https://github.com/torvalds/linux
Tip revision: 6a8f57ae2eb07ab39a6f0ccad60c760743051026 authored by Linus Torvalds on 16 April 2023, 22:23:53 UTC
Linux 6.3-rc7
Linux 6.3-rc7
Tip revision: 6a8f57a
snd_sst_tokens.h
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* snd_sst_tokens.h - Intel SST tokens definition
*
* Copyright (C) 2016 Intel Corp
* Author: Shreyas NC <shreyas.nc@intel.com>
*/
#ifndef __SND_SST_TOKENS_H__
#define __SND_SST_TOKENS_H__
/**
* %SKL_TKN_UUID: Module UUID
*
* %SKL_TKN_U8_BLOCK_TYPE: Type of the private data block.Can be:
* tuples, bytes, short and words
*
* %SKL_TKN_U8_IN_PIN_TYPE: Input pin type,
* homogenous=0, heterogenous=1
*
* %SKL_TKN_U8_OUT_PIN_TYPE: Output pin type,
* homogenous=0, heterogenous=1
* %SKL_TKN_U8_DYN_IN_PIN: Configure Input pin dynamically
* if true
*
* %SKL_TKN_U8_DYN_OUT_PIN: Configure Output pin dynamically
* if true
*
* %SKL_TKN_U8_IN_QUEUE_COUNT: Store the number of Input pins
*
* %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins
*
* %SKL_TKN_U8_TIME_SLOT: TDM slot number
*
* %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take
* the values:
* SKL_AFFINITY_CORE_0 = 0,
* SKL_AFFINITY_CORE_1,
* SKL_AFFINITY_CORE_MAX
*
* %SKL_TKN_U8_MOD_TYPE: Module type value.
*
* %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE,
* BE or NONE as defined :
* SKL_PIPE_CONN_TYPE_NONE = 0,
* SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA)
* SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA)
*
* %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is
* connected
* Can take the values:
* SKL_DEVICE_BT = 0x0,
* SKL_DEVICE_DMIC = 0x1,
* SKL_DEVICE_I2S = 0x2,
* SKL_DEVICE_SLIMBUS = 0x3,
* SKL_DEVICE_HDALINK = 0x4,
* SKL_DEVICE_HDAHOST = 0x5,
* SKL_DEVICE_NONE
*
* %SKL_TKN_U8_HW_CONN_TYPE: Connection type of the HW to which the
* module is connected
* SKL_CONN_NONE = 0,
* SKL_CONN_SOURCE = 1,
* SKL_CONN_SINK = 2
*
* %SKL_TKN_U16_PIN_INST_ID: Stores the pin instance id
*
* %SKL_TKN_U16_MOD_INST_ID: Stores the mdule instance id
*
* %SKL_TKN_U32_MAX_MCPS: Module max mcps value
*
* %SKL_TKN_U32_MEM_PAGES: Module resource pages
*
* %SKL_TKN_U32_OBS: Stores Output Buffer size
*
* %SKL_TKN_U32_IBS: Stores input buffer size
*
* %SKL_TKN_U32_VBUS_ID: Module VBUS_ID. PDM=0, SSP0=0,
* SSP1=1,SSP2=2,
* SSP3=3, SSP4=4,
* SSP5=5, SSP6=6,INVALID
*
* %SKL_TKN_U32_PARAMS_FIXUP: Module Params fixup mask
* %SKL_TKN_U32_CONVERTER: Module params converter mask
* %SKL_TKN_U32_PIPE_ID: Stores the pipe id
*
* %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is
* connected to. It can be
* SKL_PIPE_CONN_TYPE_NONE = 0,
* SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA),
* SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA),
*
* %SKL_TKN_U32_PIPE_PRIORITY: Pipe priority value
* %SKL_TKN_U32_PIPE_MEM_PGS: Pipe resource pages
*
* %SKL_TKN_U32_DIR_PIN_COUNT: Value for the direction to set input/output
* formats and the pin count.
* The first 4 bits have the direction
* value and the next 4 have
* the pin count value.
* SKL_DIR_IN = 0, SKL_DIR_OUT = 1.
* The input and output formats
* share the same set of tokens
* with the distinction between input
* and output made by reading direction
* token.
*
* %SKL_TKN_U32_FMT_CH: Supported channel count
*
* %SKL_TKN_U32_FMT_FREQ: Supported frequency/sample rate
*
* %SKL_TKN_U32_FMT_BIT_DEPTH: Supported container size
*
* %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container
*
* %SKL_TKN_U32_FMT_CH_CONFIG: Supported channel configurations for the
* input/output.
*
* %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per
* channel or per sample. The values can be :
* SKL_INTERLEAVING_PER_CHANNEL = 0,
* SKL_INTERLEAVING_PER_SAMPLE = 1,
*
* %SKL_TKN_U32_FMT_SAMPLE_TYPE:
* Specifies the sample type. Can take the
* values: SKL_SAMPLE_TYPE_INT_MSB = 0,
* SKL_SAMPLE_TYPE_INT_LSB = 1,
* SKL_SAMPLE_TYPE_INT_SIGNED = 2,
* SKL_SAMPLE_TYPE_INT_UNSIGNED = 3,
* SKL_SAMPLE_TYPE_FLOAT = 4
*
* %SKL_TKN_U32_CH_MAP: Channel map values
* %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values:
* SKL_PARAM_DEFAULT, SKL_PARAM_INIT,
* SKL_PARAM_SET, SKL_PARAM_BIND
*
* %SKL_TKN_U32_MOD_PARAM_ID: ID of the module params
*
* %SKL_TKN_U32_CAPS_SET_PARAMS:
* Set params value
*
* %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID
*
* %SKL_TKN_U32_CAPS_SIZE: Caps size
*
* %SKL_TKN_U32_PROC_DOMAIN: Specify processing domain
*
* %SKL_TKN_U32_LIB_COUNT: Specifies the number of libraries
*
* %SKL_TKN_STR_LIB_NAME: Specifies the library name
*
* %SKL_TKN_U32_PMODE: Specifies the power mode for pipe
*
* %SKL_TKL_U32_D0I3_CAPS: Specifies the D0i3 capability for module
*
* %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec
*
* %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be
* playback/capture.
*
* %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs
*
* %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline
* and its data
*
* %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe
* and PCM params supported by that pipe
* config. This is used as index to fill
* up the pipe config and module config
* structure.
*
* %SKL_TKN_U32_CFG_FREQ:
* %SKL_TKN_U8_CFG_CHAN:
* %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample)
* supported for each of the pipe configs.
*
* %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the
* pipe config
*
* %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the
* pipe config
*
* %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest
*
* %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest
*
* %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module
*
* %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module
*
* %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to
* be filled into.
* A module can support multiple resource
* configuration and is represnted as a
* resource table. This index is used to
* fill information into appropriate index.
*
* %SKL_TKN_MM_U32_CPS: DSP cycles per second
*
* %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA
*
* %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame
*
* %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module
*
* %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module
*
* %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin
*
* %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/
* format information to be filled into.
*
* %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats
* %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats
*
* %SKL_TKN_U32_ASTATE_IDX: Table Index for the A-State entry to be filled
* with kcps and clock source
*
* %SKL_TKN_U32_ASTATE_COUNT: Number of valid entries in A-State table
*
* %SKL_TKN_U32_ASTATE_KCPS: Specifies the core load threshold (in kilo
* cycles per second) below which DSP is clocked
* from source specified by clock source.
*
* %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry
*
* %SKL_TKN_U32_FMT_CFG_IDX: Format config index
*
* module_id and loadable flags dont have tokens as these values will be
* read from the DSP FW manifest
*
* Tokens defined can be used either in the manifest or widget private data.
*
* SKL_TKN_MM is used as a suffix for all tokens that represent
* module data in the manifest.
*/
enum SKL_TKNS {
SKL_TKN_UUID = 1,
SKL_TKN_U8_NUM_BLOCKS,
SKL_TKN_U8_BLOCK_TYPE,
SKL_TKN_U8_IN_PIN_TYPE,
SKL_TKN_U8_OUT_PIN_TYPE,
SKL_TKN_U8_DYN_IN_PIN,
SKL_TKN_U8_DYN_OUT_PIN,
SKL_TKN_U8_IN_QUEUE_COUNT,
SKL_TKN_U8_OUT_QUEUE_COUNT,
SKL_TKN_U8_TIME_SLOT,
SKL_TKN_U8_CORE_ID,
SKL_TKN_U8_MOD_TYPE,
SKL_TKN_U8_CONN_TYPE,
SKL_TKN_U8_DEV_TYPE,
SKL_TKN_U8_HW_CONN_TYPE,
SKL_TKN_U16_MOD_INST_ID,
SKL_TKN_U16_BLOCK_SIZE,
SKL_TKN_U32_MAX_MCPS,
SKL_TKN_U32_MEM_PAGES,
SKL_TKN_U32_OBS,
SKL_TKN_U32_IBS,
SKL_TKN_U32_VBUS_ID,
SKL_TKN_U32_PARAMS_FIXUP,
SKL_TKN_U32_CONVERTER,
SKL_TKN_U32_PIPE_ID,
SKL_TKN_U32_PIPE_CONN_TYPE,
SKL_TKN_U32_PIPE_PRIORITY,
SKL_TKN_U32_PIPE_MEM_PGS,
SKL_TKN_U32_DIR_PIN_COUNT,
SKL_TKN_U32_FMT_CH,
SKL_TKN_U32_FMT_FREQ,
SKL_TKN_U32_FMT_BIT_DEPTH,
SKL_TKN_U32_FMT_SAMPLE_SIZE,
SKL_TKN_U32_FMT_CH_CONFIG,
SKL_TKN_U32_FMT_INTERLEAVE,
SKL_TKN_U32_FMT_SAMPLE_TYPE,
SKL_TKN_U32_FMT_CH_MAP,
SKL_TKN_U32_PIN_MOD_ID,
SKL_TKN_U32_PIN_INST_ID,
SKL_TKN_U32_MOD_SET_PARAMS,
SKL_TKN_U32_MOD_PARAM_ID,
SKL_TKN_U32_CAPS_SET_PARAMS,
SKL_TKN_U32_CAPS_PARAMS_ID,
SKL_TKN_U32_CAPS_SIZE,
SKL_TKN_U32_PROC_DOMAIN,
SKL_TKN_U32_LIB_COUNT,
SKL_TKN_STR_LIB_NAME,
SKL_TKN_U32_PMODE,
SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */
SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS,
SKL_TKN_U32_DMA_BUF_SIZE,
SKL_TKN_U32_PIPE_DIRECTION,
SKL_TKN_U32_PIPE_CONFIG_ID,
SKL_TKN_U32_NUM_CONFIGS,
SKL_TKN_U32_PATH_MEM_PGS,
SKL_TKN_U32_CFG_FREQ,
SKL_TKN_U8_CFG_CHAN,
SKL_TKN_U8_CFG_BPS,
SKL_TKN_CFG_MOD_RES_ID,
SKL_TKN_CFG_MOD_FMT_ID,
SKL_TKN_U8_NUM_MOD,
SKL_TKN_MM_U8_MOD_IDX,
SKL_TKN_MM_U8_NUM_RES,
SKL_TKN_MM_U8_NUM_INTF,
SKL_TKN_MM_U32_RES_ID,
SKL_TKN_MM_U32_CPS,
SKL_TKN_MM_U32_DMA_SIZE,
SKL_TKN_MM_U32_CPC,
SKL_TKN_MM_U32_RES_PIN_ID,
SKL_TKN_MM_U32_INTF_PIN_ID,
SKL_TKN_MM_U32_PIN_BUF,
SKL_TKN_MM_U32_FMT_ID,
SKL_TKN_MM_U32_NUM_IN_FMT,
SKL_TKN_MM_U32_NUM_OUT_FMT,
SKL_TKN_U32_ASTATE_IDX,
SKL_TKN_U32_ASTATE_COUNT,
SKL_TKN_U32_ASTATE_KCPS,
SKL_TKN_U32_ASTATE_CLK_SRC,
SKL_TKN_U32_FMT_CFG_IDX = 96,
SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX,
};
#endif