https://jxself.org/git/linux-libre.git
Tip revision: 6922469a7b5dc59c238253a4ab4cead1e90789f6 authored by Jason Self on 07 May 2012, 16:02:43 UTC
Linux-libre 3.0.31-gnu1
Linux-libre 3.0.31-gnu1
Tip revision: 6922469
pc300too.c
/*
* Cyclades PC300 synchronous serial card driver for Linux
*
* Copyright (C) 2000-2008 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
*
* Sources of information:
* Hitachi HD64572 SCA-II User's Manual
* Original Cyclades PC300 Linux driver
*
* This driver currently supports only PC300/RSV (V.24/V.35) and
* PC300/X21 cards.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "hd64572.h"
#undef DEBUG_PKT
#define DEBUG_RINGS
#define PC300_PLX_SIZE 0x80 /* PLX control window size (128 B) */
#define PC300_SCA_SIZE 0x400 /* SCA window size (1 KB) */
#define MAX_TX_BUFFERS 10
static int pci_clock_freq = 33000000;
static int use_crystal_clock = 0;
static unsigned int CLOCK_BASE;
/* Masks to access the init_ctrl PLX register */
#define PC300_CLKSEL_MASK (0x00000004UL)
#define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
#define PC300_CTYPE_MASK (0x00000800UL)
enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
/*
* PLX PCI9050-1 local configuration and shared runtime registers.
* This structure can be used to access 9050 registers (memory mapped).
*/
typedef struct {
u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
u32 loc_rom_range; /* 10h : Local ROM Range */
u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
u32 loc_rom_base; /* 24h : Local ROM Base */
u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
}plx9050;
typedef struct port_s {
struct napi_struct napi;
struct net_device *netdev;
struct card_s *card;
spinlock_t lock; /* TX lock */
sync_serial_settings settings;
int rxpart; /* partial frame received, next frame invalid*/
unsigned short encoding;
unsigned short parity;
unsigned int iface;
u16 rxin; /* rx ring buffer 'in' pointer */
u16 txin; /* tx ring buffer 'in' and 'last' pointers */
u16 txlast;
u8 rxs, txs, tmc; /* SCA registers */
u8 chan; /* physical port # - 0 or 1 */
}port_t;
typedef struct card_s {
int type; /* RSV, X21, etc. */
int n_ports; /* 1 or 2 ports */
u8 __iomem *rambase; /* buffer memory base (virtual) */
u8 __iomem *scabase; /* SCA memory base (virtual) */
plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
u16 rx_ring_buffers; /* number of buffers in a ring */
u16 tx_ring_buffers;
u16 buff_offset; /* offset of first buffer of first channel */
u8 irq; /* interrupt request level */
port_t ports[2];
}card_t;
#define get_port(card, port) ((port) < (card)->n_ports ? \
(&(card)->ports[port]) : (NULL))
#include "hd64572.c"
static void pc300_set_iface(port_t *port)
{
card_t *card = port->card;
u32 __iomem * init_ctrl = &card->plxbase->init_ctrl;
u16 msci = get_msci(port);
u8 rxs = port->rxs & CLK_BRG_MASK;
u8 txs = port->txs & CLK_BRG_MASK;
sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
port->card);
switch(port->settings.clock_type) {
case CLOCK_INT:
rxs |= CLK_BRG; /* BRG output */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
break;
case CLOCK_TXINT:
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
break;
case CLOCK_TXFROMRX:
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
break;
default: /* EXTernal clock */
rxs |= CLK_LINE; /* RXC input */
txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
break;
}
port->rxs = rxs;
port->txs = txs;
sca_out(rxs, msci + RXS, card);
sca_out(txs, msci + TXS, card);
sca_set_port(port);
if (port->card->type == PC300_RSV) {
if (port->iface == IF_IFACE_V35)
writel(card->init_ctrl_value |
PC300_CHMEDIA_MASK(port->chan), init_ctrl);
else
writel(card->init_ctrl_value &
~PC300_CHMEDIA_MASK(port->chan), init_ctrl);
}
}
static int pc300_open(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
int result = hdlc_open(dev);
if (result)
return result;
sca_open(dev);
pc300_set_iface(port);
return 0;
}
static int pc300_close(struct net_device *dev)
{
sca_close(dev);
hdlc_close(dev);
return 0;
}
static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
const size_t size = sizeof(sync_serial_settings);
sync_serial_settings new_line;
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
int new_type;
port_t *port = dev_to_port(dev);
#ifdef DEBUG_RINGS
if (cmd == SIOCDEVPRIVATE) {
sca_dump_rings(dev);
return 0;
}
#endif
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);
if (ifr->ifr_settings.type == IF_GET_IFACE) {
ifr->ifr_settings.type = port->iface;
if (ifr->ifr_settings.size < size) {
ifr->ifr_settings.size = size; /* data size wanted */
return -ENOBUFS;
}
if (copy_to_user(line, &port->settings, size))
return -EFAULT;
return 0;
}
if (port->card->type == PC300_X21 &&
(ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
ifr->ifr_settings.type == IF_IFACE_X21))
new_type = IF_IFACE_X21;
else if (port->card->type == PC300_RSV &&
(ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
ifr->ifr_settings.type == IF_IFACE_V35))
new_type = IF_IFACE_V35;
else if (port->card->type == PC300_RSV &&
ifr->ifr_settings.type == IF_IFACE_V24)
new_type = IF_IFACE_V24;
else
return hdlc_ioctl(dev, ifr, cmd);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&new_line, line, size))
return -EFAULT;
if (new_line.clock_type != CLOCK_EXT &&
new_line.clock_type != CLOCK_TXFROMRX &&
new_line.clock_type != CLOCK_INT &&
new_line.clock_type != CLOCK_TXINT)
return -EINVAL; /* No such clock setting */
if (new_line.loopback != 0 && new_line.loopback != 1)
return -EINVAL;
memcpy(&port->settings, &new_line, size); /* Update settings */
port->iface = new_type;
pc300_set_iface(port);
return 0;
}
static void pc300_pci_remove_one(struct pci_dev *pdev)
{
int i;
card_t *card = pci_get_drvdata(pdev);
for (i = 0; i < 2; i++)
if (card->ports[i].card)
unregister_hdlc_device(card->ports[i].netdev);
if (card->irq)
free_irq(card->irq, card);
if (card->rambase)
iounmap(card->rambase);
if (card->scabase)
iounmap(card->scabase);
if (card->plxbase)
iounmap(card->plxbase);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
if (card->ports[0].netdev)
free_netdev(card->ports[0].netdev);
if (card->ports[1].netdev)
free_netdev(card->ports[1].netdev);
kfree(card);
}
static const struct net_device_ops pc300_ops = {
.ndo_open = pc300_open,
.ndo_stop = pc300_close,
.ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = pc300_ioctl,
};
static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
card_t *card;
u32 __iomem *p;
int i;
u32 ramsize;
u32 ramphys; /* buffer memory base */
u32 scaphys; /* SCA memory base */
u32 plxphys; /* PLX registers memory base */
i = pci_enable_device(pdev);
if (i)
return i;
i = pci_request_regions(pdev, "PC300");
if (i) {
pci_disable_device(pdev);
return i;
}
card = kzalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
printk(KERN_ERR "pc300: unable to allocate memory\n");
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
}
pci_set_drvdata(pdev, card);
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
card->rambase = pci_ioremap_bar(pdev, 3);
if (card->plxbase == NULL ||
card->scabase == NULL ||
card->rambase == NULL) {
printk(KERN_ERR "pc300: ioremap() failed\n");
pc300_pci_remove_one(pdev);
}
/* PLX PCI 9050 workaround for local configuration register read bug */
pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
card->init_ctrl_value = readl(&((plx9050 __iomem *)card->scabase)->init_ctrl);
pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
pdev->device == PCI_DEVICE_ID_PC300_TE_2)
card->type = PC300_TE; /* not fully supported */
else if (card->init_ctrl_value & PC300_CTYPE_MASK)
card->type = PC300_X21;
else
card->type = PC300_RSV;
if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
pdev->device == PCI_DEVICE_ID_PC300_TE_1)
card->n_ports = 1;
else
card->n_ports = 2;
for (i = 0; i < card->n_ports; i++)
if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
printk(KERN_ERR "pc300: unable to allocate memory\n");
pc300_pci_remove_one(pdev);
return -ENOMEM;
}
/* Reset PLX */
p = &card->plxbase->init_ctrl;
writel(card->init_ctrl_value | 0x40000000, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
writel(card->init_ctrl_value, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
/* Reload Config. Registers from EEPROM */
writel(card->init_ctrl_value | 0x20000000, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
writel(card->init_ctrl_value, p);
readl(p); /* Flush the write - do not use sca_flush */
udelay(1);
ramsize = sca_detect_ram(card, card->rambase,
pci_resource_len(pdev, 3));
if (use_crystal_clock)
card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
else
card->init_ctrl_value |= PC300_CLKSEL_MASK;
writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
/* number of TX + RX buffers for one port */
i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
card->rx_ring_buffers = i - card->tx_ring_buffers;
card->buff_offset = card->n_ports * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
"using %u TX + %u RX packets rings\n",
card->type == PC300_X21 ? "X21" :
card->type == PC300_TE ? "TE" : "RSV",
ramsize / 1024, ramphys, pdev->irq,
card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
printk(KERN_ERR "pc300: RAM test failed\n");
pc300_pci_remove_one(pdev);
return -EFAULT;
}
/* Enable interrupts on the PCI bridge, LINTi1 active low */
writew(0x0041, &card->plxbase->intr_ctrl_stat);
/* Allocate IRQ */
if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pc300", card)) {
printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
pdev->irq);
pc300_pci_remove_one(pdev);
return -EBUSY;
}
card->irq = pdev->irq;
sca_init(card, 0);
// COTE not set - allows better TX DMA settings
// sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
sca_out(0x10, BTCR, card);
for (i = 0; i < card->n_ports; i++) {
port_t *port = &card->ports[i];
struct net_device *dev = port->netdev;
hdlc_device *hdlc = dev_to_hdlc(dev);
port->chan = i;
spin_lock_init(&port->lock);
dev->irq = card->irq;
dev->mem_start = ramphys;
dev->mem_end = ramphys + ramsize - 1;
dev->tx_queue_len = 50;
dev->netdev_ops = &pc300_ops;
hdlc->attach = sca_attach;
hdlc->xmit = sca_xmit;
port->settings.clock_type = CLOCK_EXT;
port->card = card;
if (card->type == PC300_X21)
port->iface = IF_IFACE_X21;
else
port->iface = IF_IFACE_V35;
sca_init_port(port);
if (register_hdlc_device(dev)) {
printk(KERN_ERR "pc300: unable to register hdlc "
"device\n");
port->card = NULL;
pc300_pci_remove_one(pdev);
return -ENOBUFS;
}
printk(KERN_INFO "%s: PC300 channel %d\n",
dev->name, port->chan);
}
return 0;
}
static DEFINE_PCI_DEVICE_TABLE(pc300_pci_tbl) = {
{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
static struct pci_driver pc300_pci_driver = {
.name = "PC300",
.id_table = pc300_pci_tbl,
.probe = pc300_pci_init_one,
.remove = pc300_pci_remove_one,
};
static int __init pc300_init_module(void)
{
if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
return -EINVAL;
}
if (use_crystal_clock != 0 && use_crystal_clock != 1) {
printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
return -EINVAL;
}
CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
return pci_register_driver(&pc300_pci_driver);
}
static void __exit pc300_cleanup_module(void)
{
pci_unregister_driver(&pc300_pci_driver);
}
MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
module_param(pci_clock_freq, int, 0444);
MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
module_param(use_crystal_clock, int, 0444);
MODULE_PARM_DESC(use_crystal_clock,
"Use 24.576 MHz clock instead of PCI clock");
module_init(pc300_init_module);
module_exit(pc300_cleanup_module);