https://github.com/root-project/root
Tip revision: a6a0bcaa08667dac8b6ebd4e0c0fae2e3ce958d3 authored by Philippe Canal on 06 March 2006, 23:21:59 UTC
Backport the following patches to v4_04_02:
Backport the following patches to v4_04_02:
Tip revision: a6a0bca
configure
#! /bin/sh
#
# A (not so) simple configure script.
#
# Authors: Christian Holm Christensen and Fons Rademakers
#
# To help with debugging the script, some comments are preprended with
# 3 '#' echo and 3 '%' - replace that pattern with echo and 3 '%' to
# get printouts. When done replace the pattern echo and 3 '%' with the
# original pattern of 3 '#' echo and 3 '%'. Emacs command M-C-% does
# this easily.
#
######################################################################
#
### echo %%% Some global variables
#
found_lib=no
found_dir=no
found_hdr=no
show_pkglist=no
noact="no"
nohowto="no"
options=" \
enable_afs \
enable_alien \
enable_asimage \
enable_builtin_afterimage \
enable_builtin_freetype \
enable_cern \
enable_chirp \
enable_clarens \
enable_dcache \
enable_exceptions \
enable_explicitlink \
enable_globus \
enable_krb5 \
enable_ldap \
enable_mysql \
enable_opengl \
enable_oracle \
enable_peac \
enable_pgsql \
enable_pythia \
enable_pythia6 \
enable_python \
enable_qt \
enable_ruby \
enable_rfio \
enable_rpath \
enable_sapdb \
enable_shadowpw \
enable_shared \
enable_soversion \
enable_srp \
enable_ssl \
enable_table \
enable_thread \
enable_venus \
enable_xml \
enable_xrootd \
"
#
# This sets all options to "yes" - we turn off those we don't want
# on per default explictly afterwards.
#
for c in $options ; do eval $c="yes" ; done
enable_afs=no
enable_explicitlink=no
enable_pythia=no
enable_qt=no
enable_rpath=no
enable_ruby=no
enable_shadowpw=
enable_soversion=no
enable_table=no
enable_thread= # must be set explicitely via --enable-thread
enable_xrootd= # must be set explicitely via --enable-xrootd
#
# ./configure arguments and defaults set via supported env vars
#
envvars="
THREAD \
OPENGL \
IVROOT \
MYSQL \
ORACLE \
PGSQL \
QTDIR \
SAPDB \
RFIO \
CERNLIB \
PYTHIA \
PYTHIA6 \
PYTHONDIR \
VENUS \
DCACHE \
CHIRP \
ALIEN \
ASIMAGE \
LDAP \
GLOBUS_LOCATION \
SRP \
SSL \
AFS \
TABLE \
XMLDIR \
"
configenvvars=
for c in $envvars ; do
cc=`eval echo "$"$c`
if test ! "x$cc" = "x" ; then
if test ! "x$configenvvars" = "x" ; then
configenvvars="$configenvvars $c=$cc"
else
configenvvars="$c=$cc"
fi
fi
done
configargs="$*"
# don't write --nohowto to config.h
configargs=`echo $configargs|sed 's, *--nohowto,,g'`
configoptions=
if test ! "x$configenvvars" = "x" ; then
configoptions=$configenvvars
fi
if test ! "x$configargs" = "x" ; then
if test ! "x$configoptions" = "x" ; then
configoptions="$configoptions $configargs"
else
configoptions=$configargs
fi
fi
######################################################################
#
### echo %%% Some common functions
#
#_____________________________________________________________________
message() {
# Write a simple message to std out
if test $# -lt 1 ; then
echo "message: Too few arguments"
return 1
fi
echo $ac_n "$* ... $ac_c"
}
#_____________________________________________________________________
checking_msg() {
# Write a simple "checking" message to std out.
if test $# -lt 1 ; then
echo "checking_msg: Too few arguments"
return 1
fi
echo $ac_n "Checking for$ac_c"
while test $# -gt 1 ; do
echo $ac_n " $1,$ac_c"
shift
if test $# -eq 1 ; then
echo $ac_n " or$ac_c"
fi
done
echo $ac_n " $1 ... $ac_c"
}
#_____________________________________________________________________
check_library() {
# This function will try to locate a library [$1] in the specific
# directory [$3] or in a default path [$*]. If the second argument
# [$2] is not "no", then shared libraries are favoured.
# The result of the search is stored in found_lib and found_dir,
# which should be immediately copied, since the variables value will
# be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -lt 4 ; then
echo "check_library: Too few arguments"
return 1
fi
# Save arguments in local names
lib=$1 ; shift
shared=$1 ; shift
libdirl=$1 ; shift
libdirs="$*"
# Write a message
checking_msg $lib
# check if we got a specific argument as to where the library
# is to be found
if test ! "x$libdirl" = "x" ; then
libdirs=$libdirl
fi
found_lib=no
found_dir=no
# Make list of libraries to search for. The .lib extension is for
# Windoze - note $shared is always "no" on windoze, since we need
# the .lib export library to link.
libs=""
for i in $lib ; do
for ext in .a .lib "" ; do # lib without extension for MacOS X
libs="$libs $i$ext"
done
done
slibs=""
for i in $lib ; do
for ext in .so .sl .dylib .dll.a ; do # .dll.a for cygwin gcc
slibs="$slibs $i$ext"
done
done
if test ! "x$shared" = "xno" ; then
libs="$slibs $libs"
else
libs="$libs $slibs"
fi
# Loop over the list of possible directories, and see if we can
# find any of the library files as determind above.
for i in $libdirs ; do
# look first in the lib32 directories
if test "x$checklib32" = "xyes" ; then
i32=`echo $i | sed 's|lib*|lib32|'`
#i="$i32 $i"
i="$i32"
fi
# look first in the lib64 directories
if test "x$checklib64" = "xyes" ; then
i64=`echo $i | sed 's|lib*|lib64|'`
#i="$i64 $i"
i="$i64"
fi
# look first in the hpux64 directories
if test "x$checkhpux64" = "xyes" ; then
i64=`echo $i | sed 's|\(lib*\)|\1/hpux64|'`
#i="$i64 $i"
i="$i64"
fi
for l in $i ; do
for j in ${libs} ; do
# if we found the file (it's readable by user), we set the
# logical variables and are on our way, otherwise we continue
liblist=`echo $l/$j` # expands wildcard in $l/$j
for n in ${liblist} ; do
if test -f $n ; then
found_dir=$l
found_lib=$j
break 4
fi
done
done
done
done
# skip cygwin libraries when in pure Win32 mode
if test "x$platform" = "xwin32"; then
case $found_dir in
/lib|/lib/*|/usr/*) found_dir="no" ;;
esac
fi
echo $found_dir
unset libs
unset slibs
unset libdirs
if test "x$found_dir" = "xno" || test "$found_lib" = "xno" ; then
found_dir=""
found_lib=""
else
flib=""
for i in $lib ; do
for ext in .a .lib "" ; do # lib without extension for MacOS X
if test "x$found_lib" = "x$i$ext" ; then
flib=$i$ext
fi
done
done
if test "x$found_lib" = "x$flib" ; then
found_lib=${found_dir}/${found_lib}
found_dir=""
else
found_lib=`echo $found_lib | sed 's|^lib\(.*\)\..*|-l\1|'`
found_dir=-L${found_dir}
# Avoid inclusion of /usr/lib, which is always included anyway
if test "x$found_dir" = "x-L/usr/lib" || \
test "x$found_dir" = "x-L/usr/lib32" || \
test "x$found_dir" = "x-L/usr/lib64" ; then
found_dir=""
fi
fi
# Correct path for win32
if test "x$platform" = "xwin32"; then
if test ! "x$found_lib" = "x" ; then
found_lib=`cygpath -m $found_lib`
fi
if test ! "x$found_dir" = "x" ; then
found_dir=`cygpath -m $found_dir`
fi
fi
fi
unset shared
unset lib
unset flib
unset libdirl
}
#_____________________________________________________________________
check_header() {
# This function will try to locate a header [$1] in the specific
# directory [$2] or in a default path [$*].
# The result of the search is stored in found_hdr and found_dir,
# which should be immediately copied, since the variables value will
# be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -lt 3 ; then
echo "check_header: Too few arguments"
return 1
fi
# Save arguments in logical names
hdrs=$1 ; shift
hdrdir=$1 ; shift
hdrdirs="$*"
# Write a message
checking_msg $hdrs
# Check if we got a specific argument as to where the library
# is to be found
if test ! "x$hdrdir" = "x" ; then
hdrdirs=$hdrdir
fi
found_hdr=no
found_dir=no
# Loop over the list of possible directories, and see if we can
# find any of the library files as determind above.
for i in $hdrdirs; do
for j in ${hdrs} ; do
# if we found the file (it's readable by user), we set the
# logical variables and are on our way, otherwise we continue
if test -r $i/$j ; then
found_dir=$i
found_hdr=$j
break 2
fi
done
done
# skip cygwin headers when in pure Win32 mode
if test "x$platform" = "xwin32"; then
case $found_dir in
/usr/*) found_dir="no" ;;
esac
fi
echo $found_dir
if test "x$found_hdr" = "xno" || test "$found_dir" = "xno" ; then
found_hdr=""
found_dir=""
fi
# Avoid inclusion of /usr/include, which is always included anyway
#if test "x$found_dir" = "x/usr/include" ; then
# found_dir="include"
#fi
# Correct path for win32
if test "x$platform" = "xwin32"; then
if test ! "x$found_hdr" = "x" ; then
found_hdr=`cygpath -m $found_hdr`
fi
if test ! "x$found_dir" = "x" ; then
found_dir=`cygpath -m $found_dir`
fi
fi
unset hdrs
unset hdrdirs
unset hdrdir
}
#_____________________________________________________________________
check_symbol() {
# This function will try to locate a symbol [$1] in a specific
# library [$2] and in a given directory [$3].
# The result of the check is stored in found_symbol, 1 if true,
# 0 otherwise, which should be immediately copied, since the variable
# will be overwritten at next invocation of this function.
# Assert that we got enough arguments
if test $# -ne 3 ; then
echo "check_symbol: not 3 arguments"
found_symbol=0
return 1
fi
# Save arguments in logical names
symbol=$1 ; shift
symbollib=$1 ; shift
symboldir=$1
if test "x$symbollib" = "x" ; then
found_symbol=0
return 1
fi
symbollib=`echo $symbollib | sed -e 's/^-l/lib/'`
if test ! "x$symboldir" = "x" ; then
symboldir=`echo $symboldir | sed -e 's/^-L//'`
fi
# Check if we got a specific argument as to where the library
# is to be found
symbolfile=$symbollib
exts=".so .lib"
if test ! "x$shared" = "xno" ; then
exts="$exts .a"
else
exts=".a $exts"
fi
usrlib="/usr/lib"
# look first in the lib32 directories
if test "x$checklib32" = "xyes" ; then
usrlib="/usr/lib32 $usrlib"
fi
# look first in the lib64 directories
if test "x$checklib64" = "xyes" ; then
usrlib="/usr/lib64 $usrlib"
fi
# look first in the hpux64 directories
if test "x$checkhpux64" = "xyes" ; then
usrlib="/usr/lib/hpux64 $usrlib"
fi
for d in "$symboldir" $usrlib ; do
if test ! -r $d/$symbollib ; then
for i in $exts ; do
if test -r $d/$symbollib$i ; then
symbolfile=$d/$symbollib$i
break 2
fi
done
fi
done
if test "x$symbolfile" = "x" || test ! -r $symbolfile ; then
found_symbol=0
return 1
fi
checking_msg "$symbol in $symbolfile"
symbol_in_lib=`nm $symbolfile 2> /dev/stdout | grep $symbol > /dev/null 2>&1`
if test $? -eq 0 ; then
found_symbol=1
else
nm $symbolfile 2> /dev/stdout | grep "no symbols" > /dev/null 2>&1
if test $? -eq 0 ; then
# stripped library - only safe test is to link against the
# library! However, we do not know what compiler to use
# so we can not do the test. Assume the symbol is in
cat <<EOF > conftest.mk
include config/Makefile.${arch}
conftest:conftest.c $symbolfile
\$(CC) \$(CFLAGS) \$(LDFLAGS) $symbolfile \$< -o \$@
conftest.c:
echo "extern int $symbol (); " > \$@
echo "int main() { $symbol (); return 0; }" >> \$@
EOF
$gnumake -f conftest.mk > /dev/null 2>&1
rm -rf conftest.c conftest.mk conftest
if test $? -eq 0 ; then
found_symbol=1
else
found_symbol=0
fi
else
found_symbol=0
fi
fi
if test $found_symbol -eq 1 ; then
echo "ok"
else
echo "no"
fi
}
#_____________________________________________________________________
guess_architecture () {
# Try to guess the architecture of the host system
# Note, that there's no attempt at guessing the compiler.
# The `native' compiler is used in all cases.
# If a user really want a specifific compiler, s/he better use the
# first argument to do so.
arch=`uname -s | tr '[A-Z]' '[a-z]'`
chip=`uname -m | tr '[A-Z]' '[a-z]'`
rele=`uname -r`
case "$arch:$chip:$rele" in
aix*) arch=aix5 ;;
osf1*:alpha:*) arch=alphacxx6 ;;
freebsd*:*:5*) arch=freebsd5 ;;
freebsd*:*:4*) arch=freebsd4 ;;
freebsd*:*:*) arch=freebsd ;;
hp-ux:ia64:*) arch=hpuxia64acc ;;
hp-ux:*:*) arch=hpuxacc ;;
hurd*:*:*) arch=hurddeb ;;
linux:ia64:*) arch=linuxia64gcc ;;
linux:x86_64:*) arch=linuxx8664gcc ;;
linux:alpha:*) arch=linuxalphaegcs ;;
linux:arm*:*) arch=linuxarm ;;
linux:ppc64*:*) arch=linuxppc64gcc ;;
linux:ppc*:*) arch=linuxppcegcs ;;
linux:i*86:*) arch=linux ;;
openbsd*:*:*) arch=openbsd ;;
lynx:*:*) arch=lynxos ;;
darwin:power*:*) arch=macosx ;;
irix*:sgi*:*) arch=sgicc ;;
sunos:sun*:6*) arch=solarisCC5 ;;
sunos:sun*:5*) arch=solarisCC5 ;;
sunos:sun*:4*) arch=solaris ;;
cygwin_*:*86:*) arch=win32 ;;
cygwin_*:pentium:*) arch=win32 ;;
cygwin_*:ia64) arch=win32 ;;
*)
echo "Attempts at guessing your architecture failed."
echo "Please specify the architecture as the first argument."
echo "Do '$0 --help' for a list of avaliable architectures."
exit 1
;;
esac
}
###################################################################
#
### echo %%% Some skeleton and config files
#
ARCHS=config/ARCHS
MAKEIN=config/Makefile.in
MAKEOUT=config/Makefile.config
CONFIN=config/config.in
CONFOUT=include/config.h
RCONFIN=config/root-config.in
RCONFOUT=bin/root-config
ROOTRCIN=config/rootrc.in
ROOTRCOUT=etc/system.rootrc
ROOTAUTHRCIN=config/rootauthrc.in
ROOTAUTHRCOUT=etc/system.rootauthrc
ROOTDAEMONRCIN=config/rootdaemonrc.in
ROOTDAEMONRCOUT=etc/system.rootdaemonrc
MEMPROBEIN=config/memprobe.in
MEMPROBEOUT=bin/memprobe
MIMEUNIXIN=config/mimes.unix.in
MIMEWIN32IN=config/mimes.win32.in
MIMEOUT=etc/root.mimes
ROOTDIN=config/rootd.in
ROOTDOUT=etc/rootd
ROOTHELPIN=config/root-help.el.in
ROOTHELPOUT=build/misc/root-help.el
HTMLIN=config/html.C.in
HTMLOUT=macros/html.C
######################################################################
#
### echo %%% Testing the echo features
#
if `(echo "testing\c"; echo 1,2,3) | grep c > /dev/null` ; then
if `(echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn > /dev/null`; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
######################################################################
#
### echo %%% Help function
#
confhelp() {
vers=`cat build/version_number`
cat <<EOF
\`configure' configures ROOT $vers to adapt to many kind of systems.
Usage: $0 [architecture] [flag=value]
The architecture to build for will be guessed from the output of 'uname'.
If, however, that fails, or you don't want the 'native' compiler on the
host platform, you can specify the architecture to use by passing as the
FIRST argument one of the architecures given at the end of this message.
FLAG DESCRIPTION DEFAULT
--aclocaldir Autoconf macro install dir(<prefix>/share/aclocal)
--bindir Binary installation dir (<prefix>/bin)
--build Build configuration [debug, exceptions, ...],
overrides the ROOTBUILD shell variable
--cintincdir CINT interpeted headers (<libdir>/cint)
--datadir Data installation dir (<prefix>/share/root)
--docdir Documentation (<prefix>/share/doc/root)
--elispdir Where to put Emacs Lisp (<prefix>/share/emacs/site-lisp)
--etcdir Config installation dir (/etc/root)
--fontdir Font installation dir (<datadir>/fonts)
--iconpath Icon installation dir (<datadir>/icons)
--incdir Header installation dir (<prefix>/include/root)
--libdir Library installation dir (<prefix>/lib/root)
--macrodir Macro installation dir (<datadir>/macros)
--mandir Manpages installation dir (<prefix>/share/man/man1)
--no-create Do not create output files, dry run
--prefix Installation prefix (/usr/local)
--proofdir PROOF utils dir (<datadir>/proof)
--srcdir Sources installation dir (<datadir>/src)
--testdir Tests (<docdir>/test)
--tutdir Tutorials (<docdir>/tutorial)
If any of the flags --cintincdir, --datadir, --docdir, --etcdir, --iconpath
--incdir, --libdir, --macrodir, --mandir, --prefix, or --proofdir is given,
ROOT will be compiled with static directory names, and you should not set
the ROOTSYS environment variable.
enable/disable options, prefix with either --enable- or --disable-
afs AFS support, requires AFS libs and objects
alien AliEn support, requires libAliEnAPI++ from ALICE
asimage Image processing support, requires libAfterImage
builtin-afterimage Built included libAfterImage, or use system libAfterImage
builtin-freetype Built included libfreetype, or use system libfreetype
cern CERNLIB usage, build h2root and g2root
chirp Chirp support (Condor remote I/O), requires libchirp_client
clarens Clarens RPC support, optionally used by PROOF
dcache dCache support, requires libdcap from DESY
exceptions Turn on compiler exception handling capability
explicitlink Explicitly link with all dependent libraries
globus Globus authentication support, requires Globus toolkit
krb5 Kerberos5 support, requires Kerberos libs
ldap LDAP support, requires (Open)LDAP libs
mysql MySQL support, requires libmysqlclient
opengl OpenGL support, requires libGL and libGLU
oracle Oracle support, requires libclntsh
peac PEAC, PROOF Enabled Analysis Center, requires Clarens
pgsql PostgreSQL support, requires libpq
pythia Pythia5 EG support, requires libPythia
pythia6 Pythia6 EG support, requires libPythia6
python Python ROOT bindings, requires python >= 2.1
qt Qt graphics backend, requires libqt >= 3
rfio CASTOR support, requires libshift from CASTOR
rpath Set run-time library load path on executables
ruby Ruby ROOT bindings, requires ruby >= 1.8
sapdb SapDB support, requires libsqlod and libsqlrte
shadowpw Shadow password support
shared Use shared 3rd party libraries if possible
soversion Set version number in sonames (recommended)
srp SRP support, requires SRP source tree
ssl SSL encryption support, requires openssl
table Build libTable contrib library
thread Thread support
venus Venus EG support, requires libVenus
xml XML parser interface
xrootd Build xrootd file server and its client (if supported)
with options, prefix with --with-, enables corresponding support
afs AFS support, location of AFS distribution
alien-incdir AliEn support, location of AliEnAPI++.h
alien-libdir AliEn support, location of libAliEnAPI++
cern-libdir HBOOK converter, location of CERNLIB libraries
chirp-incdir Chirp support, location of chirp_client.h
chirp-libdir Chirp support, location of libchirp_client
dcap-incdir dCache support, location of dcap.h
dcap-libdir dCache support, location of libdcap
globus Globus support, path to what should be GLOBUS_LOCATION
krb5 Kerberos5 support, location of Kerberos distribution
krb5-incdir Kerberos5 support, location of krb5.h
krb5-libdir Kerberos5 support, location of libkrb5
ldap-incdir LDAP support, location of ldap.h
ldap-libdir LDAP support, location of libldap
mysql-incdir MySQL support, location of mysql.h
mysql-libdir MySQL support, location of libmysqlclient
opengl-incdir OpenGL support, location of GL/gl.h
opengl-libdir OpenGL support, location of libGL
oracle-incdir Oracle support, location of occi.h
oracle-libdir Oracle support, location of libclntsh
pgsql-incdir PostgreSQL support, location of libpq-fe.h
pgsql-libdir PostgreSQL support, location of libpq
pythia-libdir PYHTIA support, location of libPythia
pythia6-libdir PYHTIA6 support, location of libPythia6
python-incdir Python support, location of Python.h
python-libdir Python support, location of libpython
qt-incdir Qt support, location of qt.h
qt-libdir Qt support, location of libqt-mt or libqt
ruby-incdir Ruby support, location of ruby.h
ruby-libdir Ruby support, location of libruby
sapdb-incdir SapDB support, location of sql.h
sapdb-libdir SapDB support, location of libsqlod
shift-incdir CASTOR support, location of rfio_api.h
shift-libdir CASTOR support, location of libshift
srp Secure Remote Passwd support, location of SRP distribution
srp-incdir SRP support, location header of t_server.h
srp-libdir SRP support, location header of libsrp.a
ssl-incdir OpenSSL support, location of openssl headers
ssl-libdir OpenSSL support, location of libssl
sys-iconpath Extra icon path
thread-libdir Thread support, path to libpthread
venus-libdir VENUS support, location of libVenus
xml-incdir XML support, location of libxml/tree.h
xml-libdir XML support, location of libxml2
x11-libdir X11 support, path to libX11
xpm-libdir XPM support, path to libXpm
Supported Architectures:
EOF
cat config/ARCHS | sed -e 's/^/ /'
cat <<EOF
Help output is rather long, so you may want to pipe it through a pager, like
for example
$0 --help | more
Report bugs to <rootdev@root.cern.ch>
EOF
}
######################################################################
#
### echo %%% See if we got the architecture
#
if test $# -lt 1 ; then
guess_architecture
else
case $1 in
-h|--help) confhelp ; exit 0 ;;
-*) # in case the first argument wasn't an architecure but an option
guess_architecture
;;
*)
arch=$1
shift
;;
esac
fi
# check that we got a valid architecture
if test "$arch" = "linuxegcs" ; then
arch="linux"
fi
if test "$arch" = "win32gdk" ; then
arch="win32"
fi
if `awk '{ print $1 }' $ARCHS | grep "^$arch$" > /dev/null 2>&1` ; then
echo "Configuring for $arch"
else
echo "Invalid architecture. Try $0 --help"
exit 1
fi
platform=`grep "^PLATFORM *=" config/Makefile.$arch | awk '{ print $3 }'`
case $arch in
sgicc)
checklib32="yes" ;;
linuxx8664*|linuxppc64*|sgicc64)
checklib64="yes" ;;
hpuxia64acc)
checkhpux64="yes" ;;
esac
case $platform in
win32|linux|macosx)
gnumake="make" ;;
*)
gnumake="gmake" ;;
esac
if test "x$platform" = "xmacosx" ; then
finkdir=`which fink 2>&1 | sed -ne "s/\/bin\/fink//p"`
fi
######################################################################
#
### echo %%% Some clean up
#
trap "rm -f Makefile.tmp config.tmp root-config.tmp rootrc.tmp \
rootauthrc.tmp rootdaemonrc.tmp memprobe.tmp rootd.tmp \
conftest.mk conftest.c conftest; exit 1" 1 2 3 15
######################################################################
#
### echo %%% Command line arguments
#
if test $# -gt 0 ; then
while test ! "x$1" = "x" ; do
case "$1" in
-*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac
case $1 in
--help|-h) confhelp ; exit 0 ;;
################################################################
#
# With options to specifiy third part software
#
--no-create) noact="yes" ;;
--nohowto) nohowto="yes" ;;
--with-afs=*) afsdir=$optarg ; enable_afs="yes" ;;
--with-alien-incdir=*) alienincdir=$optarg ; enable_alien="yes" ;;
--with-alien-libdir=*) alienlibdir=$optarg ; enable_alien="yes" ;;
--with-afterimage-incdir=*) afterimageincdir=$optarg; enable_builtin_afterimage=no ;;
--with-afterimage-libdir=*) afterimagelibdir=$optarg; enable_builtin_afterimage=no ;;
--with-cern-libdir=*) cernlibdir=$optarg ; enable_cern="yes" ;;
--with-chirp-incdir=*) chirpincdir=$optarg ; enable_chirp="yes" ;;
--with-chirp-libdir=*) chirplibdir=$optarg ; enable_chirp="yes" ;;
--with-dcap-incdir=*) dcapincdir=$optarg ; enable_dcache="yes" ;;
--with-dcap-libdir=*) dcaplibdir=$optarg ; enable_dcache="yes" ;;
--with-globus=*) globusdir=$optarg ; enable_globus="yes" ;;
--with-krb5=*) krb5dir=$optarg ; enable_krb5="yes" ;;
--with-krb5-incdir=*) krb5incdir=$optarg ; enable_krb5="yes" ;;
--with-krb5-libdir=*) krb5libdir=$optarg ; enable_krb5="yes" ;;
--with-ldap-incdir=*) ldapincdir=$optarg ; enable_ldap="yes" ;;
--with-ldap-libdir=*) ldaplibdir=$optarg ; enable_ldap="yes" ;;
--with-mysql-incdir=*) mysqlincdir=$optarg ; enable_mysql="yes" ;;
--with-mysql-libdir=*) mysqllibdir=$optarg ; enable_mysql="yes" ;;
--with-opengl-incdir=*) openglincdir=$optarg ; enable_opengl="yes" ;;
--with-opengl-libdir=*) opengllibdir=$optarg ; enable_opengl="yes" ;;
--with-oracle-incdir=*) oracleincdir=$optarg ; enable_oracle="yes" ;;
--with-oracle-libdir=*) oraclelibdir=$optarg ; enable_oracle="yes" ;;
--with-pgsql-incdir=*) pgsqlincdir=$optarg ; enable_pgsql="yes" ;;
--with-pgsql-libdir=*) pgsqllibdir=$optarg ; enable_pgsql="yes" ;;
--with-pythia-libdir=*) pythialibdir=$optarg ; enable_pythia="yes" ;;
--with-pythia6-libdir=*) pythia6libdir=$optarg ; enable_pythia6="yes" ;;
--with-python-incdir=*) pythonincdir=$optarg ; enable_python="yes" ;;
--with-python-libdir=*) pythonlibdir=$optarg ; enable_python="yes" ;;
--with-qt-incdir=*) qtincdir=$optarg ; enable_qt="yes" ;;
--with-qt-libdir=*) qtlibdir=$optarg ; enable_qt="yes" ;;
--with-ruby-incdir=*) rubyincdir=$optarg ; enable_ruby="yes" ;;
--with-ruby-libdir=*) rubylibdir=$optarg ; enable_ruby="yes" ;;
--with-sapdb-incdir=*) sapdbincdir=$optarg ; enable_sapdb="yes" ;;
--with-sapdb-libdir=*) sapdblibdir=$optarg ; enable_sapdb="yes" ;;
--with-shift-incdir=*) shiftincdir=$optarg ; enable_rfio="yes" ;;
--with-shift-libdir=*) shiftlibdir=$optarg ; enable_rfio="yes" ;;
--with-srp=*) srpdir=$optarg ; enable_srp="yes" ;;
--with-srp-incdir=*) srpincdir=$optarg ; enable_srp="yes" ;;
--with-srp-libdir=*) srplibdir=$optarg ; enable_srp="yes" ;;
--with-ssl-incdir=*) sslincdir=$optarg ; enable_ssl="yes" ;;
--with-ssl-libdir=*) ssllibdir=$optarg ; enable_ssl="yes" ;;
--with-sys-iconpath=*) extraiconpath=$optarg ;;
--with-thread-libdir=*) threadlibdir=$optarg ; enable_thread="yes" ;;
--with-venus-libdir=*) venuslibdir=$optarg ; enable_venus="yes" ;;
--with-xml-incdir=*) xmlincdir=$optarg ; enable_xml="yes" ;;
--with-xml-libdir=*) xmllibdir=$optarg ; enable_xml="yes" ;;
--with-x11-libdir=*) x11libdir=$optarg ;;
--with-xpm-libdir=*) xpmlibdir=$optarg ;;
################################################################
#
# Enable/disable to turn on/off third party software linkage and
# features
#
--enable-*)
f=`echo $1 | sed -e 's/--//' -e 's/-/_/g'`
eval $f=yes
for c in $options ; do
if test "x$c" = "x$f" ; then
f=""
fi
done
if test "x$f" != "x" ; then
echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;
fi
;;
--disable-*)
f=`echo $1 | sed -e 's/--disable/enable/' -e 's/-/_/g'`
echo "Disabling $f"
eval $f=no
for c in $options ; do
if test "x$c" = "x$f" ; then
f=""
fi
done
if test "x$f" != "x" ; then
echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;
fi
;;
################################################################
#
# Build steering option
#
--build=*) rootbuild="ROOTBUILD := $optarg" ;;
################################################################
#
# Install path options
#
--aclocaldir=*) haveconfig=-DHAVE_CONFIG ; aclocaldir=$optarg ;;
--bindir=*) haveconfig=-DHAVE_CONFIG ; bindir=$optarg ;;
--cintincdir=*) haveconfig=-DHAVE_CONFIG ; cintincdir=$optarg ;;
--datadir=*) haveconfig=-DHAVE_CONFIG ; datadir=$optarg ;;
--docdir=*) haveconfig=-DHAVE_CONFIG ; docdir=$optarg ;;
--elispdir=*) haveconfig=-DHAVE_CONFIG ; elispdir=$optarg ;;
--etcdir=*) haveconfig=-DHAVE_CONFIG ; etcdir=$optarg ;;
--fontdir=*) haveconfig=-DHAVE_CONFIG ; fontdir=$optarg ;;
--iconpath=*) haveconfig=-DHAVE_CONFIG ; iconpath=$optarg ;;
--incdir=*) haveconfig=-DHAVE_CONFIG ; incdir=$optarg ;;
--libdir=*) haveconfig=-DHAVE_CONFIG ; libdir=$optarg ;;
--macrodir=*) haveconfig=-DHAVE_CONFIG ; macrodir=$optarg ;;
--mandir=*) haveconfig=-DHAVE_CONFIG ; mandir=$optarg ;;
--pkglist*) show_pkglist="yes" ; noact="yes" ;;
--prefix*) haveconfig=-DHAVE_CONFIG ; prefix=$optarg ;;
--proofdir=*) haveconfig=-DHAVE_CONFIG ; proofdir=$optarg ;;
--srcdir=*) haveconfig=-DHAVE_CONFIG ; srcdir=$optarg ;;
--testdir=*) haveconfig=-DHAVE_CONFIG ; testdir=$optarg ;;
--tutdir=*) haveconfig=-DHAVE_CONFIG ; tutdir=$optarg ;;
*) echo "Invalid option '$1'. Try $0 --help" ; exit 1 ;;
esac
shift
done
fi
######################################################################
#
### echo %%% Copy skeletons to temporary files
#
if test "x$noact" = "xno"; then
cp -f $MAKEIN Makefile.tmp
cp -f $CONFIN config.tmp
cp -f $RCONFIN root-config.tmp
cp -f $ROOTRCIN rootrc.tmp
cp -f $ROOTAUTHRCIN rootauthrc.tmp
cp -f $ROOTDAEMONRCIN rootdaemonrc.tmp
cp -f $MEMPROBEIN memprobe.tmp
if test ! "x$haveconfig" = "x" ; then
cp -f $ROOTDIN rootd.tmp
fi
fi
######################################################################
#
### echo %%% Should sonames contain version numbers
#
if test "x$enable_soversion" = "xyes"; then
major=`sed 's|\(.*\)\..*/.*|\1|' < build/version_number`
minor=`sed 's|.*\.\(.*\)/.*|\1|' < build/version_number`
revis=`sed 's|.*\..*/\(.*\)|\1|' < build/version_number`
mkliboption="-v $major $minor $revis "
unset major
unset minor
unset revis
fi
######################################################################
#
### echo %%% On Windoze always set enable_shared to no; need .lib
#
if test "x$platform" = "xwin32"; then
enable_shared="no"
fi
######################################################################
#
### echo %%% X11 and XPM Library - Mandatory lib on Unix
#
# Mandatory test, must succeed
# Check for X11 and Xpm library (for X11 use always shared lib)
#
if test ! "$platform" = "win32"; then
check_library "libX11" "yes" "$x11libdir" \
/usr/lib /usr/X11R6/lib /usr/lib/X11 /usr/openwin/lib \
/usr/local/lib /usr/local/lib/X11 /usr/local/X11R6/lib \
/usr/X11/lib /usr/lib/X11R5
x11libdir=$found_dir
if test "x$found_lib" = "x" ; then
echo "`basename $0`: libX11 (package x11-devel) MUST be installed"
exit 1
fi
check_header "X11/Xlib.h" "" \
/usr/include /usr/X11R6/include /usr/include/X11 /usr/openwin/include \
/usr/local/include /usr/local/include/X11 /usr/local/X11R6/include \
/usr/X11/include /usr/include/X11R5
if test "x$found_dir" = "x" ; then
echo "`basename $0`: X11 headers (package x11-devel) MUST be installed"
exit 1
fi
check_library "libXpm" "$enable_shared" "$xpmlibdir" \
$XPM $XPM/lib /usr/local/lib /usr/lib /usr/lib/X11 \
/usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \
/usr/X11/lib
xpmlib=$found_lib
xpmlibdir=$found_dir
if test "x$xpmlib" = "x" ; then
echo "`basename $0`: libXpm MUST be installed"
exit 1
fi
fi
######################################################################
#
### echo %%% Exceptions - compiler feature
#
if test "x$EXCEPTIONS" = "xno" ; then
enable_exceptions=no
fi
e=`echo $rootbuild | sed 's/.*exceptions.*/1/'`
if test "x$e" = "x1" ; then
enable_exceptions=no
fi
######################################################################
#
### echo %%% Posix Thread Library
#
# Check for posix thread library
#
case $platform in
macosx|win32)
if test "x$enable_thread" = "x"; then
enable_thread="yes"
fi
;;
linux|fbsd)
if test "x$enable_thread" = "x" || test "x$enable_thread" = "xyes"; then
enable_thread="yes"
threadflag="-pthread"
threadlib="-pthread"
threadlibdir=
fi
;;
esac
case $arch in
win32gcc)
# if it was not set it was turned on in the above "linux" case
if test "x$enable_thread" = "xyes"; then
threadflag=
threadlib=
fi
;;
hpuxia64acc)
if test "x$enable_thread" = "x"; then
enable_thread="yes"
threadflag="-mt"
threadlib="-mt"
threadlibdir=
fi
;;
esac
if test "x$enable_thread" = "xyes" && \
test ! "$platform" = "win32" && \
test "x$threadlib" = "x" ; then
check_library "libpthread" "$enable_shared" "$threadlibdir" \
$THREAD $THREAD/lib /usr/lib /usr/local/lib /usr/lib/X11 \
/usr/local/lib/X11 /usr/X11R6/lib /usr/local/X11R6/lib \
/usr/X11/lib /usr/shlib
threadlib=$found_lib
threadlibdir=$found_dir
if test "x$threadlib" = "x" ; then
enable_thread="no"
fi
fi
######################################################################
#
### echo %%% libfreetype (builtin or system) - Mandatory lib on Unix
#
# Mandatory test, must succeed
#
if test "x$enable_builtin_freetype" = "x" || \
test "x$enable_builtin_freetype" = "xno" ; then
message "Checking for freetype-config"
if which freetype-config > /dev/null 2>&1 ; then
echo "`which freetype-config`"
message "Checking for libfreetype version >= 9.3.0"
ttf2_version=`freetype-config --version | \
tr '.' ' ' | \
awk 'BEGIN { FS = " "; } \
{ printf "%d", ($''1 * 1000 + $''2) * 1000 + $''3;}'`
# First good version is 9.3.0
if test $ttf2_version -lt 9003000 ; then
echo "no (`freetype-config --version`)"
enable_builtin_freetype="yes"
else
echo "ok"
enable_builtin_freetype="no"
fi
else
enable_builtin_freetype="no"
echo "not found"
fi
fi
message "Checking whether to build included libfreetype6"
echo "$enable_builtin_freetype"
######################################################################
#
### echo %%% OpenGL Support - Third party libraries
#
# (see mesa3d.org)
#
if test ! "x$enable_opengl" = "xno" && test ! "$platform" = "win32" ; then
# Check for OpenGL compatible include and library
check_header "GL/gl.h" "$openglincdir" $OPENGL $OPENGL/include \
/usr/include /usr/include/X11 /usr/X11/include \
/usr/X11R6/include /usr/local/include/X11 \
/usr/local/X11R6/include /usr/local/include \
/usr/include/Mesa /usr/local/include/Mesa /usr/Mesa/include \
/usr/local/Mesa/include /usr/Mesa /usr/local/Mesa /opt/Mesa \
/opt/Mesa/include /opt/graphics/OpenGL/include
openglinc=$found_hdr
openglincdir=$found_dir
opengllibdirs="$OPENGL $OPENGL/lib /usr/lib /usr/local/lib /usr/lib/X11 \
/usr/X11R6/lib /usr/local/lib/X11 /usr/local/X11R6/lib \
/usr/X11/lib /usr/lib/Mesa /usr/local/lib/Mesa /usr/Mesa/lib \
/usr/local/Mesa/lib /usr/Mesa /usr/local/Mesa /opt/Mesa \
/opt/Mesa/lib /opt/graphics/OpenGL/lib"
keep=$opengllibdir
check_library "libGL libMesaGL" "$enable_shared" \
"$opengllibdir" $opengllibdirs
opengllib=$found_lib
opengllibdir=$found_dir
check_library "libGLU libMesaGLU" "$enable_shared" \
"$keep" $opengllibdirs
openglulib=$found_lib
openglulibdir=$found_dir
if test "x$openglincdir" = "x" || \
test "x$opengllib" = "x" || \
test "x$openglulib" = "x" ; then
enable_opengl="no"
fi
fi
######################################################################
#
### echo %%% OpenGL support on Windoze
#
# On win32 we always have OpenGL available (is this true?)
#
if test "$platform" = "win32"; then
enable_opengl="yes"
openglincdir="include"
fi
######################################################################
#
### echo %%% MySQL Support - Third party libraries
#
# (See mysql.org)
#
# If the user has set the flags "--disable-mysql", we don't check for
# MySQL at all.
#
if test ! "x$enable_mysql" = "xno"; then
# Check for MySQL include and library
check_header "mysql.h" "$mysqlincdir" \
$MYSQL $MYSQL/include /usr/local/include /usr/local/include/mysql \
/usr/local/mysql /usr/local/mysql/include /opt/mysql \
/opt/mysql/include /usr/include /usr/include/mysql \
/usr/mysql /usr/mysql/include
mysqlinc=$found_hdr
mysqlincdir=$found_dir
mysqlclientlibs="libmysqlclient mysqlclient"
if test "x$enable_thread" = "xyes"; then
mysqlclientlibs="libmysqlclient_r $mysqlclientlibs"
fi
check_library "$mysqlclientlibs" "$enable_shared" "$mysqllibdir" \
$MYSQL $MYSQL/lib /usr/local/lib /usr/local/lib/mysql \
/usr/local/mysql /usr/local/mysql/lib /opt/mysql /opt/mysql/lib \
/usr/lib /usr/lib/mysql /usr/mysql /usr/mysql/lib
mysqllib=$found_lib
mysqllibdir=$found_dir
# on linux, but maybe also other systems, explicitely add libz
# (formally only needed when linking against the static libmysqlclient.a)
if test ! "x$mysqllib" = "x" ; then
case $platform in
linux) mysqllib="$mysqllib -lz" ;;
esac
fi
if test "x$mysqlincdir" = "x" || test "x$mysqllib" = "x"; then
enable_mysql="no"
fi
fi
######################################################################
#
### echo %%% Oracle Support - Third party libraries
#
# (See oracle.com)
#
# If the user has set the flags "--disable-oracle", we don't check for
# Oracle at all.
#
if test ! "x$enable_oracle" = "xno"; then
# Check for oracle include and library
check_header "occi.h" "$oracleincdir" \
$ORACLE $ORACLE/include $ORACLEINCDIR /usr/local/include \
/usr/include /usr/include/oracle/*/client
oracleinc=$found_hdr
oracleincdir=$found_dir
keeplibdir=$oraclelibdir
check_library "libclntsh" "$enable_shared" "$oraclelibdir" \
$ORACLE $ORACLE/lib $ORACLELIBDIR /usr/local/lib /usr/lib \
/usr/lib/oracle/*/client/lib
oraclelib=$found_lib
oraclelibdir=$found_dir
check_library "libocci" "$enable_shared" "$keeplibdir" \
$ORACLE $ORACLE/lib $ORACLELIBDIR /usr/local/lib /usr/lib
oraclelib="$oraclelib $found_lib"
if test "x$oracleincdir" = "x" || test "x$oraclelib" = "x"; then
enable_oracle="no"
fi
fi
######################################################################
#
### echo %%% PostgreSQL Support - Third party libraries
#
# (See postgresql.org)
#
# If the user has set the flags "--disable-pgsql", we don't check for
# PostgreSQL at all.
#
if test ! "x$enable_pgsql" = "xno"; then
# Check for PgSQL include and library
check_header "libpq-fe.h" "$pgsqlincdir" $PGSQL $PGSQL/include \
/usr/include /usr/local/include /usr/local/pgsql/include \
/usr/include/pgsql /usr/include/postgresql /usr/pgsql/include \
/usr/local/include/pgsql /usr/local/include/postgresql \
/usr/pgsql /usr/local/pgsql /opt/pgsql /opt/pgsql/include
pgsqlinc=$found_hdr
pgsqlincdir=$found_dir
check_library "libpq" "$enable_shared" "$pgsqllibdir" \
$PGSQL $PGSQL/lib /usr/local/pgsql/lib /usr/local/lib \
/usr/lib/pgsql /usr/local/lib/pgsql /usr/pgsql/lib /usr/lib \
/usr/pgsql /usr/local/pgsql /opt/pgsql /opt/pgsql/lib
pgsqllib=$found_lib
pgsqllibdir=$found_dir
if test "x$pgsqlincdir" = "x" || test "x$pgsqllib" = "x"; then
enable_pgsql="no"
fi
fi
######################################################################
#
### echo %%% SapDB Support - Third party libraries
#
# (See www.sapdb.org)
#
# If the user has set the flags "--disable-sapdb", we don't check for
# SapDB at all.
#
if test ! "x$enable_sapdb" = "xno"; then
# Check for SapDB include and library
check_header "sql.h" "$sapdbincdir" $SAPDB $SAPDB/include \
/opt/sapdb/interfaces/odbc/incl /usr/sapdb/interfaces/odbc/incl \
/usr/sapdb/include /usr/local/sapdb/interfaces/odbc/incl \
/usr/sapdb/web/incl /usr/include/sapdb /usr/local/include/sapdb \
/usr/local/sapdb/include /usr/local/sapdb/web/incl /usr/sapdb \
/usr/local/sapdb /opt/sapdb /opt/sapdb/include /opt/sapdb/web/incl
sapdbinc=$found_hdr
sapdbincdir=$found_dir
check_library "libsqlod" "$enable_shared" "$sapdblibdir" \
$SAPDB $SAPDB/lib /opt/sapdb/interfaces/odbc/lib \
/usr/sapdb/interfaces/odbc/lib /usr/spadb/lib \
/usr/local/sapdb/interfaces/odbc/lib /usr/local/sapdb/lib \
/usr/lib/sapdb /usr/local/lib/sapdb /usr/sapdb/lib \
/usr/local/sapdb/lib /usr/sapdb /usr/local/sapdb \
/opt/sapdb /opt/sapdb/lib /usr/sapdb/web/lib \
/usr/local/sapdb/web/lib /opt/sapdb/web/lib
sapdblib=$found_lib
sapdblibdir=$found_dir
if test "x$sapdbincdir" = "x" || test "x$sapdblib" = "x"; then
enable_sapdb="no"
fi
fi
######################################################################
#
### echo %%% Qt Support - Optional alternative graphics backend
#
# If the user has set the flags "--disable-qt", we don't check for
# Qt at all.
#
if test ! "x$enable_qt" = "xno"; then
# Check for Qt include and library
check_header "qt.h" "$qtincdir" $QTDIR $QTDIR/include \
/usr/local/include /usr/local/qt/include /usr/include \
/usr/include/qt /usr/include/qt3
qtinc=$found_hdr
qtincdir=$found_dir
check_library "libqt-mt libqt qt-mt* qt" "$enable_shared" \
"$qtlibdir" $QTDIR $QTDIR/lib /usr/local/lib /usr/local/qt/lib \
/usr/lib /usr/qt/lib
qtlib=$found_lib
qtlibdir=$found_dir
message "Checking for moc or moc.exe"
qtmocexe=`which moc`
if test $? -ne 0 ; then
for i in $QTDIR $QTDIR/bin /usr/local/bin /usr/local/qt/bin /usr/bin \
/usr/qt3/bin ; do
if test -x $i/moc ; then
qtmocexe=$i/moc
break
elif test -x $i/moc.exe ; then
qtmocexe=$i/moc.exe
break
fi
done
fi
echo "$qtmocexe"
if test "x$qtincdir" = "x" || test "x$qtlib" = "x" || \
test "x$qtmocexe" = "x"; then
enable_qt="no"
fi
fi
######################################################################
#
### echo %%% CASTOR Support - Third party libraries
#
# (See http://castor.web.cern.ch/castor/)
#
# Check for rfio_api.h and libshift.a
#
shiftold=""
if test ! "x$enable_rfio" = "xno" ; then
# Check for RFIO include and library
check_header "rfio_api.h" "$shiftincdir" $RFIO $RFIO/include $RFIO/h \
/cern/pro/include /cern/new/include /cern/old/include \
/opt/shift/include /usr/local/shift/inlcude /usr/include/shift \
/usr/local/include/shift /usr/include /usr/local/include
shiftinc=$found_hdr
shiftincdir=$found_dir
if test ! "x$shiftincdir" = "x"; then
message "Checking whether rfio_fchmod declared in $shiftinc"
if `grep rfio_fchmod $shiftincdir/$shiftinc > /dev/null 2>&1` ; then
echo "yes"
else
shiftincdir=""
shiftold="yes"
echo "no"
echo "### Found old version of libshift, please uprade to >=1.5.2"
fi
fi
check_library "libshift shiftmd shift" "$enable_shared" "$shiftlibdir" \
$RFIO $RFIO/lib /cern/pro/lib /cern/new/lib /cern/old/lib \
/opt/shift/lib /usr/local/shift/lib /usr/lib/shift \
/usr/local/lib/shift /usr/lib /usr/local/lib
shiftlib=$found_lib
shiftlibdir=$found_dir
if test "x$shiftincdir" = "x" || test "x$shiftlib" = "x"; then
enable_rfio="no"
else
case $platform in
linux) shiftlib="$shiftlib -lnsl"
for i in "" -ladns ; do
echo "extern rfio_fchmod(); int main() { rfio_fchmod(); return 0; }" > conftest.c
gcc conftest.c $shiftlibdir $shiftlib $i -o conftest > /dev/null 2>&1
if test $? -eq 0 ; then shiftlib="$shiftlib $i" ; break ; fi
done
rm -f conftest.c conftest
;;
solaris) shiftlib="$shiftlib -lposix4" ;;
win32) shiftincdir="$shiftincdir $shiftincdir/../win32"
shiftlib="$shiftlib WSock32.lib Ws2_32.lib" ;;
esac
fi
fi
######################################################################
#
### echo %%% CERNLIB Usage - Third party libraries
#
# (See http://www.cern.ch)
#
# Check for CERN libs (libpacklib and libkernlib)
#
if test ! "x$enable_cern" = "xno"; then
cernlibdirs="$CERNLIB $CERNLIB/lib ${CERN}/${CERN_LEVEL}/lib \
/cern/pro/lib /cern/new/lib /cern/old/lib /opt/cern/pro/lib \
/opt/cern/new/lib /opt/cern/old/lib /usr/local/cern/pro/lib \
/usr/local/cern/new/lib /usr/local/cern/old/lib /usr/lib \
/usr/lib/cern /usr/local/lib /usr/local/lib/cern"
check_library "libpacklib packmd packlib" "$enable_shared" "${cernlibdir}" \
$cernlibdirs
packlib=$found_lib
packlibdir=$found_dir
check_library "libkernlib kernmd kernlib" "$enable_shared" "${cernlibdir}" \
$cernlibdirs
kernlib=$found_lib
kernlibdir=$found_dir
if test ! "x$packlib" = "x" && test "x$enable_rfio" = "xno" ; then
# check if libpacklib contains rfio references, if yes make further check
check_symbol rfio "$packlib" "$packlibdir"
if test $found_symbol -eq 1 ; then
# check if libpacklib contains rfio code (case of < 2002 version)
check_symbol rfio_connect "$packlib" "$packlibdir"
if test $found_symbol -eq 0 ; then
echo "### Need libshift with this version of $packlib"
if test "x$shiftold" = "xyes"; then
echo "### Found old version of libshift, please uprade to >=1.5.2"
else
echo "### Run configure with --enable-rfio or set --with-shift-libdir"
fi
packlib=""
fi
fi
fi
if test "x$packlib" = "x" || test "x$kernlib" = "x"; then
enable_cern="no"
else
cernlib="$packlib $kernlib"
cernlibdir="$packlibdir $kernlibdir"
fi
fi
######################################################################
#
### echo %%% Pythia5 Usage - Third party libraries
#
# (See http://root.cern.ch and Lund)
#
# Check for libPythia
#
if test ! "x$enable_pythia" = "xno"; then
check_library "libPythia" "$enable_shared" "$pythialibdir" \
$PYTHIA $PYTHIA/lib /cern/pro/lib /opt/pythia /opt/pythia5 \
/usr/lib/pythia /usr/local/lib/pythia /usr/lib/pythia5 \
/usr/local/lib/pythia5 /usr/lib /usr/local/lib
pythialib=$found_lib
pythialibdir=$found_dir
if test "x$pythialib" = "x"; then
enable_pythia=no
fi
fi
######################################################################
#
### echo %%% Pythia6 Usage - Third party libraries
#
# (See http://root.cern.ch and Lund)
#
# Check for libPythia6
#
if test ! "x$enable_pythia6" = "xno" ; then
check_library "libPythia6" "$enable_shared" "$pythia6libdir" \
$PYTHIA6 $PYTHIA6/lib /cern/pro/lib /opt/pythia /opt/pythia6 \
/usr/lib/pythia /usr/local/lib/pythia /usr/lib/pythia6 \
/usr/local/lib/pythia6 /usr/lib /usr/local/lib
pythia6lib=$found_lib
pythia6libdir=$found_dir
if test "x$pythia6lib" = "x" ; then
enable_pythia6=no
fi
fi
######################################################################
#
### echo %%% Venus Usage - Third party libraries
#
# (See http://root.cern.ch)
#
# Check for libVenus
#
if test ! "x$enable_venus" = "xno" ; then
check_library "libVenus" "$enable_shared" "$venuslibdir" \
$VENUS $VENUS/lib /cern/pro/lib /opt/venus /usr/lib/venus \
/usr/local/lib/venus /usr/lib /usr/local/lib
venuslib=$found_lib
venuslibdir=$found_dir
if test "x$venuslib" = "x" ; then
enable_venus=no
fi
fi
######################################################################
#
### echo %%% dCache Support - Third party libraries
#
# (See http://www.dcache.org)
#
# Check for libdcap
#
if test ! "x$enable_dcache" = "xno" ; then
check_header "dcap.h" "$dcapincdir" $DCACHE $DCACHE/include \
/opt/d-cache/dcap/include /products/dcache/include \
/opt/dcache/include /usr/include /usr/local/include
dcapincdir=$found_dir
check_library "libdcap" "$enable_shared" "$dcaplibdir" $DCACHE $DCACHE/lib \
/opt/d-cache/dcap/lib /products/dcache/lib /opt/dcache/lib \
/usr/lib /usr/local/lib
dcaplib=$found_lib
dcaplibdir=$found_dir
if test ! "x$dcaplib" = "x" ; then
check_symbol dc_lseek64 "$dcaplib" "$dcaplibdir"
if test $found_symbol -eq 0 ; then
echo "### Need dc_lseek64 in libdcap, upgrade your d-cache client library"
dcaplib=
dcaplibdir=
dcapincdir=
fi
fi
if test "x$dcapincdir" = "x" || test "x$dcaplib" = "x"; then
enable_dcache="no"
fi
fi
######################################################################
#
### echo %%% Chirp Support - Third party libraries
#
# (See http://www.cs.wisc.edu/condor/chirp)
#
# Check for libchirp_client
#
if test ! "x$enable_chirp" = "xno" ; then
check_header "chirp_client.h" "$chirpincdir" $CHIRP $CHIRP/include \
/opt/chirp/include /usr/include /usr/local/include
chirpincdir=$found_dir
#At this time, libchirp_client.a should always be prefered over .so,
#to avoid problems with linkage on grid execute machines.
check_library "libchirp_client" "no" "$chirplibdir" $CHIRP $CHIRP/lib \
/opt/chirp/lib /usr/lib /usr/local/lib
chirplib=$found_lib
chirplibdir=$found_dir
if test "x$chirpincdir" = "x" || test "x$chirplib" = "x"; then
enable_chirp="no"
fi
fi
######################################################################
#
### echo %%% AliEn Support - Third party libraries
#
# (See http://alien.cern.ch)
#
# Check for libAliEnAPI++
#
if test ! "x$enable_alien" = "xno" ; then
check_header "AliEnAPI++.h" "$alienincdir" $ALIEN $ALIEN/include \
/opt/alien/include /usr/local/alien/include /usr/include \
/usr/local/include
alienincdir=$found_dir
if test ! "x$alienincdir" = "x" ; then
alienincdir="$alienincdir $alienincdir/soap"
fi
check_library "libAliEnAPI++" "$enable_shared" "$alienlibdir" \
$ALIEN $ALIEN/lib /opt/alien/lib /usr/local/alien/lib /usr/lib \
/usr/local/lib
alienlib=$found_lib
alienlibdir=$found_dir
if test "x$alienincdir" = "x" || test "x$alienlib" = "x"; then
enable_alien="no"
fi
fi
######################################################################
#
### echo %%% AfterImage Support - Third party libraries
#
# (See http://afterstep.sourceforge.net/afterimage/)
#
# Check for graphics libraries used by libAfterImage, like libjpeg, etc.
#
if test ! "x$enable_asimage" = "xno" ; then
if test "x$enable_builtin_afterimage" = "xno" ||
test "x$enable_builtin_afterimage" = "" ; then
# Figure out if libAfterImage is on the system, and if so, if it usable
asimage_libdirs="$ASIMAGE $ASIMAGE/include \
/usr/lib /usr/local/lib \
/usr/lib/libAfterImage /usr/local/lib/libAfterImage \
/usr/lib/libAfterBase /usr/local/lib/libAfterBase \
/usr/lib/afterstep /usr/local/lib/afterstep \
/usr/lib/libAfter /usr/local/lib/libAfter \
/opt/libAfter"
asimage_incdirs="$ASIMAGE $ASIMAGE/include \
/usr/include /usr/local/include \
/usr/include/libAfterImage /usr/local/include/libAfterImage \
/usr/include/libAfterBase /usr/local/include/libAfterBase \
/usr/include/afterstep /usr/local/include/afterstep \
/usr/include/libAfter /usr/local/include/libAfter \
/opt/libAfter"
asimageincdirtmp=$asimageincdir
check_header "astypes.h" "$asimageincdirtmp" $asimage_incdirs
asimageincdir=$found_dir
asimagetypes=$found_hdr
check_header "afterimage.h" "$asimageincdirtmp" $asimage_incdirs
asimageincdir="$asimageincdir $found_dir"
asimageimage=$found_hdr
asimagelibdirtmp=$asimagelibdir
check_library "libAfterBase" "$enable_shared" "$asimagelibdirtmp" \
$asimage_libdirs
asimagelib=$found_lib
asimagelibdir=$found_dir
check_library "libAfterImage" "$enable_shared" "$asimagelibdirtmp" \
$asimage_libdirs
asimagelib="$asimagelib $found_lib"
asimagelibdir="$asimagelibdir $found_dir"
if test "x$asimageincdir" = "x" \
|| test "x$asimagelib" = "x" \
|| test "x$asimagetypes" = "x" \
|| test "x$asimageimage" = "x" ; then
asimagelib=
asimagelibdir=
asimageincdir=
enable_builtin_afterimage="yes"
fi
unset asimagelibdirtmp
fi
# If we didn't ind the system libAfterImage, or the user didn't ask
# for a system library, then see if we have various headers needed.
if test "x$enable_builtin_afterimage" = "xyes" ; then
check_header "jpeglib.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include $finkdir/include
asjpegincdir=$found_dir
check_header "png.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /usr/local/include/libpng \
/opt/include $finkdir/include
aspngincdir=$found_dir
check_header "tiffio.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include $finkdir/include
astiffincdir=$found_dir
check_header "gif_lib.h" "" $ASIMAGE $ASIMAGE/include \
/usr/local/include /usr/include /opt/include $finkdir/include
asgifincdir=$found_dir
asextralib=""
asextralibdir=""
found_libz=""
found_dirz=""
# libz must be before libpng, if libz is not found don't
# add libpng which needs libz
# don't look for libungif since we use the one built-in in libAfterImage
#for k in libjpeg libtiff libungif libz libpng ; do
for k in libjpeg libtiff libz libpng ; do
check_library $k "$enable_shared" "" \
$ASIMAGE $ASIMAGE/lib /usr/local/lib /usr/lib /opt/lib $finkdir/lib
if test "x$k" = "xlibz" ; then
found_libz=$found_lib
found_dirz=$found_dir
continue;
fi
if test "x$k" = "xlibpng" && test "x$found_libz" = "x" ; then
break;
fi
if test ! "x$found_lib" = "x" ; then
asextralib="$asextralib $found_lib"
asextralibdir="$asextralibdir $found_dir"
fi
done
if test "x$asextralib" = "x" ; then
asextralib=""
asextralibdir=""
asjpegincdir=""
aspngincdir=""
astiffincdir=""
asgifincdir=""
else
asextralib="$asextralib $found_libz"
asextralibdir="$asextralibdir $found_dirz"
fi
fi
message "Checking whether to build included libAfterImage"
echo "$enable_builtin_afterimage"
fi
######################################################################
#
### echo %%% LDAP Support - Third party libraries
#
# (See openldap.org)
#
# If the user has set the flags "--disable-ldap", we don't check for
# LDAP at all.
#
if test ! "x$enable_ldap" = "xno"; then
# Check for ldap include and library
check_header "ldap.h" "$ldapincdir" $LDAP $LDAP/include \
/usr/include /usr/local/include /usr/local/ldap/include \
/usr/include/ldap /usr/include/openldap /usr/ldap/include \
/usr/local/include/ldap /usr/local/include/openldap \
/usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/include
ldapinc=$found_hdr
ldapincdir=$found_dir
ldaplib=""
ldaplibdir=""
for i in libldap liblber ; do
check_library $i "$enable_shared" "" $ldaplibdir \
$LDAP $LDAP/lib /usr/local/ldap/lib /usr/local/lib \
/usr/lib/ldap /usr/local/lib/ldap /usr/ldap/lib /usr/lib \
/usr/ldap /usr/local/ldap /opt/ldap /opt/ldap/lib
if test "x$found_lib" = "x" ; then
ldaplib=""
ldaplibdir=""
enable_ldap="no"
break
fi
ldaplib="$ldaplib $found_lib"
ldaplibdir="$ldaplibdir $found_dir"
done
if test "x$ldapincdir" = "x" || test "x$ldaplib" = "x"; then
enable_ldap="no"
fi
fi
######################################################################
#
### echo %%% Python - Optional alternative interpreter
#
# (See http://www.python.org)
#
if test ! "x$enable_python" = "xno" ; then
# Check for Python include and library
check_header "Python.h" "$pythonincdir" \
$PYTHONDIR/include/python2.4 $PYTHONDIR/include/python2.3 \
$PYTHONDIR/include/python2.2 $PYTHONDIR/include \
/usr/local/include/python2.4 /usr/local/include/python2.3 \
/usr/local/include/python2.2 \
/usr/include/python2.4 /usr/include/python2.3 /usr/include/python2.2 \
/System/Library/Frameworks/Python.framework/Versions/2.4/include/python2.4 \
/System/Library/Frameworks/Python.framework/Versions/2.3/include/python2.3 \
/cygdrive/c/Python24/include /cygdrive/c/Python23/include \
/cygdrive/c/Python22/include
pythoninc=$found_hdr
pythonincdir=$found_dir
check_library "libpython2.4 libpython2.3 libpython2.2 python24 python23 \
Python" \
"$enable_shared" "$pythonlibdir" \
$PYTHONDIR/lib/python2.4/config $PYTHONDIR/lib/python2.3/config \
$PYTHONDIR/lib/python2.2/config $PYTHONDIR/lib $PYTHONDIR/libs \
/usr/local/lib/python2.4/config /usr/local/lib/python2.3/config \
/usr/local/lib/python2.2/config \
/usr/lib/python2.4/config /usr/lib/python2.3/config \
/usr/lib/python2.2/config \
/System/Library/Frameworks/Python.framework/Versions/2.4 \
/System/Library/Frameworks/Python.framework/Versions/2.3 \
/cygdrive/c/Python24/libs /cygdrive/c/Python23/libs \
/cygdrive/c/Python22/libs
pythonlib=$found_lib
pythonlibdir=$found_dir
if test "x$pythonincdir" = "x" || test "x$pythonlib" = "x"; then
enable_python="no"
else
pythonlibflags=
case $platform in
win32) pythonlibflags="-nodefaultlib:python23" ;;
esac
fi
fi
######################################################################
#
### echo %%% Ruby - Optional alternative interpreter
#
# (See http://www.ruby-lang.org)
#
if test ! "x$enable_ruby" = "xno" ; then
# Check for Ruby include and library
myruby=`which ruby 2> /dev/null`
if test ! "x$myruby" = "x" && test -x "$myruby" ; then
rubysysincdir=`ruby -rrbconfig -e 'puts Config::CONFIG["archdir"]'`
rubysyslibdir=`ruby -rrbconfig -e 'puts Config::CONFIG["libdir"]'`
fi
check_header "ruby.h" "$rubyincdir" $RUBYDIR $RUBYDIR/include \
$rubysysincdir
rubyinc=$found_hdr
rubyincdir=$found_dir
if test "x$arch" = "xwin32" || \
test "x$enable_shared" = "xno" ; then
check_library_options="libruby-static libruby1.8-static"
else
check_library_options="libruby libruby1.8"
fi
check_library "$check_library_options" \
"$enable_shared" "$rubylibdir" $RUBYDIR $RUBYDIR/lib \
$rubysyslibdir
rubylib=$found_lib
rubylibdir=$found_dir
if test "x$rubyincdir" = "x" || test "x$rubylib" = "x"; then
enable_ruby="no"
else
# Ruby support requires the explicitlink option
enable_explicitlink="yes"
fi
fi
######################################################################
#
### echo %%% xml - the XML parser interface
#
# (See http://www.xmlsoft.org)
#
# If the user has set the flags "--disable-xml", we don't check for
# XML at all.
#
if test ! "x$enable_xml" = "xno" ; then
# Check for xml include and library
keepinc=$xmlincdir
check_header "libxml/tree.h" "$xmlincdir" $XMLDIR $XMLDIR/include \
/opt/libxml2/include /usr/local/include/libxml2 /usr/include/libxml2
xmlincdir=$found_dir
keeplibdir=$xmllibdir
check_library "libxml2_a libxml2" "$enable_shared" "$xmllibdir" $XMLDIR \
$XMLDIR/lib $XMLDIR/.libs /opt/libxml2/lib /usr/local/lib /usr/lib
xmllib=$found_lib
xmllibdir=$found_dir
if test "x$platform" = "xwin32"; then
check_header "iconv.h" "$keepinc" $ICONVDIR $ICONVDIR/include \
$XMLDIR $XMLDIR/include \
/opt/libxml2/include /usr/local/include/libxml2 /usr/include/libxml2
iconvincdir=$found_dir
check_library "iconv_a" "$enable_shared" "$keeplibdir" $ICONVDIR \
$ICONVDIR/lib $XMLDIR $XMLDIR/lib $XMLDIR/.libs \
/opt/libxml2/lib /usr/local/lib /usr/lib
iconvlib=$found_lib
iconvlibdir=$found_dir
else
iconvincdir=$xmlincdir
iconvlib="-liconv"
fi
if test "x$xmlincdir" = "x" || test "x$xmllib" = "x" ||
test "x$iconvincdir" = "x" || test "x$iconvlib" = "x" ; then
xmlincdir=""
enable_xml="no"
else
case $arch in
win32gcc) xmllib="$xmllib -liconv" ;;
esac
case $platform in
linux) xmllib="$xmllib -lpthread" ;;
solaris) xmllib="$xmllib -liconv" ;;
win32) xmlincdir="$xmlincdir $iconvincdir"
xmllib="$xmllib $iconvlib Ws2_32.lib" ;;
esac
fi
fi
######################################################################
#
### echo %%% Check for xrootd support
#
message "Checking whether to build xrootd"
xrdcomm=""
# Xrootd and its client need thread support
if test "x$enable_thread" = "xyes"; then
# Ok, now check the architecture
case $arch in
# The server builds on Linux and Solaris only (for the time being)
linux*)
if test "x$enable_xrootd" = "x"; then
enable_xrootd="yes"
fi
;;
macos*)
if test "x$enable_xrootd" = "x"; then
enable_xrootd="yes"
fi
;;
solaris*)
if test "x$enable_xrootd" = "x"; then
enable_xrootd="yes"
fi
;;
*)
if test "x$enable_xrootd" = "xyes"; then
enable_xrootd="yes"
xrdcomm=", but not officially supported"
else
enable_xrootd="no"
fi
;;
esac
else
if test "x$enable_xrootd" = "xyes"; then
enable_xrootd="no"
xrdcomm=", needs thread support (rerun with --enable-thread)"
else
enable_xrootd="no"
fi
fi
echo $enable_xrootd$xrdcomm
if test "x$enable_xrootd" = "xyes"; then
buildxrd="yes"
hasnetx=""
else
buildxrd="no"
hasnetx="#"
fi
######################################################################
#
### echo %%% Globus Support - Third party libraries
#
# (See www.globus.org)
#
# If the user has set the flags "--disable-globus", we don't check for
# Globus at all.
#
glbextracflags=""
glbpatchcflags=""
haveglobus=""
if test ! "x$enable_globus" = "xno"; then
# Check if the GLOBUS_LOCATION variable is set
if test "x$globusdir" = "x" ; then
echo "Checking for globusdir ... no"
if test "x$GLOBUS_LOCATION" = "x" ; then
globusdir=""
enable_globus="no"
echo "Checking for GLOBUS_LOCATION ... no"
else
globusdir=$GLOBUS_LOCATION
echo "Checking for GLOBUS_LOCATION ... $GLOBUS_LOCATION"
fi
fi
fi
if test "x$enable_globus" = "xyes"; then
pthr="pthr"
#determine flavour tag of the building
flavour=""
if test -d $globusdir/include/gcc32; then
flavour="gcc32"
else
flavour="gcc32dbg"
fi
globusincdir=""
globuslibdir=""
searchincdir=$globusdir/include
inclist="openssl/x509.h openssl/pem.h globus_gss_assist.h globus_common.h"
for i in $inclist ; do
check_header $i "" "$searchincdir/$flavour"
if test "x$found_hdr" = "x" ; then
globusinc=""
globusincdir=""
enable_globus="no"
break
fi
globusinc="$globusinc $found_hdr"
if test "x$globusincdir" = "x" ; then
globusincdir=$found_dir
else
for k in $globusincdir ; do
if test "x$k" != "x$found_dir" ; then
globusincdir="$found_dir $globusincdir"
fi
done
fi
done
fi
if test "x$enable_globus" = "xyes"; then
# With more recent versions we need an additional header
check_header globus_gsi_credential.h "" "$searchincdir/$flavour"
gsiversion="no"
if test ! "x$found_hdr" = "x" ; then
gsiversion="yes"
globusinc="$globusinc $found_hdr"
if test "x$globusincdir" = "x" ; then
globusincdir=$found_dir
else
for k in $globusincdir ; do
if test "x$k" != "x$found_dir" ; then
globusincdir="$found_dir $globusincdir"
fi
done
fi
gsicredentialh=$found_dir/globus_gsi_credential.h
echo "Checking for gsi version ... yes"
else
echo "Checking for gsi version ... no"
check_header sslutils.h "" "$searchincdir/$flavour"
if test ! "x$found_hdr" = "x" ; then
globusinc="$globusinc $found_hdr"
if test "x$globusincdir" = "x" ; then
globusincdir=$found_dir
else
for k in $globusincdir ; do
if test "x$k" != "x$found_dir" ; then
globusincdir="$found_dir $globusincdir"
fi
done
fi
else
globusinc=""
globusincdir=""
enable_globus="no"
fi
fi
fi
if test "x$enable_globus" = "xyes"; then
globuslib=""
if test ! "x$globusdir" = "x" ; then
searchlibdir=$globusdir/lib
fi
for i in libglobus_gss_assist_$flavour libglobus_gssapi_gsi_$flavour \
libssl_$flavour libcrypto_$flavour ; do
check_library $i "$enable_shared" "$searchlibdir" /usr/lib \
/usr/local/lib
if test "x$found_lib" = "x" ; then
globuslib=""
globuslibdir=""
enable_globus="no"
break
fi
globuslib="$globuslib $found_lib"
if test "x$globuslibdir" = "x" ; then
globuslibdir=$found_dir
else
for k in $globuslibdir ; do
if test "x$k" != "x$found_dir" ; then
globuslibdir="$found_dir $globuslibdir"
fi
done
fi
done
fi
if test "x$enable_globus" = "xyes"; then
# In more recent versions some functions are found in a separated library
# so, if it exists, add it to the list
check_library libglobus_gsi_credential_$flavour "$enable_shared" \
"$searchlibdir" /usr/lib /usr/local/lib
if test ! "x$found_lib" = "x" ; then
globuslib="$globuslib $found_lib"
if test "x$globuslibdir" = "x" ; then
globuslibdir=$found_dir
else
for k in $globuslibdir ; do
if test "x$k" != "x$found_dir" ; then
globuslibdir="$found_dir $globuslibdir"
fi
done
fi
fi
# Need to source this before init proxies
sourcepath=""
if test -s $globusdir/etc/globus-user-env.sh ; then
sourcepath="$globusdir/etc"
fi
if test "x$sourcepath" = "x" ; then
echo "Checking for globus-user-env.sh ... no (cannot run as client)"
else
echo "Checking for globus-user-env.sh ... $sourcepath"
fi
# Need this to init proxies
initpath=""
if test -s $globusdir/bin/grid-proxy-init ; then
initpath="$globusdir/bin"
fi
if test "x$sourcepath" = "x" ; then
echo "Checking for grid-proxy-init ... no (cannot run as client)"
else
echo "Checking for grid-proxy-init ... $initpath"
fi
if test "x$globusincdir" = "x" || test "x$globuslib" = "x"; then
globuslib=""
enable_globus="no"
else
haveglobus="globus"
fi
fi
if test "x$enable_globus" = "xyes"; then
glbextracflags="-DR__GLBS"
if test "x$gsiversion" = "xyes" ; then
glbextracflags="$glbextracflags -DR__GLBS22"
fi
# Everything seems ok: now check if there is the need for a patch
patchneeded="no"
tobepatched="globus_gsi_credential"
package="globus_gsi_credential"
version=""
# No explicit version given: try to find version out from gpt files ...
packdir="$globusdir/etc/globus_packages/$package"
if test -d $packdir ; then
for i in pkg_data_${flavour}_rtl.gpt pkg_data_${flavour}_dev.gpt ; do
if test -r $packdir/$i ; then
packfileinfo=$packdir/$i
break
fi
done
version=""
if test ! "x$packfileinfo" = "x" ; then
packfiletmp=`basename $packfileinfo`
echo "Checking for $packfiletmp ... $packdir"
versionstring=`grep Minor $packfileinfo`
for i in $versionstring ; do
for k in 5 7 8 9 ; do
if test "Minor=\"$k\"" = "$i" ; then
version="0.$k"
break 2
fi
done
done
fi
if test "x$version" = "x" ; then
patchneeded="no"
echo "Checking for need of globus patch ... no"
else
patchneeded="yes"
echo "Checking for need of globus patch ... yes, version $version"
# Check consistency: get reference versions
gsicredconstantsh=`echo $gsicredentialh | sed 's|credential.h|cred_constants.h|'`
grepout=`grep "Revision:" $gsicredentialh`
grepout=`echo "$grepout" | sed 's|Revision:||'`
for i in $grepout ; do
if test ! "x$i" = "x\$"; then
gcver=$i
fi
done
grepout=`grep "Revision:" $gsicredconstantsh`
grepout=`echo "$grepout" | sed 's|Revision:||'`
for i in $grepout ; do
if test ! "x$i" = "x\$"; then
gccver=$i
fi
done
# Get info from map file
vertmp=""
mismatch="no"
mapfile="globusauth/src/patches/$tobepatched/map"
exec 10< $mapfile
read v1 v2 v3 <&10
while [ ! "x$v1" = "x" ] ; do
if test "x$v1" = "x$version" ; then
if test ! "x$gcver" = "x$v2" || test ! "x$gccver" = "x$v3"; then
mismatch="yes"
fi
fi
if test "x$gcver" = "x$v2" && test "x$gccver" = "x$v3"; then
vertmp=$v1
fi
read v1 v2 v3 <&10
done
# Final check
message "Checking for patch version consistency"
if test "x$mismatch" = "xyes" ; then
if test ! "x$vertmp" = "x" ; then
version=$vertmp
echo "no: guess value from map file: $version"
else
echo "no: unable to guess value from map file: keep $version"
fi
else
echo "yes"
fi
fi
else
echo "Checking for need of globus patch ... information directory not available"
fi
# Now find includes needed for patch, if the case
if test "x$patchneeded" = "xyes" ; then
# build patching flags
glbpatchcflags="-DR__GLBCPATCH"
for i in globus_gsi_system_config.h globus_gsi_cert_utils.h ; do
dirtmp=`find $globusincdir -name $i -exec dirname {} \;`
if test ! "x$dirtmp" = "x" ; then
echo "Checking for $i ... $dirtmp"
add="yes"
for k in $glbpatchcflags ; do
if test "x$k" = "x-I$dirtmp" ; then
add="no"
fi
done
if test "x$add" = "xyes" ; then
glbpatchcflags="$glbpatchcflags -I$dirtmp"
fi
else
echo "Checking for $i ... no (globus patch not applied)"
patchneeded="no"
glbpatchcflags=""
break
fi
done
fi
if test "x$patchneeded" = "xyes" ; then
# Path with patched files and includes
globuspatchdir="globusauth/src/patches/$tobepatched/$version"
# copy patched file in the globusauth/src directory
cp -rp $globuspatchdir/$tobepatched.c globusauth/src/$tobepatched.c
glbpatchcflags="$glbpatchcflags -I$globuspatchdir/include"
if test ! "x$glbpatchcflags" = "x" ; then
echo "Applying experimental patch to $tobepatched.c"
fi
fi
fi
######################################################################
#
### echo %%% SSL Support - Third party libraries
#
# (See www.openssl.org)
#
# For public and symmetric key encryption. If missing, the local rsa
# simple implementation is used to protect password exchange.
# If configured with support for Globus/GSI authentication,
# use the SSL libraries coming with the globus tool kit to avoid
# conflicts.
#
if test "x$enable_ssl" = "xyes" ; then
libssl="libssl libcrypto"
if test "x$enable_globus" = "xyes" ; then
libssl="libssl_$flavour libcrypto_$flavour"
tmpglbslibdir="$globusdir/lib"
else
tmpglbslibdir=$ssllibdir
fi
for i in $libssl ; do
check_library "$i" "$enable_shared" "$tmpglbslibdir" \
$SSL $SSL/lib /usr/lib /usr/local/lib /opt/lib $finkdir/lib
if test "x$found_lib" = "x" ; then
ssllib=""
ssllibdir=""
enable_ssl="no"
break
fi
if test "x$ssllib" = "x" ; then
ssllib="$found_lib"
ssllibdir="$found_dir"
else
ssllib="$ssllib $found_lib"
ssllibdir="$ssllibdir $found_dir"
fi
done
fi
if test "x$enable_ssl" = "xyes" ; then
incssl="bio.h blowfish.h err.h pem.h rand.h rsa.h"
if test "x$enable_globus" = "xyes" ; then
tmpglbsincdir="$globusdir/include/$flavour"
else
tmpglbsincdir=$sslincdir
fi
for i in $incssl ; do
check_header "openssl/$i" "$tmpglbsincdir" $SSL $SSL/include \
/usr/include /usr/local/include /opt/include $finkdir/include
if test "x$found_hdr" = "x" ; then
ssl_incdir=""
enable_ssl="no"
break
fi
if test "x$ssl_incdir" = "x" ; then
ssl_incdir=$found_dir
else
for i in $ssl_incdir ; do
if test "x$i" != "x$found_dir" ; then
ssl_incdir="$found_dir $ssl_incdir"
fi
done
fi
done
fi
if test "x$enable_ssl" = "xno" ; then
ssllib=""
ssllibdir=""
sslincdir=""
sslextracflags=""
else
sslincdir=$ssl_incdir
sslextracflags="-DR__SSL"
fi
######################################################################
#
### echo %%% SRP Support - Third party libraries
#
# (See http://srp.stanford.edu/srp)
# Note: You can not make do with the libsrp package. You need the full
# source for this add-on.
#
# Check for SRP (libsrp.a)
#
srpextracflags=""
havesrp=""
if test ! "x$enable_srp" = "xno" ; then
if test "x$srpincdir" = "x" && test ! "x$srpdir" = "x" ; then
srpincdir=$srpdir/include
if test ! -d $srpincdir ; then
srpincdir=$srpdir/libsrp
fi
fi
check_header "t_server.h" "$srpincdir" $SRP/include $SRP/libsrp \
/usr/srp/include /usr/include /usr/include/srp /usr/local/include \
/usr/local/srp/include /usr/local/include/srp
srpinc=$found_hdr
srpincdir=$found_dir
if test "x$srpincdir" = "x" ; then
enable_srp="no"
fi
if test "x$srplibdir" = "x" && test ! "x$srpdir" = "x" ; then
srplibdir=$srpdir/lib
if test ! -d $srplibdir ; then
srplibdir=$srpdir/libsrp
fi
fi
srplibdirs="$SRP $SRP/lib $SRP/libsrp /usr/srp/lib /usr/local/srp/lib \
/usr/lib/srp /usr/local/lib/srp /usr/lib /usr/local/lib"
check_library "libsrp" "no" "$srplibdir" $srplibdirs
srplib=$found_lib
srplibdir=$found_dir
check_symbol BN_new "$srplib" "$srplibdir"
if test $found_symbol -eq 0 ; then
check_library "libgmp" "$enable_shared" "" $srplibdir $srplibdirs
gmplib=$found_lib
gmplibdir=$found_dir
else
check_library "libcrypto" "$enable_shared" "" $srplibdir $srplibdirs
cryptolib=$found_lib
cryptolibdir=$found_dir
if test -r $cryptolib && test "x$enable_shared" = "xno" ; then
case $platform in
linux) cryptolib="$cryptolib -ldl"
esac
fi
fi
if test "x$srplib" = "x" ; then
enable_srp="no"
srplibdir=""
elif test "x$gmplib" = "x" && test "x$cryptolib" = "x" ; then
enable_srp="no"
gmplibdir=""
else
srplib="$srplib $gmplib"
srplibdir="$srplibdir $gmplibdir"
fi
srputillib=""
srputillibdir=""
srplibdirs="$srpdir/base/libmisc $srpdir/base/lib \
$SRP/base/libmisc $SRP/base/lib \
/usr/local/srp/lib /usr/local/lib/srp /usr/srp/lib /usr/lib/srp \
/usr/local/lib /usr/lib"
for i in libmisc libshadow ; do
check_library "$i" "no" "" $srplibdirs
if test "x$found_lib" = "x" ; then
srputillib=""
srputillibdir=""
enable_srp="no"
break
fi
srputillib="$srputillib $found_lib"
srputillibdir="$srputillibdir $found_dir"
done
if test ! "x$srpdir" = "x" ; then
srputilincdir=$srpdir/base/lib
fi
check_header "pwauth.h" "$srputilincdir" $SRP $SRP/base/lib \
/usr/local/srp/base/lib /usr/srp/base/lib
srputilincdir=$found_dir
if test "x$srputilincdir" = "x" ; then
enable_srp="no"
fi
if test "x$enable_srp" = "xno" ; then
srplib=""
srputillib=""
else
srpextracflags="-DR__SRP"
havesrp="srp"
fi
fi
######################################################################
#
### echo %%% AFS Support - Third party libraries
#
# (See http://www.openafs.org)
#
# Check for AFS (libdes.a)
#
if test ! "x$enable_afs" = "xno" ; then
if test ! "x$afsdir" = "x" ; then
afsdir="$afsdir $afsdir/afs"
fi
afslibdirs="$AFS/lib /usr/afsws/lib /usr/local/afsws/lib \
/opt/afs/lib /usr/local/afs/lib /usr/lib /usr/local/lib \
/usr/athena/lib /usr/local/athena/lib"
afslib=""
afslibdir=""
for i in afs/libkauth afs/libprot afs/libauth afs/libsys afs/libcmd \
afs/libaudit afs/util libubik librx librxkad \
liblwp libafsrpc libdes ; do
check_library "$i" "no" "$afsdir" $afslibdirs
if test "x$found_lib" = "x" ; then
afslib=""
afslibdir=""
enable_afs="no"
break
fi
afslib="$afslib $found_lib"
afslibdir="$afslibdir $found_dir"
done
if test "x$afslib" = "x" ; then
enable_afs="no"
fi
fi
######################################################################
#
### echo %%% krb5 Support - Third party libraries
#
#
# Check for krb5 (libkrb5.a)
#
krb5extracflags=""
havekrb5=""
if test ! "x$enable_krb5" = "xno" ; then
enable_krb5="yes"
if test "x$krb5incdir" = "x" && test ! "x$krb5dir" = "x" ; then
krb5incdir=$krb5dir/include
fi
check_header "krb5.h" "$krb5incdir" /usr/athena/include \
/usr/local/athena/include /usr/kerberos/include \
/usr/krb5/include /usr/local/kerberos/include \
/usr/include /usr/include/kerberosV /usr/local/include
if test "x$found_dir" = "x" ; then
enable_krb5=no
else
krb5inc=$found_hdr
krb5incdir=$found_dir
fi
krb5libdirorg=""
if test ! "x$krb5libdir" = "x" ; then
krb5libdirorg=$krb5libdir
fi
if test "x$krb5libdir" = "x" && test ! "x$krb5dir" = "x" ; then
krb5libdirorg=$krb5dir/lib
fi
krb5libdirs="/usr/athena/lib /usr/local/athena/lib /usr/kerberos/lib \
/usr/krb5/lib /usr/local/kerberos/lib /usr/lib /usr/local/lib"
# check whether using MIT krb5
krb5mit=no
krb5lib=""
krb5libdir=""
check_library libk5crypto "no" "$krb5libdirorg" $krb5libdirs
if test ! "x$found_lib" = "x" ; then
krb5mit=yes
krb5lib=$found_lib
krb5libdir=$found_dir
fi
message "Checking whether we're using MIT Kerberos"
echo "$krb5mit"
check_library libkrb5 "no" "$krb5libdirorg" $krb5libdirs
if test "x$found_lib" = "x" ; then
enable_krb5=no
else
# The order is important here
krb5lib="$found_lib $krb5lib"
krb5libdir="$found_dir $krb5libdir"
if test "x$krb5mit" = "xyes" ; then
# check_library libss "no" "$krb5libdirorg" $krb5libdirs
# if test "x$found_lib" = "x" ; then
# enable_krb5=no
# else
# krb5lib="$krb5lib $found_lib"
# krb5libdir="$krb5libdir $found_dir"
# fi
:
elif test "x$cryptolib" = "x" ; then
check_library "libcrypto" "$enable_shared" "$krb5libdirorg" \
$krb5libdirs
cryptolib=$found_lib
cryptolibdir=$found_dir
if test -r $cryptolib && test "x$enable_shared" = "xno" ; then
case $platform in
linux) cryptolib="$cryptolib -ldl"
esac
fi
if test "x$cryptolib" = "x" ; then
enable_krb5=no
fi
fi
fi
krb5init=""
krb5bindir=""
if test ! "x$krb5dir" = "x" ; then
krb5bindir=$krb5dir/bin
fi
for i in "$krb5bindir" /usr/athena/bin \
/usr/local/athena/bin /usr/kerberos/bin \
/usr/krb5/bin /usr/local/kerberos/bin \
/usr/bin /usr/local/bin ; do
if test -x $i/kinit ; then
krb5init=$i/kinit
break
fi
done
if test "x$krb5init" = "x" ; then
echo "Checking for kinit ... no"
else
echo "Checking for kinit ... $krb5init"
fi
if test ! "x$enable_krb5" = "xyes" ; then
krb5incdir=""
krb5lib=""
krb5libdir=""
else
krb5extracflags="-DR__KRB5"
havekrb5="krb5"
fi
fi
######################################################################
#
### echo %%% Communication of errors library
#
# This library is needed by both AFS and Kerberos support, so to
# avoid duplicate linkage, this is done here.
#
if test "x$enable_afs" = "xyes" || test "x$enable_krb5" = "xyes" ; then
if test ! "x$afsdir" = "x" ; then
comerrlibdir=$afsdir
fi
if test ! "x$krb5libdirorg" = "x" ; then
if test ! "x$comerrlibdir" = "x" ; then
comerrlibdir="$comerrlibdir $krb5libdirorg"
else
comerrlibdir=$krb5libdirorg
fi
fi
check_library libcom_err "$enable_shared" "$comerrlibdir" \
"$afslibdirs $krb5libdirs"
if test "x$found_lib" = "x" ; then
enable_krb5=no
krb5incdir=""
krb5lib=""
krb5libdir=""
krb5extracflags=""
enable_afs=no
afslib=""
comerrlib=""
comerrlibdir=""
else
comerrlib=$found_lib
comerrlibdir=$found_dir
fi
case $platform in
linux|solaris) # Resolver lives in separate library
resolvlib="-lresolv"
;;
esac
fi
######################################################################
#
### echo %%% Shadow password support
#
checking_msg "shadow passwords"
if test "x$enable_shadowpw" = "x"; then
if test -f "/etc/shadow"; then
enable_shadowpw="yes"
else
enable_shadowpw="no"
fi
fi
if test "x$enable_shadowpw" = "xyes"; then
shadowpw="-DR__SHADOWPW "
fi
echo $enable_shadowpw
######################################################################
#
### echo %%% Table Library - Contributed library
#
message "Checking whether to build libTable"
if test "x$enable_table" = "xyes" || test ! "x$TABLE" = "x"; then
enable_table="yes"
echo "yes"
else
enable_table=""
echo "no"
fi
######################################################################
#
### echo %%% Clarens Support - Third party libraries
#
# (See http://clarens.sourceforge.net/)
#
checking_msg "Clarens support"
if test ! "x$enable_clarens" = "xno" ; then
myxmlrpc=`which xmlrpc-c-config 2> /dev/null`
if test ! "x$myxmlrpc" = "x" && test -x "$myxmlrpc" ; then
clarensincdir=`xmlrpc-c-config curl-client --cflags 2> /dev/null`
clarenslibs=`xmlrpc-c-config curl-client --ldadd 2> /dev/null`
if test "x$clarensincdir" = "x" ; then
clarensincdir=`xmlrpc-c-config --cflags 2> /dev/null`
clarenslibs=`xmlrpc-c-config --ldadd 2> /dev/null`
fi
else
clarensincdir=""
clarenslibs=""
fi
if test "x$clarensincdir" = "x" || test "x$clarenslibs" = "x"; then
enable_clarens="no"
fi
fi
if test "x$enable_clarens" = "xyes" ; then
echo "yes"
else
echo "no"
fi
######################################################################
#
### echo %%% PEAC Support - depends on Clarens
#
# (See http://www.clarens.org)
#
checking_msg "PEAC support"
if test ! "x$enable_peac" = "xno" ; then
if test "x$enable_clarens" = "xno"; then
enable_peac="no"
fi
fi
if test "x$enable_peac" = "xyes" ; then
buildpeac="yes"
else
buildpeac="no"
fi
echo "$buildpeac"
######################################################################
#
### echo %%% Debian or Red Hat package list
#
# If we're asked to build for a set of RPMs or Debian packages, we
# make a list of the packages it's possible for us to build on this
# system.
#
if test "x$show_pkglist" = "xyes" ; then
test "x$enable_alien" = "xyes" && pkglist="$pkglist root-plugin-alien"
test "x$enable_asimage" = "xyes" && pkglist="$pkglist root-plugin-asimage"
test "x$enable_cern" = "xyes" && pkglist="$pkglist root-plugin-hbook"
test "x$enable_chirp" = "xyes" && pkglist="$pkglist root-plugin-chirp"
test "x$enable_clarens" = "xyes" && pkglist="$pkglist root-plugin-clarens"
test "x$enable_dcache" = "xyes" && pkglist="$pkglist root-plugin-dcache"
test "x$enable_globus" = "xyes" && pkglist="$pkglist root-plugin-globus"
test "x$enable_krb5" = "xyes" && pkglist="$pkglist root-plugin-krb5"
test "x$enable_ldap" = "xyes" && pkglist="$pkglist root-plugin-ldap"
test "x$enable_mysql" = "xyes" && pkglist="$pkglist root-plugin-mysql"
test "x$enable_opengl" = "xyes" && pkglist="$pkglist root-plugin-gl"
test "x$enable_oracle" = "xyes" && pkglist="$pkglist root-plugin-oracle"
test "x$enable_peac" = "xyes" && pkglist="$pkglist root-plugin-peac"
test "x$enable_pgsql" = "xyes" && pkglist="$pkglist root-plugin-pgsql"
test "x$enable_pythia" = "xyes" && pkglist="$pkglist root-plugin-pythia5"
test "x$enable_pythia6" = "xyes" && pkglist="$pkglist root-plugin-pythia6"
test "x$enable_python" = "xyes" && pkglist="$pkglist root-plugin-python"
test "x$enable_qt" = "xyes" && pkglist="$pkglist root-plugin-qt"
test "x$enable_ruby" = "xyes" && pkglist="$pkglist root-plugin-ruby"
test "x$enable_rfio" = "xyes" && pkglist="$pkglist root-plugin-castor"
test "x$enable_sapdb" = "xyes" && pkglist="$pkglist root-plugin-sapdb"
test "x$enable_srp" = "xyes" && pkglist="$pkglist root-plugin-srp"
test "x$enable_venus" = "xyes" && pkglist="$pkglist root-plugin-venus"
test "x$enable_xml" = "xyes" && pkglist="$pkglist root-plugin-xml"
test "x$enable_xrootd" = "xyes" && pkglist="$pkglist root-xrootd root-plugin-netx"
pkglist="$pkglist root-plugin-fumili root-plugin-minuit root-plugin-mlp root-plugin-proof root-proofd root-plugin-quadp root-rootd root-cint root-doc libroot-dev root-bin libroot ttf-root ttf-root-installer"
# If we're called from the package preparation script, then
# print out the package list and exit
echo "packages: $pkglist"
exit 0
fi
######################################################################
#
### echo %%% check for setresuid and setresgid
#
setresuid="undef"
case $platform in
linux)
message "Checking whether setresuid declared in /usr/include/unistd.h"
if `grep setresuid /usr/include/unistd.h > /dev/null 2>&1` ; then
setresuid="define"
echo "yes"
else
echo "no"
fi ;;
esac
######################################################################
#
### echo %%% Explicitlink - explicitly link with all dependent libraries
#
case $arch in
freebsd*|openbsd|aix*|win32*)
enable_explicitlink="yes"
;;
esac
if test "x$enable_explicitlink" = "xyes" && test ! "$platform" = "win32" ; then
mkliboption=$mkliboption"-x "
fi
######################################################################
#
### echo %%% Exit here if this is a dry run
#
if test "x$noact" = "xyes" ; then
exit 0
fi
######################################################################
#
### echo %%% Create needed directories
#
if test ! -d include ; then
message "Creating include"
mkdir include
echo "done"
fi
if test ! -d bin ; then
message "Creating bin"
mkdir bin
echo "done"
fi
if test ! -d lib ; then
message "Creating lib"
mkdir lib
echo "done"
fi
######################################################################
#
### echo %%% Cleanup obsolete links and files
#
if test -h opengl ; then
rm -f opengl
fi
if test -h ttf ; then
rm -f ttf
fi
if test -f system.rootrc ; then
rm -f system.rootrc
fi
if test -d new ; then
rm -rf new
fi
if test -d star ; then
rm -rf star
fi
rm -f lib/libRXML* bin/libRXML*
######################################################################
#
### echo %%% Fleshin out paths
#
# First win32 does not support -L in ldflags, so remove @ldflags@.
#
if test "$platform" = "win32" ; then
sed -e "s|@ldflags@||" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
fi
if test ! "x$haveconfig" = "x" ; then
##################################################################
#
### echo %%% Static directory build.
#
if test "x$prefix" = "x"; then prefix=/usr/local; fi
if test "x$bindir" = "x"; then bindir=$prefix/bin; fi
if test "x$libdir" = "x"; then libdir=$prefix/lib/root; fi
if test "x$incdir" = "x"; then incdir=$prefix/include/root; fi
if test "x$etcdir" = "x"; then etcdir=/etc/root; fi
if test "x$mandir" = "x"; then mandir=$prefix/share/man/man1; fi
if test "x$datadir" = "x"; then datadir=$prefix/share/root; fi
if test "x$proofdir" = "x"; then proofdir=$datadir/proof; fi
if test "x$macrodir" = "x"; then macrodir=$datadir/macros; fi
if test "x$cintincdir" = "x"; then cintincdir=$libdir/cint; fi
if test "x$iconpath" = "x"; then iconpath=$datadir/icons; fi
if test "x$srcdir" = "x"; then srcdir=$datadir/src; fi
if test "x$fontdir" = "x"; then fontdir=$datadir/fonts; fi
if test "x$docdir" = "x"; then docdir=$prefix/share/doc/root; fi
if test "x$testdir" = "x"; then testdir=$docdir/test; fi
if test "x$tutdir" = "x"; then tutdir=$docdir/tutorials; fi
if test "x$aclocaldir" = "x"; then aclocaldir=$prefix/share/aclocal; fi
if test "x$elispdir" = "x"; then elispdir=$prefix/share/emacs/site-lisp; fi
if test "x$enable_rpath" = "xyes" ; then
if test "$arch" = "solarisCC5"; then
sed -e "s|@ldflags@|-R$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
else
if test "x$enable_globus" = "xyes" ; then
sed -e "s|@ldflags@|-Wl,-rpath,$libdir -Wl,-rpath,$GLOBUS_LOCATION/lib @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
else
sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
fi
fi
mv Makefile.tmpp Makefile.tmp
fi
sed -e "s|@useconfig@|TRUE|" \
-e "s|@cflags@|-DHAVE_CONFIG|" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
else
##################################################################
#
### echo %%% Environment driven build. Escape sequences very important
#
prefix=\$\(ROOTSYS\)
bindir=\$\(ROOTSYS\)/bin
libdir=\$\(ROOTSYS\)/lib
incdir=\$\(ROOTSYS\)/include
etcdir=\$\(ROOTSYS\)/etc
datadir=\$\(ROOTSYS\)
mandir=\$\(ROOTSYS\)/man/man1
proofdir=\$\(ROOTSYS\)/proof
macrodir=\$\(ROOTSYS\)/macros
cintincdir=\$\(ROOTSYS\)/cint
iconpath=\$\(ROOTSYS\)/icons
srcdir=\$\(ROOTSYS\)/src
fontdir=\$\(ROOTSYS\)/fonts
docdir=\$\(ROOTSYS\)
testdir=\$\(ROOTSYS\)/test
tutdir=\$\(ROOTSYS\)/tutorials
aclocaldir=\$\(ROOTSYS\)/build/misc
elispdir=\$\(ROOTSYS\)/build/misc
# when using rpath in this case build product is not relocatable
if test "x$enable_rpath" = "xyes" ; then
if test "$arch" = "solarisCC5"; then
sed -e "s|@ldflags@|-R$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
else
sed -e "s|@ldflags@|-Wl,-rpath,$libdir @ldflags@|" \
< Makefile.tmp > Makefile.tmpp
fi
mv Makefile.tmpp Makefile.tmp
fi
sed -e "s|@useconfig@|FALSE|" \
-e "s|@cflags@||" \
-e "s|@ldflags@||" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
fi
######################################################################
#
### echo %%% Writing files
#
#---------------------------------------------------------------------
# config/Makefile.config
#
message "Writing $MAKEOUT"
sed -e "s|@aclocaldir@|$aclocaldir|" \
-e "s|@afslib@|$afslib|" \
-e "s|@afslibdir@|$afslibdir|" \
-e "s|@alienincdir@|$alienincdir|" \
-e "s|@alienlib@|$alienlib|" \
-e "s|@alienlibdir@|$alienlibdir|" \
-e "s|@architecture@|$arch|" \
-e "s|@asextralib@|$asextralib|" \
-e "s|@asextralibdir@|$asextralibdir|" \
-e "s|@asjpegincdir@|$asjpegincdir|" \
-e "s|@aspngincdir@|$aspngincdir|" \
-e "s|@astiffincdir@|$astiffincdir|" \
-e "s|@asgifincdir@|$asgifincdir|" \
-e "s|@asimageincdir@|$asimageincdir|" \
-e "s|@asimagelib@|$asimagelib|" \
-e "s|@asimagelibdir@|$asimagelibdir|" \
-e "s|@bindir@|$bindir|" \
-e "s|@buildasimage@|$enable_asimage|" \
-e "s|@builtinafterimage@|$enable_builtin_afterimage|" \
-e "s|@builtinfreetype@|$enable_builtin_freetype|" \
-e "s|@buildpeac@|$buildpeac|" \
-e "s|@buildxrd@|$buildxrd|" \
-e "s|@cernlibdir@|$cernlibdir|" \
-e "s|@cernlibs@|$cernlib|" \
-e "s|@chirpincdir@|$chirpincdir|" \
-e "s|@chirplib@|$chirplib|" \
-e "s|@chirplibdir@|$chirplibdir|" \
-e "s|@clarensincdir@|$clarensincdir|" \
-e "s|@clarenslibs@|$clarenslibs|" \
-e "s|@cintincdir@|$cintincdir|" \
-e "s|@datadir@|$datadir|" \
-e "s|@dcapincdir@|$dcapincdir|" \
-e "s|@comerrlib@|$comerrlib|" \
-e "s|@comerrlibdir@|$comerrlibdir|" \
-e "s|@cryptolib@|$cryptolib|" \
-e "s|@cryptolibdir@|$cryptolibdir|" \
-e "s|@dcaplib@|$dcaplib|" \
-e "s|@dcaplibdir@|$dcaplibdir|" \
-e "s|@docdir@|$docdir|" \
-e "s|@elispdir@|$elispdir|" \
-e "s|@buildtable@|$enable_table|" \
-e "s|@enable_thread@|$enable_thread|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@exceptions@|$enable_exceptions|" \
-e "s|@explicitlink@|$enable_explicitlink|" \
-e "s|@globusincdir@|$globusincdir|" \
-e "s|@globuslib@|$globuslib|" \
-e "s|@globuslibdir@|$globuslibdir|" \
-e "s|@glbextracflags@|$glbextracflags|" \
-e "s|@glbpatchcflags@|$glbpatchcflags|" \
-e "s|@iconpath@|$iconpath|" \
-e "s|@incdir@|$incdir|" \
-e "s|@krb5incdir@|$krb5incdir|" \
-e "s|@krb5lib@|$krb5lib|" \
-e "s|@krb5libdir@|$krb5libdir|" \
-e "s|@krb5extracflags@|$krb5extracflags|" \
-e "s|@ldapincdir@|$ldapincdir|" \
-e "s|@ldaplib@|$ldaplib|" \
-e "s|@ldaplibdir@|$ldaplibdir|" \
< Makefile.tmp > Makefile.tmpp
mv Makefile.tmpp Makefile.tmp
sed -e "s|@ldflags@||" \
-e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@mandir@|$mandir|" \
-e "s|@mkliboption@|$mkliboption|" \
-e "s|@mysqlincdir@|$mysqlincdir|" \
-e "s|@mysqllib@|$mysqllib|" \
-e "s|@mysqllibdir@|$mysqllibdir|" \
-e "s|@openglincdir@|$openglincdir|" \
-e "s|@opengllib@|$opengllib|" \
-e "s|@opengllibdir@|$opengllibdir|" \
-e "s|@openglulib@|$openglulib|" \
-e "s|@oracleincdir@|$oracleincdir|" \
-e "s|@oraclelib@|$oraclelib|" \
-e "s|@oraclelibdir@|$oraclelibdir|" \
-e "s|@pgsqlincdir@|$pgsqlincdir|" \
-e "s|@pgsqllib@|$pgsqllib|" \
-e "s|@pgsqllibdir@|$pgsqllibdir|" \
-e "s|@proofdir@|$proofdir|" \
-e "s|@pythia6lib@|$pythia6lib|" \
-e "s|@pythia6libdir@|$pythia6libdir|" \
-e "s|@pythialib@|$pythialib|" \
-e "s|@pythialibdir@|$pythialibdir|" \
-e "s|@pythonlib@|$pythonlib|" \
-e "s|@pythonlibdir@|$pythonlibdir|" \
-e "s|@pythonincdir@|$pythonincdir|" \
-e "s|@pythonlibflags@|$pythonlibflags|" \
-e "s|@rubylib@|$rubylib|" \
-e "s|@rubylibdir@|$rubylibdir|" \
-e "s|@rubyincdir@|$rubyincdir|" \
-e "s|@qtincdir@|$qtincdir|" \
-e "s|@qtlib@|$qtlib|" \
-e "s|@qtlibdir@|$qtlibdir|" \
-e "s|@qtmocexe@|$qtmocexe|" \
-e "s|@resolvlib@|$resolvlib|" \
-e "s|@rootbuild@|$rootbuild|" \
-e "s|@sapdbincdir@|$sapdbincdir|" \
-e "s|@sapdblib@|$sapdblib|" \
-e "s|@sapdblibdir@|$sapdblibdir|" \
-e "s|@shadowpw@|$shadowpw|" \
-e "s|@shiftincdir@|$shiftincdir|" \
-e "s|@shiftlib@|$shiftlib|" \
-e "s|@shiftlibdir@|$shiftlibdir|" \
-e "s|@srcdir@|$srcdir|" \
-e "s|@srpincdir@|$srpincdir|" \
-e "s|@srplib@|$srplib|" \
-e "s|@srplibdir@|$srplibdir|" \
-e "s|@srputilincdir@|$srputilincdir|" \
-e "s|@srputillib@|$srputillib|" \
-e "s|@srputillibdir@|$srputillibdir|" \
-e "s|@srpextracflags@|$srpextracflags|" \
-e "s|@sslincdir@|$sslincdir|" \
-e "s|@ssllib@|$ssllib|" \
-e "s|@ssllibdir@|$ssllibdir|" \
-e "s|@sslextracflags@|$sslextracflags|" \
-e "s|@testdir@|$testdir|" \
-e "s|@threadflag@|$threadflag|" \
-e "s|@threadlib@|$threadlib|" \
-e "s|@threadlibdir@|$threadlibdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@tutdir@|$tutdir|" \
-e "s|@venuslib@|$venuslib|" \
-e "s|@venuslibdir@|$venuslibdir|" \
-e "s|@xmlincdir@|$xmlincdir|" \
-e "s|@xmllib@|$xmllib|" \
-e "s|@xmllibdir@|$xmllibdir|" \
-e "s|@x11libdir@|$x11libdir|" \
-e "s|@xpmlib@|$xpmlib|" \
-e "s|@xpmlibdir@|$xpmlibdir|" \
-e "s|@buildgl@|$enable_opengl|" \
-e "s|@buildhbook@|$enable_cern|" \
-e "s|@buildldap@|$enable_ldap|" \
-e "s|@buildmysql@|$enable_mysql|" \
-e "s|@buildpgsql@|$enable_pgsql|" \
-e "s|@buildoracle@|$enable_oracle|" \
-e "s|@buildsapdb@|$enable_sapdb|" \
-e "s|@buildqt@|$enable_qt|" \
-e "s|@buildshift@|$enable_rfio|" \
-e "s|@builddcap@|$enable_dcache|" \
-e "s|@buildchirp@|$enable_chirp|" \
-e "s|@buildalien@|$enable_alien|" \
-e "s|@buildasimage@|$enable_asimage|" \
-e "s|@buildpythia@|$enable_pythia|" \
-e "s|@buildpythia6@|$enable_pythia6|" \
-e "s|@buildvenus@|$enable_venus|" \
-e "s|@buildpython@|$enable_python|" \
-e "s|@buildruby@|$enable_ruby|" \
-e "s|@buildxml@|$enable_xml|" \
-e "s|@buildxrd@|$enable_xrd|" \
-e "s|@buildsrputil@|$enable_srputil|" \
-e "s|@buildkrb5@|$enable_krb5|" \
-e "s|@buildglobus@|$enable_globus|" \
-e "s|@buildclarens@|$enable_clarens|" \
-e "s|@buildpeac@|$enable_peac|" \
< Makefile.tmp > $MAKEOUT
rm -f Makefile.tmp
if test "x$platform" = "xwin32"; then
sed -e 's@$(ROOTSYS)\(.*\)@$(shell cygpath -u \"$(ROOTSYS)\1")@' \
< $MAKEOUT > Makefile.tmp
mv -f Makefile.tmp $MAKEOUT
fi
echo "done"
#---------------------------------------------------------------------
# include/config.h
#
message "Writing $CONFOUT"
sed \
-e "s|@architecture@|$arch|" \
-e "s|@bindir@|$bindir|" \
-e "s|@cintincdir@|$cintincdir|" \
-e "s|@datadir@|$datadir|" \
-e "s|@docdir@|$docdir|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@extraiconpath@|$extraiconpath|" \
-e "s|@iconpath@|$iconpath|" \
-e "s|@incdir@|$incdir|" \
-e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@prefix@|$prefix|" \
-e "s|@srcdir@|$srcdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@setresuid@|$setresuid|" \
-e "s|@krb5init@|$krb5init|" \
-e "s|@configoptions@|$configoptions|" \
< config.tmp > $CONFOUT
rm -f config.tmp
echo "done"
#---------------------------------------------------------------------
# bin/root-config
#
message "Writing $RCONFOUT"
prefix2=$prefix
bindir2=$bindir
libdir2=$libdir
incdir2=$incdir
if test "$prefix2" = "\$(ROOTSYS)" ; then
prefix2=\$ROOTSYS
bindir2=\$ROOTSYS/bin
libdir2=\$ROOTSYS/lib
incdir2=\$ROOTSYS/include
fi
features=""
for f in $options ; do
bar="$`echo $f`"
if test "x`eval echo $bar`" = "xyes" ; then
feat=`echo $f | sed 's/enable_//'`
features="$features $feat"
fi
done
sed -e "s|@architecture@|$arch|" \
-e "s|@platform@|$platform|" \
-e "s|@prefix@|$prefix2|" \
-e "s|@bindir@|$bindir2|" \
-e "s|@libdir@|$libdir2|" \
-e "s|@incdir@|$incdir2|" \
-e "s|@features@|$features|" \
< root-config.tmp > $RCONFOUT
rm -f root-config.tmp
chmod 755 $RCONFOUT
echo "done"
#---------------------------------------------------------------------
# etc/system.rootrc
#
message "Writing $ROOTRCOUT"
sed -e "s|@libdir@|$libdir|" \
-e "s|@macrodir@|$macrodir|" \
-e "s|@bindir@|$bindir|" \
-e "s|@etcdir@|$etcdir|" \
-e "s|@ttffontdir@|$fontdir|" \
-e "s|@iconpath@|$iconpath|" \
-e "s|@hasnetx@|$hasnetx|" \
< rootrc.tmp > $ROOTRCOUT
rm -f rootrc.tmp
echo "done"
#---------------------------------------------------------------------
# etc/system.rootauthrc
#
message "Writing $ROOTAUTHRCOUT"
sed -e "s|@havesrp@|$havesrp|" \
-e "s|@havekrb5@|$havekrb5|" \
-e "s|@haveglobus@|$haveglobus|" \
< rootauthrc.tmp > $ROOTAUTHRCOUT
rm -f rootauthrc.tmp
echo "done"
#---------------------------------------------------------------------
# etc/system.rootdaemonrc
#
message "Writing $ROOTDAEMONRCOUT"
sed -e "s|@havesrp@|$havesrp|" \
-e "s|@havekrb5@|$havekrb5|" \
-e "s|@haveglobus@|$haveglobus|" \
< rootdaemonrc.tmp > $ROOTDAEMONRCOUT
rm -f rootdaemonrc.tmp
echo "done"
#---------------------------------------------------------------------
# etc/root.mimes
#
message "Writing $MIMEOUT"
if test "$platform" = "win32" ; then
cp -f $MIMEWIN32IN $MIMEOUT
else
cp -f $MIMEUNIXIN $MIMEOUT
fi
echo "done"
#---------------------------------------------------------------------
# etc/rootd
#
if test ! "x$haveconfig" = "x" ; then
message "Writing $ROOTDOUT"
sed \
-e "s|@bindir@|$bindir|" \
< rootd.tmp > $ROOTDOUT
rm -f rootd.tmp
echo "done"
fi
#---------------------------------------------------------------------
# bin/memprobe
#
message "Writing $MEMPROBEOUT"
if test -x /usr/bin/env ; then
perlexe="/usr/bin/env perl"
else
perlexe=`which perl`
fi
sed -e "s|@perl@|$perlexe|" \
< memprobe.tmp > $MEMPROBEOUT
rm -f memprobe.tmp
chmod 755 $MEMPROBEOUT
echo "done"
#---------------------------------------------------------------------
# build/misc/root-help.el
#
message "Writing $ROOTHELPOUT"
sed -e "s|@bindir@|$bindir|" \
-e "s|@incdir@|$incdir|" \
< $ROOTHELPIN > $ROOTHELPOUT
echo "done"
#---------------------------------------------------------------------
# macros/html.C
#
message "Writing $HTMLOUT"
sed_args=
for opt in $options; do
sed_args="${sed_args} -e s/@$opt@/"
if eval "test x$`eval echo $opt` = xyes"; then
sed_args="${sed_args}kTRUE"
else
sed_args="${sed_args}kFALSE"
fi
sed_args="${sed_args}/g"
done
sed $sed_args < $HTMLIN > $HTMLOUT
echo done
#---------------------------------------------------------------------
# config.status
#
message "Writing config.status"
echo $configargs > config.status
echo done
#---------------------------------------------------------------------
# for reconfigure
#
touch Makefile
######################################################################
#
# FAT conversion in test/tutorials
#
# On win32 convert all files in tutorials and test to \r\n convention
# (only if CVS directory does not exist, otherwise cvs will already
# have made the conversion).
#
if test "x$platform" = "xwin32" && test ! -d CVS ; then
message "Converting files in tutorials and test to DOS format"
for i in tutorials/*.C tutorials/*.sql test/*.cxx test/*.h \
test/Makefile* test/README etc/system.rootrc
do
sed 's/$//' $i > r__tmp
touch -r $i r__tmp
mv -f r__tmp $i
done
echo "done"
fi
######################################################################
#
# Show successful configure options
#
enabled_options=""
for opt in $options; do
if eval "test x$`eval echo $opt` = xyes"; then
thisopt=`echo $opt | sed 's,^enable_,,'`
if test "x$enabled_options" = "x"; then
enabled_options="$thisopt"
else
enabled_options="$enabled_options, $thisopt"
fi
fi
done
if test "x$enabled_options" != "x"; then
echo ""
echo "Enabled support for ${enabled_options}."
fi
######################################################################
#
# Warning about recommended build options
#
echo ""
if test "x$enable_opengl" = "xno" ; then
echo "To build the ROOT OpenGL add-on library see README/INSTALL."
echo ""
echo ""
fi
######################################################################
#
### echo %%% Final instructions
#
# List the possible Makefiles
#
if test "x$nohowto" = "xyes" ; then
exit 0
fi
echo "To build ROOT type:"
echo ""
echo " $gnumake"
if test ! "x$haveconfig" = "x" ; then
echo " $gnumake install"
fi
echo ""
exit 0