https://github.com/CFMIP/COSPv1
Tip revision: 08f4cce0cde8431403f71ff8fa2c8b5ba7232e29 authored by dustinswales on 17 September 2018, 18:01:01 UTC
Merge pull request #4 from CFMIP/modisLidarBugFix
Merge pull request #4 from CFMIP/modisLidarBugFix
Tip revision: 08f4cce
cosp_types.F90
! (c) British Crown Copyright 2008, the Met Office.
! All rights reserved.
!
! Redistribution and use in source and binary forms, with or without modification, are permitted
! provided that the following conditions are met:
!
! * Redistributions of source code must retain the above copyright notice, this list
! of conditions and the following disclaimer.
! * Redistributions in binary form must reproduce the above copyright notice, this list
! of conditions and the following disclaimer in the documentation and/or other materials
! provided with the distribution.
! * Neither the name of the Met Office nor the names of its contributors may be used
! to endorse or promote products derived from this software without specific prior written
! permission.
!
! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
MODULE MOD_COSP_TYPES
USE MOD_COSP_CONSTANTS
USE MOD_COSP_UTILS
use radar_simulator_types, only: class_param, nd, mt_nd, dmax, dmin
IMPLICIT NONE
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!----------------------- DERIVED TYPES ----------------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
! Configuration choices (simulators, variables)
TYPE COSP_CONFIG
logical :: Lradar_sim,Llidar_sim,Lisccp_sim,Lmodis_sim,Lmisr_sim,Lrttov_sim,Lstats,Lwrite_output, &
Lalbisccp,Latb532,Lboxptopisccp,Lboxtauisccp,LcfadDbze94, &
LcfadLidarsr532,Lclcalipso2,Lclcalipso,Lclhcalipso,Lclisccp,Lcllcalipso, &
Lclmcalipso,Lcltcalipso,Lcltlidarradar,Lpctisccp,Ldbze94,Ltauisccp,Lcltisccp, &
Ltoffset,LparasolRefl,LclMISR,Lmeantbisccp,Lmeantbclrisccp, &
Lclcalipsoliq,Lclcalipsoice,Lclcalipsoun, &
Lclcalipsotmp,Lclcalipsotmpliq,Lclcalipsotmpice,Lclcalipsotmpun, &
Lcltcalipsoliq,Lcltcalipsoice,Lcltcalipsoun, &
Lclhcalipsoliq,Lclhcalipsoice,Lclhcalipsoun, &
Lclmcalipsoliq,Lclmcalipsoice,Lclmcalipsoun, &
Lcllcalipsoliq,Lcllcalipsoice,Lcllcalipsoun, &
Lfracout,LlidarBetaMol532,Ltbrttov, &
Lcltmodis,Lclwmodis,Lclimodis,Lclhmodis,Lclmmodis,Lcllmodis,Ltautmodis,Ltauwmodis,Ltauimodis,Ltautlogmodis, &
Ltauwlogmodis,Ltauilogmodis,Lreffclwmodis,Lreffclimodis,Lpctmodis,Llwpmodis, &
Liwpmodis,Lclmodis,Lcrimodis,Lcrlmodis
character(len=32) :: out_list(N_OUT_LIST)
END TYPE COSP_CONFIG
! Outputs from RTTOV
TYPE COSP_RTTOV
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Nchan ! Number of channels
! Brightness temperatures (Npoints,Nchan)
real,pointer :: tbs(:,:)
END TYPE COSP_RTTOV
! Outputs from MISR simulator
TYPE COSP_MISR
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ntau ! Number of tau intervals
integer :: Nlevels ! Number of cth levels
! --- (npoints,ntau,nlevels)
! the fraction of the model grid box covered by each of the MISR cloud types
real,pointer :: fq_MISR(:,:,:)
! --- (npoints)
real,pointer :: MISR_meanztop(:), MISR_cldarea(:)
! --- (npoints,nlevels)
real,pointer :: MISR_dist_model_layertops(:,:)
END TYPE COSP_MISR
! Outputs from ISCCP simulator
TYPE COSP_ISCCP
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ncolumns ! Number of columns
integer :: Nlevels ! Number of levels
! --- (npoints,tau=7,pressure=7)
! the fraction of the model grid box covered by each of the 49 ISCCP D level cloud types
real,pointer :: fq_isccp(:,:,:)
! --- (npoints) ---
! The fraction of model grid box columns with cloud somewhere in them.
! This should equal the sum over all entries of fq_isccp
real,pointer :: totalcldarea(:)
! mean all-sky 10.5 micron brightness temperature
real,pointer :: meantb(:)
! mean clear-sky 10.5 micron brightness temperature
real,pointer :: meantbclr(:)
! The following three means are averages over the cloudy areas only. If no
! clouds are in grid box all three quantities should equal zero.
! mean cloud top pressure (mb) - linear averaging in cloud top pressure.
real,pointer :: meanptop(:)
! mean optical thickness linear averaging in albedo performed.
real,pointer :: meantaucld(:)
! mean cloud albedo. linear averaging in albedo performed
real,pointer :: meanalbedocld(:)
!--- (npoints,ncol) ---
! optical thickness in each column
real,pointer :: boxtau(:,:)
! cloud top pressure (mb) in each column
real,pointer :: boxptop(:,:)
END TYPE COSP_ISCCP
! Summary statistics from radar
TYPE COSP_VGRID
logical :: use_vgrid ! Logical flag that indicates change of grid
logical :: csat_vgrid ! Flag for Cloudsat grid
integer :: Npoints ! Number of sampled points
integer :: Ncolumns ! Number of subgrid columns
integer :: Nlevels ! Number of model levels
integer :: Nlvgrid ! Number of levels of new grid
! Array with dimensions (Nlvgrid)
real, dimension(:), pointer :: z,zl,zu ! Height and lower and upper boundaries of new levels
! Array with dimensions (Nlevels)
real, dimension(:), pointer :: mz,mzl,mzu ! Height and lower and upper boundaries of model levels
END TYPE COSP_VGRID
! Output data from lidar code
TYPE COSP_SGLIDAR
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ncolumns ! Number of columns
integer :: Nlevels ! Number of levels
integer :: Nhydro ! Number of hydrometeors
integer :: Nrefl ! Number of parasol reflectances
! Arrays with dimensions (Npoints,Nlevels)
real,dimension(:,:),pointer :: beta_mol ! Molecular backscatter
real,dimension(:,:),pointer :: temp_tot
! Arrays with dimensions (Npoints,Ncolumns,Nlevels)
real,dimension(:,:,:),pointer :: betaperp_tot ! Total backscattered signal
real,dimension(:,:,:),pointer :: beta_tot ! Total backscattered signal
real,dimension(:,:,:),pointer :: tau_tot ! Optical thickness integrated from top to level z
! Arrays with dimensions (Npoints,Ncolumns,Nrefl)
real,dimension(:,:,:),pointer :: refl ! parasol reflectances
END TYPE COSP_SGLIDAR
! Output data from radar code
TYPE COSP_SGRADAR
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ncolumns ! Number of columns
integer :: Nlevels ! Number of levels
integer :: Nhydro ! Number of hydrometeors
! output vertical levels: spaceborne radar -> from TOA to SURFACE
! Arrays with dimensions (Npoints,Nlevels)
real,dimension(:,:),pointer :: att_gas ! 2-way attenuation by gases [dBZ]
! Arrays with dimensions (Npoints,Ncolumns,Nlevels)
real,dimension(:,:,:),pointer :: Ze_tot ! Effective reflectivity factor [dBZ]
END TYPE COSP_SGRADAR
! Summary statistics from radar
TYPE COSP_RADARSTATS
integer :: Npoints ! Number of sampled points
integer :: Ncolumns ! Number of subgrid columns
integer :: Nlevels ! Number of model levels
integer :: Nhydro ! Number of hydrometeors
! Array with dimensions (Npoints,dBZe_bins,Nlevels)
real, dimension(:,:,:), pointer :: cfad_ze ! Ze CFAD
! Array with dimensions (Npoints)
real,dimension(:),pointer :: radar_lidar_tcc ! Radar&lidar total cloud amount, grid-box scale
! Arrays with dimensions (Npoints,Nlevels)
real, dimension(:,:),pointer :: lidar_only_freq_cloud
END TYPE COSP_RADARSTATS
! Summary statistics from lidar
TYPE COSP_LIDARSTATS
integer :: Npoints ! Number of sampled points
integer :: Ncolumns ! Number of subgrid columns
integer :: Nlevels ! Number of model levels
integer :: Nhydro ! Number of hydrometeors
integer :: Nrefl ! Number of parasol reflectances
! Arrays with dimensions (SR_BINS)
real, dimension(:),pointer :: srbval ! SR bins in cfad_sr
! Arrays with dimensions (Npoints,SR_BINS,Nlevels)
real, dimension(:,:,:),pointer :: cfad_sr ! CFAD of scattering ratio
! Arrays with dimensions (Npoints,Nlevels)
real, dimension(:,:),pointer :: lidarcld ! 3D "lidar" cloud fraction
! Arrays with dimensions (Npoints,LIDAR_NCAT)
real, dimension(:,:),pointer :: cldlayer ! low, mid, high-level, total lidar cloud cover
! Arrays with dimensions (Npoints,Nlevels,Nphase)
real, dimension(:,:,:),pointer :: lidarcldphase ! 3D "lidar" phase cloud fraction
! Arrays with dimensions (Npoints,LIDAR_NCAT,Nphase)
real, dimension(:,:,:),pointer :: cldlayerphase ! low, mid, high-level lidar phase cloud cover
! Arrays with dimensions (Npoints,Ntemps,Nphase)
real, dimension(:,:,:),pointer :: lidarcldtmp ! 3D "lidar" phase cloud temperature
! Arrays with dimensions (Npoints,PARASOL_NREFL)
real, dimension(:,:),pointer :: parasolrefl ! mean parasol reflectance
END TYPE COSP_LIDARSTATS
! Input data for simulator. Subgrid scale.
! Input data from SURFACE to TOA
TYPE COSP_SUBGRID
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ncolumns ! Number of columns
integer :: Nlevels ! Number of levels
integer :: Nhydro ! Number of hydrometeors
real,dimension(:,:,:),pointer :: prec_frac ! Subgrid precip array. Dimensions (Npoints,Ncolumns,Nlevels)
real,dimension(:,:,:),pointer :: frac_out ! Subgrid cloud array. Dimensions (Npoints,Ncolumns,Nlevels)
END TYPE COSP_SUBGRID
! Input data for simulator at Subgrid scale.
! Used on a reduced number of points
TYPE COSP_SGHYDRO
! Dimensions
integer :: Npoints ! Number of gridpoints
integer :: Ncolumns ! Number of columns
integer :: Nlevels ! Number of levels
integer :: Nhydro ! Number of hydrometeors
real,dimension(:,:,:,:),pointer :: mr_hydro ! Mixing ratio of each hydrometeor
! (Npoints,Ncolumns,Nlevels,Nhydro) [kg/kg]
real,dimension(:,:,:,:),pointer :: Reff ! Effective Radius of each hydrometeor
! (Reff==0 means use default size)
! (Npoints,Ncolumns,Nlevels,Nhydro) [m]
real,dimension(:,:,:,:),pointer :: Np ! Total # concentration each hydrometeor
! (Optional, ignored if Reff > 0).
! (Npoints,Ncolumns,Nlevels,Nhydro) [#/kg]
! Np = Ntot / rho_a = [#/m^3] / [kg/m^3)
! added by Roj with Quickbeam V3
END TYPE COSP_SGHYDRO
! Input data for simulator. Gridbox scale.
TYPE COSP_GRIDBOX
! Scalars and dimensions
integer :: Npoints ! Number of gridpoints
integer :: Nlevels ! Number of levels
integer :: Ncolumns ! Number of columns
integer :: Nhydro ! Number of hydrometeors
integer :: Nprmts_max_hydro ! Max number of parameters for hydrometeor size distributions
integer :: Naero ! Number of aerosol species
integer :: Nprmts_max_aero ! Max number of parameters for aerosol size distributions
integer :: Npoints_it ! Max number of gridpoints to be processed in one iteration
! Time [days]
double precision :: time
double precision :: time_bnds(2)
! Radar ancillary info
real :: radar_freq, & ! Radar frequency [GHz]
k2 ! |K|^2, -1=use frequency dependent default
integer :: surface_radar, & ! surface=1, spaceborne=0
use_mie_tables, & ! use a precomputed loopup table? yes=1,no=0
use_gas_abs, & ! include gaseous absorption? yes=1,no=0
do_ray, & ! calculate/output Rayleigh refl=1, not=0
melt_lay ! melting layer model off=0, on=1
! structures used by radar simulator that need to be set only ONCE per radar configuration (e.g. freq, pointing direction) ... added by roj Feb 2008
type(class_param) :: hp ! structure used by radar simulator to store Ze and N scaling constants and other information
integer :: nsizes ! number of discrete drop sizes (um) used to represent the distribution
! Lidar
integer :: lidar_ice_type !ice particle shape hypothesis in lidar calculations
!(ice_type=0 for spheres, ice_type=1 for non spherical particles)
! Radar
logical :: use_precipitation_fluxes ! True if precipitation fluxes are input to the algorithm
logical :: use_reff ! True if Reff is to be used by radar (memory not allocated
! Geolocation (Npoints)
real,dimension(:),pointer :: toffset ! Time offset of esch point from the value in time
real,dimension(:),pointer :: longitude ! longitude [degrees East]
real,dimension(:),pointer :: latitude ! latitude [deg North]
! Gridbox information (Npoints,Nlevels)
real,dimension(:,:),pointer :: zlev ! Height of model levels [m]
real,dimension(:,:),pointer :: zlev_half ! Height at half model levels [m] (Bottom of model layer)
real,dimension(:,:),pointer :: dlev ! Depth of model levels [m]
real,dimension(:,:),pointer :: p ! Pressure at full model levels [Pa]
real,dimension(:,:),pointer :: ph ! Pressure at half model levels [Pa]
real,dimension(:,:),pointer :: T ! Temperature at model levels [K]
real,dimension(:,:),pointer :: q ! Relative humidity to water (%)
real,dimension(:,:),pointer :: sh ! Specific humidity to water [kg/kg]
real,dimension(:,:),pointer :: dtau_s ! mean 0.67 micron optical depth of stratiform
! clouds in each model level
! NOTE: this the cloud optical depth of only the
! cloudy part of the grid box, it is not weighted
! with the 0 cloud optical depth of the clear
! part of the grid box
real,dimension(:,:),pointer :: dtau_c ! mean 0.67 micron optical depth of convective
! clouds in each model level. Same note applies as in dtau_s.
real,dimension(:,:),pointer :: dem_s ! 10.5 micron longwave emissivity of stratiform
! clouds in each model level. Same note applies as in dtau_s.
real,dimension(:,:),pointer :: dem_c ! 10.5 micron longwave emissivity of convective
! clouds in each model level. Same note applies as in dtau_s.
real,dimension(:,:),pointer :: mr_ozone ! Ozone mass mixing ratio [kg/kg]
! Point information (Npoints)
real,dimension(:),pointer :: land !Landmask [0 - Ocean, 1 - Land]
real,dimension(:),pointer :: psfc !Surface pressure [Pa]
real,dimension(:),pointer :: sunlit ! (npoints) 1 for day points, 0 for nightime
real,dimension(:),pointer :: skt ! Skin temperature (K)
real,dimension(:),pointer :: u_wind ! eastward wind [m s-1]
real,dimension(:),pointer :: v_wind ! northward wind [m s-1]
! TOTAL and CONV cloud fraction for SCOPS
real,dimension(:,:),pointer :: tca ! Total cloud fraction
real,dimension(:,:),pointer :: cca ! Convective cloud fraction
! Precipitation fluxes on model levels
real,dimension(:,:),pointer :: rain_ls ! large-scale precipitation flux of rain [kg/m2.s]
real,dimension(:,:),pointer :: rain_cv ! convective precipitation flux of rain [kg/m2.s]
real,dimension(:,:),pointer :: snow_ls ! large-scale precipitation flux of snow [kg/m2.s]
real,dimension(:,:),pointer :: snow_cv ! convective precipitation flux of snow [kg/m2.s]
real,dimension(:,:),pointer :: grpl_ls ! large-scale precipitation flux of graupel [kg/m2.s]
! Hydrometeors concentration and distribution parameters
! real,dimension(:,:,:),pointer :: fr_hydro ! Fraction of the gridbox occupied by each hydrometeor (Npoints,Nlevels,Nhydro)
real,dimension(:,:,:),pointer :: mr_hydro ! Mixing ratio of each hydrometeor (Npoints,Nlevels,Nhydro) [kg/kg]
real,dimension(:,:),pointer :: dist_prmts_hydro !Distributional parameters for hydrometeors (Nprmts_max_hydro,Nhydro)
! Effective radius [m]. (Npoints,Nlevels,Nhydro) -- OPTIONAL, value of 0 mean use fixed default
real,dimension(:,:,:),pointer :: Reff
! Total Number Concentration [#/kg]. (Npoints,Nlevels,Nhydro) -- OPTIONAL, value of 0 mean use fixed default
real,dimension(:,:,:),pointer :: Np ! added by Roj with Quickbeam V3
! Aerosols concentration and distribution parameters
real,dimension(:,:,:),pointer :: conc_aero ! Aerosol concentration for each species (Npoints,Nlevels,Naero)
integer,dimension(:),pointer :: dist_type_aero ! Particle size distribution type for each aerosol species (Naero)
real,dimension(:,:,:,:),pointer :: dist_prmts_aero ! Distributional parameters for aerosols
! (Npoints,Nlevels,Nprmts_max_aero,Naero)
! ISCCP simulator inputs
integer :: isccp_top_height ! 1 = adjust top height using both a computed
! infrared brightness temperature and the visible
! optical depth to adjust cloud top pressure. Note
! that this calculation is most appropriate to compare
! to ISCCP data during sunlit hours.
! 2 = do not adjust top height, that is cloud top
! pressure is the actual cloud top pressure
! in the model
! 3 = adjust top height using only the computed
! infrared brightness temperature. Note that this
! calculation is most appropriate to compare to ISCCP
! IR only algortihm (i.e. you can compare to nighttime
! ISCCP data with this option)
integer :: isccp_top_height_direction ! direction for finding atmosphere pressure level
! with interpolated temperature equal to the radiance
! determined cloud-top temperature
! 1 = find the *lowest* altitude (highest pressure) level
! with interpolated temperature equal to the radiance
! determined cloud-top temperature
! 2 = find the *highest* altitude (lowest pressure) level
! with interpolated temperature equal to the radiance
! determined cloud-top temperature
! ONLY APPLICABLE IF top_height EQUALS 1 or 3
! 1 = default setting, and matches all versions of
! ISCCP simulator with versions numbers 3.5.1 and lower
! 2 = experimental setting
integer :: isccp_overlap ! overlap type (1=max, 2=rand, 3=max/rand)
real :: isccp_emsfc_lw ! 10.5 micron emissivity of surface (fraction)
! RTTOV inputs/options
integer :: plat ! satellite platform
integer :: sat ! satellite
integer :: inst ! instrument
integer :: Nchan ! Number of channels to be computed
integer, dimension(:), pointer :: Ichan ! Channel numbers
real, dimension(:), pointer :: Surfem ! Surface emissivity
real :: ZenAng ! Satellite Zenith Angles
real :: co2,ch4,n2o,co ! Mixing ratios of trace gases
END TYPE COSP_GRIDBOX
CONTAINS
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_RTTOV -------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_RTTOV(cfg,Npoints,Nchan,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Nchan ! Number of channels
type(cosp_rttov),intent(out) :: x
! Local variables
integer :: i,j
! Allocate minumum storage if simulator not used
if (cfg%Lrttov_sim) then
i = Npoints
j = Nchan
else
i = 1
j = 1
endif
x%Npoints = i
x%Nchan = j
! --- Allocate arrays ---
allocate(x%tbs(i, j))
! --- Initialise to zero ---
x%tbs = 0.0
END SUBROUTINE CONSTRUCT_COSP_RTTOV
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_RTTOV ------------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_RTTOV(x)
type(cosp_rttov),intent(inout) :: x
! --- Deallocate arrays ---
deallocate(x%tbs)
END SUBROUTINE FREE_COSP_RTTOV
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_MISR ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_MISR(cfg,Npoints,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of gridpoints
type(cosp_misr),intent(out) :: x
! Local variables
integer :: i,j,k
! Allocate minumum storage if simulator not used
if (cfg%Lmisr_sim) then
i = Npoints
j = 7
k = MISR_N_CTH
else
i = 1
j = 1
k = 1
endif
! Dimensions
x%Npoints = i
x%Ntau = j
x%Nlevels = k
! allocate space for MISR simulator outputs ...
allocate(x%fq_MISR(i,j,k), x%MISR_meanztop(i),x%MISR_cldarea(i), x%MISR_dist_model_layertops(i,k))
x%fq_MISR = 0.0
x%MISR_meanztop = 0.0
x%MISR_cldarea = 0.0
x%MISR_dist_model_layertops = 0.0
END SUBROUTINE CONSTRUCT_COSP_MISR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_MISR ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_MISR(x)
type(cosp_misr),intent(inout) :: x
deallocate(x%fq_MISR, x%MISR_meanztop,x%MISR_cldarea, x%MISR_dist_model_layertops)
END SUBROUTINE FREE_COSP_MISR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_ISCCP ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_ISCCP(cfg,Npoints,Ncolumns,Nlevels,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Ncolumns ! Number of subgrid columns
integer,intent(in) :: Nlevels ! Number of model levels
type(cosp_isccp),intent(out) :: x
! Local variables
integer :: i,j,k
! Allocate minumum storage if simulator not used
if (cfg%Lisccp_sim) then
i = Npoints
j = Ncolumns
k = Nlevels
else
i = 1
j = 1
k = 1
endif
! Dimensions
x%Npoints = i
x%Ncolumns = j
x%Nlevels = k
! --- Allocate arrays ---
allocate(x%fq_isccp(i,7,7), x%totalcldarea(i), &
x%meanptop(i), x%meantaucld(i), &
x%meantb(i), x%meantbclr(i), &
x%boxtau(i,j), x%boxptop(i,j), &
x%meanalbedocld(i))
! --- Initialise to zero ---
x%fq_isccp = 0.0
x%totalcldarea = 0.0
x%meanptop = 0.0
x%meantaucld = 0.0
x%meantb = 0.0
x%meantbclr = 0.0
x%boxtau = 0.0
x%boxptop = 0.0
x%meanalbedocld= 0.0
END SUBROUTINE CONSTRUCT_COSP_ISCCP
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_ISCCP -----------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_ISCCP(x)
type(cosp_isccp),intent(inout) :: x
deallocate(x%fq_isccp, x%totalcldarea, &
x%meanptop, x%meantaucld, x%meantb, x%meantbclr, &
x%boxtau, x%boxptop, x%meanalbedocld)
END SUBROUTINE FREE_COSP_ISCCP
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_VGRID ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_VGRID(gbx,Nlvgrid,use_vgrid,cloudsat,x)
type(cosp_gridbox),intent(in) :: gbx ! Gridbox information
integer,intent(in) :: Nlvgrid ! Number of new levels
logical,intent(in) :: use_vgrid! Logical flag that controls the output on a different grid
logical,intent(in) :: cloudsat ! TRUE if a CloudSat like grid (480m) is requested
type(cosp_vgrid),intent(out) :: x
! Local variables
integer :: i
real :: zstep
x%use_vgrid = use_vgrid
x%csat_vgrid = cloudsat
! Dimensions
x%Npoints = gbx%Npoints
x%Ncolumns = gbx%Ncolumns
x%Nlevels = gbx%Nlevels
! --- Allocate arrays ---
if (use_vgrid) then
x%Nlvgrid = Nlvgrid
else
x%Nlvgrid = gbx%Nlevels
endif
allocate(x%z(x%Nlvgrid),x%zl(x%Nlvgrid),x%zu(x%Nlvgrid))
allocate(x%mz(x%Nlevels),x%mzl(x%Nlevels),x%mzu(x%Nlevels))
! --- Model vertical levels ---
! Use height levels of first model gridbox
x%mz = gbx%zlev(1,:)
x%mzl = gbx%zlev_half(1,:)
x%mzu(1:x%Nlevels-1) = gbx%zlev_half(1,2:x%Nlevels)
x%mzu(x%Nlevels) = gbx%zlev(1,x%Nlevels) + (gbx%zlev(1,x%Nlevels) - x%mzl(x%Nlevels))
if (use_vgrid) then
! --- Initialise to zero ---
x%z = 0.0
x%zl = 0.0
x%zu = 0.0
if (cloudsat) then ! --- CloudSat grid requested ---
zstep = 480.0
else
! Other grid requested. Constant vertical spacing with top at 20 km
zstep = 20000.0/x%Nlvgrid
endif
do i=1,x%Nlvgrid
x%zl(i) = (i-1)*zstep
x%zu(i) = i*zstep
enddo
x%z = (x%zl + x%zu)/2.0
else
x%z = x%mz
x%zl = x%mzl
x%zu = x%mzu
endif
END SUBROUTINE CONSTRUCT_COSP_VGRID
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------------ SUBROUTINE FREE_COSP_VGRID ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_VGRID(x)
type(cosp_vgrid),intent(inout) :: x
deallocate(x%z, x%zl, x%zu, x%mz, x%mzl, x%mzu)
END SUBROUTINE FREE_COSP_VGRID
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_SGLIDAR ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_SGLIDAR(cfg,Npoints,Ncolumns,Nlevels,Nhydro,Nrefl,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Ncolumns ! Number of subgrid columns
integer,intent(in) :: Nlevels ! Number of model levels
integer,intent(in) :: Nhydro ! Number of hydrometeors
integer,intent(in) :: Nrefl ! Number of parasol reflectances ! parasol
type(cosp_sglidar),intent(out) :: x
! Local variables
integer :: i,j,k,l,m
! Allocate minumum storage if simulator not used
if (cfg%Llidar_sim) then
i = Npoints
j = Ncolumns
k = Nlevels
l = Nhydro
m = Nrefl
else
i = 1
j = 1
k = 1
l = 1
m = 1
endif
! Dimensions
x%Npoints = i
x%Ncolumns = j
x%Nlevels = k
x%Nhydro = l
x%Nrefl = m
! --- Allocate arrays ---
allocate(x%beta_mol(i,k), x%beta_tot(i,j,k), &
x%tau_tot(i,j,k),x%refl(i,j,m), &
x%temp_tot(i,k),x%betaperp_tot(i,j,k))
! --- Initialise to zero ---
x%beta_mol = 0.0
x%beta_tot = 0.0
x%tau_tot = 0.0
x%refl = 0.0 ! parasol
x%temp_tot = 0.0
x%betaperp_tot = 0.0
END SUBROUTINE CONSTRUCT_COSP_SGLIDAR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------------ SUBROUTINE FREE_COSP_SGLIDAR ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_SGLIDAR(x)
type(cosp_sglidar),intent(inout) :: x
deallocate(x%beta_mol, x%beta_tot, x%tau_tot, x%refl, &
x%temp_tot, x%betaperp_tot)
END SUBROUTINE FREE_COSP_SGLIDAR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_SGRADAR ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_SGRADAR(cfg,Npoints,Ncolumns,Nlevels,Nhydro,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Ncolumns ! Number of subgrid columns
integer,intent(in) :: Nlevels ! Number of model levels
integer,intent(in) :: Nhydro ! Number of hydrometeors
type(cosp_sgradar),intent(out) :: x
! Local variables
integer :: i,j,k,l
if (cfg%Lradar_sim) then
i = Npoints
j = Ncolumns
k = Nlevels
l = Nhydro
else ! Allocate minumum storage if simulator not used
i = 1
j = 1
k = 1
l = 1
endif
! Dimensions
x%Npoints = i
x%Ncolumns = j
x%Nlevels = k
x%Nhydro = l
! --- Allocate arrays ---
allocate(x%att_gas(i,k), x%Ze_tot(i,j,k))
! --- Initialise to zero ---
x%att_gas = 0.0
x%Ze_tot = 0.0
! The following line give a compilation error on the Met Office NEC
! call zero_real(x%Z_hydro, x%att_hydro)
! f90: error(666): cosp_types.f90, line nnn:
! Actual argument corresponding to dummy
! argument of ELEMENTAL subroutine
! "zero_real" with INTENET(OUT) attribute
! is not array.
END SUBROUTINE CONSTRUCT_COSP_SGRADAR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------------ SUBROUTINE FREE_COSP_SGRADAR ----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_SGRADAR(x)
type(cosp_sgradar),intent(inout) :: x
deallocate(x%att_gas, x%Ze_tot)
END SUBROUTINE FREE_COSP_SGRADAR
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!----------- SUBROUTINE CONSTRUCT_COSP_RADARSTATS ---------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_RADARSTATS(cfg,Npoints,Ncolumns,Nlevels,Nhydro,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Ncolumns ! Number of subgrid columns
integer,intent(in) :: Nlevels ! Number of model levels
integer,intent(in) :: Nhydro ! Number of hydrometeors
type(cosp_radarstats),intent(out) :: x
! Local variables
integer :: i,j,k,l
! Allocate minumum storage if simulator not used
if (cfg%Lradar_sim) then
i = Npoints
j = Ncolumns
k = Nlevels
l = Nhydro
else
i = 1
j = 1
k = 1
l = 1
endif
! Dimensions
x%Npoints = i
x%Ncolumns = j
x%Nlevels = k
x%Nhydro = l
! --- Allocate arrays ---
allocate(x%cfad_ze(i,DBZE_BINS,k),x%lidar_only_freq_cloud(i,k))
allocate(x%radar_lidar_tcc(i))
! --- Initialise to zero ---
x%cfad_ze = 0.0
x%lidar_only_freq_cloud = 0.0
x%radar_lidar_tcc = 0.0
END SUBROUTINE CONSTRUCT_COSP_RADARSTATS
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------------ SUBROUTINE FREE_COSP_RADARSTATS -------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_RADARSTATS(x)
type(cosp_radarstats),intent(inout) :: x
deallocate(x%cfad_ze,x%lidar_only_freq_cloud,x%radar_lidar_tcc)
END SUBROUTINE FREE_COSP_RADARSTATS
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!----------- SUBROUTINE CONSTRUCT_COSP_LIDARSTATS ---------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_LIDARSTATS(cfg,Npoints,Ncolumns,Nlevels,Nhydro,Nrefl,x)
type(cosp_config),intent(in) :: cfg ! Configuration options
integer,intent(in) :: Npoints ! Number of sampled points
integer,intent(in) :: Ncolumns ! Number of subgrid columns
integer,intent(in) :: Nlevels ! Number of model levels
integer,intent(in) :: Nhydro ! Number of hydrometeors
integer,intent(in) :: Nrefl ! Number of parasol reflectance
type(cosp_lidarstats),intent(out) :: x
! Local variables
integer :: i,j,k,l,m
! Allocate minumum storage if simulator not used
if (cfg%Llidar_sim) then
i = Npoints
j = Ncolumns
k = Nlevels
l = Nhydro
m = Nrefl
else
i = 1
j = 1
k = 1
l = 1
m = 1
endif
! Dimensions
x%Npoints = i
x%Ncolumns = j
x%Nlevels = k
x%Nhydro = l
x%Nrefl = m
! --- Allocate arrays ---
allocate(x%srbval(SR_BINS),x%cfad_sr(i,SR_BINS,k), &
x%lidarcld(i,k), x%cldlayer(i,LIDAR_NCAT), x%parasolrefl(i,m))
allocate(x%lidarcldphase(i,k,6),x%lidarcldtmp(i,LIDAR_NTEMP,5),&
x%cldlayerphase(i,LIDAR_NCAT,6))
! --- Initialise to zero ---
x%srbval = 0.0
x%cfad_sr = 0.0
x%lidarcld = 0.0
x%cldlayer = 0.0
x%parasolrefl = 0.0
x%lidarcldphase = 0.0
x%cldlayerphase = 0.0
x%lidarcldtmp = 0.0
END SUBROUTINE CONSTRUCT_COSP_LIDARSTATS
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------------ SUBROUTINE FREE_COSP_LIDARSTATS -------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_LIDARSTATS(x)
type(cosp_lidarstats),intent(inout) :: x
deallocate(x%srbval, x%cfad_sr, x%lidarcld, x%cldlayer, x%parasolrefl)
deallocate(x%cldlayerphase, x%lidarcldtmp, x%lidarcldphase)
END SUBROUTINE FREE_COSP_LIDARSTATS
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_SUBGRID ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_SUBGRID(Npoints,Ncolumns,Nlevels,y)
integer,intent(in) :: Npoints, & ! Number of gridpoints
Ncolumns, & ! Number of columns
Nlevels ! Number of levels
type(cosp_subgrid),intent(out) :: y
! Dimensions
y%Npoints = Npoints
y%Ncolumns = Ncolumns
y%Nlevels = Nlevels
! --- Allocate arrays ---
allocate(y%frac_out(Npoints,Ncolumns,Nlevels))
if (Ncolumns > 1) then
allocate(y%prec_frac(Npoints,Ncolumns,Nlevels))
else ! CRM mode, not needed
allocate(y%prec_frac(1,1,1))
endif
! --- Initialise to zero ---
y%prec_frac = 0.0
y%frac_out = 0.0
! The following line gives a compilation error on the Met Office NEC
! call zero_real(y%mr_hydro)
! f90: error(666): cosp_types.f90, line nnn:
! Actual argument corresponding to dummy
! argument of ELEMENTAL subroutine
! "zero_real" with INTENET(OUT) attribute
! is not array.
END SUBROUTINE CONSTRUCT_COSP_SUBGRID
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_SUBGRID -----------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_SUBGRID(y)
type(cosp_subgrid),intent(inout) :: y
! --- Deallocate arrays ---
deallocate(y%prec_frac, y%frac_out)
END SUBROUTINE FREE_COSP_SUBGRID
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_SGHYDRO -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_SGHYDRO(Npoints,Ncolumns,Nlevels,Nhydro,y)
integer,intent(in) :: Npoints, & ! Number of gridpoints
Ncolumns, & ! Number of columns
Nhydro, & ! Number of hydrometeors
Nlevels ! Number of levels
type(cosp_sghydro),intent(out) :: y
! Dimensions
y%Npoints = Npoints
y%Ncolumns = Ncolumns
y%Nlevels = Nlevels
y%Nhydro = Nhydro
! --- Allocate arrays ---
allocate(y%mr_hydro(Npoints,Ncolumns,Nlevels,Nhydro), &
y%Reff(Npoints,Ncolumns,Nlevels,Nhydro), &
y%Np(Npoints,Ncolumns,Nlevels,Nhydro)) ! added by roj with Quickbeam V3
! --- Initialise to zero ---
y%mr_hydro = 0.0
y%Reff = 0.0
y%Np = 0.0 ! added by roj with Quickbeam V3
END SUBROUTINE CONSTRUCT_COSP_SGHYDRO
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_SGHYDRO -----------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_SGHYDRO(y)
type(cosp_sghydro),intent(inout) :: y
! --- Deallocate arrays ---
deallocate(y%mr_hydro, y%Reff, y%Np) ! added by Roj with Quickbeam V3
END SUBROUTINE FREE_COSP_SGHYDRO
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE CONSTRUCT_COSP_GRIDBOX ------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE CONSTRUCT_COSP_GRIDBOX(time,time_bnds,radar_freq,surface_radar,use_mie_tables,use_gas_abs,do_ray,melt_lay,k2, &
Npoints,Nlevels,Ncolumns,Nhydro,Nprmts_max_hydro,Naero,Nprmts_max_aero,Npoints_it, &
lidar_ice_type,isccp_top_height,isccp_top_height_direction,isccp_overlap,isccp_emsfc_lw, &
use_precipitation_fluxes,use_reff, &
! RTTOV inputs
Plat,Sat,Inst,Nchan,ZenAng,Ichan,SurfEm,co2,ch4,n2o,co,&
y,load_LUT)
double precision,intent(in) :: time ! Time since start of run [days]
double precision,intent(in) :: time_bnds(2) ! Time boundaries
real,intent(in) :: radar_freq, & ! Radar frequency [GHz]
k2 ! |K|^2, -1=use frequency dependent default
integer,intent(in) :: &
surface_radar, & ! surface=1,spaceborne=0
use_mie_tables, & ! use a precomputed lookup table? yes=1,no=0,2=use first column everywhere
use_gas_abs, & ! include gaseous absorption? yes=1,no=0
do_ray, & ! calculate/output Rayleigh refl=1, not=0
melt_lay ! melting layer model off=0, on=1
integer,intent(in) :: Npoints ! Number of gridpoints
integer,intent(in) :: Nlevels ! Number of levels
integer,intent(in) :: Ncolumns ! Number of columns
integer,intent(in) :: Nhydro ! Number of hydrometeors
integer,intent(in) :: Nprmts_max_hydro ! Max number of parameters for hydrometeor size distributions
integer,intent(in) :: Naero ! Number of aerosol species
integer,intent(in) :: Nprmts_max_aero ! Max number of parameters for aerosol size distributions
integer,intent(in) :: Npoints_it ! Number of gridpoints processed in one iteration
integer,intent(in) :: lidar_ice_type ! Ice particle shape in lidar calculations (0=ice-spheres ; 1=ice-non-spherical)
integer,intent(in) :: isccp_top_height
integer,intent(in) :: isccp_top_height_direction
integer,intent(in) :: isccp_overlap
real,intent(in) :: isccp_emsfc_lw
logical,intent(in) :: use_precipitation_fluxes,use_reff
integer,intent(in) :: Plat
integer,intent(in) :: Sat
integer,intent(in) :: Inst
integer,intent(in) :: Nchan
integer,intent(in) :: Ichan(Nchan)
real,intent(in) :: SurfEm(Nchan)
real,intent(in) :: ZenAng
real,intent(in) :: co2,ch4,n2o,co
type(cosp_gridbox),intent(out) :: y
logical,intent(in),optional :: load_LUT
! local variables
character*240 :: LUT_file_name
logical :: local_load_LUT
if (present(load_LUT)) then
local_load_LUT = load_LUT
else
local_load_LUT = RADAR_SIM_LOAD_scale_LUTs_flag
endif
! Dimensions and scalars
y%radar_freq = radar_freq
y%surface_radar = surface_radar
y%use_mie_tables = use_mie_tables
y%use_gas_abs = use_gas_abs
y%do_ray = do_ray
y%melt_lay = melt_lay
y%k2 = k2
y%Npoints = Npoints
y%Nlevels = Nlevels
y%Ncolumns = Ncolumns
y%Nhydro = Nhydro
y%Nprmts_max_hydro = Nprmts_max_hydro
y%Naero = Naero
y%Nprmts_max_aero = Nprmts_max_aero
y%Npoints_it = Npoints_it
y%lidar_ice_type = lidar_ice_type
y%isccp_top_height = isccp_top_height
y%isccp_top_height_direction = isccp_top_height_direction
y%isccp_overlap = isccp_overlap
y%isccp_emsfc_lw = isccp_emsfc_lw
y%use_precipitation_fluxes = use_precipitation_fluxes
y%use_reff = use_reff
y%time = time
y%time_bnds = time_bnds
! RTTOV parameters
y%Plat = Plat
y%Sat = Sat
y%Inst = Inst
y%Nchan = Nchan
y%ZenAng = ZenAng
y%co2 = co2
y%ch4 = ch4
y%n2o = n2o
y%co = co
! --- Allocate arrays ---
! Gridbox information (Npoints,Nlevels)
allocate(y%zlev(Npoints,Nlevels), y%zlev_half(Npoints,Nlevels), y%dlev(Npoints,Nlevels), &
y%p(Npoints,Nlevels), y%ph(Npoints,Nlevels), y%T(Npoints,Nlevels), &
y%q(Npoints,Nlevels), y%sh(Npoints,Nlevels), &
y%dtau_s(Npoints,Nlevels), y%dtau_c(Npoints,Nlevels), &
y%dem_s(Npoints,Nlevels), y%dem_c(Npoints,Nlevels), &
y%tca(Npoints,Nlevels), y%cca(Npoints,Nlevels), &
y%rain_ls(Npoints,Nlevels), y%rain_cv(Npoints,Nlevels), y%grpl_ls(Npoints,Nlevels), &
y%snow_ls(Npoints,Nlevels), y%snow_cv(Npoints,Nlevels),y%mr_ozone(Npoints,Nlevels))
! Surface information and geolocation (Npoints)
allocate(y%toffset(Npoints), y%longitude(Npoints),y%latitude(Npoints),y%psfc(Npoints), y%land(Npoints), &
y%sunlit(Npoints),y%skt(Npoints),y%u_wind(Npoints),y%v_wind(Npoints))
! Hydrometeors concentration and distribution parameters
allocate(y%mr_hydro(Npoints,Nlevels,Nhydro), &
y%dist_prmts_hydro(Nprmts_max_hydro,Nhydro), &
y%Reff(Npoints,Nlevels,Nhydro), &
y%Np(Npoints,Nlevels,Nhydro)) ! added by Roj with Quickbeam V3
! Aerosols concentration and distribution parameters
allocate(y%conc_aero(Npoints,Nlevels,Naero), y%dist_type_aero(Naero), &
y%dist_prmts_aero(Npoints,Nlevels,Nprmts_max_aero,Naero))
! RTTOV channels and sfc. emissivity
allocate(y%ichan(Nchan),y%surfem(Nchan))
! RTTOV parameters
y%ichan = ichan
y%surfem = surfem
! --- Initialise to zero ---
y%zlev = 0.0
y%zlev_half = 0.0
y%dlev = 0.0
y%p = 0.0
y%ph = 0.0
y%T = 0.0
y%q = 0.0
y%sh = 0.0
y%dtau_s = 0.0
y%dtau_c = 0.0
y%dem_s = 0.0
y%dem_c = 0.0
y%tca = 0.0
y%cca = 0.0
y%rain_ls = 0.0
y%rain_cv = 0.0
y%grpl_ls = 0.0
y%snow_ls = 0.0
y%snow_cv = 0.0
y%Reff = 0.0
y%Np = 0.0 ! added by Roj with Quickbeam V3
y%mr_ozone = 0.0
y%u_wind = 0.0
y%v_wind = 0.0
! (Npoints)
y%toffset = 0.0
y%longitude = 0.0
y%latitude = 0.0
y%psfc = 0.0
y%land = 0.0
y%sunlit = 0.0
y%skt = 0.0
! (Npoints,Nlevels,Nhydro)
! y%fr_hydro = 0.0
y%mr_hydro = 0.0
! Others
y%dist_prmts_hydro = 0.0 ! (Nprmts_max_hydro,Nhydro)
y%conc_aero = 0.0 ! (Npoints,Nlevels,Naero)
y%dist_type_aero = 0 ! (Naero)
y%dist_prmts_aero = 0.0 ! (Npoints,Nlevels,Nprmts_max_aero,Naero)
! NOTE: This location use to contain initialization of some radar simulator variables
! this initialization (including use of the variable "dist_prmts_hydro" - now obselete)
! has been unified in the quickbeam v3 subroutine "radar_simulator_init". Roj, June 2010
! --- Initialize the distributional parameters for hydrometeors in radar simulator
write(*,*) 'RADAR_SIM microphysics scheme is set to: ', &
trim(RADAR_SIM_MICROPHYSICS_SCHEME_NAME)
if(y%Nhydro.ne.N_HYDRO) then
write(*,*) 'Number of hydrometeor input to subroutine', &
' CONSTRUCT_COSP_GRIDBOX does not match value', &
' specified in cosp_constants.f90!'
write(*,*)
endif
! NOTE: SAVE_scale_LUTs_flag is hard codded as .false. here
! so that radar simulator will NOT update LUT each time it
! is called, but rather will update when "Free_COSP_GRIDBOX" is called!
! Roj, June 2010
LUT_file_name = trim(RADAR_SIM_LUT_DIRECTORY) // &
trim(RADAR_SIM_MICROPHYSICS_SCHEME_NAME)
call radar_simulator_init(radar_freq,k2, &
use_gas_abs,do_ray,R_UNDEF, &
y%Nhydro, &
HCLASS_TYPE,HCLASS_PHASE, &
HCLASS_DMIN,HCLASS_DMAX, &
HCLASS_APM,HCLASS_BPM,HCLASS_RHO, &
HCLASS_P1,HCLASS_P2,HCLASS_P3, &
local_load_LUT, &
.false., &
LUT_file_name, &
y%hp)
END SUBROUTINE CONSTRUCT_COSP_GRIDBOX
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE FREE_COSP_GRIDBOX -----------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE FREE_COSP_GRIDBOX(y,dglobal,save_LUT)
use scale_LUTs_io
type(cosp_gridbox),intent(inout) :: y
logical,intent(in),optional :: dglobal
logical,intent(in),optional :: save_LUT
logical :: local_save_LUT
if (present(save_LUT)) then
local_save_LUT = save_LUT
else
local_save_LUT = RADAR_SIM_UPDATE_scale_LUTs_flag
endif
! save any updates to radar simulator LUT
if (local_save_LUT) call save_scale_LUTs(y%hp)
deallocate(y%zlev, y%zlev_half, y%dlev, y%p, y%ph, y%T, y%q, &
y%sh, y%dtau_s, y%dtau_c, y%dem_s, y%dem_c, &
y%toffset, y%longitude,y%latitude,y%psfc, y%land, y%tca, y%cca, &
y%mr_hydro, y%dist_prmts_hydro, &
y%conc_aero, y%dist_type_aero, y%dist_prmts_aero, &
y%rain_ls, y%rain_cv, y%snow_ls, y%snow_cv, y%grpl_ls, &
y%sunlit, y%skt, y%Reff,y%Np, &
y%ichan,y%surfem, &
y%mr_ozone,y%u_wind,y%v_wind)
END SUBROUTINE FREE_COSP_GRIDBOX
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_GRIDBOX_CPHP ----------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_GRIDBOX_CPHP(x,y)
type(cosp_gridbox),intent(in) :: x
type(cosp_gridbox),intent(inout) :: y
integer :: i,j,k,sz(3)
double precision :: tny
tny = tiny(tny)
y%hp%p1 = x%hp%p1
y%hp%p2 = x%hp%p2
y%hp%p3 = x%hp%p3
y%hp%dmin = x%hp%dmin
y%hp%dmax = x%hp%dmax
y%hp%apm = x%hp%apm
y%hp%bpm = x%hp%bpm
y%hp%rho = x%hp%rho
y%hp%dtype = x%hp%dtype
y%hp%col = x%hp%col
y%hp%cp = x%hp%cp
y%hp%phase = x%hp%phase
y%hp%fc = x%hp%fc
y%hp%rho_eff = x%hp%rho_eff
! y%hp%ifc = x%hp%ifc obsolete, Roj, June 2010
! y%hp%idd = x%hp%idd
sz = shape(x%hp%Z_scale_flag)
do k=1,sz(3)
do j=1,sz(2)
do i=1,sz(1)
if (x%hp%N_scale_flag(i,k)) y%hp%N_scale_flag(i,k) = .true.
if (x%hp%Z_scale_flag(i,j,k)) y%hp%Z_scale_flag(i,j,k) = .true.
if (abs(x%hp%Ze_scaled(i,j,k)) > tny) y%hp%Ze_scaled(i,j,k) = x%hp%Ze_scaled(i,j,k)
if (abs(x%hp%Zr_scaled(i,j,k)) > tny) y%hp%Zr_scaled(i,j,k) = x%hp%Zr_scaled(i,j,k)
if (abs(x%hp%kr_scaled(i,j,k)) > tny) y%hp%kr_scaled(i,j,k) = x%hp%kr_scaled(i,j,k)
enddo
enddo
enddo
END SUBROUTINE COSP_GRIDBOX_CPHP
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_GRIDBOX_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_GRIDBOX_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_gridbox),intent(in) :: x
type(cosp_gridbox),intent(inout) :: y
! --- Copy arrays without Npoints as dimension ---
y%dist_prmts_hydro = x%dist_prmts_hydro
y%dist_type_aero = x%dist_type_aero
! call cosp_gridbox_cphp(x,y)
! 1D
y%longitude(iy(1):iy(2)) = x%longitude(ix(1):ix(2))
y%latitude(iy(1):iy(2)) = x%latitude(ix(1):ix(2))
y%psfc(iy(1):iy(2)) = x%psfc(ix(1):ix(2))
y%land(iy(1):iy(2)) = x%land(ix(1):ix(2))
y%sunlit(iy(1):iy(2)) = x%sunlit(ix(1):ix(2))
y%skt(iy(1):iy(2)) = x%skt(ix(1):ix(2))
y%u_wind(iy(1):iy(2)) = x%u_wind(ix(1):ix(2))
y%v_wind(iy(1):iy(2)) = x%v_wind(ix(1):ix(2))
! 2D
y%zlev(iy(1):iy(2),:) = x%zlev(ix(1):ix(2),:)
y%zlev_half(iy(1):iy(2),:) = x%zlev_half(ix(1):ix(2),:)
y%dlev(iy(1):iy(2),:) = x%dlev(ix(1):ix(2),:)
y%p(iy(1):iy(2),:) = x%p(ix(1):ix(2),:)
y%ph(iy(1):iy(2),:) = x%ph(ix(1):ix(2),:)
y%T(iy(1):iy(2),:) = x%T(ix(1):ix(2),:)
y%q(iy(1):iy(2),:) = x%q(ix(1):ix(2),:)
y%sh(iy(1):iy(2),:) = x%sh(ix(1):ix(2),:)
y%dtau_s(iy(1):iy(2),:) = x%dtau_s(ix(1):ix(2),:)
y%dtau_c(iy(1):iy(2),:) = x%dtau_c(ix(1):ix(2),:)
y%dem_s(iy(1):iy(2),:) = x%dem_s(ix(1):ix(2),:)
y%dem_c(iy(1):iy(2),:) = x%dem_c(ix(1):ix(2),:)
y%tca(iy(1):iy(2),:) = x%tca(ix(1):ix(2),:)
y%cca(iy(1):iy(2),:) = x%cca(ix(1):ix(2),:)
y%rain_ls(iy(1):iy(2),:) = x%rain_ls(ix(1):ix(2),:)
y%rain_cv(iy(1):iy(2),:) = x%rain_cv(ix(1):ix(2),:)
y%grpl_ls(iy(1):iy(2),:) = x%grpl_ls(ix(1):ix(2),:)
y%snow_ls(iy(1):iy(2),:) = x%snow_ls(ix(1):ix(2),:)
y%snow_cv(iy(1):iy(2),:) = x%snow_cv(ix(1):ix(2),:)
y%mr_ozone(iy(1):iy(2),:) = x%mr_ozone(ix(1):ix(2),:)
! 3D
y%Reff(iy(1):iy(2),:,:) = x%Reff(ix(1):ix(2),:,:)
y%Np(iy(1):iy(2),:,:) = x%Np(ix(1):ix(2),:,:) ! added by Roj with Quickbeam V3
y%conc_aero(iy(1):iy(2),:,:) = x%conc_aero(ix(1):ix(2),:,:)
y%mr_hydro(iy(1):iy(2),:,:) = x%mr_hydro(ix(1):ix(2),:,:)
! 4D
y%dist_prmts_aero(iy(1):iy(2),:,:,:) = x%dist_prmts_aero(ix(1):ix(2),:,:,:)
END SUBROUTINE COSP_GRIDBOX_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_SUBGRID_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_SUBGRID_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_subgrid),intent(in) :: x
type(cosp_subgrid),intent(inout) :: y
y%prec_frac(iy(1):iy(2),:,:) = x%prec_frac(ix(1):ix(2),:,:)
y%frac_out(iy(1):iy(2),:,:) = x%frac_out(ix(1):ix(2),:,:)
END SUBROUTINE COSP_SUBGRID_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_SGRADAR_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_SGRADAR_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_sgradar),intent(in) :: x
type(cosp_sgradar),intent(inout) :: y
y%att_gas(iy(1):iy(2),:) = x%att_gas(ix(1):ix(2),:)
y%Ze_tot(iy(1):iy(2),:,:) = x%Ze_tot(ix(1):ix(2),:,:)
END SUBROUTINE COSP_SGRADAR_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_SGLIDAR_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_SGLIDAR_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_sglidar),intent(in) :: x
type(cosp_sglidar),intent(inout) :: y
y%temp_tot(iy(1):iy(2),:) = x%temp_tot(ix(1):ix(2),:)
y%betaperp_tot(iy(1):iy(2),:,:) = x%betaperp_tot(ix(1):ix(2),:,:)
y%beta_mol(iy(1):iy(2),:) = x%beta_mol(ix(1):ix(2),:)
y%beta_tot(iy(1):iy(2),:,:) = x%beta_tot(ix(1):ix(2),:,:)
y%tau_tot(iy(1):iy(2),:,:) = x%tau_tot(ix(1):ix(2),:,:)
y%refl(iy(1):iy(2),:,:) = x%refl(ix(1):ix(2),:,:)
END SUBROUTINE COSP_SGLIDAR_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_ISCCP_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_ISCCP_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_isccp),intent(in) :: x
type(cosp_isccp),intent(inout) :: y
y%fq_isccp(iy(1):iy(2),:,:) = x%fq_isccp(ix(1):ix(2),:,:)
y%totalcldarea(iy(1):iy(2)) = x%totalcldarea(ix(1):ix(2))
y%meantb(iy(1):iy(2)) = x%meantb(ix(1):ix(2))
y%meantbclr(iy(1):iy(2)) = x%meantbclr(ix(1):ix(2))
y%meanptop(iy(1):iy(2)) = x%meanptop(ix(1):ix(2))
y%meantaucld(iy(1):iy(2)) = x%meantaucld(ix(1):ix(2))
y%meanalbedocld(iy(1):iy(2)) = x%meanalbedocld(ix(1):ix(2))
y%boxtau(iy(1):iy(2),:) = x%boxtau(ix(1):ix(2),:)
y%boxptop(iy(1):iy(2),:) = x%boxptop(ix(1):ix(2),:)
END SUBROUTINE COSP_ISCCP_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_MISR_CPSECTION -----------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_MISR_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_misr),intent(in) :: x
type(cosp_misr),intent(inout) :: y
y%fq_MISR(iy(1):iy(2),:,:) = x%fq_MISR(ix(1):ix(2),:,:)
y%MISR_meanztop(iy(1):iy(2)) = x%MISR_meanztop(ix(1):ix(2))
y%MISR_cldarea(iy(1):iy(2)) = x%MISR_cldarea(ix(1):ix(2))
y%MISR_dist_model_layertops(iy(1):iy(2),:) = x%MISR_dist_model_layertops(ix(1):ix(2),:)
END SUBROUTINE COSP_MISR_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_RTTOV_CPSECTION -------------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_RTTOV_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_rttov),intent(in) :: x
type(cosp_rttov),intent(inout) :: y
y%tbs(iy(1):iy(2),:) = x%tbs(ix(1):ix(2),:)
END SUBROUTINE COSP_RTTOV_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_RADARSTATS_CPSECTION --------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_RADARSTATS_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_radarstats),intent(in) :: x
type(cosp_radarstats),intent(inout) :: y
y%cfad_ze(iy(1):iy(2),:,:) = x%cfad_ze(ix(1):ix(2),:,:)
y%radar_lidar_tcc(iy(1):iy(2)) = x%radar_lidar_tcc(ix(1):ix(2))
y%lidar_only_freq_cloud(iy(1):iy(2),:) = x%lidar_only_freq_cloud(ix(1):ix(2),:)
END SUBROUTINE COSP_RADARSTATS_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- SUBROUTINE COSP_LIDARSTATS_CPSECTION --------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_LIDARSTATS_CPSECTION(ix,iy,x,y)
integer,intent(in),dimension(2) :: ix,iy
type(cosp_lidarstats),intent(in) :: x
type(cosp_lidarstats),intent(inout) :: y
y%srbval = x%srbval
y%cfad_sr(iy(1):iy(2),:,:) = x%cfad_sr(ix(1):ix(2),:,:)
y%lidarcld(iy(1):iy(2),:) = x%lidarcld(ix(1):ix(2),:)
y%cldlayer(iy(1):iy(2),:) = x%cldlayer(ix(1):ix(2),:)
y%parasolrefl(iy(1):iy(2),:) = x%parasolrefl(ix(1):ix(2),:)
y%lidarcldphase(iy(1):iy(2),:,:) = x%lidarcldphase(ix(1):ix(2),:,:)
y%cldlayerphase(iy(1):iy(2),:,:) = x%cldlayerphase(ix(1):ix(2),:,:)
y%lidarcldtmp(iy(1):iy(2),:,:) = x%lidarcldtmp(ix(1):ix(2),:,:)
END SUBROUTINE COSP_LIDARSTATS_CPSECTION
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!------------- PRINT SUBROUTINES --------------
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
SUBROUTINE COSP_GRIDBOX_PRINT(x)
type(cosp_gridbox),intent(in) :: x
print *, '%%%%----- Information on COSP_GRIDBOX ------'
! Scalars and dimensions
print *, x%Npoints
print *, x%Nlevels
print *, x%Ncolumns
print *, x%Nhydro
print *, x%Nprmts_max_hydro
print *, x%Naero
print *, x%Nprmts_max_aero
print *, x%Npoints_it
! Time [days]
print *, x%time
! Radar ancillary info
print *, x%radar_freq, &
x%k2
print *, x%surface_radar, &
x%use_mie_tables, &
x%use_gas_abs, &
x%do_ray, &
x%melt_lay
! print *, 'shape(x%): ',shape(x%)
! type(class_param) :: hp ! structure used by radar simulator to store Ze and N scaling constants and other information
! type(mie):: mt ! structure used by radar simulator to store mie LUT information
print *, x%nsizes
! Lidar
print *, x%lidar_ice_type
! Radar
print *, x%use_precipitation_fluxes
print *, x%use_reff
! Geolocation (Npoints)
print *, 'shape(x%longitude): ',shape(x%longitude)
print *, 'shape(x%latitude): ',shape(x%latitude)
! Gridbox information (Npoints,Nlevels)
print *, 'shape(x%zlev): ',shape(x%zlev)
print *, 'shape(x%zlev_half): ',shape(x%zlev_half)
print *, 'shape(x%dlev): ',shape(x%dlev)
print *, 'shape(x%p): ',shape(x%p)
print *, 'shape(x%ph): ',shape(x%ph)
print *, 'shape(x%T): ',shape(x%T)
print *, 'shape(x%q): ',shape(x%q)
print *, 'shape(x%sh): ',shape(x%sh)
print *, 'shape(x%dtau_s): ',shape(x%dtau_s)
print *, 'shape(x%dtau_c): ',shape(x%dtau_c)
print *, 'shape(x%dem_s): ',shape(x%dem_s)
print *, 'shape(x%dem_c): ',shape(x%dem_c)
print *, 'shape(x%mr_ozone): ',shape(x%mr_ozone)
! Point information (Npoints)
print *, 'shape(x%land): ',shape(x%land)
print *, 'shape(x%psfc): ',shape(x%psfc)
print *, 'shape(x%sunlit): ',shape(x%sunlit)
print *, 'shape(x%skt): ',shape(x%skt)
print *, 'shape(x%u_wind): ',shape(x%u_wind)
print *, 'shape(x%v_wind): ',shape(x%v_wind)
! TOTAL and CONV cloud fraction for SCOPS
print *, 'shape(x%tca): ',shape(x%tca)
print *, 'shape(x%cca): ',shape(x%cca)
! Precipitation fluxes on model levels
print *, 'shape(x%rain_ls): ',shape(x%rain_ls)
print *, 'shape(x%rain_cv): ',shape(x%rain_cv)
print *, 'shape(x%snow_ls): ',shape(x%snow_ls)
print *, 'shape(x%snow_cv): ',shape(x%snow_cv)
print *, 'shape(x%grpl_ls): ',shape(x%grpl_ls)
! Hydrometeors concentration and distribution parameters
print *, 'shape(x%mr_hydro): ',shape(x%mr_hydro)
print *, 'shape(x%dist_prmts_hydro): ',shape(x%dist_prmts_hydro)
! Effective radius [m]. (Npoints,Nlevels,Nhydro)
print *, 'shape(x%Reff): ',shape(x%Reff)
print *, 'shape(x%Np): ',shape(x%Np) ! added by roj with Quickbeam V3
! Aerosols concentration and distribution parameters
print *, 'shape(x%conc_aero): ',shape(x%conc_aero)
print *, 'shape(x%dist_type_aero): ',shape(x%dist_type_aero)
print *, 'shape(x%dist_prmts_aero): ',shape(x%dist_prmts_aero)
! ISCCP simulator inputs
print *, x%isccp_top_height
print *, x%isccp_top_height_direction
print *, x%isccp_overlap
print *, x%isccp_emsfc_lw
! RTTOV inputs/options
print *, x%plat
print *, x%sat
print *, x%inst
print *, x%Nchan
print *, 'shape(x%Ichan): ',x%Ichan
print *, 'shape(x%Surfem): ',x%Surfem
print *, x%ZenAng
print *, x%co2,x%ch4,x%n2o,x%co
END SUBROUTINE COSP_GRIDBOX_PRINT
SUBROUTINE COSP_MISR_PRINT(x)
type(cosp_misr),intent(in) :: x
print *, '%%%%----- Information on COSP_MISR ------'
! Dimensions
print *, x%Npoints
print *, x%Ntau
print *, x%Nlevels
! --- (npoints,ntau,nlevels)
! the fraction of the model grid box covered by each of the MISR cloud types
print *, 'shape(x%fq_MISR): ',shape(x%fq_MISR)
! --- (npoints)
print *, 'shape(x%MISR_meanztop): ',shape(x%MISR_meanztop)
print *, 'shape(x%MISR_cldarea): ',shape(x%MISR_cldarea)
! --- (npoints,nlevels)
print *, 'shape(x%MISR_dist_model_layertops): ',shape(x%MISR_dist_model_layertops)
END SUBROUTINE COSP_MISR_PRINT
SUBROUTINE COSP_ISCCP_PRINT(x)
type(cosp_isccp),intent(in) :: x
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, '%%%%----- Information on COSP_ISCCP ------'
print *, 'shape(x%fq_isccp): ',shape(x%fq_isccp)
print *, 'shape(x%totalcldarea): ',shape(x%totalcldarea)
print *, 'shape(x%meantb): ',shape(x%meantb)
print *, 'shape(x%meantbclr): ',shape(x%meantbclr)
print *, 'shape(x%meanptop): ',shape(x%meanptop)
print *, 'shape(x%meantaucld): ',shape(x%meantaucld)
print *, 'shape(x%meanalbedocld): ',shape(x%meanalbedocld)
print *, 'shape(x%boxtau): ',shape(x%boxtau)
print *, 'shape(x%boxptop): ',shape(x%boxptop)
END SUBROUTINE COSP_ISCCP_PRINT
SUBROUTINE COSP_VGRID_PRINT(x)
type(cosp_vgrid),intent(in) :: x
print *, '%%%%----- Information on COSP_VGRID ------'
print *, x%use_vgrid
print *, x%csat_vgrid
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nlvgrid
! Array with dimensions (Nlvgrid)
print *, 'shape(x%z): ',shape(x%z)
print *, 'shape(x%zl): ',shape(x%zl)
print *, 'shape(x%zu): ',shape(x%zu)
! Array with dimensions (Nlevels)
print *, 'shape(x%mz): ',shape(x%mz)
print *, 'shape(x%mzl): ',shape(x%mzl)
print *, 'shape(x%mzu): ',shape(x%mzu)
END SUBROUTINE COSP_VGRID_PRINT
SUBROUTINE COSP_SGLIDAR_PRINT(x)
type(cosp_sglidar),intent(in) :: x
print *, '%%%%----- Information on COSP_SGLIDAR ------'
! Dimensions
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
print *, x%Nrefl
! Arrays with dimensions (Npoints,Nlevels)
print *, 'shape(x%beta_mol): ',shape(x%beta_mol)
! Arrays with dimensions (Npoints,Ncolumns,Nlevels)
print *, 'shape(x%beta_tot): ',shape(x%beta_tot)
print *, 'shape(x%tau_tot): ',shape(x%tau_tot)
! Arrays with dimensions (Npoints,Ncolumns,Nrefl)
print *, 'shape(x%refl): ',shape(x%refl)
END SUBROUTINE COSP_SGLIDAR_PRINT
SUBROUTINE COSP_SGRADAR_PRINT(x)
type(cosp_sgradar),intent(in) :: x
print *, '%%%%----- Information on COSP_SGRADAR ------'
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
! output vertical levels: spaceborne radar -> from TOA to SURFACE
! Arrays with dimensions (Npoints,Nlevels)
print *, 'shape(x%att_gas): ', shape(x%att_gas)
! Arrays with dimensions (Npoints,Ncolumns,Nlevels)
print *, 'shape(x%Ze_tot): ', shape(x%Ze_tot)
END SUBROUTINE COSP_SGRADAR_PRINT
SUBROUTINE COSP_RADARSTATS_PRINT(x)
type(cosp_radarstats),intent(in) :: x
print *, '%%%%----- Information on COSP_SGRADAR ------'
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
print *, 'shape(x%cfad_ze): ',shape(x%cfad_ze)
print *, 'shape(x%radar_lidar_tcc): ',shape(x%radar_lidar_tcc)
print *, 'shape(x%lidar_only_freq_cloud): ',shape(x%lidar_only_freq_cloud)
END SUBROUTINE COSP_RADARSTATS_PRINT
SUBROUTINE COSP_LIDARSTATS_PRINT(x)
type(cosp_lidarstats),intent(in) :: x
print *, '%%%%----- Information on COSP_SGLIDAR ------'
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
print *, x%Nrefl
! Arrays with dimensions (SR_BINS)
print *, 'shape(x%srbval): ',shape(x%srbval)
! Arrays with dimensions (Npoints,SR_BINS,Nlevels)
print *, 'shape(x%cfad_sr): ',shape(x%cfad_sr)
! Arrays with dimensions (Npoints,Nlevels)
print *, 'shape(x%lidarcld): ',shape(x%lidarcld)
! Arrays with dimensions (Npoints,LIDAR_NCAT)
print *, 'shape(x%cldlayer): ',shape(x%cldlayer)
! Arrays with dimensions (Npoints,PARASOL_NREFL)
print *, 'shape(x%parasolrefl): ',shape(x%parasolrefl)
! Arrays with dimensions (Npoints,Nlevels,Nphase)
print *, 'shape(x%lidarcldphase): ',shape(x%lidarcldphase)
! Arrays with dimensions (Npoints,LIDAR_NCAT,Nphase)
print *, 'shape(x%cldlayerphase): ',shape(x%cldlayerphase)
! Arrays with dimensions (Npoints,Ntemps,Nphase)
print *, 'shape(x%lidarcldphase): ',shape(x%lidarcldtmp)
END SUBROUTINE COSP_LIDARSTATS_PRINT
SUBROUTINE COSP_SUBGRID_PRINT(x)
type(cosp_subgrid),intent(in) :: x
print *, '%%%%----- Information on COSP_SUBGRID ------'
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
print *, 'shape(x%prec_frac): ',shape(x%prec_frac)
print *, 'shape(x%frac_out): ',shape(x%frac_out)
END SUBROUTINE COSP_SUBGRID_PRINT
SUBROUTINE COSP_SGHYDRO_PRINT(x)
type(cosp_sghydro),intent(in) :: x
print *, '%%%%----- Information on COSP_SGHYDRO ------'
print *, x%Npoints
print *, x%Ncolumns
print *, x%Nlevels
print *, x%Nhydro
print *, 'shape(x%mr_hydro): ',shape(x%mr_hydro)
print *, 'shape(x%Reff): ',shape(x%Reff)
print *, 'shape(x%Np): ',shape(x%Np) ! added by roj with Quickbeam V3
END SUBROUTINE COSP_SGHYDRO_PRINT
END MODULE MOD_COSP_TYPES
