# Copyright:	Public domain.
# Filename:	KALCMANU_STEERING.agc
# Purpose:	Part of the source code for Comanche, build 055.
#		It is part of the source code for the Command Module's (CM)
#		Apollo Guidance Computer (AGC), Apollo 11.
# Assembler:	yaYUL
# Reference:	pp. 414-419
# Contact:	Onno Hommes <ohommes@cmu.edu>.
# Website:	www.ibiblio.org/apollo.
# Mod history:	05/07/09 OH	Transcription Batch 1 Assignment
#
# The contents of the "Comanche055" files, in general, are transcribed
# from scanned documents.
#
#	Assemble revision 055 of AGC program Comanche by NASA
#	2021113-051.  April 1, 1969.
#
#	This AGC program shall also be referred to as Colossus 2A
#
#	Prepared by
#			Massachusetts Institute of Technology
#			75 Cambridge Parkway
#			Cambridge, Massachusetts
#
#	under NASA contract NAS 9-4065.
#
# Refer directly to the online document mentioned above for further information.
# Please report any errors to info@sandroid.org.

# Page 414
# GENERATION OF STEERING COMMANDS FOR DIGITAL AUTOPILOT FREE FALL MANEUVERS
#
# NEW COMMANDS WILL BE GENERATED EVERY ONE SECOND DURING THE MANEUVER

		BANK	15

		SETLOC	KALCMON1
		BANK

		EBANK=	BCDU

		COUNT	22/KALC

NEWDELHI	CS	HOLDFLAG	# SEE IF MANEUVER HAS BEEN INTERRUPTED
		EXTEND			# BY ASTRONAUT
		BZMF	NOGO	-2	# IF SO, TERMINATE KALCMANU
NEWANGL		TC	INTPRET
		AXC,1	AXC,2
			MIS		# COMPUTE THE NEW MATRIX FROM S/C TO
			DEL		# STABLE MEMBER AXES
		CALL
			MXM3
		VLOAD	STADR
		STOVL	MIS +12D	# CALCULATE NEW DESIRED CDU ANGLES
		STADR
		STOVL	MIS +6D
		STADR
		STORE	MIS
		AXC,1	CALL
			MIS
			DCMTOCDU	# PICK UP THE NEW CDU ANGLES FROM MATRIX
		RTB
			V1STO2S
		STORE	NCDU		# NEW CDU ANGLES
		BONCLR	EXIT
			CALCMAN2
			MANUSTAT	# TO START MANEUVER
		CAF	TWO		# 	   +0 OTHERWISE
INCRDCDU	TS	KSPNDX
		DOUBLE
		TS	KDPNDX
		INDEX	KSPNDX
		CA	NCDU		# NEW DESIRED CDU ANGLES
		EXTEND
		INDEX	KSPNDX
		MSU	BCDU		# INITIAL S/C ANGLE OR PREVIOUS DESIRED
		EXTEND			# CDU ANGLES
		MP	QUADROT
		INDEX	KDPNDX
		DXCH	DELCDUX		# ANGEL INCREMENTS TO BE ADDED TO
# Page 415
		INDEX	KSPNDX		# DCDU EVERY TENTH SEC
		CA	NCDU		# BY LEM DAP
		INDEX	KSPNDX
		XCH	BCDU
		INDEX	KDPNDX
		TS	CDUXD
		CCS	KSPNDX
		TCF	INCRDCDU	# LOOP FOR THREE AXES

		RELINT
# COMPARE PRESENT TIME WITH TIME TO TERMINATE MANEUVER

TMANUCHK	TC	TIMECHK
		TC	POSTJUMP
		CADR	CONTMANU

		CAF	ONE
MANUSTAL	TC	WAITLIST
		EBANK=	BCDU
		2CADR	MANUSTOP

		RELINT
		TCF	ENDOFJOB


TIMECHK		EXTEND
		DCS	TIME2
		DXCH	TTEMP
		EXTEND
		DCA	TM
		DAS	TTEMP
		CCS	TTEMP
		TC	Q
		TCF	+2
		TCF	2NDRETRN
		CCS	TTEMP +1
		TC	Q
		TCF	MANUOFF
		COM
MANUOFF		AD	1SEC
		EXTEND
		BZMF	2NDRETRN
		INCR	Q
2NDRETRN	INCR	Q
		INCR	Q
		TC	Q

		SETLOC	MANUSTUF
		BANK
# Page 416
MANUSTAT	EXIT			# INITIALIZATION ROUTINE
		EXTEND			# FOR AUTOMATIC MANEUVERS
		DCA	TIME2
		DAS	TM		# TM+T0    MANEUVER COMPLETION TIME
		CS	1SEC
		TS	L
		CS	ZERO
		DAS	TM		# (TM+T0)-1
		INHINT
		CS	ONE		# ENABLE AUTOPILOT TO PERFORM
		TS	HOLDFLAG	# AUTOMATIC MANEUVERS
		CS	RATEINDX	# SEE IF MANEUVERING AT HIGH RATE
		AD	SIX
		EXTEND
		BZMF	HIGHGAIN
		TCF	+4
HIGHGAIN	CS	RCSFLAGS	# IF SO, SET HIGH RATE FLAG (BIT 15 OF
		MASK	BIT15		# RCSFLAGS)
		ADS	RCSFLAGS
		DXCH	BRATE		# X-AXIS MANEUVER RATE
		DXCH	WBODY
		DXCH	BRATE +2	# Y-AXIS MANEUVER RATE
		DXCH	WBODY1
		DXCH	BRATE +4	# Z-AXIS MANEUVER RATE
		DXCH	WBODY2
		CA	BIASTEMP +1	# INSERT ATTITUDE ERROR BIASES
		TS	BIAS		# INTO AUTOPILOT
		CA	BIASTEMP +3
		TS	BIAS1
		CA	BIASTEMP +5
		TS	BIAS2
		CA	TIME1
		AD	1SEC
		XCH	NEXTIME
		TC	POSTJUMP
		CADR	INCRDCDU -1

CONTMANU	INHINT			# CONTINUE WITH UPDATE PROCESS
		CS	TIME1
		AD	NEXTIME
		CCS	A
		AD	ONE
		TCF	MANUCALL
		AD	NEGMAX
		COM
MANUCALL	TC	WAITLIST
		EBANK=	BCDU
		2CADR	UPDTCALL

		RELINT
# Page 417
		CAF	1SEC		# INCREMENT TIME FOR NEXT UPDATE
		ADS	NEXTIME
		TCF	ENDOFJOB


UPDTCALL	CAF	PRIO26		# CALL FOR UPDATE
		TC	FINDVAC		# OF STEERING COMMANDS
		EBANK=	BCDU
		2CADR	NEWDELHI

		TC	TASKOVER

# Page 418
# ROUTINE FOR TERMINATING AUTOMATIC MANEUVERS

		SETLOC	KALCMON3
		BANK

MANUSTOP	TC	STOPYZ
		TC	IBNKCALL
		CADR	LOADYZ

ENDROLL		CA	CPHI
		TS	CDUXD		# SET CDUXD TO THE COMMANDED OUTER GIMBAL
		TC	STOPRATE
ENDMANU		CA	ATTPRIO		# RESTORE USERS PRIORITY
		TS	NEWPRIO

		CA	ZERO		# ZERO ATTCADR
		DXCH	ATTCADR

		TC	SPVAC		# RETURN TO USER OF GOMANUR

		TC	TASKOVER

		SETLOC	STOPRAT
		BANK
STOPRATE	CAF	ZERO
		TS	DELCDUX
		TS	DELCDUX	+1	# ZERO ROLL INCREMENTAL ANGLES
		TS	WBODY		# RATE
		TS	WBODY +1
		TS	BIAS		# BIAS

		CS	BIT15		# MAKE SURE HIGH RATE FLAG (BIT 15 OF
		MASK	RCSFLAGS	# RCSFLAGS) IS RESET.
		TS	RCSFLAGS

STOPYZ		CAF	ZERO
		TS	DELCDUY		# ZERO PITCH, YAW
		TS	DELCDUY	+1	# INCREMENTAL ANGLES
		TS	DELCDUZ
		TS	DELCDUZ	+1
		TS	WBODY1		# RATES
		TS	WBODY1 +1
		TS	WBODY2
		TS	WBODY2 +1
		TS	BIAS1		# BIASES
		TS	BIAS2
		TC	Q

		SETLOC MANUSTUF
		BANK

# Page 419
ZEROERROR	CA	CDUX		# PICK UP CDU ANGLES AND STORE IN
		TS	CDUXD		# CDU DESIRED
		CA	CDUY
		TS	CDUYD
		CA	CDUZ
		TS	CDUZD
		TC	Q

		SETLOC	KALCMON1
		BANK

LOADCDUD	CA	CPHI		# STORE TERMINAL ANGLES INTO
		TS	CDUXD		# COMMAND ANGLES
LOADYZ		CA	CTHETA
		TS	CDUYD
		CA	CPSI
		TS	CDUZD
		TC	Q