https://github.com/Kitware/CMake
Tip revision: 63d21c1f8efeb2f2337221119c479d75bbb0b7c0 authored by David Cole on 03 November 2010, 17:38:38 UTC
CMake 2.8.3
CMake 2.8.3
Tip revision: 63d21c1
FindQt4.cmake
# - Find QT 4
# This module can be used to find Qt4.
# The most important issue is that the Qt4 qmake is available via the system path.
# This qmake is then used to detect basically everything else.
# This module defines a number of key variables and macros.
# The variable QT_USE_FILE is set which is the path to a CMake file that can be included
# to compile Qt 4 applications and libraries. It sets up the compilation
# environment for include directories, preprocessor defines and populates a
# QT_LIBRARIES variable.
#
# Typical usage could be something like:
# find_package(Qt4 4.4.3 COMPONENTS QtCore QtGui QtXml REQUIRED )
# include(${QT_USE_FILE})
# add_executable(myexe main.cpp)
# target_link_libraries(myexe ${QT_LIBRARIES})
#
# The minimum required version can be specified using the standard find_package()-syntax
# (see example above).
# For compatibility with older versions of FindQt4.cmake it is also possible to
# set the variable QT_MIN_VERSION to the minimum required version of Qt4 before the
# find_package(Qt4) command.
# If both are used, the version used in the find_package() command overrides the
# one from QT_MIN_VERSION.
#
# When using the components argument, QT_USE_QT* variables are automatically set
# for the QT_USE_FILE to pick up. If one wishes to manually set them, the
# available ones to set include:
# QT_DONT_USE_QTCORE
# QT_DONT_USE_QTGUI
# QT_USE_QT3SUPPORT
# QT_USE_QTASSISTANT
# QT_USE_QAXCONTAINER
# QT_USE_QAXSERVER
# QT_USE_QTDESIGNER
# QT_USE_QTMOTIF
# QT_USE_QTMAIN
# QT_USE_QTMULTIMEDIA
# QT_USE_QTNETWORK
# QT_USE_QTNSPLUGIN
# QT_USE_QTOPENGL
# QT_USE_QTSQL
# QT_USE_QTXML
# QT_USE_QTSVG
# QT_USE_QTTEST
# QT_USE_QTUITOOLS
# QT_USE_QTDBUS
# QT_USE_QTSCRIPT
# QT_USE_QTASSISTANTCLIENT
# QT_USE_QTHELP
# QT_USE_QTWEBKIT
# QT_USE_QTXMLPATTERNS
# QT_USE_PHONON
# QT_USE_QTSCRIPTTOOLS
# QT_USE_QTDECLARATIVE
#
# QT_USE_IMPORTED_TARGETS
# If this variable is set to TRUE, FindQt4.cmake will create imported
# library targets for the various Qt libraries and set the
# library variables like QT_QTCORE_LIBRARY to point at these imported
# targets instead of the library file on disk. This provides much better
# handling of the release and debug versions of the Qt libraries and is
# also always backwards compatible, except for the case that dependencies
# of libraries are exported, these will then also list the names of the
# imported targets as dependency and not the file location on disk. This
# is much more flexible, but requires that FindQt4.cmake is executed before
# such an exported dependency file is processed.
#
# There are also some files that need processing by some Qt tools such as moc
# and uic. Listed below are macros that may be used to process those files.
#
# macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...)
# create moc code from a list of files containing Qt class with
# the Q_OBJECT declaration. Per-direcotry preprocessor definitions
# are also added. Options may be given to moc, such as those found
# when executing "moc -help".
#
# macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
# create code from a list of Qt designer ui files.
# Options may be given to uic, such as those found
# when executing "uic -help"
#
# macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
# create code from a list of Qt resource files.
# Options may be given to rcc, such as those found
# when executing "rcc -help"
#
# macro QT4_GENERATE_MOC(inputfile outputfile )
# creates a rule to run moc on infile and create outfile.
# Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
# because you need a custom filename for the moc file or something similar.
#
# macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... )
# This macro is still experimental.
# It can be used to have moc automatically handled.
# So if you have the files foo.h and foo.cpp, and in foo.h a
# a class uses the Q_OBJECT macro, moc has to run on it. If you don't
# want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
# #include "foo.moc"
# in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will the
# scan all listed files at cmake-time for such included moc files and if it finds
# them cause a rule to be generated to run moc at build time on the
# accompanying header file foo.h.
# If a source file has the SKIP_AUTOMOC property set it will be ignored by this macro.
#
# macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
# create a the interface header and implementation files with the
# given basename from the given interface xml file and add it to
# the list of sources
#
# macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
# create the interface header and implementation files
# for all listed interface xml files
# the name will be automatically determined from the name of the xml file
#
# macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname [basename] [classname])
# create a dbus adaptor (header and implementation file) from the xml file
# describing the interface, and add it to the list of sources. The adaptor
# forwards the calls to a parent class, defined in parentheader and named
# parentclassname. The name of the generated files will be
# <basename>adaptor.{cpp,h} where basename defaults to the basename of the xml file.
# If <classname> is provided, then it will be used as the classname of the
# adaptor itself.
#
# macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
# generate the xml interface file from the given header.
# If the optional argument interfacename is omitted, the name of the
# interface file is constructed from the basename of the header with
# the suffix .xml appended.
# Options may be given to qdbuscpp2xml, such as those found when executing "qdbuscpp2xml --help"
#
# macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ...
# ts_files ... OPTIONS ...)
# out: qm_files
# in: directories sources ts_files
# options: flags to pass to lupdate, such as -extensions to specify
# extensions for a directory scan.
# generates commands to create .ts (vie lupdate) and .qm
# (via lrelease) - files from directories and/or sources. The ts files are
# created and/or updated in the source tree (unless given with full paths).
# The qm files are generated in the build tree.
# Updating the translations can be done by adding the qm_files
# to the source list of your library/executable, so they are
# always updated, or by adding a custom target to control when
# they get updated/generated.
#
# macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
# out: qm_files
# in: ts_files
# generates commands to create .qm from .ts - files. The generated
# filenames can be found in qm_files. The ts_files
# must exists and are not updated in any way.
#
#
# Below is a detailed list of variables that FindQt4.cmake sets.
# QT_FOUND If false, don't try to use Qt.
# QT4_FOUND If false, don't try to use Qt 4.
#
# QT_VERSION_MAJOR The major version of Qt found.
# QT_VERSION_MINOR The minor version of Qt found.
# QT_VERSION_PATCH The patch version of Qt found.
#
# QT_EDITION Set to the edition of Qt (i.e. DesktopLight)
# QT_EDITION_DESKTOPLIGHT True if QT_EDITION == DesktopLight
# QT_QTCORE_FOUND True if QtCore was found.
# QT_QTGUI_FOUND True if QtGui was found.
# QT_QT3SUPPORT_FOUND True if Qt3Support was found.
# QT_QTASSISTANT_FOUND True if QtAssistant was found.
# QT_QTASSISTANTCLIENT_FOUND True if QtAssistantClient was found.
# QT_QAXCONTAINER_FOUND True if QAxContainer was found (Windows only).
# QT_QAXSERVER_FOUND True if QAxServer was found (Windows only).
# QT_QTDBUS_FOUND True if QtDBus was found.
# QT_QTDESIGNER_FOUND True if QtDesigner was found.
# QT_QTDESIGNERCOMPONENTS True if QtDesignerComponents was found.
# QT_QTHELP_FOUND True if QtHelp was found.
# QT_QTMOTIF_FOUND True if QtMotif was found.
# QT_QTMULTIMEDIA_FOUND True if QtMultimedia was found (since Qt 4.6.0).
# QT_QTNETWORK_FOUND True if QtNetwork was found.
# QT_QTNSPLUGIN_FOUND True if QtNsPlugin was found.
# QT_QTOPENGL_FOUND True if QtOpenGL was found.
# QT_QTSQL_FOUND True if QtSql was found.
# QT_QTSVG_FOUND True if QtSvg was found.
# QT_QTSCRIPT_FOUND True if QtScript was found.
# QT_QTSCRIPTTOOLS_FOUND True if QtScriptTools was found.
# QT_QTTEST_FOUND True if QtTest was found.
# QT_QTUITOOLS_FOUND True if QtUiTools was found.
# QT_QTWEBKIT_FOUND True if QtWebKit was found.
# QT_QTXML_FOUND True if QtXml was found.
# QT_QTXMLPATTERNS_FOUND True if QtXmlPatterns was found.
# QT_PHONON_FOUND True if phonon was found.
# QT_QTDECLARATIVE_FOUND True if QtDeclarative was found.
#
# QT_MAC_USE_COCOA For Mac OS X, its whether Cocoa or Carbon is used.
# In general, this should not be used, but its useful
# when having platform specific code.
#
# QT_DEFINITIONS Definitions to use when compiling code that uses Qt.
# You do not need to use this if you include QT_USE_FILE.
# The QT_USE_FILE will also define QT_DEBUG and QT_NO_DEBUG
# to fit your current build type. Those are not contained
# in QT_DEFINITIONS.
#
# QT_INCLUDES List of paths to all include directories of
# Qt4 QT_INCLUDE_DIR and QT_QTCORE_INCLUDE_DIR are
# always in this variable even if NOTFOUND,
# all other INCLUDE_DIRS are
# only added if they are found.
# You do not need to use this if you include QT_USE_FILE.
#
#
# Include directories for the Qt modules are listed here.
# You do not need to use these variables if you include QT_USE_FILE.
#
# QT_INCLUDE_DIR Path to "include" of Qt4
# QT_QT3SUPPORT_INCLUDE_DIR Path to "include/Qt3Support"
# QT_QTASSISTANT_INCLUDE_DIR Path to "include/QtAssistant"
# QT_QTASSISTANTCLIENT_INCLUDE_DIR Path to "include/QtAssistant"
# QT_QAXCONTAINER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only)
# QT_QAXSERVER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only)
# QT_QTCORE_INCLUDE_DIR Path to "include/QtCore"
# QT_QTDBUS_INCLUDE_DIR Path to "include/QtDBus"
# QT_QTDESIGNER_INCLUDE_DIR Path to "include/QtDesigner"
# QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR Path to "include/QtDesigner"
# QT_QTGUI_INCLUDE_DIR Path to "include/QtGui"
# QT_QTHELP_INCLUDE_DIR Path to "include/QtHelp"
# QT_QTMOTIF_INCLUDE_DIR Path to "include/QtMotif"
# QT_QTMULTIMEDIA_INCLUDE_DIR Path to "include/QtMultimedia"
# QT_QTNETWORK_INCLUDE_DIR Path to "include/QtNetwork"
# QT_QTNSPLUGIN_INCLUDE_DIR Path to "include/QtNsPlugin"
# QT_QTOPENGL_INCLUDE_DIR Path to "include/QtOpenGL"
# QT_QTSCRIPT_INCLUDE_DIR Path to "include/QtScript"
# QT_QTSQL_INCLUDE_DIR Path to "include/QtSql"
# QT_QTSVG_INCLUDE_DIR Path to "include/QtSvg"
# QT_QTTEST_INCLUDE_DIR Path to "include/QtTest"
# QT_QTWEBKIT_INCLUDE_DIR Path to "include/QtWebKit"
# QT_QTXML_INCLUDE_DIR Path to "include/QtXml"
# QT_QTXMLPATTERNS_INCLUDE_DIR Path to "include/QtXmlPatterns"
# QT_PHONON_INCLUDE_DIR Path to "include/phonon"
# QT_QTSCRIPTTOOLS_INCLUDE_DIR Path to "include/QtScriptTools"
# QT_QTDECLARATIVE_INCLUDE_DIR Path to "include/QtDeclarative"
#
# QT_BINARY_DIR Path to "bin" of Qt4
# QT_LIBRARY_DIR Path to "lib" of Qt4
# QT_PLUGINS_DIR Path to "plugins" for Qt4
# QT_TRANSLATIONS_DIR Path to "translations" of Qt4
# QT_IMPORTS_DIR Path to "imports" of Qt4
# QT_DOC_DIR Path to "doc" of Qt4
# QT_MKSPECS_DIR Path to "mkspecs" of Qt4
#
#
# The Qt toolkit may contain both debug and release libraries.
# In that case, the following library variables will contain both.
# You do not need to use these variables if you include QT_USE_FILE,
# and use QT_LIBRARIES.
#
# QT_QT3SUPPORT_LIBRARY The Qt3Support library
# QT_QTASSISTANT_LIBRARY The QtAssistant library
# QT_QTASSISTANTCLIENT_LIBRARY The QtAssistantClient library
# QT_QAXCONTAINER_LIBRARY The QAxContainer library (Windows only)
# QT_QAXSERVER_LIBRARY The QAxServer library (Windows only)
# QT_QTCORE_LIBRARY The QtCore library
# QT_QTDBUS_LIBRARY The QtDBus library
# QT_QTDESIGNER_LIBRARY The QtDesigner library
# QT_QTDESIGNERCOMPONENTS_LIBRARY The QtDesignerComponents library
# QT_QTGUI_LIBRARY The QtGui library
# QT_QTHELP_LIBRARY The QtHelp library
# QT_QTMOTIF_LIBRARY The QtMotif library
# QT_QTMULTIMEDIA_LIBRARY The QtMultimedia library
# QT_QTNETWORK_LIBRARY The QtNetwork library
# QT_QTNSPLUGIN_LIBRARY The QtNsPLugin library
# QT_QTOPENGL_LIBRARY The QtOpenGL library
# QT_QTSCRIPT_LIBRARY The QtScript library
# QT_QTSQL_LIBRARY The QtSql library
# QT_QTSVG_LIBRARY The QtSvg library
# QT_QTTEST_LIBRARY The QtTest library
# QT_QTUITOOLS_LIBRARY The QtUiTools library
# QT_QTWEBKIT_LIBRARY The QtWebKit library
# QT_QTXML_LIBRARY The QtXml library
# QT_QTXMLPATTERNS_LIBRARY The QtXmlPatterns library
# QT_QTMAIN_LIBRARY The qtmain library for Windows
# QT_PHONON_LIBRARY The phonon library
# QT_QTSCRIPTTOOLS_LIBRARY The QtScriptTools library
#
# The QtDeclarative library: QT_QTDECLARATIVE_LIBRARY
#
# also defined, but NOT for general use are
# QT_MOC_EXECUTABLE Where to find the moc tool.
# QT_UIC_EXECUTABLE Where to find the uic tool.
# QT_UIC3_EXECUTABLE Where to find the uic3 tool.
# QT_RCC_EXECUTABLE Where to find the rcc tool
# QT_DBUSCPP2XML_EXECUTABLE Where to find the qdbuscpp2xml tool.
# QT_DBUSXML2CPP_EXECUTABLE Where to find the qdbusxml2cpp tool.
# QT_LUPDATE_EXECUTABLE Where to find the lupdate tool.
# QT_LRELEASE_EXECUTABLE Where to find the lrelease tool.
# QT_QCOLLECTIONGENERATOR_EXECUTABLE Where to find the qcollectiongenerator tool.
# QT_DESIGNER_EXECUTABLE Where to find the Qt designer tool.
# QT_LINGUIST_EXECUTABLE Where to find the Qt linguist tool.
#
#
# These are around for backwards compatibility
# they will be set
# QT_WRAP_CPP Set true if QT_MOC_EXECUTABLE is found
# QT_WRAP_UI Set true if QT_UIC_EXECUTABLE is found
#
# These variables do _NOT_ have any effect anymore (compared to FindQt.cmake)
# QT_MT_REQUIRED Qt4 is now always multithreaded
#
# These variables are set to "" Because Qt structure changed
# (They make no sense in Qt4)
# QT_QT_LIBRARY Qt-Library is now split
#=============================================================================
# Copyright 2005-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
# Use FIND_PACKAGE( Qt4 COMPONENTS ... ) to enable modules
IF( Qt4_FIND_COMPONENTS )
FOREACH( component ${Qt4_FIND_COMPONENTS} )
STRING( TOUPPER ${component} _COMPONENT )
SET( QT_USE_${_COMPONENT} 1 )
ENDFOREACH( component )
# To make sure we don't use QtCore or QtGui when not in COMPONENTS
IF(NOT QT_USE_QTCORE)
SET( QT_DONT_USE_QTCORE 1 )
ENDIF(NOT QT_USE_QTCORE)
IF(NOT QT_USE_QTGUI)
SET( QT_DONT_USE_QTGUI 1 )
ENDIF(NOT QT_USE_QTGUI)
ENDIF( Qt4_FIND_COMPONENTS )
# If Qt3 has already been found, fail.
IF(QT_QT_LIBRARY)
IF(Qt4_FIND_REQUIRED)
MESSAGE( FATAL_ERROR "Qt3 and Qt4 cannot be used together in one project. If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
ELSE(Qt4_FIND_REQUIRED)
IF(NOT Qt4_FIND_QUIETLY)
MESSAGE( STATUS "Qt3 and Qt4 cannot be used together in one project. If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
ENDIF(NOT Qt4_FIND_QUIETLY)
RETURN()
ENDIF(Qt4_FIND_REQUIRED)
ENDIF(QT_QT_LIBRARY)
INCLUDE(CheckSymbolExists)
INCLUDE(MacroAddFileDependencies)
SET(QT_USE_FILE ${CMAKE_ROOT}/Modules/UseQt4.cmake)
SET( QT_DEFINITIONS "")
# convenience macro for dealing with debug/release library names
MACRO (_QT4_ADJUST_LIB_VARS _camelCaseBasename)
STRING(TOUPPER "${_camelCaseBasename}" basename)
# The name of the imported targets, i.e. the prefix "Qt4::" must not change,
# since it is stored in EXPORT-files as name of a required library. If the name would change
# here, this would lead to the imported Qt4-library targets not being resolved by cmake anymore.
IF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)
IF(NOT TARGET Qt4::${_camelCaseBasename})
ADD_LIBRARY(Qt4::${_camelCaseBasename} UNKNOWN IMPORTED )
IF (QT_${basename}_LIBRARY_RELEASE)
SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_RELEASE "${QT_${basename}_LIBRARY_RELEASE}" )
ENDIF (QT_${basename}_LIBRARY_RELEASE)
IF (QT_${basename}_LIBRARY_DEBUG)
SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_DEBUG "${QT_${basename}_LIBRARY_DEBUG}" )
ENDIF (QT_${basename}_LIBRARY_DEBUG)
ENDIF(NOT TARGET Qt4::${_camelCaseBasename})
# If QT_USE_IMPORTED_TARGETS is enabled, the QT_QTFOO_LIBRARY variables are set to point at these
# imported targets. This works better in general, and is also in almost all cases fully
# backward compatible. The only issue is when a project A which had this enabled then exports its
# libraries via export or EXPORT_LIBRARY_DEPENDENCIES(). In this case the libraries from project
# A will depend on the imported Qt targets, and the names of these imported targets will be stored
# in the dependency files on disk. This means when a project B then uses project A, these imported
# targets must be created again, otherwise e.g. "Qt4__QtCore" will be interpreted as name of a
# library file on disk, and not as a target, and linking will fail:
IF(QT_USE_IMPORTED_TARGETS)
SET(QT_${basename}_LIBRARY Qt4::${_camelCaseBasename} )
SET(QT_${basename}_LIBRARIES Qt4::${_camelCaseBasename} )
ELSE(QT_USE_IMPORTED_TARGETS)
# if the release- as well as the debug-version of the library have been found:
IF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE)
# if the generator supports configuration types then set
# optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
IF (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
SET(QT_${basename}_LIBRARY optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
ELSE(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
# if there are no configuration types and CMAKE_BUILD_TYPE has no value
# then just use the release libraries
SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE} )
ENDIF(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
SET(QT_${basename}_LIBRARIES optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
ENDIF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE)
# if only the release version was found, set the debug variable also to the release version
IF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG)
SET(QT_${basename}_LIBRARY_DEBUG ${QT_${basename}_LIBRARY_RELEASE})
SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE})
SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_RELEASE})
ENDIF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG)
# if only the debug version was found, set the release variable also to the debug version
IF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE)
SET(QT_${basename}_LIBRARY_RELEASE ${QT_${basename}_LIBRARY_DEBUG})
SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_DEBUG})
SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_DEBUG})
ENDIF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE)
# put the value in the cache:
SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY} CACHE STRING "The Qt ${basename} library" FORCE)
ENDIF(QT_USE_IMPORTED_TARGETS)
SET(QT_${basename}_FOUND 1)
ELSE (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)
SET(QT_${basename}_LIBRARY "" CACHE STRING "The Qt ${basename} library" FORCE)
ENDIF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)
IF (QT_${basename}_INCLUDE_DIR)
#add the include directory to QT_INCLUDES
SET(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES})
ENDIF (QT_${basename}_INCLUDE_DIR)
# Make variables changeble to the advanced user
MARK_AS_ADVANCED(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR)
ENDMACRO (_QT4_ADJUST_LIB_VARS)
function(_QT4_QUERY_QMAKE VAR RESULT)
exec_program(${QT_QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output )
if(NOT return_code)
file(TO_CMAKE_PATH "${output}" output)
set(${RESULT} ${output} PARENT_SCOPE)
endif(NOT return_code)
endfunction(_QT4_QUERY_QMAKE)
SET(QT4_INSTALLED_VERSION_TOO_OLD FALSE)
GET_FILENAME_COMPONENT(qt_install_version "[HKEY_CURRENT_USER\\Software\\trolltech\\Versions;DefaultQtVersion]" NAME)
# check for qmake
# Debian uses qmake-qt4
# macports' Qt uses qmake-mac
FIND_PROGRAM(QT_QMAKE_EXECUTABLE NAMES qmake qmake4 qmake-qt4 qmake-mac PATHS
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\4.0.0;InstallDir]/bin"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\4.0.0;InstallDir]/bin"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\${qt_install_version};InstallDir]/bin"
$ENV{QTDIR}/bin
DOC "The qmake executable for the Qt installation to use"
)
IF (QT_QMAKE_EXECUTABLE)
IF(QT_QMAKE_EXECUTABLE_LAST)
STRING(COMPARE NOTEQUAL "${QT_QMAKE_EXECUTABLE_LAST}" "${QT_QMAKE_EXECUTABLE}" QT_QMAKE_CHANGED)
ENDIF(QT_QMAKE_EXECUTABLE_LAST)
SET(QT_QMAKE_EXECUTABLE_LAST "${QT_QMAKE_EXECUTABLE}" CACHE INTERNAL "" FORCE)
SET(QT4_QMAKE_FOUND FALSE)
_qt4_query_qmake(QT_VERSION QTVERSION)
# check for qt3 qmake and then try and find qmake4 or qmake-qt4 in the path
IF("${QTVERSION}" MATCHES "Unknown")
SET(QT_QMAKE_EXECUTABLE NOTFOUND CACHE FILEPATH "" FORCE)
FIND_PROGRAM(QT_QMAKE_EXECUTABLE NAMES qmake4 qmake-qt4 PATHS
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\4.0.0;InstallDir]/bin"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\4.0.0;InstallDir]/bin"
$ENV{QTDIR}/bin
DOC "The qmake executable for the Qt installation to use"
)
IF(QT_QMAKE_EXECUTABLE)
_qt4_query_qmake(QT_VERSION QTVERSION)
ENDIF(QT_QMAKE_EXECUTABLE)
ENDIF("${QTVERSION}" MATCHES "Unknown")
# check that we found the Qt4 qmake, Qt3 qmake output won't match here
STRING(REGEX MATCH "^[0-9]+\\.[0-9]+\\.[0-9]+" qt_version_tmp "${QTVERSION}")
IF (qt_version_tmp)
# we need at least version 4.0.0
IF (NOT QT_MIN_VERSION)
SET(QT_MIN_VERSION "4.0.0")
ENDIF (NOT QT_MIN_VERSION)
#now parse the parts of the user given version string into variables
STRING(REGEX MATCH "^[0-9]+\\.[0-9]+\\.[0-9]+" req_qt_major_vers "${QT_MIN_VERSION}")
IF (NOT req_qt_major_vers)
MESSAGE( FATAL_ERROR "Invalid Qt version string given: \"${QT_MIN_VERSION}\", expected e.g. \"4.0.1\"")
ENDIF (NOT req_qt_major_vers)
# now parse the parts of the user given version string into variables
STRING(REGEX REPLACE "^([0-9]+)\\.[0-9]+\\.[0-9]+" "\\1" req_qt_major_vers "${QT_MIN_VERSION}")
STRING(REGEX REPLACE "^[0-9]+\\.([0-9])+\\.[0-9]+" "\\1" req_qt_minor_vers "${QT_MIN_VERSION}")
STRING(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]+)" "\\1" req_qt_patch_vers "${QT_MIN_VERSION}")
# Suppport finding at least a particular version, for instance FIND_PACKAGE( Qt4 4.4.3 )
# This implementation is a hack to avoid duplicating code and make sure we stay
# source-compatible with CMake 2.6.x
IF( Qt4_FIND_VERSION )
SET( QT_MIN_VERSION ${Qt4_FIND_VERSION} )
SET( req_qt_major_vers ${Qt4_FIND_VERSION_MAJOR} )
SET( req_qt_minor_vers ${Qt4_FIND_VERSION_MINOR} )
SET( req_qt_patch_vers ${Qt4_FIND_VERSION_PATCH} )
ENDIF( Qt4_FIND_VERSION )
IF (NOT req_qt_major_vers EQUAL 4)
MESSAGE( FATAL_ERROR "Invalid Qt version string given: \"${QT_MIN_VERSION}\", major version 4 is required, e.g. \"4.0.1\"")
ENDIF (NOT req_qt_major_vers EQUAL 4)
# and now the version string given by qmake
STRING(REGEX REPLACE "^([0-9]+)\\.[0-9]+\\.[0-9]+.*" "\\1" QT_VERSION_MAJOR "${QTVERSION}")
STRING(REGEX REPLACE "^[0-9]+\\.([0-9])+\\.[0-9]+.*" "\\1" QT_VERSION_MINOR "${QTVERSION}")
STRING(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" QT_VERSION_PATCH "${QTVERSION}")
# compute an overall version number which can be compared at once
MATH(EXPR req_vers "${req_qt_major_vers}*10000 + ${req_qt_minor_vers}*100 + ${req_qt_patch_vers}")
MATH(EXPR found_vers "${QT_VERSION_MAJOR}*10000 + ${QT_VERSION_MINOR}*100 + ${QT_VERSION_PATCH}")
# Support finding *exactly* a particular version, for instance FIND_PACKAGE( Qt4 4.4.3 EXACT )
IF( Qt4_FIND_VERSION_EXACT )
IF(found_vers EQUAL req_vers)
SET( QT4_QMAKE_FOUND TRUE )
ELSE(found_vers EQUAL req_vers)
SET( QT4_QMAKE_FOUND FALSE )
IF (found_vers LESS req_vers)
SET(QT4_INSTALLED_VERSION_TOO_OLD TRUE)
ELSE (found_vers LESS req_vers)
SET(QT4_INSTALLED_VERSION_TOO_NEW TRUE)
ENDIF (found_vers LESS req_vers)
ENDIF(found_vers EQUAL req_vers)
ELSE( Qt4_FIND_VERSION_EXACT )
IF (found_vers LESS req_vers)
SET(QT4_QMAKE_FOUND FALSE)
SET(QT4_INSTALLED_VERSION_TOO_OLD TRUE)
ELSE (found_vers LESS req_vers)
SET(QT4_QMAKE_FOUND TRUE)
ENDIF (found_vers LESS req_vers)
ENDIF( Qt4_FIND_VERSION_EXACT )
ENDIF (qt_version_tmp)
ENDIF (QT_QMAKE_EXECUTABLE)
IF (QT4_QMAKE_FOUND)
# ask qmake for the mkspecs directory
# we do this first because QT_LIBINFIX might be set
IF (NOT QT_MKSPECS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QMAKE_MKSPECS qt_mkspecs_dirs)
# do not replace : on windows as it might be a drive letter
# and windows should already use ; as a separator
IF(NOT WIN32)
STRING(REPLACE ":" ";" qt_mkspecs_dirs "${qt_mkspecs_dirs}")
ENDIF(NOT WIN32)
set(qt_cross_paths)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/mkspecs")
endforeach(qt_cross_path)
SET(QT_MKSPECS_DIR NOTFOUND)
FIND_PATH(QT_MKSPECS_DIR NAMES qconfig.pri
HINTS ${qt_cross_paths} ${qt_mkspecs_dirs}
DOC "The location of the Qt mkspecs containing qconfig.pri")
ENDIF()
IF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri")
FILE(READ ${QT_MKSPECS_DIR}/qconfig.pri _qconfig_FILE_contents)
STRING(REGEX MATCH "QT_CONFIG[^\n]+" QT_QCONFIG "${_qconfig_FILE_contents}")
STRING(REGEX MATCH "CONFIG[^\n]+" QT_CONFIG "${_qconfig_FILE_contents}")
STRING(REGEX MATCH "EDITION[^\n]+" QT_EDITION "${_qconfig_FILE_contents}")
STRING(REGEX MATCH "QT_LIBINFIX[^\n]+" _qconfig_qt_libinfix "${_qconfig_FILE_contents}")
STRING(REGEX REPLACE "QT_LIBINFIX *= *([^\n]*)" "\\1" QT_LIBINFIX "${_qconfig_qt_libinfix}")
ENDIF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri")
IF("${QT_EDITION}" MATCHES "DesktopLight")
SET(QT_EDITION_DESKTOPLIGHT 1)
ENDIF("${QT_EDITION}" MATCHES "DesktopLight")
# ask qmake for the library dir as a hint, then search for QtCore library and use that as a reference for finding the
# others and for setting QT_LIBRARY_DIR
IF (NOT QT_QTCORE_LIBRARY OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_LIBS QT_LIBRARY_DIR_TMP)
SET(QT_QTCORE_LIBRARY_RELEASE NOTFOUND)
SET(QT_QTCORE_LIBRARY_DEBUG NOTFOUND)
FIND_LIBRARY(QT_QTCORE_LIBRARY_RELEASE
NAMES QtCore${QT_LIBINFIX} QtCore${QT_LIBINFIX}4
HINTS ${QT_LIBRARY_DIR_TMP}
NO_CMAKE_PATH NO_CMAKE_ENVIRONMENT_PATH NO_SYSTEM_ENVIRONMENT_PATH
)
FIND_LIBRARY(QT_QTCORE_LIBRARY_DEBUG
NAMES QtCore${QT_LIBINFIX}_debug QtCore${QT_LIBINFIX}d QtCore${QT_LIBINFIX}d4
HINTS ${QT_LIBRARY_DIR_TMP}
NO_CMAKE_PATH NO_CMAKE_ENVIRONMENT_PATH NO_SYSTEM_ENVIRONMENT_PATH
)
# try dropping a hint if trying to use Visual Studio with Qt built by mingw
IF(NOT QT_QTCORE_LIBRARY_RELEASE AND MSVC)
IF(EXISTS ${QT_LIBRARY_DIR_TMP}/libqtmain.a)
MESSAGE( FATAL_ERROR "It appears you're trying to use Visual Studio with Qt built by mingw. Those compilers do not produce code compatible with each other.")
ENDIF(EXISTS ${QT_LIBRARY_DIR_TMP}/libqtmain.a)
ENDIF(NOT QT_QTCORE_LIBRARY_RELEASE AND MSVC)
ENDIF (NOT QT_QTCORE_LIBRARY OR QT_QMAKE_CHANGED)
_QT4_ADJUST_LIB_VARS(QtCore)
# set QT_LIBRARY_DIR based on location of QtCore found.
IF(QT_QTCORE_LIBRARY_RELEASE)
GET_FILENAME_COMPONENT(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_RELEASE}" PATH)
SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE)
SET(QT_QTCORE_FOUND 1)
ELSEIF(QT_QTCORE_LIBRARY_DEBUG)
GET_FILENAME_COMPONENT(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_DEBUG}" PATH)
SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE)
SET(QT_QTCORE_FOUND 1)
ELSE()
MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_LIBS as ${QT_LIBRARY_DIR_TMP}")
MESSAGE("Warning: But QtCore couldn't be found. Qt must NOT be installed correctly, or it wasn't found for cross compiling.")
IF(Qt4_FIND_REQUIRED)
MESSAGE( FATAL_ERROR "Could NOT find QtCore. Check ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log for more details.")
ENDIF(Qt4_FIND_REQUIRED)
ENDIF()
IF (APPLE)
IF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
SET(QT_USE_FRAMEWORKS ON CACHE INTERNAL "" FORCE)
ELSE (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
SET(QT_USE_FRAMEWORKS OFF CACHE INTERNAL "" FORCE)
ENDIF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
MARK_AS_ADVANCED(QT_USE_FRAMEWORKS)
ENDIF (APPLE)
# ask qmake for the binary dir
IF (NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_BINS qt_bins)
SET(QT_BINARY_DIR ${qt_bins} CACHE INTERNAL "" FORCE)
ENDIF (NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED)
# ask qmake for the include dir
IF (QT_LIBRARY_DIR AND (NOT QT_QTCORE_INCLUDE_DIR OR NOT QT_HEADERS_DIR OR QT_QMAKE_CHANGED))
_qt4_query_qmake(QT_INSTALL_HEADERS qt_headers)
SET(QT_QTCORE_INCLUDE_DIR NOTFOUND)
FIND_PATH(QT_QTCORE_INCLUDE_DIR QtCore
HINTS ${qt_headers}
${QT_LIBRARY_DIR}/QtCore.framework/Headers
PATH_SUFFIXES QtCore
)
# Set QT_HEADERS_DIR based on finding QtCore header
IF(QT_QTCORE_INCLUDE_DIR)
IF(QT_USE_FRAMEWORKS)
SET(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE)
ELSE(QT_USE_FRAMEWORKS)
GET_FILENAME_COMPONENT(qt_headers "${QT_QTCORE_INCLUDE_DIR}/../" ABSOLUTE)
SET(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE)
ENDIF(QT_USE_FRAMEWORKS)
ELSEIF()
MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_HEADERS as ${qt_headers}")
MESSAGE("Warning: But QtCore couldn't be found. Qt must NOT be installed correctly.")
ENDIF()
ENDIF()
# Set QT_INCLUDE_DIR based on QT_HEADERS_DIR
IF(QT_HEADERS_DIR)
IF(QT_USE_FRAMEWORKS)
# Qt/Mac frameworks has two include dirs.
# One is the framework include for which CMake will add a -F flag
# and the other is an include dir for non-framework Qt modules
SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR} ${QT_QTCORE_LIBRARY} )
ELSE(QT_USE_FRAMEWORKS)
SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR})
ENDIF(QT_USE_FRAMEWORKS)
ENDIF(QT_HEADERS_DIR)
# Set QT_INCLUDES
SET( QT_INCLUDES ${QT_MKSPECS_DIR}/default ${QT_INCLUDE_DIR} ${QT_QTCORE_INCLUDE_DIR})
# ask qmake for the documentation directory
IF (QT_LIBRARY_DIR AND NOT QT_DOC_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_DOCS qt_doc_dir)
SET(QT_DOC_DIR ${qt_doc_dir} CACHE PATH "The location of the Qt docs" FORCE)
ENDIF (QT_LIBRARY_DIR AND NOT QT_DOC_DIR OR QT_QMAKE_CHANGED)
# ask qmake for the plugins directory
IF (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_PLUGINS qt_plugins_dir)
SET(QT_PLUGINS_DIR NOTFOUND)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/plugins")
endforeach(qt_cross_path)
FIND_PATH(QT_PLUGINS_DIR NAMES accessible imageformats sqldrivers codecs designer
HINTS ${qt_cross_paths} ${qt_plugins_dir}
DOC "The location of the Qt plugins")
ENDIF (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR OR QT_QMAKE_CHANGED)
# ask qmake for the translations directory
IF (QT_LIBRARY_DIR AND NOT QT_TRANSLATIONS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_TRANSLATIONS qt_translations_dir)
SET(QT_TRANSLATIONS_DIR ${qt_translations_dir} CACHE PATH "The location of the Qt translations" FORCE)
ENDIF (QT_LIBRARY_DIR AND NOT QT_TRANSLATIONS_DIR OR QT_QMAKE_CHANGED)
# ask qmake for the imports directory
IF (QT_LIBRARY_DIR AND NOT QT_IMPORTS_DIR OR QT_QMAKE_CHANGED)
_qt4_query_qmake(QT_INSTALL_IMPORTS qt_imports_dir)
if(qt_imports_dir)
SET(QT_IMPORTS_DIR NOTFOUND)
foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH})
set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/imports")
endforeach(qt_cross_path)
FIND_PATH(QT_IMPORTS_DIR NAMES Qt
HINTS ${qt_cross_paths} ${qt_imports_dir}
DOC "The location of the Qt imports"
NO_CMAKE_PATH NO_CMAKE_ENVIRONMENT_PATH NO_SYSTEM_ENVIRONMENT_PATH
NO_CMAKE_SYSTEM_PATH)
mark_as_advanced(QT_IMPORTS_DIR)
endif(qt_imports_dir)
ENDIF (QT_LIBRARY_DIR AND NOT QT_IMPORTS_DIR OR QT_QMAKE_CHANGED)
# Make variables changeble to the advanced user
MARK_AS_ADVANCED( QT_LIBRARY_DIR QT_DOC_DIR QT_MKSPECS_DIR
QT_PLUGINS_DIR QT_TRANSLATIONS_DIR)
#############################################
#
# Find out what window system we're using
#
#############################################
# Save required variable
SET(CMAKE_REQUIRED_INCLUDES_SAVE ${CMAKE_REQUIRED_INCLUDES})
SET(CMAKE_REQUIRED_FLAGS_SAVE ${CMAKE_REQUIRED_FLAGS})
# Add QT_INCLUDE_DIR to CMAKE_REQUIRED_INCLUDES
SET(CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${QT_INCLUDE_DIR}")
# Check for Window system symbols (note: only one should end up being set)
CHECK_SYMBOL_EXISTS(Q_WS_X11 "QtCore/qglobal.h" Q_WS_X11)
CHECK_SYMBOL_EXISTS(Q_WS_WIN "QtCore/qglobal.h" Q_WS_WIN)
CHECK_SYMBOL_EXISTS(Q_WS_QWS "QtCore/qglobal.h" Q_WS_QWS)
CHECK_SYMBOL_EXISTS(Q_WS_MAC "QtCore/qglobal.h" Q_WS_MAC)
IF(Q_WS_MAC)
IF(QT_QMAKE_CHANGED)
UNSET(QT_MAC_USE_COCOA CACHE)
ENDIF(QT_QMAKE_CHANGED)
CHECK_SYMBOL_EXISTS(QT_MAC_USE_COCOA "QtCore/qconfig.h" QT_MAC_USE_COCOA)
ENDIF(Q_WS_MAC)
IF (QT_QTCOPY_REQUIRED)
CHECK_SYMBOL_EXISTS(QT_IS_QTCOPY "QtCore/qglobal.h" QT_KDE_QT_COPY)
IF (NOT QT_IS_QTCOPY)
MESSAGE(FATAL_ERROR "qt-copy is required, but hasn't been found")
ENDIF (NOT QT_IS_QTCOPY)
ENDIF (QT_QTCOPY_REQUIRED)
# Restore CMAKE_REQUIRED_INCLUDES and CMAKE_REQUIRED_FLAGS variables
SET(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_SAVE})
SET(CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS_SAVE})
#
#############################################
########################################
#
# Setting the INCLUDE-Variables
#
########################################
SET(QT_MODULES QtGui Qt3Support QtSvg QtScript QtTest QtUiTools
QtHelp QtWebKit QtXmlPatterns phonon QtNetwork QtMultimedia
QtNsPlugin QtOpenGL QtSql QtXml QtDesigner QtDBus QtScriptTools
QtDeclarative)
IF(Q_WS_X11)
SET(QT_MODULES ${QT_MODULES} QtMotif)
ENDIF(Q_WS_X11)
IF(QT_QMAKE_CHANGED)
FOREACH(QT_MODULE ${QT_MODULES})
STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
SET(QT_${_upper_qt_module}_INCLUDE_DIR NOTFOUND)
SET(QT_${_upper_qt_module}_LIBRARY_RELEASE NOTFOUND)
SET(QT_${_upper_qt_module}_LIBRARY_DEBUG NOTFOUND)
ENDFOREACH(QT_MODULE)
SET(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR NOTFOUND)
SET(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NOTFOUND)
SET(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NOTFOUND)
SET(QT_QTASSISTANTCLIENT_INCLUDE_DIR NOTFOUND)
SET(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NOTFOUND)
SET(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NOTFOUND)
SET(QT_QTASSISTANT_INCLUDE_DIR NOTFOUND)
SET(QT_QTASSISTANT_LIBRARY_RELEASE NOTFOUND)
SET(QT_QTASSISTANT_LIBRARY_DEBUG NOTFOUND)
SET(QT_QTCLUCENE_LIBRARY_RELEASE NOTFOUND)
SET(QT_QTCLUCENE_LIBRARY_DEBUG NOTFOUND)
SET(QT_QAXCONTAINER_INCLUDE_DIR NOTFOUND)
SET(QT_QAXCONTAINER_LIBRARY_RELEASE NOTFOUND)
SET(QT_QAXCONTAINER_LIBRARY_DEBUG NOTFOUND)
SET(QT_QAXSERVER_INCLUDE_DIR NOTFOUND)
SET(QT_QAXSERVER_LIBRARY_RELEASE NOTFOUND)
SET(QT_QAXSERVER_LIBRARY_DEBUG NOTFOUND)
IF(Q_WS_WIN)
SET(QT_QTMAIN_LIBRARY_DEBUG NOTFOUND)
SET(QT_QTMAIN_LIBRARY_RELEASE NOTFOUND)
ENDIF(Q_WS_WIN)
ENDIF(QT_QMAKE_CHANGED)
FOREACH(QT_MODULE ${QT_MODULES})
STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
FIND_PATH(QT_${_upper_qt_module}_INCLUDE_DIR ${QT_MODULE}
PATHS
${QT_HEADERS_DIR}/${QT_MODULE}
${QT_LIBRARY_DIR}/${QT_MODULE}.framework/Headers
NO_DEFAULT_PATH
)
# phonon doesn't seem consistent, let's try phonondefs.h for some
# installations
IF(${QT_MODULE} STREQUAL "phonon")
FIND_PATH(QT_${_upper_qt_module}_INCLUDE_DIR phonondefs.h
PATHS
${QT_HEADERS_DIR}/${QT_MODULE}
${QT_LIBRARY_DIR}/${QT_MODULE}.framework/Headers
NO_DEFAULT_PATH
)
ENDIF(${QT_MODULE} STREQUAL "phonon")
ENDFOREACH(QT_MODULE)
IF(Q_WS_WIN)
SET(QT_MODULES ${QT_MODULES} QAxContainer QAxServer)
# Set QT_AXCONTAINER_INCLUDE_DIR and QT_AXSERVER_INCLUDE_DIR
FIND_PATH(QT_QAXCONTAINER_INCLUDE_DIR ActiveQt
PATHS ${QT_HEADERS_DIR}/ActiveQt
NO_DEFAULT_PATH
)
FIND_PATH(QT_QAXSERVER_INCLUDE_DIR ActiveQt
PATHS ${QT_HEADERS_DIR}/ActiveQt
NO_DEFAULT_PATH
)
ENDIF(Q_WS_WIN)
# Set QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR
FIND_PATH(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR QDesignerComponents
PATHS
${QT_HEADERS_DIR}/QtDesigner
${QT_LIBRARY_DIR}/QtDesigner.framework/Headers
NO_DEFAULT_PATH
)
# Set QT_QTASSISTANT_INCLUDE_DIR
FIND_PATH(QT_QTASSISTANT_INCLUDE_DIR QtAssistant
PATHS
${QT_HEADERS_DIR}/QtAssistant
${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
NO_DEFAULT_PATH
)
# Set QT_QTASSISTANTCLIENT_INCLUDE_DIR
FIND_PATH(QT_QTASSISTANTCLIENT_INCLUDE_DIR QAssistantClient
PATHS
${QT_HEADERS_DIR}/QtAssistant
${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
NO_DEFAULT_PATH
)
########################################
#
# Setting the LIBRARY-Variables
#
########################################
# find the libraries
FOREACH(QT_MODULE ${QT_MODULES})
STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_RELEASE
NAMES ${QT_MODULE}${QT_LIBINFIX} ${QT_MODULE}${QT_LIBINFIX}4
PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH
)
FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_DEBUG
NAMES ${QT_MODULE}${QT_LIBINFIX}_debug ${QT_MODULE}${QT_LIBINFIX}d ${QT_MODULE}${QT_LIBINFIX}d4
PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH
)
ENDFOREACH(QT_MODULE)
# QtUiTools not with other frameworks with binary installation (in /usr/lib)
IF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE)
FIND_LIBRARY(QT_QTUITOOLS_LIBRARY_RELEASE NAMES QtUiTools${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE)
# Set QT_QTDESIGNERCOMPONENTS_LIBRARY
FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NAMES QtDesignerComponents${QT_LIBINFIX} QtDesignerComponents${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NAMES QtDesignerComponents${QT_LIBINFIX}_debug QtDesignerComponents${QT_LIBINFIX}d QtDesignerComponents${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
# Set QT_QTMAIN_LIBRARY
IF(Q_WS_WIN)
FIND_LIBRARY(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
FIND_LIBRARY(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
ENDIF(Q_WS_WIN)
# Set QT_QTASSISTANTCLIENT_LIBRARY
FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
# Set QT_QTASSISTANT_LIBRARY
FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 QtAssistant${QT_LIBINFIX}_debug QtAssistant${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
# Set QT_QTHELP_LIBRARY
FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} QtCLucene${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_DEBUG NAMES QtCLucene${QT_LIBINFIX}_debug QtCLucene${QT_LIBINFIX}d QtCLucene${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
IF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE)
FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE)
############################################
#
# Check the existence of the libraries.
#
############################################
# On OSX when Qt is found as framework, never use the imported targets for now, since
# in this case the handling of the framework directory currently does not work correctly.
IF(QT_USE_FRAMEWORKS)
SET(QT_USE_IMPORTED_TARGETS FALSE)
ENDIF(QT_USE_FRAMEWORKS)
# Set QT_xyz_LIBRARY variable and add
# library include path to QT_INCLUDES
FOREACH(QT_MODULE ${QT_MODULES})
_QT4_ADJUST_LIB_VARS(${QT_MODULE})
ENDFOREACH(QT_MODULE)
_QT4_ADJUST_LIB_VARS(QtAssistant)
_QT4_ADJUST_LIB_VARS(QtAssistantClient)
_QT4_ADJUST_LIB_VARS(QtCLucene)
_QT4_ADJUST_LIB_VARS(QtDesignerComponents)
# platform dependent libraries
IF(Q_WS_WIN)
_QT4_ADJUST_LIB_VARS(qtmain)
_QT4_ADJUST_LIB_VARS(QAxServer)
_QT4_ADJUST_LIB_VARS(QAxContainer)
ENDIF(Q_WS_WIN)
#######################################
#
# Check the executables of Qt
# ( moc, uic, rcc )
#
#######################################
IF(QT_QMAKE_CHANGED)
SET(QT_UIC_EXECUTABLE NOTFOUND)
SET(QT_MOC_EXECUTABLE NOTFOUND)
SET(QT_UIC3_EXECUTABLE NOTFOUND)
SET(QT_RCC_EXECUTABLE NOTFOUND)
SET(QT_DBUSCPP2XML_EXECUTABLE NOTFOUND)
SET(QT_DBUSXML2CPP_EXECUTABLE NOTFOUND)
SET(QT_LUPDATE_EXECUTABLE NOTFOUND)
SET(QT_LRELEASE_EXECUTABLE NOTFOUND)
SET(QT_QCOLLECTIONGENERATOR_EXECUTABLE NOTFOUND)
SET(QT_DESIGNER_EXECUTABLE NOTFOUND)
SET(QT_LINGUIST_EXECUTABLE NOTFOUND)
ENDIF(QT_QMAKE_CHANGED)
FIND_PROGRAM(QT_MOC_EXECUTABLE
NAMES moc-qt4 moc
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_UIC_EXECUTABLE
NAMES uic-qt4 uic
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_UIC3_EXECUTABLE
NAMES uic3
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_RCC_EXECUTABLE
NAMES rcc
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_DBUSCPP2XML_EXECUTABLE
NAMES qdbuscpp2xml
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_DBUSXML2CPP_EXECUTABLE
NAMES qdbusxml2cpp
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_LUPDATE_EXECUTABLE
NAMES lupdate-qt4 lupdate
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_LRELEASE_EXECUTABLE
NAMES lrelease-qt4 lrelease
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_QCOLLECTIONGENERATOR_EXECUTABLE
NAMES qcollectiongenerator-qt4 qcollectiongenerator
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_DESIGNER_EXECUTABLE
NAMES designer-qt4 designer
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
FIND_PROGRAM(QT_LINGUIST_EXECUTABLE
NAMES linguist-qt4 linguist
PATHS ${QT_BINARY_DIR}
NO_DEFAULT_PATH
)
IF (QT_MOC_EXECUTABLE)
SET(QT_WRAP_CPP "YES")
ENDIF (QT_MOC_EXECUTABLE)
IF (QT_UIC_EXECUTABLE)
SET(QT_WRAP_UI "YES")
ENDIF (QT_UIC_EXECUTABLE)
MARK_AS_ADVANCED( QT_UIC_EXECUTABLE QT_UIC3_EXECUTABLE QT_MOC_EXECUTABLE
QT_RCC_EXECUTABLE QT_DBUSXML2CPP_EXECUTABLE QT_DBUSCPP2XML_EXECUTABLE
QT_LUPDATE_EXECUTABLE QT_LRELEASE_EXECUTABLE QT_QCOLLECTIONGENERATOR_EXECUTABLE
QT_DESIGNER_EXECUTABLE QT_LINGUIST_EXECUTABLE)
# get the directory of the current file, used later on in the file
GET_FILENAME_COMPONENT( _qt4_current_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
######################################
#
# Macros for building Qt files
#
######################################
INCLUDE("${_qt4_current_dir}/Qt4Macros.cmake")
######################################
#
# decide if Qt got found
#
######################################
# if the includes,libraries,moc,uic and rcc are found then we have it
IF( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND
QT_UIC_EXECUTABLE AND QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
SET( QT4_FOUND "YES" )
INCLUDE(FindPackageMessage)
FIND_PACKAGE_MESSAGE(Qt4 "Found Qt-Version ${QTVERSION} (using ${QT_QMAKE_EXECUTABLE})"
"[${QT_LIBRARY_DIR}][${QT_INCLUDE_DIR}][${QT_MOC_EXECUTABLE}][${QT_UIC_EXECUTABLE}][${QT_RCC_EXECUTABLE}]")
ELSE( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND
QT_UIC_EXECUTABLE AND QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
SET( QT4_FOUND "NO")
SET(QT_QMAKE_EXECUTABLE "${QT_QMAKE_EXECUTABLE}-NOTFOUND" CACHE FILEPATH "Invalid qmake found" FORCE)
IF( Qt4_FIND_REQUIRED)
MESSAGE( FATAL_ERROR "Qt libraries, includes, moc, uic or/and rcc NOT found!")
ENDIF( Qt4_FIND_REQUIRED)
ENDIF( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND
QT_UIC_EXECUTABLE AND QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
SET(QT_FOUND ${QT4_FOUND})
###############################################
#
# configuration/system dependent settings
#
###############################################
INCLUDE("${_qt4_current_dir}/Qt4ConfigDependentSettings.cmake")
#######################################
#
# compatibility settings
#
#######################################
# Backwards compatibility for CMake1.4 and 1.2
SET (QT_MOC_EXE ${QT_MOC_EXECUTABLE} )
SET (QT_UIC_EXE ${QT_UIC_EXECUTABLE} )
SET( QT_QT_LIBRARY "")
ELSE(QT4_QMAKE_FOUND)
SET(QT_QMAKE_EXECUTABLE "${QT_QMAKE_EXECUTABLE}-NOTFOUND" CACHE FILEPATH "Invalid qmake found" FORCE)
# The code below is overly complex to make sure we do not break compatibility with CMake 2.6.x
# For CMake 2.8, it should be simplified by getting rid of QT4_INSTALLED_VERSION_TOO_OLD and
# QT4_INSTALLED_VERSION_TOO_NEW
IF(Qt4_FIND_REQUIRED)
IF(QT4_INSTALLED_VERSION_TOO_OLD)
IF( Qt4_FIND_VERSION_EXACT )
MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too old, version ${QT_MIN_VERSION} is required")
ELSE( Qt4_FIND_VERSION_EXACT )
MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too old, at least version ${QT_MIN_VERSION} is required")
ENDIF( Qt4_FIND_VERSION_EXACT )
ELSE(QT4_INSTALLED_VERSION_TOO_OLD)
IF( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too new, version ${QT_MIN_VERSION} is required")
ELSE( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
MESSAGE( FATAL_ERROR "Qt qmake not found!")
ENDIF( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
ENDIF(QT4_INSTALLED_VERSION_TOO_OLD)
ELSE(Qt4_FIND_REQUIRED)
IF(QT4_INSTALLED_VERSION_TOO_OLD AND NOT Qt4_FIND_QUIETLY)
MESSAGE(STATUS "The installed Qt version ${QTVERSION} is too old, at least version ${QT_MIN_VERSION} is required")
ENDIF(QT4_INSTALLED_VERSION_TOO_OLD AND NOT Qt4_FIND_QUIETLY)
ENDIF(Qt4_FIND_REQUIRED)
ENDIF (QT4_QMAKE_FOUND)
