https://github.com/torvalds/linux
Tip revision: b7392d2247cfe6771f95d256374f1a8e6a6f48d6 authored by Linus Torvalds on 29 December 2014, 00:49:37 UTC
Linux 3.19-rc2
Linux 3.19-rc2
Tip revision: b7392d2
serial_sci.h
#ifndef __LINUX_SERIAL_SCI_H
#define __LINUX_SERIAL_SCI_H
#include <linux/serial_core.h>
#include <linux/sh_dma.h>
/*
* Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
*/
#define SCIx_NOT_SUPPORTED (-1)
/* SCSMR (Serial Mode Register) */
#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */
#define SCSMR_PE (1 << 5) /* Parity Enable */
#define SCSMR_ODD (1 << 4) /* Odd Parity */
#define SCSMR_STOP (1 << 3) /* Stop Bit Length */
#define SCSMR_CKS 0x0003 /* Clock Select */
/* Serial Control Register (@ = not supported by all parts) */
#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */
#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */
#define SCSCR_TE (1 << 5) /* Transmit Enable */
#define SCSCR_RE (1 << 4) /* Receive Enable */
#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */
#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */
#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */
#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */
/* SCIFA/SCIFB only */
#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */
/* SCxSR (Serial Status Register) on SCI */
#define SCI_TDRE 0x80 /* Transmit Data Register Empty */
#define SCI_RDRF 0x40 /* Receive Data Register Full */
#define SCI_ORER 0x20 /* Overrun Error */
#define SCI_FER 0x10 /* Framing Error */
#define SCI_PER 0x08 /* Parity Error */
#define SCI_TEND 0x04 /* Transmit End */
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
/* SCxSR (Serial Status Register) on SCIF, HSCIF */
#define SCIF_ER 0x0080 /* Receive Error */
#define SCIF_TEND 0x0040 /* Transmission End */
#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */
#define SCIF_BRK 0x0010 /* Break Detect */
#define SCIF_FER 0x0008 /* Framing Error */
#define SCIF_PER 0x0004 /* Parity Error */
#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */
#define SCIF_DR 0x0001 /* Receive Data Ready */
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
/* SCFCR (FIFO Control Register) */
#define SCFCR_LOOP (1 << 0) /* Loopback Test */
/* SCSPTR (Serial Port Register), optional */
#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */
#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */
#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */
#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */
/* HSSRR HSCIF */
#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
enum {
SCIx_PROBE_REGTYPE,
SCIx_SCI_REGTYPE,
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
SCIx_SH4_SCIF_FIFODATA_REGTYPE,
SCIx_SH7705_SCIF_REGTYPE,
SCIx_HSCIF_REGTYPE,
SCIx_NR_REGTYPES,
};
/*
* SCI register subset common for all port types.
* Not all registers will exist on all parts.
*/
enum {
SCSMR, /* Serial Mode Register */
SCBRR, /* Bit Rate Register */
SCSCR, /* Serial Control Register */
SCxSR, /* Serial Status Register */
SCFCR, /* FIFO Control Register */
SCFDR, /* FIFO Data Count Register */
SCxTDR, /* Transmit (FIFO) Data Register */
SCxRDR, /* Receive (FIFO) Data Register */
SCLSR, /* Line Status Register */
SCTFDR, /* Transmit FIFO Data Count Register */
SCRFDR, /* Receive FIFO Data Count Register */
SCSPTR, /* Serial Port Register */
HSSRR, /* Sampling Rate Register */
SCIx_NR_REGS,
};
struct device;
struct plat_sci_port_ops {
void (*init_pins)(struct uart_port *, unsigned int cflag);
};
/*
* Port-specific capabilities
*/
#define SCIx_HAVE_RTSCTS (1 << 0)
/*
* Platform device specific platform_data struct
*/
struct plat_sci_port {
unsigned int type; /* SCI / SCIF / IRDA / HSCIF */
upf_t flags; /* UPF_* flags */
unsigned long capabilities; /* Port features/capabilities */
unsigned int sampling_rate;
unsigned int scscr; /* SCSCR initialization */
/*
* Platform overrides if necessary, defaults otherwise.
*/
int port_reg;
unsigned char regshift;
unsigned char regtype;
struct plat_sci_port_ops *ops;
unsigned int dma_slave_tx;
unsigned int dma_slave_rx;
};
#endif /* __LINUX_SERIAL_SCI_H */