Skip to main content

Browse the archive

https://github.com/raspberrypi/linux
02 August 2024, 14:19:03 UTC
sort by:
Revision Author Date Message Commit Date
7688b39 Phil Elwell 28 May 2019, 15:36:04 UTC Backport BCM270X_DT: Rename Pi Zero W DT files This patch needed to be backported to series 4.14.y because it is also supported in meta-raspberrypi for Yocto Project. Unfortunately, the rename affected the correct building of the 4.14 series kernel, which now results broken. Applying the same renames on the 4.14.y series would fix the issue for those still using that kernel version. The downtream Pi Zero W dts file uses the digit 0, whereas upstream chose to spell it out - "zero-w". The firmware has, for a long time, looked for bcm2708-rpi-zero-w.dtb first before falling back to the numerical version. Therefore it is better to follow upstream and make the switch to "bcm2708-rpi-zero-w". At the same time, remove some overrides that duplicate values inherited from the shared .dtsi files. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com> 30 July 2019, 13:37:58 UTC
caa6533 Paul Barker 29 April 2019, 08:56:50 UTC bcm2835-mmc: Follow renaming of SDHCI_ACMD12_ERR Backport commit 45fd8679ea86bffb352132a1df4917c3d11375aa, introduced in v4.14.114, renamed 'SDHCI_ACMD12_ERR' to 'SDHCI_AUTO_CMD_STATUS'. Signed-off-by: Paul Barker <paul@betafive.co.uk> 29 April 2019, 08:57:50 UTC
7e8b161 Paul Barker 29 April 2019, 08:44:44 UTC Merge tag 'v4.14.114' into rpi-4.14.y This is the 4.14.114 stable release 29 April 2019, 08:44:44 UTC
fa5941f Greg Kroah-Hartman 27 April 2019, 07:35:42 UTC Linux 4.14.114 27 April 2019, 07:35:42 UTC
62c1af5 Will Deacon 06 April 2019, 01:39:38 UTC kernel/sysctl.c: fix out-of-bounds access when setting file-max commit 9002b21465fa4d829edfc94a5a441005cffaa972 upstream. Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max") Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Christian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:42 UTC
599c8a4 Greg Kroah-Hartman 25 April 2019, 08:00:43 UTC Revert "locking/lockdep: Add debug_locks check in __lock_downgrade()" This reverts commit 4a195a0bc2e954b91085d5c82eb20c51835ee7b0 which was commit 71492580571467fb7177aade19c18ce7486267f5 upstream. Tetsuo rightly points out that the backport here is incorrect, as it touches the __lock_set_class function instead of the intended __lock_downgrade function. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:42 UTC
d6b1140 Linus Torvalds 27 October 2018, 16:10:48 UTC i2c-hid: properly terminate i2c_hid_dmi_desc_override_table[] array commit b59dfdaef173677b0b7e10f375226c0a1114fd20 upstream. Commit 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices") added a new dmi_system_id quirk table to override certain HID report descriptors for some systems that lack them. But the table wasn't properly terminated, causing the dmi matching to walk off into la-la-land, and starting to treat random data as dmi descriptor pointers, causing boot-time oopses if you were at all unlucky. Terminate the array. We really should have some way to just statically check that arrays that should be terminated by an empty entry actually are so. But the HID people really should have caught this themselves, rather than have me deal with an oops during the merge window. Tssk, tssk. Cc: Julian Sax <jsbc@gmx.de> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ambrož Bizjak <abizjak.pro@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
4024e3b Darrick J. Wong 08 December 2017, 03:07:02 UTC xfs: hold xfs_buf locked between shortform->leaf conversion and the addition of an attribute commit 6e643cd094de3bd0f97edcc1db0089afa24d909f upstream. The new attribute leaf buffer is not held locked across the transaction roll between the shortform->leaf modification and the addition of the new entry. As a result, the attribute buffer modification being made is not atomic from an operational perspective. Hence the AIL push can grab it in the transient state of "just created" after the initial transaction is rolled, because the buffer has been released. This leads to xfs_attr3_leaf_verify() asserting that hdr.count is zero, treating this as in-memory corruption, and shutting down the filesystem. Darrick ported the original patch to 4.15 and reworked it use the xfs_defer_bjoin helper and hold/join the buffer correctly across the second transaction roll. Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
2411a27 Darrick J. Wong 08 December 2017, 03:07:02 UTC xfs: add the ability to join a held buffer to a defer_ops commit b7b2846fe26f2c0d7f317c874a13d3ecf22670ff upstream. In certain cases, defer_ops callers will lock a buffer and want to hold the lock across transaction rolls. Similar to ijoined inodes, we want to dirty & join the buffer with each transaction roll in defer_finish so that afterwards the caller still owns the buffer lock and we haven't inadvertently pinned the log. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
4fa17fc Darrick J. Wong 08 January 2018, 18:41:39 UTC iomap: report collisions between directio and buffered writes to userspace commit 5a9d929d6e13278df62bd9e3d3ceae8c87ad1eea upstream. If two programs simultaneously try to write to the same part of a file via direct IO and buffered IO, there's a chance that the post-diowrite pagecache invalidation will fail on the dirty page. When this happens, the dio write succeeded, which means that the page cache is no longer coherent with the disk! Programs are not supposed to mix IO types and this is a clear case of data corruption, so store an EIO which will be reflected to userspace during the next fsync. Replace the WARN_ON with a ratelimited pr_crit so that the developers have /some/ kind of breadcrumb to track down the offending program(s) and file(s) involved. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zubin Mithra <zsm@chromium.org> 27 April 2019, 07:35:41 UTC
c5e4454 Arnaldo Carvalho de Melo 25 September 2018, 13:55:59 UTC tools include: Adopt linux/bits.h commit ba4aa02b417f08a0bee5e7b8ed70cac788a7c854 upstream. So that we reduce the difference of tools/include/linux/bitops.h to the original kernel file, include/linux/bitops.h, trying to remove the need to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h. And the things removed from tools/include/linux/bitops.h are really in linux/bits.h, so that we can have a copy and then tools/perf/check_headers.sh will tell us when new stuff gets added to linux/bits.h so that we can check if it is useful and if any adjustment needs to be done to the tools/{include,arch}/ copies. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
47ad82a Matteo Croce 18 March 2019, 01:32:36 UTC percpu: stop printing kernel addresses commit 00206a69ee32f03e6f40837684dcbe475ea02266 upstream. Since commit ad67b74d2469d9b8 ("printk: hash addresses printed with %p"), at boot "____ptrval____" is printed instead of actual addresses: percpu: Embedded 38 pages/cpu @(____ptrval____) s124376 r0 d31272 u524288 Instead of changing the print to "%px", and leaking kernel addresses, just remove the print completely, cfr. e.g. commit 071929dbdd865f77 ("arm64: Stop printing the virtual memory layout"). Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
216f657 Takashi Iwai 16 April 2019, 13:25:00 UTC ALSA: info: Fix racy addition/deletion of nodes commit 8c2f870890fd28e023b0fcf49dcee333f2c8bad7 upstream. The ALSA proc helper manages the child nodes in a linked list, but its addition and deletion is done without any lock. This leads to a corruption if they are operated concurrently. Usually this isn't a problem because the proc entries are added sequentially in the driver probe procedure itself. But the card registrations are done often asynchronously, and the crash could be actually reproduced with syzkaller. This patch papers over it by protecting the link addition and deletion with the parent's mutex. There is "access" mutex that is used for the file access, and this can be reused for this purpose as well. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
98ae856 Konstantin Khlebnikov 19 April 2019, 00:50:20 UTC mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n commit e8277b3b52240ec1caad8e6df278863e4bf42eac upstream. Commit 58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") depends on skipping vmstat entries with empty name introduced in 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") but reverted in b29940c1abd7 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). So skipping no longer works and /proc/vmstat has misformatted lines " 0". This patch simply shows debug counters "nr_tlb_remote_*" for UP. Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz Fixes: 58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:41 UTC
80ef021 Jann Horn 19 March 2019, 01:36:59 UTC device_cgroup: fix RCU imbalance in error case commit 0fcc4c8c044e117ac126ab6df4138ea9a67fa2a9 upstream. When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56618f ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:40 UTC
d069fe4 Phil Auld 23 April 2019, 23:51:06 UTC sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup [ Upstream commit 2e8e19226398db8265a8e675fcc0118b9e80c9e8 ] With extremely short cfs_period_us setting on a parent task group with a large number of children the for loop in sched_cfs_period_timer() can run until the watchdog fires. There is no guarantee that the call to hrtimer_forward_now() will ever return 0. The large number of children can make do_sched_cfs_period_timer() take longer than the period. NMI watchdog: Watchdog detected hard LOCKUP on cpu 24 RIP: 0010:tg_nop+0x0/0x10 <IRQ> walk_tg_tree_from+0x29/0xb0 unthrottle_cfs_rq+0xe0/0x1a0 distribute_cfs_runtime+0xd3/0xf0 sched_cfs_period_timer+0xcb/0x160 ? sched_cfs_slack_timer+0xd0/0xd0 __hrtimer_run_queues+0xfb/0x270 hrtimer_interrupt+0x122/0x270 smp_apic_timer_interrupt+0x6a/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> To prevent this we add protection to the loop that detects when the loop has run too many times and scales the period and quota up, proportionally, so that the timer can complete before then next period expires. This preserves the relative runtime quota while preventing the hard lockup. A warning is issued reporting this state and the new values. Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190319130005.25492-1-pauld@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
56714d4 Matthias Kaehlcke 23 April 2019, 19:04:22 UTC Revert "kbuild: use -Oz instead of -Os when using clang" commit a75bb4eb9e565b9f5115e2e8c07377ce32cbe69a upstream. The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c299de1ffbe56733647b01dbcc398c419. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
74cec25 Peter Oskolkov 23 April 2019, 17:48:25 UTC net: IP6 defrag: use rbtrees in nf_conntrack_reasm.c [ Upstream commit 997dd96471641e147cb2c33ad54284000d0f5e35 ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
6925083 Peter Oskolkov 23 April 2019, 17:48:24 UTC net: IP6 defrag: use rbtrees for IPv6 defrag [ Upstream commit d4289fcc9b16b89619ee1c54f829e05e56de8b9a ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. v2: change handling of overlaps to match that of upstream. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
5d827bf Florian Westphal 23 April 2019, 17:48:23 UTC ipv6: remove dependency of nf_defrag_ipv6 on ipv6 module [ Upstream commit 70b095c84326640eeacfd69a411db8fc36e8ab1a ] IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
ccfa73d Peter Oskolkov 23 April 2019, 17:48:22 UTC net: IP defrag: encapsulate rbtree defrag code into callable functions [ Upstream commit c23f35d19db3b36ffb9e04b08f1d91565d15f84f ] This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. v2: make handling of overlapping packets match upstream. Signed-off-by: Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
a885a0f Eric Dumazet 23 April 2019, 17:48:21 UTC ipv6: frags: fix a lockdep false positive [ Upstream commit 415787d7799f4fccbe8d49cb0b8e5811be6b0389 ] lockdep does not know that the locks used by IPv4 defrag and IPv6 reassembly units are of different classes. It complains because of following chains : 1) sch_direct_xmit() (lock txq->_xmit_lock) dev_hard_start_xmit() xmit_one() dev_queue_xmit_nit() packet_rcv_fanout() ip_check_defrag() ip_defrag() spin_lock() (lock frag queue spinlock) 2) ip6_input_finish() ipv6_frag_rcv() (lock frag queue spinlock) ip6_frag_queue() icmpv6_param_prob() (lock txq->_xmit_lock at some point) We could add lockdep annotations, but we also can make sure IPv6 calls icmpv6_param_prob() only after the release of the frag queue spinlock, since this naturally makes frag queue spinlock a leaf in lock hierarchy. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
00a2223 Jarkko Sakkinen 08 February 2019, 16:30:59 UTC tpm/tpm_i2c_atmel: Return -E2BIG when the transfer is incomplete [ Upstream commit 442601e87a4769a8daba4976ec3afa5222ca211d ] Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour. Cc: stable@vger.kernel.org Fixes: a2871c62e186 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:40 UTC
10bd1c7 Masahiro Yamada 22 November 2018, 04:28:42 UTC modpost: file2alias: check prototype of handler commit f880eea68fe593342fa6e09be9bb661f3c297aec upstream. Use specific prototype instead of an opaque pointer so that the compiler can catch function prototype mismatch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
1a7fe5c Masahiro Yamada 22 November 2018, 04:28:41 UTC modpost: file2alias: go back to simple devtable lookup commit ec91e78d378cc5d4b43805a1227d8e04e5dfa17d upstream. Commit e49ce14150c6 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3acaecd7 ("mod/file2alias: make modpost compile on darwin again") came in. Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Mathieu Malaterre <malat@debian.org> [nc: Omit rpmsg, sdw, tbsvc, and typec as they do not exist here] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
c728ffc Adrian Hunter 15 November 2018, 13:53:43 UTC mmc: sdhci: Handle auto-command errors [ Upstream commit af849c86109d79222e549826068bbf4e7f9a2472 ] If the host controller supports auto-commands then enable the auto-command error interrupt and handle it. In the case of auto-CMD23, the error is treated the same as manual CMD23 error. In the case of auto-CMD12, commands-during-transfer are not permitted, so the error handling is treated the same as a data error. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
45fd867 Adrian Hunter 15 November 2018, 13:53:42 UTC mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERR [ Upstream commit 869f8a69bb3a4aec4eb914a330d4ba53a9eed495 ] The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12 errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
f83cf25 Adrian Hunter 15 November 2018, 13:53:41 UTC mmc: sdhci: Fix data command CRC error handling [ Upstream commit 4bf780996669280171c9cd58196512849b93434e ] Existing data command CRC error handling is non-standard and does not work with some Intel host controllers. Specifically, the assumption that the host controller will continue operating normally after the error interrupt, is not valid. Change the driver to handle the error in the same manner as a data CRC error, taking care to ensure that the data line reset is done for single or multi-block transfers, and it is done before unmapping DMA. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
4cec35e Christian Lamparter 19 April 2018, 16:41:55 UTC crypto: crypto4xx - properly set IV after de- and encrypt [ Upstream commit fc340115ffb8235c1bbd200c28855e6373d0dd1a ] This patch fixes cts(cbc(aes)) test when cbc-aes-ppc4xx is used. alg: skcipher: Test 1 failed (invalid result) on encryption for cts(cbc-aes-ppc4xx) 00000000: 4b 10 75 fc 2f 14 1b 6a 27 35 37 33 d1 b7 70 05 00000010: 97 alg: skcipher: Failed to load transform for cts(cbc(aes)): -2 The CTS cipher mode expect the IV (req->iv) of skcipher_request to contain the last ciphertext block after the {en,de}crypt operation is complete. Fix this issue for the AMCC Crypto4xx hardware engine. The tcrypt test case for cts(cbc(aes)) is now correctly passed. name : cts(cbc(aes)) driver : cts(cbc-aes-ppc4xx) module : cts priority : 300 refcnt : 1 selftest : passed internal : no type : skcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 chunksize : 16 walksize : 16 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 27 April 2019, 07:35:39 UTC
3b921dc Thomas Gleixner 14 April 2019, 17:51:06 UTC x86/speculation: Prevent deadlock on ssb_state::lock commit 2f5fb19341883bb6e37da351bc3700489d8506a7 upstream. Mikhail reported a lockdep splat related to the AMD specific ssb_state lock: CPU0 CPU1 lock(&st->lock); local_irq_disable(); lock(&(&sighand->siglock)->rlock); lock(&st->lock); <Interrupt> lock(&(&sighand->siglock)->rlock); *** DEADLOCK *** The connection between sighand->siglock and st->lock comes through seccomp, which takes st->lock while holding sighand->siglock. Make sure interrupts are disabled when __speculation_ctrl_update() is invoked via prctl() -> speculation_ctrl_update(). Add a lockdep assert to catch future offenders. Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1904141948200.4917@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:39 UTC
55e7e51 Kan Liang 02 April 2019, 19:44:58 UTC perf/x86: Fix incorrect PEBS_REGS commit 9d5dcc93a6ddfc78124f006ccd3637ce070ef2fc upstream. PEBS_REGS used as mask for the supported registers for large PEBS. However, the mask cannot filter the sample_regs_user/sample_regs_intr correctly. (1ULL << PERF_REG_X86_*) should be used to replace PERF_REG_X86_*, which is only the index. Rename PEBS_REGS to PEBS_GP_REGS, because the mask is only for general purpose registers. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Fixes: 2fe1bc1f501d ("perf/x86: Enable free running PEBS for REGS_USER/INTR") Link: https://lkml.kernel.org/r/20190402194509.2832-2-kan.liang@linux.intel.com [ Renamed it to PEBS_GP_REGS - as 'GPRS' is used elsewhere ;-) ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:39 UTC
607d291 Andi Kleen 30 March 2019, 00:47:43 UTC x86/cpu/bugs: Use __initconst for 'const' init data commit 1de7edbb59c8f1b46071f66c5c97b8a59569eb51 upstream. Some of the recently added const tables use __initdata which causes section attribute conflicts. Use __initconst instead. Fixes: fa1202ef2243 ("x86/speculation: Add command line control") Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
5980955 Kim Phillips 21 March 2019, 21:15:22 UTC perf/x86/amd: Add event map for AMD Family 17h commit 3fe3331bb285700ab2253dbb07f8e478fcea2f1b upstream. Family 17h differs from prior families by: - Does not support an L2 cache miss event - It has re-enumerated PMC counters for: - L2 cache references - front & back end stalled cycles So we add a new amd_f17h_perfmon_event_map[] so that the generic perf event names will resolve to the correct h/w events on family 17h and above processors. Reference sections 2.1.13.3.3 (stalls) and 2.1.13.3.6 (L2): https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors") [ Improved the formatting a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
5efba8d Felix Fietkau 01 March 2019, 13:48:37 UTC mac80211: do not call driver wake_tx_queue op during reconfig commit 4856bfd230985e43e84c26473c91028ff0a533bd upstream. There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
8a80544 Vijayakumar Durai 27 March 2019, 10:03:17 UTC rt2x00: do not increment sequence number while re-transmitting commit 746ba11f170603bf1eaade817553a6c2e9135bbe upstream. Currently rt2x00 devices retransmit the management frames with incremented sequence number if hardware is assigning the sequence. This is HW bug fixed already for non-QOS data frames, but it should be fixed for management frames except beacon. Without fix retransmitted frames have wrong SN: AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1 With the fix SN stays correctly the same: 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C Cc: stable@vger.kernel.org Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com> [sgruszka: simplify code, change comments and changelog] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
5e8002f Masami Hiramatsu 15 April 2019, 06:01:25 UTC kprobes: Fix error check when reusing optimized probes commit 5f843ed415581cfad4ef8fefe31c138a8346ca8a upstream. The following commit introduced a bug in one of our error paths: 819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") it missed to handle the return value of kprobe_optready() as error-value. In reality, the kprobe_optready() returns a bool result, so "true" case must be passed instead of 0. This causes some errors on kprobe boot-time selftests on ARM: [ ] Beginning kprobe tests... [ ] Probe ARM code [ ] kprobe [ ] kretprobe [ ] ARM instruction simulation [ ] Check decoding tables [ ] Run test cases [ ] FAIL: test_case_handler not run [ ] FAIL: Test andge r10, r11, r14, asr r7 [ ] FAIL: Scenario 11 ... [ ] FAIL: Scenario 7 [ ] Total instruction simulation tests=1631, pass=1433 fail=198 [ ] kprobe tests failed This can happen if an optimized probe is unregistered and next kprobe is registered on same address until the previous probe is not reclaimed. If this happens, a hidden aggregated probe may be kept in memory, and no new kprobe can probe same address. Also, in that case register_kprobe() will return "1" instead of minus error value, which can mislead caller logic. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v5.0+ Fixes: 819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
18a0a7c Masami Hiramatsu 23 February 2019, 16:50:20 UTC kprobes: Mark ftrace mcount handler functions nokprobe commit fabe38ab6b2bd9418350284c63825f13b8a6abba upstream. Mark ftrace mcount handler functions nokprobe since probing on these functions with kretprobe pushes return address incorrectly on kretprobe shadow stack. Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/155094062044.6137.6419622920568680640.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
877e9c5 Masami Hiramatsu 23 February 2019, 16:49:52 UTC x86/kprobes: Verify stack frame on kretprobe commit 3ff9c075cc767b3060bdac12da72fc94dd7da1b8 upstream. Verify the stack frame pointer on kretprobe trampoline handler, If the stack frame pointer does not match, it skips the wrong entry and tries to find correct one. This can happen if user puts the kretprobe on the function which can be used in the path of ftrace user-function call. Such functions should not be probed, so this adds a warning message that reports which function should be blacklisted. Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/155094059185.6137.15527904013362842072.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
1f2b61e Nathan Chancellor 17 April 2019, 07:21:21 UTC arm64: futex: Restore oldval initialization to work around buggy compilers commit ff8acf929014b7f87315588e0daf8597c8aa9d1c upstream. Commit 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: stable@vger.kernel.org Fixes: 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:38 UTC
4de25ac Eric Biggers 31 March 2019, 20:04:11 UTC crypto: x86/poly1305 - fix overflow during partial reduction commit 678cce4019d746da6c680c48ba9e6d417803e127 upstream. The x86_64 implementation of Poly1305 produces the wrong result on some inputs because poly1305_4block_avx2() incorrectly assumes that when partially reducing the accumulator, the bits carried from limb 'd4' to limb 'h0' fit in a 32-bit integer. This is true for poly1305-generic which processes only one block at a time. However, it's not true for the AVX2 implementation, which processes 4 blocks at a time and therefore can produce intermediate limbs about 4x larger. Fix it by making the relevant calculations use 64-bit arithmetic rather than 32-bit. Note that most of the carries already used 64-bit arithmetic, but the d4 -> h0 carry was different for some reason. To be safe I also made the same change to the corresponding SSE2 code, though that only operates on 1 or 2 blocks at a time. I don't think it's really needed for poly1305_block_sse2(), but it doesn't hurt because it's already x86_64 code. It *might* be needed for poly1305_2block_sse2(), but overflows aren't easy to reproduce there. This bug was originally detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. But also add a test vector which reproduces it directly (in the AVX2 case). Fixes: b1ccc8f4b631 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64") Fixes: c70f4abef07a ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64") Cc: <stable@vger.kernel.org> # v4.3+ Cc: Martin Willi <martin@strongswan.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
bb461ad Andrea Arcangeli 19 April 2019, 00:50:52 UTC coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping commit 04f5866e41fb70690e28397487d8bd8eea7d712a upstream. The core dumping code has always run without holding the mmap_sem for writing, despite that is the only way to ensure that the entire vma layout will not change from under it. Only using some signal serialization on the processes belonging to the mm is not nearly enough. This was pointed out earlier. For example in Hugh's post from Jul 2017: https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils "Not strictly relevant here, but a related note: I was very surprised to discover, only quite recently, how handle_mm_fault() may be called without down_read(mmap_sem) - when core dumping. That seems a misguided optimization to me, which would also be nice to correct" In particular because the growsdown and growsup can move the vm_start/vm_end the various loops the core dump does around the vma will not be consistent if page faults can happen concurrently. Pretty much all users calling mmget_not_zero()/get_task_mm() and then taking the mmap_sem had the potential to introduce unexpected side effects in the core dumping code. Adding mmap_sem for writing around the ->core_dump invocation is a viable long term fix, but it requires removing all copy user and page faults and to replace them with get_dump_page() for all binary formats which is not suitable as a short term fix. For the time being this solution manually covers the places that can confuse the core dump either by altering the vma layout or the vma flags while it runs. Once ->core_dump runs under mmap_sem for writing the function mmget_still_valid() can be dropped. Allowing mmap_sem protected sections to run in parallel with the coredump provides some minor parallelism advantage to the swapoff code (which seems to be safe enough by never mangling any vma field and can keep doing swapins in parallel to the core dumping) and to some other corner case. In order to facilitate the backporting I added "Fixes: 86039bd3b4e6" however the side effect of this same race condition in /proc/pid/mem should be reproducible since before 2.6.12-rc2 so I couldn't add any other "Fixes:" because there's no hash beyond the git genesis commit. Because find_extend_vma() is the only location outside of the process context that could modify the "mm" structures under mmap_sem for reading, by adding the mmget_still_valid() check to it, all other cases that take the mmap_sem for reading don't need the new check after mmget_not_zero()/get_task_mm(). The expand_stack() in page fault context also doesn't need the new check, because all tasks under core dumping are frozen. Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Jann Horn <jannh@google.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jann Horn <jannh@google.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
c197e46 Suthikulpanit, Suravee 20 March 2019, 08:12:28 UTC Revert "svm: Fix AVIC incomplete IPI emulation" commit 4a58038b9e420276157785afa0a0bbb4b9bc2265 upstream. This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57. As Oren Twaig pointed out the old discussion: https://patchwork.kernel.org/patch/8292231/ that the change coud potentially cause an extra IPI to be sent to the destination vcpu because the AVIC hardware already set the IRR bit before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running). Since writting to ICR and ICR2 will also set the IRR. If something triggers the destination vcpu to get scheduled before the emulation finishes, then this could result in an additional IPI. Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Oren Twaig <oren@scalemp.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
bc6b83d Saurav Kashyap 18 April 2019, 10:40:12 UTC Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO" commit 0228034d8e5915b98c33db35a98f5e909e848ae9 upstream. This patch clears FC_RP_STARTED flag during logoff, because of this re-login(flogi) didn't happen to the switch. This reverts commit 1550ec458e0cf1a40a170ab1f4c46e3f52860f65. Fixes: 1550ec458e0c ("scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Reviewed-by: Hannes Reinecke <hare@#suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
49c6798 Jaesoo Lee 10 April 2019, 00:02:22 UTC scsi: core: set result when the command cannot be dispatched commit be549d49115422f846b6d96ee8fd7173a5f7ceb0 upstream. When SCSI blk-mq is enabled, there is a bug in handling errors in scsi_queue_rq. Specifically, the bug is not setting result field of scsi_request correctly when the dispatch of the command has been failed. Since the upper layer code including the sg_io ioctl expects to receive any error status from result field of scsi_request, the error is silently ignored and this could cause data corruptions for some applications. Fixes: d285203cf647 ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> Signed-off-by: Jaesoo Lee <jalee@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
d11a33e Takashi Iwai 16 April 2019, 15:06:33 UTC ALSA: core: Fix card races between register and disconnect commit 2a3f7221acddfe1caa9ff09b3a8158c39b2fdeac upstream. There is a small race window in the card disconnection code that allows the registration of another card with the very same card id. This leads to a warning in procfs creation as caught by syzkaller. The problem is that we delete snd_cards and snd_cards_lock entries at the very beginning of the disconnection procedure. This makes the slot available to be assigned for another card object while the disconnection procedure is being processed. Then it becomes possible to issue a procfs registration with the existing file name although we check the conflict beforehand. The fix is simply to move the snd_cards and snd_cards_lock clearances at the end of the disconnection procedure. The references to these entries are merely either from the global proc files like /proc/asound/cards or from the card registration / disconnection, so it should be fine to shift at the very end. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
cfb5fb0 Hui Wang 17 April 2019, 08:10:32 UTC ALSA: hda/realtek - add two more pin configuration sets to quirk table commit b26e36b7ef36a8a3a147b1609b2505f8a4ecf511 upstream. We have two Dell laptops which have the codec 10ec0236 and 10ec0256 respectively, the headset mic on them can't work, need to apply the quirk of ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. So adding their pin configurations in the pin quirk table. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
9ae4c50 Ian Abbott 15 April 2019, 11:43:02 UTC staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf commit af4b54a2e5ba18259ff9aac445bf546dd60d037e upstream. `ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `ni6501_detach()` will be called from the core comedi module code to clean up. `ni6501_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already beed freed, leading to a double-free error. Fix it bu removing the call to `kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying on `ni6501_detach()` to free the memory. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:37 UTC
72cd1a3 Ian Abbott 15 April 2019, 11:43:01 UTC staging: comedi: ni_usb6501: Fix use of uninitialized mutex commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
9de6de2 Ian Abbott 15 April 2019, 11:52:30 UTC staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf commit 663d294b4768bfd89e529e069bffa544a830b5bf upstream. `vmk80xx_alloc_usb_buffers()` is called from `vmk80xx_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `vmk80xx_detach()` will be called from the core comedi module code to clean up. `vmk80xx_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already been freed, leading to a double-free error. Fix it by removing the call to `kfree(devpriv->usb_rx_buf)` from `vmk80xx_alloc_usb_buffers()`, relying on `vmk80xx_detach()` to free the memory. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
586f669 Ian Abbott 15 April 2019, 11:10:14 UTC staging: comedi: vmk80xx: Fix use of uninitialized semaphore commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
de970d4 he, bo 06 March 2019, 02:32:20 UTC io: accel: kxcjk1013: restore the range after resume. commit fe2d3df639a7940a125a33d6460529b9689c5406 upstream. On some laptops, kxcjk1013 is powered off when system enters S3. We need restore the range regiter during resume. Otherwise, the sensor doesn't work properly after S3. Signed-off-by: he, bo <bo.he@intel.com> Signed-off-by: Chen, Hu <hu1.chen@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
0386fd6 Fabrice Gasnier 25 March 2019, 13:01:23 UTC iio: core: fix a possible circular locking dependency commit 7f75591fc5a123929a29636834d1bcb8b5c9fee3 upstream. This fixes a possible circular locking dependency detected warning seen with: - CONFIG_PROVE_LOCKING=y - consumer/provider IIO devices (ex: "voltage-divider" consumer of "adc") When using the IIO consumer interface, e.g. iio_channel_get(), the consumer device will likely call iio_read_channel_raw() or similar that rely on 'info_exist_lock' mutex. typically: ... mutex_lock(&chan->indio_dev->info_exist_lock); if (chan->indio_dev->info == NULL) { ret = -ENODEV; goto err_unlock; } ret = do_some_ops() err_unlock: mutex_unlock(&chan->indio_dev->info_exist_lock); return ret; ... Same mutex is also hold in iio_device_unregister(). The following deadlock warning happens when: - the consumer device has called an API like iio_read_channel_raw() at least once. - the consumer driver is unregistered, removed (unbind from sysfs) ====================================================== WARNING: possible circular locking dependency detected 4.19.24 #577 Not tainted ------------------------------------------------------ sh/372 is trying to acquire lock: (kn->count#30){++++}, at: kernfs_remove_by_name_ns+0x3c/0x84 but task is already holding lock: (&dev->info_exist_lock){+.+.}, at: iio_device_unregister+0x18/0x60 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&dev->info_exist_lock){+.+.}: __mutex_lock+0x70/0xa3c mutex_lock_nested+0x1c/0x24 iio_read_channel_raw+0x1c/0x60 iio_read_channel_info+0xa8/0xb0 dev_attr_show+0x1c/0x48 sysfs_kf_seq_show+0x84/0xec seq_read+0x154/0x528 __vfs_read+0x2c/0x15c vfs_read+0x8c/0x110 ksys_read+0x4c/0xac ret_fast_syscall+0x0/0x28 0xbedefb60 -> #0 (kn->count#30){++++}: lock_acquire+0xd8/0x268 __kernfs_remove+0x288/0x374 kernfs_remove_by_name_ns+0x3c/0x84 remove_files+0x34/0x78 sysfs_remove_group+0x40/0x9c sysfs_remove_groups+0x24/0x34 device_remove_attrs+0x38/0x64 device_del+0x11c/0x360 cdev_device_del+0x14/0x2c iio_device_unregister+0x24/0x60 release_nodes+0x1bc/0x200 device_release_driver_internal+0x1a0/0x230 unbind_store+0x80/0x130 kernfs_fop_write+0x100/0x1e4 __vfs_write+0x2c/0x160 vfs_write+0xa4/0x17c ksys_write+0x4c/0xac ret_fast_syscall+0x0/0x28 0xbe906840 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->info_exist_lock); lock(kn->count#30); lock(&dev->info_exist_lock); lock(kn->count#30); *** DEADLOCK *** ... cdev_device_del() can be called without holding the lock. It should be safe as info_exist_lock prevents kernelspace consumers to use the exported routines during/after provider removal. cdev_device_del() is for userspace. Help to reproduce: See example: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt sysv { compatible = "voltage-divider"; io-channels = <&adc 0>; output-ohms = <22>; full-ohms = <222>; }; First, go to iio:deviceX for the "voltage-divider", do one read: $ cd /sys/bus/iio/devices/iio:deviceX $ cat in_voltage0_raw Then, unbind the consumer driver. It triggers above deadlock warning. $ cd /sys/bus/platform/drivers/iio-rescale/ $ echo sysv > unbind Note I don't actually expect stable will pick this up all the way back into IIO being in staging, but if's probably valid that far back. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Fixes: ac917a81117c ("staging:iio:core set the iio_dev.info pointer to null on unregister") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
fe400da Georg Ottinger 30 January 2019, 13:42:02 UTC iio: adc: at91: disable adc channel interrupt in timeout case commit 09c6bdee51183a575bf7546890c8c137a75a2b44 upstream. Having a brief look at at91_adc_read_raw() it is obvious that in the case of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is omitted. If 2 different channels are queried we can end up with a situation where two interrupts are enabled, but only one interrupt is cleared in the interrupt handler. Resulting in a interrupt loop and a system hang. Signed-off-by: Georg Ottinger <g.ottinger@abatec.at> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
1ae7297 Lars-Peter Clausen 20 February 2019, 15:11:32 UTC iio: Fix scan mask selection commit 20ea39ef9f2f911bd01c69519e7d69cfec79fde3 upstream. The trialmask is expected to have all bits set to 0 after allocation. Currently kmalloc_array() is used which does not zero the memory and so random bits are set. This results in random channels being enabled when they shouldn't. Replace kmalloc_array() with kcalloc() which has the same interface but zeros the memory. Note the fix is actually required earlier than the below fixes tag, but will require a manual backport due to move from kmalloc to kmalloc_array. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Fixes commit 057ac1acdfc4 ("iio: Use kmalloc_array() in iio_scan_mask_set()"). Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
8ba5d59 Jean-Francois Dagenais 06 March 2019, 20:56:06 UTC iio: dac: mcp4725: add missing powerdown bits in store eeprom commit 06003531502d06bc89d32528f6ec96bf978790f9 upstream. When issuing the write DAC register and write eeprom command, the two powerdown bits (PD0 and PD1) are assumed by the chip to be present in the bytes sent. Leaving them at 0 implies "powerdown disabled" which is a different state that the current one. By adding the current state of the powerdown in the i2c write, the chip will correctly power-on exactly like as it is at the moment of store_eeprom call. This is documented in MCP4725's datasheet, FIGURE 6-2: "Write Commands for DAC Input Register and EEPROM" and MCP4726's datasheet, FIGURE 6-3: "Write All Memory Command". Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
ad0f65c Dragos Bogdan 19 March 2019, 10:47:00 UTC iio: ad_sigma_delta: select channel when reading register commit fccfb9ce70ed4ea7a145f77b86de62e38178517f upstream. The desired channel has to be selected in order to correctly fill the buffer with the corresponding data. The `ad_sd_write_reg()` already does this, but for the `ad_sd_read_reg_raw()` this was omitted. Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:36 UTC
0336305 Gwendal Grignou 13 March 2019, 11:40:02 UTC iio: cros_ec: Fix the maths for gyro scale calculation commit 3d02d7082e5823598090530c3988a35f69689943 upstream. Calculation did not use IIO_DEGREE_TO_RAD and implemented a variant to avoid precision loss as we aim a nano value. The offset added to avoid rounding error, though, doesn't give us a close result to the expected value. E.g. For 1000dps, the result should be: (1000 * pi ) / 180 >> 15 ~= 0.000532632218 But with current calculation we get $ cat scale 0.000547890 Fix the calculation by just doing the maths involved for a nano value val * pi * 10e12 / (180 * 2^15) so we get a closer result. $ cat scale 0.000532632 Fixes: c14dca07a31d ("iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
f245ce4 Mike Looijmans 13 February 2019, 07:41:47 UTC iio/gyro/bmg160: Use millidegrees for temperature scale commit 40a7198a4a01037003c7ca714f0d048a61e729ac upstream. Standard unit for temperature is millidegrees Celcius, whereas this driver was reporting in degrees. Fix the scale factor in the driver. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
b7ad00c Sergey Larin 02 March 2019, 16:54:55 UTC iio: gyro: mpu3050: fix chip ID reading commit 409a51e0a4a5f908763191fae2c29008632eb712 upstream. According to the datasheet, the last bit of CHIP_ID register controls I2C bus, and the first one is unused. Handle this correctly. Note that there are chips out there that have a value such that the id check currently fails. Signed-off-by: Sergey Larin <cerg2010cerg2010@mail.ru> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
63aafa6 Mircea Caprioru 20 February 2019, 11:08:20 UTC staging: iio: ad7192: Fix ad7193 channel address commit 7ce0f216221856a17fc4934b39284678a5fef2e9 upstream. This patch fixes the differential channels addresses for the ad7193. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
b69e4d5 Leonard Pollak 13 February 2019, 10:19:52 UTC Staging: iio: meter: fixed typo commit 0a8a29be499cbb67df79370aaf5109085509feb8 upstream. This patch fixes an obvious typo, which will cause erroneously returning the Peak Voltage instead of the Peak Current. Signed-off-by: Leonard Pollak <leonardp@tr-host.de> Cc: <Stable@vger.kernel.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
8091c2a Vitaly Kuznetsov 03 April 2019, 14:06:42 UTC KVM: x86: svm: make sure NMI is injected after nmi_singlestep commit 99c221796a810055974b54c02e8f53297e48d146 upstream. I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P, the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing shows that we're sometimes able to deliver a few but never all. When we're trying to inject an NMI we may fail to do so immediately for various reasons, however, we still need to inject it so enable_nmi_window() arms nmi_singlestep mode. #DB occurs as expected, but we're not checking for pending NMIs before entering the guest and unless there's a different event to process, the NMI will never get delivered. Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure pending NMIs are checked and possibly injected. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
bc19194 Sean Christopherson 02 April 2019, 15:10:47 UTC KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU commit 8f4dc2e77cdfaf7e644ef29693fa229db29ee1de upstream. Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
53fc31a Aurelien Aptel 29 March 2019, 09:49:12 UTC CIFS: keep FileInfo handle live during oplock break commit b98749cac4a695f084a5ff076f4510b23e353ecd upstream. In the oplock break handler, writing pending changes from pages puts the FileInfo handle. If the refcount reaches zero it closes the handle and waits for any oplock break handler to return, thus causing a deadlock. To prevent this situation: * We add a wait flag to cifsFileInfo_put() to decide whether we should wait for running/pending oplock break handlers * We keep an additionnal reference of the SMB FileInfo handle so that for the rest of the handler putting the handle won't close it. - The ref is bumped everytime we queue the handler via the cifs_queue_oplock_break() helper. - The ref is decremented at the end of the handler This bug was triggered by xfstest 464. Also important fix to address the various reports of oops in smb2_push_mandatory_locks Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
4a692bc Matteo Croce 11 April 2019, 10:26:33 UTC net: thunderx: don't allow jumbo frames with XDP [ Upstream commit 1f227d16083b2e280b7dde4ca78883d75593f2fd ] The thunderx driver forbids to load an eBPF program if the MTU is too high, but this can be circumvented by loading the eBPF, then raising the MTU. Fix this by limiting the MTU if an eBPF program is already loaded. Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:35 UTC
6d5d30e Matteo Croce 11 April 2019, 10:26:32 UTC net: thunderx: raise XDP MTU to 1508 [ Upstream commit 5ee15c101f29e0093ffb5448773ccbc786eb313b ] The thunderx driver splits frames bigger than 1530 bytes to multiple pages, making impossible to run an eBPF program on it. This leads to a maximum MTU of 1508 if QinQ is in use. The thunderx driver forbids to load an eBPF program if the MTU is higher than 1500 bytes. Raise the limit to 1508 so it is possible to use L2 protocols which need some more headroom. Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
0a7e830 Eric Dumazet 14 April 2019, 00:32:21 UTC ipv4: ensure rcu_read_lock() in ipv4_link_failure() [ Upstream commit c543cb4a5f07e09237ec0fc2c60c9f131b2c79ad ] fib_compute_spec_dst() needs to be called under rcu protection. syzbot reported : WARNING: suspicious RCU usage 5.1.0-rc4+ #165 Not tainted include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by swapper/0/0: #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline] #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline] fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294 spec_dst_fill net/ipv4/ip_options.c:245 [inline] __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
3d988fc Stephen Suryaputra 12 April 2019, 20:19:27 UTC ipv4: recompile ip options in ipv4_link_failure [ Upstream commit ed0de45a1008991fdaa27a0152befcb74d126a8b ] Recompile IP options since IPCB may not be valid anymore when ipv4_link_failure is called from arp_error_report. Refer to the commit 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error") and the commit before that (9ef6b42ad6fd) for a similar issue. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
f052baf Jason Wang 09 April 2019, 04:10:25 UTC vhost: reject zero size iova range [ Upstream commit 813dbeb656d6c90266f251d8bd2b02d445afa63f ] We used to accept zero size iova range which will lead a infinite loop in translate_desc(). Fixing this by failing the request in this case. Reported-by: syzbot+d21e6e297322a900c128@syzkaller.appspotmail.com Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
b205097 Hangbin Liu 08 April 2019, 08:45:17 UTC team: set slave to promisc if team is already in promisc mode [ Upstream commit 43c2adb9df7ddd6560fd3546d925b42cef92daa0 ] After adding a team interface to bridge, the team interface will enter promisc mode. Then if we add a new slave to team0, the slave will keep promisc off. Fix it by setting slave to promisc on if team master is already in promisc mode, also do the same for allmulti. v2: add promisc and allmulti checking when delete ports Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
07b1747 Eric Dumazet 16 April 2019, 17:55:20 UTC tcp: tcp_grow_window() needs to respect tcp_space() [ Upstream commit 50ce163a72d817a99e8974222dcf2886d5deb1ae ] For some reason, tcp_grow_window() correctly tests if enough room is present before attempting to increase tp->rcv_ssthresh, but does not prevent it to grow past tcp_space() This is causing hard to debug issues, like failing the (__tcp_select_window(sk) >= tp->rcv_wnd) test in __tcp_ack_snd_check(), causing ACK delays and possibly slow flows. Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio, we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000" after about 60 round trips, when the active side no longer sends immediate acks. This bug predates git history. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
8835f1c Lorenzo Bianconi 09 April 2019, 09:47:20 UTC net: fou: do not use guehdr after iptunnel_pull_offloads in gue_udp_recv [ Upstream commit 988dc4a9a3b66be75b30405a5494faf0dc7cffb6 ] gue tunnels run iptunnel_pull_offloads on received skbs. This can determine a possible use-after-free accessing guehdr pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
c1e7e01 Nikolay Aleksandrov 11 April 2019, 12:08:25 UTC net: bridge: multicast: use rcu to access port list from br_multicast_start_querier [ Upstream commit c5b493ce192bd7a4e7bd073b5685aad121eeef82 ] br_multicast_start_querier() walks over the port list but it can be called from a timer with only multicast_lock held which doesn't protect the port list, so use RCU to walk over it. Fixes: c83b8fab06fc ("bridge: Restart queries when last querier expires") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:34 UTC
a1a9b69 Nikolay Aleksandrov 11 April 2019, 10:56:39 UTC net: bridge: fix per-port af_packet sockets [ Upstream commit 3b2e2904deb314cc77a2192f506f2fd44e3d10d0 ] When the commit below was introduced it changed two visible things: - the skb was no longer passed through the protocol handlers with the original device - the skb was passed up the stack with skb->dev = bridge The first change broke af_packet sockets on bridge ports. For example we use them for hostapd which listens for ETH_P_PAE packets on the ports. We discussed two possible fixes: - create a clone and pass it through NF_HOOK(), act on the original skb based on the result - somehow signal to the caller from the okfn() that it was called, meaning the skb is ok to be passed, which this patch is trying to implement via returning 1 from the bridge link-local okfn() Note that we rely on the fact that NF_QUEUE/STOLEN would return 0 and drop/error would return < 0 thus the okfn() is called only when the return was 1, so we signal to the caller that it was called by preserving the return value from nf_hook(). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:33 UTC
9fac50c Gustavo A. R. Silva 15 April 2019, 20:57:23 UTC net: atm: Fix potential Spectre v1 vulnerabilities [ Upstream commit 899537b73557aafbdd11050b501cf54b4f5c45af ] arg is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:715 lec_mcast_attach() warn: potential spectre issue 'dev_lec' [r] (local cap) Fix this by sanitizing arg before using it to index dev_lec. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:33 UTC
a1b3ec2 Sabrina Dubroca 12 April 2019, 13:04:10 UTC bonding: fix event handling for stacked bonds [ Upstream commit 92480b3977fd3884649d404cbbaf839b70035699 ] When a bond is enslaved to another bond, bond_netdev_event() only handles the event as if the bond is a master, and skips treating the bond as a slave. This leads to a refcount leak on the slave, since we don't remove the adjacency to its master and the master holds a reference on the slave. Reproducer: ip link add bondL type bond ip link add bondU type bond ip link set bondL master bondU ip link del bondL No "Fixes:" tag, this code is older than git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 April 2019, 07:35:33 UTC
68d7a45 Greg Kroah-Hartman 20 April 2019, 07:15:10 UTC Linux 4.14.113 20 April 2019, 07:15:10 UTC
76da427 Arnd Bergmann 06 March 2019, 10:52:36 UTC appletalk: Fix compile regression [ Upstream commit 27da0d2ef998e222a876c0cec72aa7829a626266 ] A bugfix just broke compilation of appletalk when CONFIG_SYSCTL is disabled: In file included from net/appletalk/ddp.c:65: net/appletalk/ddp.c: In function 'atalk_init': include/linux/atalk.h:164:34: error: expected expression before 'do' #define atalk_register_sysctl() do { } while(0) ^~ net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl' rc = atalk_register_sysctl(); This is easier to avoid by using conventional inline functions as stubs rather than macros. The header already has inline functions for other purposes, so I'm changing over all the macros for consistency. Fixes: 6377f787aeb9 ("appletalk: Fix use-after-free in atalk_proc_exit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 20 April 2019, 07:15:10 UTC
1e4bc57 Konstantin Khlebnikov 09 April 2019, 17:05:43 UTC mm: hide incomplete nr_indirectly_reclaimable in sysfs In upstream branch this fixed by commit b29940c1abd7 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). This fixes /sys/devices/system/node/node*/vmstat format: ... nr_dirtied 6613155 nr_written 5796802 11089216 ... Cc: <stable@vger.kernel.org> # 4.19.y Fixes: 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Roman Gushchin <guro@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:10 UTC
5661213 Lars Persson 15 April 2019, 07:49:47 UTC net: stmmac: Set dma ring length before enabling the DMA This was fixed in upstream by commit 7d9e6c5afab6 ("net: stmmac: Integrate XGMAC into main driver flow") that is a new feature commit. We found a race condition in the DMA init sequence that hits if the PHY already has link up during stmmac_hw_setup. Since the ring length was programmed after enabling the RX path, we might receive a packet before the correct ring length is programmed. When that happened we could not get reliable interrupts for DMA RX and the MTL complained about RX FIFO overrun. Signed-off-by: Lars Persson <larper@axis.com> Cc: stable@vger.kernel.org # 4.14.x Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:10 UTC
03f11a5 Balbir Singh 03 April 2019, 18:39:17 UTC bpf: Fix selftests are changes for CVE 2019-7308 The changes to fix the CVE 2019-7308 make the bpf verifier stricter with respect to operations that were allowed earlier in unprivileged mode. Fixup the test cases so that the error messages now correctly reflect pointer arithmetic going out of range for tests. Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:10 UTC
a042c21 Daniel Borkmann 03 April 2019, 18:39:16 UTC bpf: fix sanitation rewrite in case of non-pointers commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream. Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by: Marek Majkowski <marek@cloudflare.com> Reported-by: Arthur Fabre <afabre@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/ Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
12462c8 Xu Yu 03 April 2019, 18:39:15 UTC bpf: do not restore dst_reg when cur_state is freed commit 0803278b0b4d8eeb2b461fb698785df65a725d9e upstream. Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug. Call trace: dump_stack+0xbf/0x12e print_address_description+0x6a/0x280 kasan_report+0x237/0x360 sanitize_ptr_alu+0x85a/0x8d0 adjust_ptr_min_max_vals+0x8f2/0x1ca0 adjust_reg_min_max_vals+0x8ed/0x22e0 do_check+0x1ca6/0x5d00 bpf_check+0x9ca/0x2570 bpf_prog_load+0xc91/0x1030 __se_sys_bpf+0x61e/0x1f00 do_syscall_64+0xc8/0x550 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fault injection trace:  kfree+0xea/0x290  free_func_state+0x4a/0x60  free_verifier_state+0x61/0xe0  push_stack+0x216/0x2f0 <- inject failslab  sanitize_ptr_alu+0x2b1/0x8d0  adjust_ptr_min_max_vals+0x8f2/0x1ca0  adjust_reg_min_max_vals+0x8ed/0x22e0  do_check+0x1ca6/0x5d00  bpf_check+0x9ca/0x2570  bpf_prog_load+0xc91/0x1030  __se_sys_bpf+0x61e/0x1f00  do_syscall_64+0xc8/0x550  entry_SYSCALL_64_after_hwframe+0x49/0xbe When kzalloc() fails in push_stack(), free_verifier_state() will free current verifier state. As push_stack() returns, dst_reg was restored if ptr_is_dst_reg is false. However, as member of the cur_state, dst_reg is also freed, and error occurs when dereferencing dst_reg. Simply fix it by testing ret of push_stack() before restoring dst_reg. Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Xu Yu <xuyu@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
0ed998d Daniel Borkmann 03 April 2019, 18:39:14 UTC bpf: fix inner map masking to prevent oob under speculation commit 9d5564ddcf2a0f5ba3fa1c3a1f8a1b59ad309553 upstream. During review I noticed that inner meta map setup for map in map is buggy in that it does not propagate all needed data from the reference map which the verifier is later accessing. In particular one such case is index masking to prevent out of bounds access under speculative execution due to missing the map's unpriv_array/index_mask field propagation. Fix this such that the verifier is generating the correct code for inlined lookups in case of unpriviledged use. Before patch (test_verifier's 'map in map access' dump): # bpftool prog dump xla id 3 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:4] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking for 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+11 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | Index masking missing (!) 22: (35) if r0 >= 0x1 goto pc+3 | for inner map despite 23: (67) r0 <<= 3 | map->unpriv_array set. 24: (0f) r0 += r1 | 25: (05) goto pc+1 | 26: (b7) r0 = 0 | 27: (b7) r0 = 0 28: (95) exit After patch: # bpftool prog dump xla id 1 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:2] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Same inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking due to 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+12 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | 22: (35) if r0 >= 0x1 goto pc+4 | Now fixed inlined inner map 23: (54) (u32) r0 &= (u32) 0 | lookup with proper index masking 24: (67) r0 <<= 3 | for map->unpriv_array. 25: (0f) r0 += r1 | 26: (05) goto pc+1 | 27: (b7) r0 = 0 | 28: (b7) r0 = 0 29: (95) exit Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
6588a49 Daniel Borkmann 03 April 2019, 18:39:13 UTC bpf: fix sanitation of alu op with pointer / scalar type from different paths commit d3bd7413e0ca40b60cf60d4003246d067cafdeda upstream. While 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") took care of rejecting alu op on pointer when e.g. pointer came from two different map values with different map properties such as value size, Jann reported that a case was not covered yet when a given alu op is used in both "ptr_reg += reg" and "numeric_reg += reg" from different branches where we would incorrectly try to sanitize based on the pointer's limit. Catch this corner case and reject the program instead. Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
ae03b6b Daniel Borkmann 03 April 2019, 18:39:12 UTC bpf: prevent out of bounds speculation on pointer arithmetic commit 979d63d50c0c0f7bc537bf821e056cc9fe5abd38 upstream. Jann reported that the original commit back in b2157399cc98 ("bpf: prevent out-of-bounds speculation") was not sufficient to stop CPU from speculating out of bounds memory access: While b2157399cc98 only focussed on masking array map access for unprivileged users for tail calls and data access such that the user provided index gets sanitized from BPF program and syscall side, there is still a more generic form affected from BPF programs that applies to most maps that hold user data in relation to dynamic map access when dealing with unknown scalars or "slow" known scalars as access offset, for example: - Load a map value pointer into R6 - Load an index into R7 - Do a slow computation (e.g. with a memory dependency) that loads a limit into R8 (e.g. load the limit from a map for high latency, then mask it to make the verifier happy) - Exit if R7 >= R8 (mispredicted branch) - Load R0 = R6[R7] - Load R0 = R6[R0] For unknown scalars there are two options in the BPF verifier where we could derive knowledge from in order to guarantee safe access to the memory: i) While </>/<=/>= variants won't allow to derive any lower or upper bounds from the unknown scalar where it would be safe to add it to the map value pointer, it is possible through ==/!= test however. ii) another option is to transform the unknown scalar into a known scalar, for example, through ALU ops combination such as R &= <imm> followed by R |= <imm> or any similar combination where the original information from the unknown scalar would be destroyed entirely leaving R with a constant. The initial slow load still precedes the latter ALU ops on that register, so the CPU executes speculatively from that point. Once we have the known scalar, any compare operation would work then. A third option only involving registers with known scalars could be crafted as described in [0] where a CPU port (e.g. Slow Int unit) would be filled with many dependent computations such that the subsequent condition depending on its outcome has to wait for evaluation on its execution port and thereby executing speculatively if the speculated code can be scheduled on a different execution port, or any other form of mistraining as described in [1], for example. Given this is not limited to only unknown scalars, not only map but also stack access is affected since both is accessible for unprivileged users and could potentially be used for out of bounds access under speculation. In order to prevent any of these cases, the verifier is now sanitizing pointer arithmetic on the offset such that any out of bounds speculation would be masked in a way where the pointer arithmetic result in the destination register will stay unchanged, meaning offset masked into zero similar as in array_index_nospec() case. With regards to implementation, there are three options that were considered: i) new insn for sanitation, ii) push/pop insn and sanitation as inlined BPF, iii) reuse of ax register and sanitation as inlined BPF. Option i) has the downside that we end up using from reserved bits in the opcode space, but also that we would require each JIT to emit masking as native arch opcodes meaning mitigation would have slow adoption till everyone implements it eventually which is counter-productive. Option ii) and iii) have both in common that a temporary register is needed in order to implement the sanitation as inlined BPF since we are not allowed to modify the source register. While a push / pop insn in ii) would be useful to have in any case, it requires once again that every JIT needs to implement it first. While possible, amount of changes needed would also be unsuitable for a -stable patch. Therefore, the path which has fewer changes, less BPF instructions for the mitigation and does not require anything to be changed in the JITs is option iii) which this work is pursuing. The ax register is already mapped to a register in all JITs (modulo arm32 where it's mapped to stack as various other BPF registers there) and used in constant blinding for JITs-only so far. It can be reused for verifier rewrites under certain constraints. The interpreter's tmp "register" has therefore been remapped into extending the register set with hidden ax register and reusing that for a number of instructions that needed the prior temporary variable internally (e.g. div, mod). This allows for zero increase in stack space usage in the interpreter, and enables (restricted) generic use in rewrites otherwise as long as such a patchlet does not make use of these instructions. The sanitation mask is dynamic and relative to the offset the map value or stack pointer currently holds. There are various cases that need to be taken under consideration for the masking, e.g. such operation could look as follows: ptr += val or val += ptr or ptr -= val. Thus, the value to be sanitized could reside either in source or in destination register, and the limit is different depending on whether the ALU op is addition or subtraction and depending on the current known and bounded offset. The limit is derived as follows: limit := max_value_size - (smin_value + off). For subtraction: limit := umax_value + off. This holds because we do not allow any pointer arithmetic that would temporarily go out of bounds or would have an unknown value with mixed signed bounds where it is unclear at verification time whether the actual runtime value would be either negative or positive. For example, we have a derived map pointer value with constant offset and bounded one, so limit based on smin_value works because the verifier requires that statically analyzed arithmetic on the pointer must be in bounds, and thus it checks if resulting smin_value + off and umax_value + off is still within map value bounds at time of arithmetic in addition to time of access. Similarly, for the case of stack access we derive the limit as follows: MAX_BPF_STACK + off for subtraction and -off for the case of addition where off := ptr_reg->off + ptr_reg->var_off.value. Subtraction is a special case for the masking which can be in form of ptr += -val, ptr -= -val, or ptr -= val. In the first two cases where we know that the value is negative, we need to temporarily negate the value in order to do the sanitation on a positive value where we later swap the ALU op, and restore original source register if the value was in source. The sanitation of pointer arithmetic alone is still not fully sufficient as is, since a scenario like the following could happen ... PTR += 0x1000 (e.g. K-based imm) PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON PTR += 0x1000 PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON [...] ... which under speculation could end up as ... PTR += 0x1000 PTR -= 0 [ truncated by mitigation ] PTR += 0x1000 PTR -= 0 [ truncated by mitigation ] [...] ... and therefore still access out of bounds. To prevent such case, the verifier is also analyzing safety for potential out of bounds access under speculative execution. Meaning, it is also simulating pointer access under truncation. We therefore "branch off" and push the current verification state after the ALU operation with known 0 to the verification stack for later analysis. Given the current path analysis succeeded it is likely that the one under speculation can be pruned. In any case, it is also subject to existing complexity limits and therefore anything beyond this point will be rejected. In terms of pruning, it needs to be ensured that the verification state from speculative execution simulation must never prune a non-speculative execution path, therefore, we mark verifier state accordingly at the time of push_stack(). If verifier detects out of bounds access under speculative execution from one of the possible paths that includes a truncation, it will reject such program. Given we mask every reg-based pointer arithmetic for unprivileged programs, we've been looking into how it could affect real-world programs in terms of size increase. As the majority of programs are targeted for privileged-only use case, we've unconditionally enabled masking (with its alu restrictions on top of it) for privileged programs for the sake of testing in order to check i) whether they get rejected in its current form, and ii) by how much the number of instructions and size will increase. We've tested this by using Katran, Cilium and test_l4lb from the kernel selftests. For Katran we've evaluated balancer_kern.o, Cilium bpf_lxc.o and an older test object bpf_lxc_opt_-DUNKNOWN.o and l4lb we've used test_l4lb.o as well as test_l4lb_noinline.o. We found that none of the programs got rejected by the verifier with this change, and that impact is rather minimal to none. balancer_kern.o had 13,904 bytes (1,738 insns) xlated and 7,797 bytes JITed before and after the change. Most complex program in bpf_lxc.o had 30,544 bytes (3,817 insns) xlated and 18,538 bytes JITed before and after and none of the other tail call programs in bpf_lxc.o had any changes either. For the older bpf_lxc_opt_-DUNKNOWN.o object we found a small increase from 20,616 bytes (2,576 insns) and 12,536 bytes JITed before to 20,664 bytes (2,582 insns) and 12,558 bytes JITed after the change. Other programs from that object file had similar small increase. Both test_l4lb.o had no change and remained at 6,544 bytes (817 insns) xlated and 3,401 bytes JITed and for test_l4lb_noinline.o constant at 5,080 bytes (634 insns) xlated and 3,313 bytes JITed. This can be explained in that LLVM typically optimizes stack based pointer arithmetic by using K-based operations and that use of dynamic map access is not overly frequent. However, in future we may decide to optimize the algorithm further under known guarantees from branch and value speculation. Latter seems also unclear in terms of prediction heuristics that today's CPUs apply as well as whether there could be collisions in e.g. the predictor's Value History/Pattern Table for triggering out of bounds access, thus masking is performed unconditionally at this point but could be subject to relaxation later on. We were generally also brainstorming various other approaches for mitigation, but the blocker was always lack of available registers at runtime and/or overhead for runtime tracking of limits belonging to a specific pointer. Thus, we found this to be minimally intrusive under given constraints. With that in place, a simple example with sanitized access on unprivileged load at post-verification time looks as follows: # bpftool prog dump xlated id 282 [...] 28: (79) r1 = *(u64 *)(r7 +0) 29: (79) r2 = *(u64 *)(r7 +8) 30: (57) r1 &= 15 31: (79) r3 = *(u64 *)(r0 +4608) 32: (57) r3 &= 1 33: (47) r3 |= 1 34: (2d) if r2 > r3 goto pc+19 35: (b4) (u32) r11 = (u32) 20479 | 36: (1f) r11 -= r2 | Dynamic sanitation for pointer 37: (4f) r11 |= r2 | arithmetic with registers 38: (87) r11 = -r11 | containing bounded or known 39: (c7) r11 s>>= 63 | scalars in order to prevent 40: (5f) r11 &= r2 | out of bounds speculation. 41: (0f) r4 += r11 | 42: (71) r4 = *(u8 *)(r4 +0) 43: (6f) r4 <<= r1 [...] For the case where the scalar sits in the destination register as opposed to the source register, the following code is emitted for the above example: [...] 16: (b4) (u32) r11 = (u32) 20479 17: (1f) r11 -= r2 18: (4f) r11 |= r2 19: (87) r11 = -r11 20: (c7) r11 s>>= 63 21: (5f) r2 &= r11 22: (0f) r2 += r0 23: (61) r0 = *(u32 *)(r2 +0) [...] JIT blinding example with non-conflicting use of r10: [...] d5: je 0x0000000000000106 _ d7: mov 0x0(%rax),%edi | da: mov $0xf153246,%r10d | Index load from map value and e0: xor $0xf153259,%r10 | (const blinded) mask with 0x1f. e7: and %r10,%rdi |_ ea: mov $0x2f,%r10d | f0: sub %rdi,%r10 | Sanitized addition. Both use r10 f3: or %rdi,%r10 | but do not interfere with each f6: neg %r10 | other. (Neither do these instructions f9: sar $0x3f,%r10 | interfere with the use of ax as temp fd: and %r10,%rdi | in interpreter.) 100: add %rax,%rdi |_ 103: mov 0x0(%rdi),%eax [...] Tested that it fixes Jann's reproducer, and also checked that test_verifier and test_progs suite with interpreter, JIT and JIT with hardening enabled on x86-64 and arm64 runs successfully. [0] Speculose: Analyzing the Security Implications of Speculative Execution in CPUs, Giorgi Maisuradze and Christian Rossow, https://arxiv.org/pdf/1801.04084.pdf [1] A Systematic Evaluation of Transient Execution Attacks and Defenses, Claudio Canella, Jo Van Bulck, Michael Schwarz, Moritz Lipp, Benjamin von Berg, Philipp Ortner, Frank Piessens, Dmitry Evtyushkin, Daniel Gruss, https://arxiv.org/pdf/1811.05441.pdf Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> [some checkpatch cleanups and backported to 4.14 by sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
4b756d9 Daniel Borkmann 03 April 2019, 18:39:11 UTC bpf: fix check_map_access smin_value test when pointer contains offset commit b7137c4eab85c1cf3d46acdde90ce1163b28c873 upstream. In check_map_access() we probe actual bounds through __check_map_access() with offset of reg->smin_value + off for lower bound and offset of reg->umax_value + off for the upper bound. However, even though the reg->smin_value could have a negative value, the final result of the sum with off could be positive when pointer arithmetic with known and unknown scalars is combined. In this case we reject the program with an error such as "R<x> min value is negative, either use unsigned index or do a if (index >=0) check." even though the access itself would be fine. Therefore extend the check to probe whether the actual resulting reg->smin_value + off is less than zero. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [backported to 4.14 sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
17efa65 Daniel Borkmann 03 April 2019, 18:39:10 UTC bpf: restrict unknown scalars of mixed signed bounds for unprivileged commit 9d7eceede769f90b66cfa06ad5b357140d5141ed upstream. For unknown scalars of mixed signed bounds, meaning their smin_value is negative and their smax_value is positive, we need to reject arithmetic with pointer to map value. For unprivileged the goal is to mask every map pointer arithmetic and this cannot reliably be done when it is unknown at verification time whether the scalar value is negative or positive. Given this is a corner case, the likelihood of breaking should be very small. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [backported to 4.14 sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
ba9d2e0 Daniel Borkmann 03 April 2019, 18:39:09 UTC bpf: restrict stack pointer arithmetic for unprivileged commit e4298d25830a866cc0f427d4bccb858e76715859 upstream. Restrict stack pointer arithmetic for unprivileged users in that arithmetic itself must not go out of bounds as opposed to the actual access later on. Therefore after each adjust_ptr_min_max_vals() with a stack pointer as a destination we simulate a check_stack_access() of 1 byte on the destination and once that fails the program is rejected for unprivileged program loads. This is analog to map value pointer arithmetic and needed for masking later on. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [backported to 4.14 sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:09 UTC
afb711a Daniel Borkmann 03 April 2019, 18:39:08 UTC bpf: restrict map value pointer arithmetic for unprivileged commit 0d6303db7970e6f56ae700fa07e11eb510cda125 upstream. Restrict map value pointer arithmetic for unprivileged users in that arithmetic itself must not go out of bounds as opposed to the actual access later on. Therefore after each adjust_ptr_min_max_vals() with a map value pointer as a destination it will simulate a check_map_access() of 1 byte on the destination and once that fails the program is rejected for unprivileged program loads. We use this later on for masking any pointer arithmetic with the remainder of the map value space. The likelihood of breaking any existing real-world unprivileged eBPF program is very small for this corner case. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
b101cf5 Daniel Borkmann 03 April 2019, 18:39:07 UTC bpf: enable access to ax register also from verifier rewrite commit 9b73bfdd08e73231d6a90ae6db4b46b3fbf56c30 upstream. Right now we are using BPF ax register in JIT for constant blinding as well as in interpreter as temporary variable. Verifier will not be able to use it simply because its use will get overridden from the former in bpf_jit_blind_insn(). However, it can be made to work in that blinding will be skipped if there is prior use in either source or destination register on the instruction. Taking constraints of ax into account, the verifier is then open to use it in rewrites under some constraints. Note, ax register already has mappings in every eBPF JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [backported to 4.14 sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
ee28297 Daniel Borkmann 03 April 2019, 18:39:06 UTC bpf: move tmp variable into ax register in interpreter commit 144cd91c4c2bced6eb8a7e25e590f6618a11e854 upstream. This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run() into the hidden ax register. The latter is currently only used in JITs for constant blinding as a temporary scratch register, meaning the BPF interpreter will never see the use of ax. Therefore it is safe to use it for the cases where tmp has been used earlier. This is needed to later on allow restricted hidden use of ax in both interpreter and JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [backported to 4.14 sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
6a42c49 Daniel Borkmann 03 April 2019, 18:39:05 UTC bpf: move {prev_,}insn_idx into verifier env commit c08435ec7f2bc8f4109401f696fd55159b4b40cb upstream. Move prev_insn_idx and insn_idx from the do_check() function into the verifier environment, so they can be read inside the various helper functions for handling the instructions. It's easier to put this into the environment rather than changing all call-sites only to pass it along. insn_idx is useful in particular since this later on allows to hold state in env->insn_aux_data[env->insn_idx]. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> [Backported to 4.14 by sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
8561489 Alexei Starovoitov 03 April 2019, 18:39:04 UTC bpf: fix stack state printing in verifier log commit 12a3cc8424fe1237aaeb982dec4f0914ddd22f3e upstream. fix incorrect stack state prints in print_verifier_state() Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
86e5dd8 Craig Gallek 03 April 2019, 18:39:03 UTC bpf: fix verifier NULL pointer dereference commit 8c01c4f896aa3404af948880dcb29a2d51c833dc upstream. do_check() can fail early without allocating env->cur_state under memory pressure. Syzkaller found the stack below on the linux-next tree because of this. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c2c74700 task.stack: ffff8801c3e28000 RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline] RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380 RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28 R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20 FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166 SYSC_bpf kernel/bpf/syscall.c:1690 [inline] SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x452869 RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869 RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005 RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550 R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000 Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26 RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8 RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8 ---[ end trace c8d37f339dc64004 ]--- Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Fixes: 1969db47f8d0 ("bpf: fix verifier memory leaks") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
534087e Alexei Starovoitov 03 April 2019, 18:39:02 UTC bpf: fix verifier memory leaks commit 1969db47f8d0e800397abd4ee4e8d27d2b578587 upstream. fix verifier memory leaks Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Signed-off-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
28356c2 Alexei Starovoitov 03 April 2019, 18:39:01 UTC bpf: reduce verifier memory consumption commit 638f5b90d46016372a8e3e0a434f199cc5e12b8c upstream. the verifier got progressively smarter over time and size of its internal state grew as well. Time to reduce the memory consumption. Before: sizeof(struct bpf_verifier_state) = 6520 After: sizeof(struct bpf_verifier_state) = 896 It's done by observing that majority of BPF programs use little to no stack whereas verifier kept all of 512 stack slots ready always. Instead dynamically reallocate struct verifier state when stack access is detected. Runtime difference before vs after is within a noise. The number of processed instructions stays the same. Cc: jakub.kicinski@netronome.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> [Backported to 4.14 by sblbir] Signed-off-by: Balbir Singh <sblbir@amzn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 20 April 2019, 07:15:08 UTC
8991f1a Mikulas Patocka 05 September 2018, 13:17:45 UTC dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock [ Upstream commit 432061b3da64e488be3403124a72a9250bbe96d4 ] There's a XFS on dm-crypt deadlock, recursing back to itself due to the crypto subsystems use of GFP_KERNEL, reported here: https://bugzilla.kernel.org/show_bug.cgi?id=200835 * dm-crypt calls crypt_convert in xts mode * init_crypt from xts.c calls kmalloc(GFP_KERNEL) * kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem tries to submit some bios and wait for them, causing a deadlock Fix this by updating both the DM crypt and integrity targets to no longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't recurse into a filesystem. A GFP_ATOMIC allocation can fail, but init_crypt() in xts.c handles the allocation failure gracefully - it will fall back to preallocated buffer if the allocation fails. The crypto API maintainer says that the crypto API only needs to allocate memory when dealing with unaligned buffers and therefore turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion: https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html ) Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org> 20 April 2019, 07:15:08 UTC
02c2de9 Daniel Borkmann 25 March 2019, 14:54:43 UTC bpf: fix use after free in bpf_evict_inode [ Upstream commit 1da6c4d9140cb7c13e87667dc4e1488d6c8fc10f ] syzkaller was able to generate the following UAF in bpf: BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline] BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423 CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+ #110 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 lookup_last fs/namei.c:2269 [inline] path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 filename_lookup+0x26a/0x520 fs/namei.c:2348 user_path_at_empty+0x40/0x50 fs/namei.c:2608 user_path include/linux/namei.h:62 [inline] do_mount+0x180/0x1ff0 fs/namespace.c:2980 ksys_mount+0x12d/0x140 fs/namespace.c:3258 __do_sys_mount fs/namespace.c:3272 [inline] __se_sys_mount fs/namespace.c:3269 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457569 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569 RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000 R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4 R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff Allocated by task 9424: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3722 [inline] __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737 kstrdup+0x39/0x70 mm/util.c:49 bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356 vfs_symlink+0x37a/0x5d0 fs/namei.c:4127 do_symlinkat+0x242/0x2d0 fs/namei.c:4154 __do_sys_symlink fs/namei.c:4173 [inline] __se_sys_symlink fs/namei.c:4171 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9425: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565 evict+0x4b9/0x980 fs/inode.c:558 iput_final fs/inode.c:1550 [inline] iput+0x674/0xa90 fs/inode.c:1576 do_unlinkat+0x733/0xa30 fs/namei.c:4069 __do_sys_unlink fs/namei.c:4110 [inline] __se_sys_unlink fs/namei.c:4108 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4108 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis: [...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...] Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do. And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback. Fixes: 0f98621bef5d ("bpf, inode: add support for symlinks and fix mtime/ctime") Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/ Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org> 20 April 2019, 07:15:07 UTC
c43e2bd Pi-Hsun Shih 13 March 2019, 18:44:33 UTC include/linux/swap.h: use offsetof() instead of custom __swapoffset macro [ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ] Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 20 April 2019, 07:15:07 UTC
back to top