https://github.com/torvalds/linux
Raw File
Tip revision: d8c3291c73b958243b33f8509d4507e76dafd055 authored by Linus Torvalds on 11 May 2006, 23:31:53 UTC
Linux v2.6.17-rc4
Tip revision: d8c3291
estimator.c
/*
 * net/sched/estimator.c	Simple rate estimator.
 *
 *		This program is free software; you can redistribute it and/or
 *		modify it under the terms of the GNU General Public License
 *		as published by the Free Software Foundation; either version
 *		2 of the License, or (at your option) any later version.
 *
 * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
 */

#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
#include <net/sock.h>
#include <net/pkt_sched.h>

/*
   This code is NOT intended to be used for statistics collection,
   its purpose is to provide a base for statistical multiplexing
   for controlled load service.
   If you need only statistics, run a user level daemon which
   periodically reads byte counters.

   Unfortunately, rate estimation is not a very easy task.
   F.e. I did not find a simple way to estimate the current peak rate
   and even failed to formulate the problem 8)8)

   So I preferred not to built an estimator into the scheduler,
   but run this task separately.
   Ideally, it should be kernel thread(s), but for now it runs
   from timers, which puts apparent top bounds on the number of rated
   flows, has minimal overhead on small, but is enough
   to handle controlled load service, sets of aggregates.

   We measure rate over A=(1<<interval) seconds and evaluate EWMA:

   avrate = avrate*(1-W) + rate*W

   where W is chosen as negative power of 2: W = 2^(-ewma_log)

   The resulting time constant is:

   T = A/(-ln(1-W))


   NOTES.

   * The stored value for avbps is scaled by 2^5, so that maximal
     rate is ~1Gbit, avpps is scaled by 2^10.

   * Minimal interval is HZ/4=250msec (it is the greatest common divisor
     for HZ=100 and HZ=1024 8)), maximal interval
     is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
     are too expensive, longer ones can be implemented
     at user level painlessly.
 */

#define EST_MAX_INTERVAL	5

struct qdisc_estimator
{
	struct qdisc_estimator	*next;
	struct tc_stats		*stats;
	spinlock_t		*stats_lock;
	unsigned		interval;
	int			ewma_log;
	u64			last_bytes;
	u32			last_packets;
	u32			avpps;
	u32			avbps;
};

struct qdisc_estimator_head
{
	struct timer_list	timer;
	struct qdisc_estimator	*list;
};

static struct qdisc_estimator_head elist[EST_MAX_INTERVAL+1];

/* Estimator array lock */
static DEFINE_RWLOCK(est_lock);

static void est_timer(unsigned long arg)
{
	int idx = (int)arg;
	struct qdisc_estimator *e;

	read_lock(&est_lock);
	for (e = elist[idx].list; e; e = e->next) {
		struct tc_stats *st = e->stats;
		u64 nbytes;
		u32 npackets;
		u32 rate;

		spin_lock(e->stats_lock);
		nbytes = st->bytes;
		npackets = st->packets;
		rate = (nbytes - e->last_bytes)<<(7 - idx);
		e->last_bytes = nbytes;
		e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
		st->bps = (e->avbps+0xF)>>5;

		rate = (npackets - e->last_packets)<<(12 - idx);
		e->last_packets = npackets;
		e->avpps += ((long)rate - (long)e->avpps) >> e->ewma_log;
		e->stats->pps = (e->avpps+0x1FF)>>10;
		spin_unlock(e->stats_lock);
	}

	mod_timer(&elist[idx].timer, jiffies + ((HZ<<idx)/4));
	read_unlock(&est_lock);
}

int qdisc_new_estimator(struct tc_stats *stats, spinlock_t *stats_lock, struct rtattr *opt)
{
	struct qdisc_estimator *est;
	struct tc_estimator *parm = RTA_DATA(opt);

	if (RTA_PAYLOAD(opt) < sizeof(*parm))
		return -EINVAL;

	if (parm->interval < -2 || parm->interval > 3)
		return -EINVAL;

	est = kmalloc(sizeof(*est), GFP_KERNEL);
	if (est == NULL)
		return -ENOBUFS;

	memset(est, 0, sizeof(*est));
	est->interval = parm->interval + 2;
	est->stats = stats;
	est->stats_lock = stats_lock;
	est->ewma_log = parm->ewma_log;
	est->last_bytes = stats->bytes;
	est->avbps = stats->bps<<5;
	est->last_packets = stats->packets;
	est->avpps = stats->pps<<10;

	est->next = elist[est->interval].list;
	if (est->next == NULL) {
		init_timer(&elist[est->interval].timer);
		elist[est->interval].timer.data = est->interval;
		elist[est->interval].timer.expires = jiffies + ((HZ<<est->interval)/4);
		elist[est->interval].timer.function = est_timer;
		add_timer(&elist[est->interval].timer);
	}
	write_lock_bh(&est_lock);
	elist[est->interval].list = est;
	write_unlock_bh(&est_lock);
	return 0;
}

void qdisc_kill_estimator(struct tc_stats *stats)
{
	int idx;
	struct qdisc_estimator *est, **pest;

	for (idx=0; idx <= EST_MAX_INTERVAL; idx++) {
		int killed = 0;
		pest = &elist[idx].list;
		while ((est=*pest) != NULL) {
			if (est->stats != stats) {
				pest = &est->next;
				continue;
			}

			write_lock_bh(&est_lock);
			*pest = est->next;
			write_unlock_bh(&est_lock);

			kfree(est);
			killed++;
		}
		if (killed && elist[idx].list == NULL)
			del_timer(&elist[idx].timer);
	}
}

EXPORT_SYMBOL(qdisc_kill_estimator);
EXPORT_SYMBOL(qdisc_new_estimator);
back to top