torvalds on 27 November 2022, 21:31:48 UTC
Linux 6.1-rc7
Linux 6.1-rc7
Tip revision: b7b275e
aead.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* AEAD: Authenticated Encryption with Associated Data
*
* Copyright (c) 2007-2015 Herbert Xu <herbert@gondor.apana.org.au>
*/
#ifndef _CRYPTO_AEAD_H
#define _CRYPTO_AEAD_H
#include <linux/container_of.h>
#include <linux/crypto.h>
#include <linux/slab.h>
#include <linux/types.h>
/**
* DOC: Authenticated Encryption With Associated Data (AEAD) Cipher API
*
* The AEAD cipher API is used with the ciphers of type CRYPTO_ALG_TYPE_AEAD
* (listed as type "aead" in /proc/crypto)
*
* The most prominent examples for this type of encryption is GCM and CCM.
* However, the kernel supports other types of AEAD ciphers which are defined
* with the following cipher string:
*
* authenc(keyed message digest, block cipher)
*
* For example: authenc(hmac(sha256), cbc(aes))
*
* The example code provided for the symmetric key cipher operation
* applies here as well. Naturally all *skcipher* symbols must be exchanged
* the *aead* pendants discussed in the following. In addition, for the AEAD
* operation, the aead_request_set_ad function must be used to set the
* pointer to the associated data memory location before performing the
* encryption or decryption operation. In case of an encryption, the associated
* data memory is filled during the encryption operation. For decryption, the
* associated data memory must contain data that is used to verify the integrity
* of the decrypted data. Another deviation from the asynchronous block cipher
* operation is that the caller should explicitly check for -EBADMSG of the
* crypto_aead_decrypt. That error indicates an authentication error, i.e.
* a breach in the integrity of the message. In essence, that -EBADMSG error
* code is the key bonus an AEAD cipher has over "standard" block chaining
* modes.
*
* Memory Structure:
*
* The source scatterlist must contain the concatenation of
* associated data || plaintext or ciphertext.
*
* The destination scatterlist has the same layout, except that the plaintext
* (resp. ciphertext) will grow (resp. shrink) by the authentication tag size
* during encryption (resp. decryption).
*
* In-place encryption/decryption is enabled by using the same scatterlist
* pointer for both the source and destination.
*
* Even in the out-of-place case, space must be reserved in the destination for
* the associated data, even though it won't be written to. This makes the
* in-place and out-of-place cases more consistent. It is permissible for the
* "destination" associated data to alias the "source" associated data.
*
* As with the other scatterlist crypto APIs, zero-length scatterlist elements
* are not allowed in the used part of the scatterlist. Thus, if there is no
* associated data, the first element must point to the plaintext/ciphertext.
*
* To meet the needs of IPsec, a special quirk applies to rfc4106, rfc4309,
* rfc4543, and rfc7539esp ciphers. For these ciphers, the final 'ivsize' bytes
* of the associated data buffer must contain a second copy of the IV. This is
* in addition to the copy passed to aead_request_set_crypt(). These two IV
* copies must not differ; different implementations of the same algorithm may
* behave differently in that case. Note that the algorithm might not actually
* treat the IV as associated data; nevertheless the length passed to
* aead_request_set_ad() must include it.
*/
struct crypto_aead;
struct scatterlist;
/**
* struct aead_request - AEAD request
* @base: Common attributes for async crypto requests
* @assoclen: Length in bytes of associated data for authentication
* @cryptlen: Length of data to be encrypted or decrypted
* @iv: Initialisation vector
* @src: Source data
* @dst: Destination data
* @__ctx: Start of private context data
*/
struct aead_request {
struct crypto_async_request base;
unsigned int assoclen;
unsigned int cryptlen;
u8 *iv;
struct scatterlist *src;
struct scatterlist *dst;
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
/**
* struct aead_alg - AEAD cipher definition
* @maxauthsize: Set the maximum authentication tag size supported by the
* transformation. A transformation may support smaller tag sizes.
* As the authentication tag is a message digest to ensure the
* integrity of the encrypted data, a consumer typically wants the
* largest authentication tag possible as defined by this
* variable.
* @setauthsize: Set authentication size for the AEAD transformation. This
* function is used to specify the consumer requested size of the
* authentication tag to be either generated by the transformation
* during encryption or the size of the authentication tag to be
* supplied during the decryption operation. This function is also
* responsible for checking the authentication tag size for
* validity.
* @setkey: see struct skcipher_alg
* @encrypt: see struct skcipher_alg
* @decrypt: see struct skcipher_alg
* @ivsize: see struct skcipher_alg
* @chunksize: see struct skcipher_alg
* @init: Initialize the cryptographic transformation object. This function
* is used to initialize the cryptographic transformation object.
* This function is called only once at the instantiation time, right
* after the transformation context was allocated. In case the
* cryptographic hardware has some special requirements which need to
* be handled by software, this function shall check for the precise
* requirement of the transformation and put any software fallbacks
* in place.
* @exit: Deinitialize the cryptographic transformation object. This is a
* counterpart to @init, used to remove various changes set in
* @init.
* @base: Definition of a generic crypto cipher algorithm.
*
* All fields except @ivsize is mandatory and must be filled.
*/
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen);
int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize);
int (*encrypt)(struct aead_request *req);
int (*decrypt)(struct aead_request *req);
int (*init)(struct crypto_aead *tfm);
void (*exit)(struct crypto_aead *tfm);
unsigned int ivsize;
unsigned int maxauthsize;
unsigned int chunksize;
struct crypto_alg base;
};
struct crypto_aead {
unsigned int authsize;
unsigned int reqsize;
struct crypto_tfm base;
};
static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm)
{
return container_of(tfm, struct crypto_aead, base);
}
/**
* crypto_alloc_aead() - allocate AEAD cipher handle
* @alg_name: is the cra_name / name or cra_driver_name / driver name of the
* AEAD cipher
* @type: specifies the type of the cipher
* @mask: specifies the mask for the cipher
*
* Allocate a cipher handle for an AEAD. The returned struct
* crypto_aead is the cipher handle that is required for any subsequent
* API invocation for that AEAD.
*
* Return: allocated cipher handle in case of success; IS_ERR() is true in case
* of an error, PTR_ERR() returns the error code.
*/
struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask);
static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm)
{
return &tfm->base;
}
/**
* crypto_free_aead() - zeroize and free aead handle
* @tfm: cipher handle to be freed
*
* If @tfm is a NULL or error pointer, this function does nothing.
*/
static inline void crypto_free_aead(struct crypto_aead *tfm)
{
crypto_destroy_tfm(tfm, crypto_aead_tfm(tfm));
}
static inline const char *crypto_aead_driver_name(struct crypto_aead *tfm)
{
return crypto_tfm_alg_driver_name(crypto_aead_tfm(tfm));
}
static inline struct aead_alg *crypto_aead_alg(struct crypto_aead *tfm)
{
return container_of(crypto_aead_tfm(tfm)->__crt_alg,
struct aead_alg, base);
}
static inline unsigned int crypto_aead_alg_ivsize(struct aead_alg *alg)
{
return alg->ivsize;
}
/**
* crypto_aead_ivsize() - obtain IV size
* @tfm: cipher handle
*
* The size of the IV for the aead referenced by the cipher handle is
* returned. This IV size may be zero if the cipher does not need an IV.
*
* Return: IV size in bytes
*/
static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm)
{
return crypto_aead_alg_ivsize(crypto_aead_alg(tfm));
}
/**
* crypto_aead_authsize() - obtain maximum authentication data size
* @tfm: cipher handle
*
* The maximum size of the authentication data for the AEAD cipher referenced
* by the AEAD cipher handle is returned. The authentication data size may be
* zero if the cipher implements a hard-coded maximum.
*
* The authentication data may also be known as "tag value".
*
* Return: authentication data size / tag size in bytes
*/
static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm)
{
return tfm->authsize;
}
static inline unsigned int crypto_aead_alg_maxauthsize(struct aead_alg *alg)
{
return alg->maxauthsize;
}
static inline unsigned int crypto_aead_maxauthsize(struct crypto_aead *aead)
{
return crypto_aead_alg_maxauthsize(crypto_aead_alg(aead));
}
/**
* crypto_aead_blocksize() - obtain block size of cipher
* @tfm: cipher handle
*
* The block size for the AEAD referenced with the cipher handle is returned.
* The caller may use that information to allocate appropriate memory for the
* data returned by the encryption or decryption operation
*
* Return: block size of cipher
*/
static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm)
{
return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm));
}
static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm)
{
return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm));
}
static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm)
{
return crypto_tfm_get_flags(crypto_aead_tfm(tfm));
}
static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags)
{
crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags);
}
static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags)
{
crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags);
}
/**
* crypto_aead_setkey() - set key for cipher
* @tfm: cipher handle
* @key: buffer holding the key
* @keylen: length of the key in bytes
*
* The caller provided key is set for the AEAD referenced by the cipher
* handle.
*
* Note, the key length determines the cipher type. Many block ciphers implement
* different cipher modes depending on the key size, such as AES-128 vs AES-192
* vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128
* is performed.
*
* Return: 0 if the setting of the key was successful; < 0 if an error occurred
*/
int crypto_aead_setkey(struct crypto_aead *tfm,
const u8 *key, unsigned int keylen);
/**
* crypto_aead_setauthsize() - set authentication data size
* @tfm: cipher handle
* @authsize: size of the authentication data / tag in bytes
*
* Set the authentication data size / tag size. AEAD requires an authentication
* tag (or MAC) in addition to the associated data.
*
* Return: 0 if the setting of the key was successful; < 0 if an error occurred
*/
int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize);
static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req)
{
return __crypto_aead_cast(req->base.tfm);
}
/**
* crypto_aead_encrypt() - encrypt plaintext
* @req: reference to the aead_request handle that holds all information
* needed to perform the cipher operation
*
* Encrypt plaintext data using the aead_request handle. That data structure
* and how it is filled with data is discussed with the aead_request_*
* functions.
*
* IMPORTANT NOTE The encryption operation creates the authentication data /
* tag. That data is concatenated with the created ciphertext.
* The ciphertext memory size is therefore the given number of
* block cipher blocks + the size defined by the
* crypto_aead_setauthsize invocation. The caller must ensure
* that sufficient memory is available for the ciphertext and
* the authentication tag.
*
* Return: 0 if the cipher operation was successful; < 0 if an error occurred
*/
int crypto_aead_encrypt(struct aead_request *req);
/**
* crypto_aead_decrypt() - decrypt ciphertext
* @req: reference to the aead_request handle that holds all information
* needed to perform the cipher operation
*
* Decrypt ciphertext data using the aead_request handle. That data structure
* and how it is filled with data is discussed with the aead_request_*
* functions.
*
* IMPORTANT NOTE The caller must concatenate the ciphertext followed by the
* authentication data / tag. That authentication data / tag
* must have the size defined by the crypto_aead_setauthsize
* invocation.
*
*
* Return: 0 if the cipher operation was successful; -EBADMSG: The AEAD
* cipher operation performs the authentication of the data during the
* decryption operation. Therefore, the function returns this error if
* the authentication of the ciphertext was unsuccessful (i.e. the
* integrity of the ciphertext or the associated data was violated);
* < 0 if an error occurred.
*/
int crypto_aead_decrypt(struct aead_request *req);
/**
* DOC: Asynchronous AEAD Request Handle
*
* The aead_request data structure contains all pointers to data required for
* the AEAD cipher operation. This includes the cipher handle (which can be
* used by multiple aead_request instances), pointer to plaintext and
* ciphertext, asynchronous callback function, etc. It acts as a handle to the
* aead_request_* API calls in a similar way as AEAD handle to the
* crypto_aead_* API calls.
*/
/**
* crypto_aead_reqsize() - obtain size of the request data structure
* @tfm: cipher handle
*
* Return: number of bytes
*/
static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm)
{
return tfm->reqsize;
}
/**
* aead_request_set_tfm() - update cipher handle reference in request
* @req: request handle to be modified
* @tfm: cipher handle that shall be added to the request handle
*
* Allow the caller to replace the existing aead handle in the request
* data structure with a different one.
*/
static inline void aead_request_set_tfm(struct aead_request *req,
struct crypto_aead *tfm)
{
req->base.tfm = crypto_aead_tfm(tfm);
}
/**
* aead_request_alloc() - allocate request data structure
* @tfm: cipher handle to be registered with the request
* @gfp: memory allocation flag that is handed to kmalloc by the API call.
*
* Allocate the request data structure that must be used with the AEAD
* encrypt and decrypt API calls. During the allocation, the provided aead
* handle is registered in the request data structure.
*
* Return: allocated request handle in case of success, or NULL if out of memory
*/
static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm,
gfp_t gfp)
{
struct aead_request *req;
req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp);
if (likely(req))
aead_request_set_tfm(req, tfm);
return req;
}
/**
* aead_request_free() - zeroize and free request data structure
* @req: request data structure cipher handle to be freed
*/
static inline void aead_request_free(struct aead_request *req)
{
kfree_sensitive(req);
}
/**
* aead_request_set_callback() - set asynchronous callback function
* @req: request handle
* @flags: specify zero or an ORing of the flags
* CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and
* increase the wait queue beyond the initial maximum size;
* CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep
* @compl: callback function pointer to be registered with the request handle
* @data: The data pointer refers to memory that is not used by the kernel
* crypto API, but provided to the callback function for it to use. Here,
* the caller can provide a reference to memory the callback function can
* operate on. As the callback function is invoked asynchronously to the
* related functionality, it may need to access data structures of the
* related functionality which can be referenced using this pointer. The
* callback function can access the memory via the "data" field in the
* crypto_async_request data structure provided to the callback function.
*
* Setting the callback function that is triggered once the cipher operation
* completes
*
* The callback function is registered with the aead_request handle and
* must comply with the following template::
*
* void callback_function(struct crypto_async_request *req, int error)
*/
static inline void aead_request_set_callback(struct aead_request *req,
u32 flags,
crypto_completion_t compl,
void *data)
{
req->base.complete = compl;
req->base.data = data;
req->base.flags = flags;
}
/**
* aead_request_set_crypt - set data buffers
* @req: request handle
* @src: source scatter / gather list
* @dst: destination scatter / gather list
* @cryptlen: number of bytes to process from @src
* @iv: IV for the cipher operation which must comply with the IV size defined
* by crypto_aead_ivsize()
*
* Setting the source data and destination data scatter / gather lists which
* hold the associated data concatenated with the plaintext or ciphertext. See
* below for the authentication tag.
*
* For encryption, the source is treated as the plaintext and the
* destination is the ciphertext. For a decryption operation, the use is
* reversed - the source is the ciphertext and the destination is the plaintext.
*
* The memory structure for cipher operation has the following structure:
*
* - AEAD encryption input: assoc data || plaintext
* - AEAD encryption output: assoc data || ciphertext || auth tag
* - AEAD decryption input: assoc data || ciphertext || auth tag
* - AEAD decryption output: assoc data || plaintext
*
* Albeit the kernel requires the presence of the AAD buffer, however,
* the kernel does not fill the AAD buffer in the output case. If the
* caller wants to have that data buffer filled, the caller must either
* use an in-place cipher operation (i.e. same memory location for
* input/output memory location).
*/
static inline void aead_request_set_crypt(struct aead_request *req,
struct scatterlist *src,
struct scatterlist *dst,
unsigned int cryptlen, u8 *iv)
{
req->src = src;
req->dst = dst;
req->cryptlen = cryptlen;
req->iv = iv;
}
/**
* aead_request_set_ad - set associated data information
* @req: request handle
* @assoclen: number of bytes in associated data
*
* Setting the AD information. This function sets the length of
* the associated data.
*/
static inline void aead_request_set_ad(struct aead_request *req,
unsigned int assoclen)
{
req->assoclen = assoclen;
}
#endif /* _CRYPTO_AEAD_H */