Skip to main content

Browse the archive

https://github.com/torvalds/linux
13 June 2022, 11:31:42 UTC
sort by:
Revision Author Date Message Commit Date
aa773bf Clemens Ladisch 11 August 2013, 12:13:13 UTC ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection Commit aafe77cc45a5 (ALSA: usb-audio: add support for many Roland/Yamaha devices) had several logic errors that prevented create_auto_midi_quirk from enumerating any MIDI ports. Reported-by: Keith A. Milner <maillist@superlative.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 09:42:28 UTC
4c2aee0 Torsten Schenk 11 August 2013, 09:11:35 UTC ALSA: 6fire: make buffers DMA-able (midi) Patch makes midi output buffer DMA-able by allocating it separately. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 09:42:28 UTC
5ece263 Torsten Schenk 11 August 2013, 09:11:19 UTC ALSA: 6fire: make buffers DMA-able (pcm) Patch makes pcm buffers DMA-able by allocating each one separately. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 09:42:28 UTC
db8a38e Takashi Iwai 09 August 2013, 10:34:42 UTC ALSA: hda - Add pinfix for LG LW25 laptop Correct the pins for a line-in and a headphone on LG LW25 laptop with ALC880 codec. Other pins seem fine. Reported-and-tested-by: Joonas Saarinen <jonskunator@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 August 2013, 09:04:17 UTC
d4cca39 dingtianhong 09 August 2013, 09:12:58 UTC tipc: avoid possible deadlock while enable and disable bearer We met lockdep warning when enable and disable the bearer for commands such as: tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0 tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0 --------------------------------------------------- [ 327.693595] ====================================================== [ 327.693994] [ INFO: possible circular locking dependency detected ] [ 327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G O [ 327.694882] ------------------------------------------------------- [ 327.695385] tipc-config/5825 is trying to acquire lock: [ 327.695754] (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0 [ 327.696018] [ 327.696018] but task is already holding lock: [ 327.696018] (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+ 0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] which lock already depends on the new lock. [ 327.696018] [ 327.696018] [ 327.696018] the existing dependency chain (in reverse order) is: [ 327.696018] [ 327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}: [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80 [ 327.696018] [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc] [ 327.696018] [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0 [ 327.696018] [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0 [ 327.696018] [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0 [ 327.696018] [<ffffffff81053a35>] irq_exit+0xd5/0xe0 [ 327.696018] [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60 [ 327.696018] [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80 [ 327.696018] [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30 [ 327.696018] [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280 [ 327.696018] [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20 [ 327.696018] [<ffffffff81031589>] start_secondary+0x89/0x90 [ 327.696018] [ 327.696018] -> #0 (((timer))#2){+.-...}: [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b [ 327.696018] [ 327.696018] other info that might help us debug this: [ 327.696018] [ 327.696018] Possible unsafe locking scenario: [ 327.696018] [ 327.696018] CPU0 CPU1 [ 327.696018] ---- ---- [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] [ 327.696018] *** DEADLOCK *** [ 327.696018] [ 327.696018] 5 locks held by tipc-config/5825: [ 327.696018] #0: (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40 [ 327.696018] #1: (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0 [ 327.696018] #2: (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc] [ 327.696018] #3: (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc] [ 327.696018] #4: (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] stack backtrace: [ 327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G O 3.11.0-rc3-wwd- default #4 [ 327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 327.696018] 00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000 [ 327.696018] ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8 [ 327.696018] ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318 [ 327.696018] Call Trace: [ 327.696018] [<ffffffff814d03dd>] dump_stack+0x4d/0xa0 [ 327.696018] [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120 [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffff81218783>] ? security_capable+0x13/0x20 [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e608>] ? genl_rcv+0x18/0x40 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b ----------------------------------------------------------------------- The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the work, so the dead lock occurs. We should unlock the b_ptr->lock when del the disc_timeout(). Remove link_timeout() still met the same problem, the patch: http://article.gmane.org/gmane.network.tipc.general/4380 fix the problem, so no need to send patch for fix link_timeout() deadlock warming. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 August 2013, 04:58:41 UTC
3c322a5 Stephane Grosjean 09 August 2013, 09:44:06 UTC can: pcan_usb: fix wrong memcpy() bytes length Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 12 August 2013, 04:51:49 UTC
29d7919 Eric Dumazet 08 August 2013, 15:06:14 UTC macvtap: fix two races Since commit ac4e4af1e59e1 ("macvtap: Consistently use rcu functions"), Thomas gets two different warnings : BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45891/45892 caller is macvtap_do_read+0x45c/0x600 [macvtap] CPU: 1 PID: 45892 Comm: vhost-45891 Not tainted 3.11.0-bisecttest #13 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bcec>] dump_stack+0x74/0xd8 [<0000000000481066>] debug_smp_processor_id+0xf6/0x114 [<000003ff802e9a18>] macvtap_do_read+0x45c/0x600 [macvtap] [<000003ff802e9c1c>] macvtap_recvmsg+0x60/0x88 [macvtap] [<000003ff80318c5e>] handle_rx+0x5b2/0x800 [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<00000000006934a6>] kernel_thread_starter+0x6/0xc [<00000000006934a0>] kernel_thread_starter+0x0/0xc And BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45897/45898 caller is macvlan_start_xmit+0x10a/0x1b4 [macvlan] CPU: 1 PID: 45898 Comm: vhost-45897 Not tainted 3.11.0-bisecttest #16 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bdb8>] dump_stack+0x74/0xd4 [<0000000000481132>] debug_smp_processor_id+0xf6/0x114 [<000003ff802b72ca>] macvlan_start_xmit+0x10a/0x1b4 [macvlan] [<000003ff802ea69a>] macvtap_get_user+0x982/0xbc4 [macvtap] [<000003ff802ea92a>] macvtap_sendmsg+0x4e/0x60 [macvtap] [<000003ff8031947c>] handle_tx+0x494/0x5ec [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<000000000069356e>] kernel_thread_starter+0x6/0xc [<0000000000693568>] kernel_thread_starter+0x0/0xc 2 locks held by vhost-45897/45898: #0: (&vq->mutex){+.+.+.}, at: [<000003ff8031903c>] handle_tx+0x54/0x5ec [vhost_net] #1: (rcu_read_lock){.+.+..}, at: [<000003ff802ea53c>] macvtap_get_user+0x824/0xbc4 [macvtap] In the first case, macvtap_put_user() calls macvlan_count_rx() in a preempt-able context, and this is not allowed. In the second case, macvtap_get_user() calls macvlan_start_xmit() with BH enabled, and this is not allowed. Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com> Bisected-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 August 2013, 04:48:58 UTC
d4e4ab8 Linus Torvalds 12 August 2013, 01:04:20 UTC Linux 3.11-rc5 12 August 2013, 01:04:20 UTC
e5d081f Linus Torvalds 11 August 2013, 23:32:26 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is three bug fixes: An fnic warning caused by sleeping under a lock, a major regression with our updated WRITE SAME/UNMAP logic which caused tons of USB devices (and one RAID card) to cease to function and a megaraid_sas firmware initialisation problem which causes kdump failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set [SCSI] fnic: BUG: sleeping function called from invalid context during probe [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel 11 August 2013, 23:32:26 UTC
77f63b4 Linus Torvalds 11 August 2013, 19:12:39 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "This includes small series from Michael Neuling to fix a couple of nasty remaining problems with the new Power8 support, also targeted at stable 3.10, without which some new userspace accessible registers aren't properly context switched, and in some case, can be clobbered by the user of transactional memory. Along with that, a few slightly more minor things, such as a missing Kconfig option to enable handling of denorm exceptions when not running under a hypervisor (or userspace will randomly crash when hitting denorms with the vector unit), some nasty bugs in the new pstore oops code, and other simple bug fixes worth having in now. Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to handle KVM bits while he is on vacation. However I'll let him decide whether they should go to -stable or not when he is back" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs powerpc: Save the TAR register earlier powerpc: Fix context switch DSCR on POWER8 powerpc: Rework setting up H/FSCR bit definitions powerpc: Fix hypervisor facility unavaliable vector number powerpc/kvm/book3s_pr: Return appropriate error when allocation fails powerpc/kvm: Add signed type cast for comparation powerpc/eeh: Add missing procfs entry for PowerNV powerpc/pseries: Add backward compatibilty to read old kernel oops-log powerpc/pseries: Fix buffer overflow when reading from pstore powerpc: On POWERNV enable PPC_DENORMALISATION by default 11 August 2013, 19:12:39 UTC
30b229b Linus Torvalds 11 August 2013, 19:11:33 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull s390 kvm fixes from Paolo Bonzini: "Two fixes for s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix pfmf non-quiescing control handling KVM: s390: move kvm_guest_enter,exit closer to sie 11 August 2013, 19:11:33 UTC
9e6bdaa Linus Torvalds 11 August 2013, 19:10:47 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mv64xxx: Document the newly introduced allwinner compatible i2c: Fix Kontron PLD prescaler calculation i2c: i2c-mxs: Use DMA mode even for small transfers 11 August 2013, 19:10:47 UTC
e5ac5da David S. Miller 10 August 2013, 22:38:59 UTC Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge Included change: - reassign pointers to data after skb reallocation to avoid kernel paging errors Signed-off-by: David S. Miller <davem@davemloft.net> 10 August 2013, 22:38:59 UTC
d92581f Linus Torvalds 10 August 2013, 22:21:47 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are assorted fixes, mostly from Josef nailing down xfstests runs. Zach also has a long standing fix for problems with readdir wrapping f_pos (or ctx->pos) These patches were spread out over different bases, so I rebased things on top of rc4 and retested overnight" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: don't loop on large offsets in readdir Btrfs: check to see if root_list is empty before adding it to dead roots Btrfs: release both paths before logging dir/changed extents Btrfs: allow splitting of hole em's when dropping extent cache Btrfs: make sure the backref walker catches all refs to our extent Btrfs: fix backref walking when we hit a compressed extent Btrfs: do not offset physical if we're compressed Btrfs: fix extent buffer leak after backref walking Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified 10 August 2013, 22:21:47 UTC
b8ea0d0 Linus Torvalds 10 August 2013, 22:20:37 UTC Merge tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: - Stable patch for lockd to fix Oopses due to inappropriate calls to utsname()->nodename - Stable patches for sunrpc to fix Oopses on shutdown when using AF_LOCAL sockets with rpcbind - Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint - Fix a regression with the sync mount option failing to work for nfs4 mounts - Fix a writeback performance issue when doing cache invalidation - Remove an incorrect call to nfs_setsecurity in nfs_fhget * tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix up nfs4_proc_lookup_mountpoint NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget() NFSv4: Fix the sync mount option for nfs4 mounts NFS: Fix writeback performance issue on cache invalidation SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister SUNRPC: Don't auto-disconnect from the local rpcbind socket LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs 10 August 2013, 22:20:37 UTC
022e5d0 Linus Torvalds 10 August 2013, 22:19:58 UTC Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "Some fixes for a 4.1 feature that in retrospect probably should have waited for 3.12.... But it appears to be working now" * 'for-3.11' of git://linux-nfs.org/~bfields/linux: nfsd: Fix SP4_MACH_CRED negotiation in EXCHANGE_ID nfsd4: Fix MACH_CRED NULL dereference 10 August 2013, 22:19:58 UTC
9d2c948 Linus Lüssing 06 August 2013, 18:21:15 UTC batman-adv: fix potential kernel paging errors for unicast transmissions There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> 10 August 2013, 20:55:42 UTC
4209423 David S. Miller 10 August 2013, 20:44:22 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 10 August 2013, 20:44:22 UTC
1e24f76 Linus Torvalds 10 August 2013, 20:00:56 UTC Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A couple of USB-audio fixes that should also go to stable kernels" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: do not trust too-big wMaxPacketSize values ALSA: 6fire: fix DMA issues with URB transfer_buffer usage 10 August 2013, 20:00:56 UTC
356d7d8 Yuchung Cheng 10 August 2013, 00:21:27 UTC netfilter: nf_conntrack: fix tcp_in_window for Fast Open Currently the conntrack checks if the ending sequence of a packet falls within the observed receive window. However it does so even if it has not observe any packet from the remote yet and uses an uninitialized receive window (td_maxwin). If a connection uses Fast Open to send a SYN-data packet which is dropped afterward in the network. The subsequent SYNs retransmits will all fail this check and be discarded, leading to a connection timeout. This is because the SYN retransmit does not contain data payload so end == initial sequence number (isn) + 1 sender->td_end == isn + syn_data_len receiver->td_maxwin == 0 The fix is to only apply this check after td_maxwin is initialized. Reported-by: Michael Chan <mcfchan@stanford.edu> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 10 August 2013, 16:36:22 UTC
8ae3f1d Linus Torvalds 10 August 2013, 16:00:51 UTC Merge tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing huge, two IIO driver fixes, and a zcache fix. All of these have been in linux-next for a while" * tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: zcache: fix "zcache=" kernel parameter iio: ti_am335x_adc: Fix wrong samples received on 1st read iio:trigger: Fix use_count race condition 10 August 2013, 16:00:51 UTC
e6e8ac4 Linus Torvalds 10 August 2013, 16:00:21 UTC Merge tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 3 small USB fixes for 3.11-rc5. One is a fix that the ChromeOS developers ran into on some Intel hardware, one is a build fix, and the last is a MAINTAINERS update to help people figure out where to send USB network driver patches. All of these have been in linux-next for a while" * tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: MAINTAINERS: Add separate section for USB NETWORKING DRIVERS usb: xhci: add missing dma-mapping.h includes usb: core: don't try to reset_device() a port that got just disconnected 10 August 2013, 16:00:21 UTC
6453599 Sridhar Samudrala 08 August 2013, 22:19:48 UTC rtnetlink: Fix inverted check in ndo_dflt_fdb_del() Fix inverted check when deleting an fdb entry. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 August 2013, 08:24:12 UTC
db62efb Zach Brown 11 July 2013, 23:19:42 UTC btrfs: don't loop on large offsets in readdir When btrfs readdir() hits the last entry it sets the readdir offset to a huge value to stop buggy apps from breaking when the same name is returned by readdir() with concurrent rename()s. But unconditionally setting the offset to INT_MAX causes readdir() to loop returning any entries with offsets past INT_MAX. It only takes a few hours of constant file creation and removal to create entries past INT_MAX. So let's set the huge offset to LLONG_MAX if the last entry has already overflowed 32bit loff_t. Without large offsets behaviour is identical. With large offsets 64bit apps will work and 32bit apps will be no more broken than they currently are if they see large offsets. Signed-off-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:34:56 UTC
cfad392 Josef Bacik 25 July 2013, 19:11:47 UTC Btrfs: check to see if root_list is empty before adding it to dead roots A user reported a panic when running with autodefrag and deleting snapshots. This is because we could end up trying to add the root to the dead roots list twice. To fix this check to see if we are empty before adding ourselves to the dead roots list. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:30:23 UTC
f3b15cc Josef Bacik 22 July 2013, 16:54:30 UTC Btrfs: release both paths before logging dir/changed extents The ceph guys tripped over this bug where we were still holding onto the original path that we used to copy the inode with when logging. This is based on Chris's fix which was reported to fix the problem. We need to drop the paths in two cases anyway so just move the drop up so that we don't have duplicate code. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:30:16 UTC
ee20a98 Josef Bacik 11 July 2013, 14:34:59 UTC Btrfs: allow splitting of hole em's when dropping extent cache I noticed while running multi-threaded fsync tests that sometimes fsck would complain about an improper gap. This happens because we fail to add a hole extent to the file, which was happening when we'd split a hole EM because btrfs_drop_extent_cache was just discarding the whole em instead of splitting it. So this patch fixes this by allowing us to split a hole em properly, which means that added holes actually get logged properly and we no longer see this fsck error. Thankfully we're tolerant of these sort of problems so a user would not see any adverse effects of this bug, other than fsck complaining. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:30:09 UTC
ed8c491 Josef Bacik 05 July 2013, 18:03:47 UTC Btrfs: make sure the backref walker catches all refs to our extent Because we don't mess with the offset into the extent for compressed we will properly find both extents for this case [extent a][extent b][rest of extent a] but because we already added a ref for the front half we won't add the inode information for the second half. This causes us to leak that memory and not print out the other offset when we do logical-resolve. So fix this by calling ulist_add_merge and then add our eie to the existing entry if there is one. With this patch we get both offsets out of logical-resolve. With this and the other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo set. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:30:03 UTC
8ca15e0 Josef Bacik 05 July 2013, 17:58:19 UTC Btrfs: fix backref walking when we hit a compressed extent If you do btrfs inspect-internal logical-resolve on a compressed extent that has been partly overwritten it won't find anything. This is because we try and match the extent offset we've searched for based on the extent offset in the data extent entry. However this doesn't work for compressed extents because the offsets are for the uncompressed size, not the compressed size. So instead only do this check if we are not compressed, that way we can get an actual entry for the physical offset rather than nothing for compressed. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:29:56 UTC
b76bb70 Josef Bacik 05 July 2013, 17:52:51 UTC Btrfs: do not offset physical if we're compressed xfstest btrfs/276 was freaking out on slower boxes partly because fiemap was offsetting the physical based on the extent offset. This is perfectly fine with uncompressed extents, however the extent offset is into the uncompressed area, not the compressed. So we can return a physical value that isn't at all within the area we have allocated on disk. Fix this by returning the start of the extent if it is compressed no matter what the offset. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:29:50 UTC
b5b9b5b Liu Bo 03 July 2013, 06:40:44 UTC Btrfs: fix extent buffer leak after backref walking commit 47fb091fb787420cd195e66f162737401cce023f(Btrfs: fix unlock after free on rewinded tree blocks) takes an extra increment on the reference of allocated dummy extent buffer, so now we cannot free this dummy one, and end up with extent buffer leak. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:29:42 UTC
e68afa4 Liu Bo 01 July 2013, 14:13:26 UTC Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents For partial extents, snapshot-aware defrag does not work as expected, since a) we use the wrong logical offset to search for parents, which should be disk_bytenr + extent_offset, not just disk_bytenr, b) 'offset' returned by the backref walking just refers to key.offset, not the 'offset' stored in btrfs_extent_data_ref which is (key.offset - extent_offset). The reproducer: $ mkfs.btrfs sda $ mount sda /mnt $ btrfs sub create /mnt/sub $ for i in `seq 5 -1 1`; do dd if=/dev/zero of=/mnt/sub/foo bs=5k count=1 seek=$i conv=notrunc oflag=sync; done $ btrfs sub snap /mnt/sub /mnt/snap1 $ btrfs sub snap /mnt/sub /mnt/snap2 $ sync; btrfs filesystem defrag /mnt/sub/foo; $ umount /mnt $ btrfs-debug-tree sda (Here we can check whether the defrag operation is snapshot-awared. This addresses the above two problems. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:29:17 UTC
7cddc19 Jie Liu 28 June 2013, 05:15:52 UTC btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified Create a small file and fallocate it to a big size with FALLOC_FL_KEEP_SIZE option, then truncate it back to the small size again, the disk free space is not changed back in this case. i.e, total 4 -rw-r--r-- 1 root root 512 Jun 28 11:35 test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt -rw-r--r-- 1 root root 512 Jun 28 11:35 /mnt/test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt With this fix, the truncated up space is back as: Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> 09 August 2013, 23:28:56 UTC
14e9419 Linus Torvalds 09 August 2013, 22:07:19 UTC Merge tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - ACPI-based memory hotplug stopped working after a recent change, because it's not possible to associate sufficiently many "physical" devices with one ACPI device object due to an artificial limit. Fix from Rafael J Wysocki removes that limit and makes memory hotplug work again. - A change made in 3.9 uncovered a bug in the ACPI processor driver preventing NUMA nodes from being put offline due to an ordering issue. Fix from Yasuaki Ishimatsu changes the ordering to make things work again. - One of the recent ACPI video commits (that hasn't been reverted so far) uncovered a bug in the code handling quirky BIOSes that caused some Asus machines to boot with backlight completely off which made it quite difficult to use them afterward. Fix from Felipe Contreras improves the quirk to cover this particular case correctly. - A cpufreq user space interface change made in 3.10 inadvertently renamed the ignore_nice_load sysfs attribute to ignore_nice which resulted in some confusion. Fix from Viresh Kumar changes the name back to ignore_nice_load. - An initialization ordering change made in 3.9 broke cpufreq on loongson2 boards. Fix from Aaro Koskinen restores the correct initialization ordering there. - Fix breakage resulting from a mistake made in 3.9 and causing the detection of some graphics adapters (that were detected correctly before) to fail. There are two objects representing the same PCIe port in the affected systems' ACPI tables and both appear as "enabled" and we are expected to guess which one to use. We used to choose the right one before by pure luck, but when we tried to address another similar corner case, the luck went away. This time we try to make our guessing a bit more educated which is reported to work on those systems. - The /proc/acpi/wakeup interface code is missing some locking which may lead to breakage if that file is written or read during hotplug of wakeup devices. That should be rare but still possible, so it's better to start using the appropriate locking there. * tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Try harder to resolve _ADR collisions for bridges cpufreq: rename ignore_nice as ignore_nice_load cpufreq: loongson2: fix regression related to clock management ACPI / processor: move try_offline_node() after acpi_unmap_lsapic() ACPI: Drop physical_node_id_bitmap from struct acpi_device ACPI / PM: Walk physical_node_list under physical_node_lock ACPI / video: improve quirk check in acpi_video_bqc_quirk() 09 August 2013, 22:07:19 UTC
fdafa7c Linus Torvalds 09 August 2013, 22:06:17 UTC Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix bug in adt7470 driver which causes it to fail writing fan speed limits" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adt7470) Fix incorrect return code check 09 August 2013, 22:06:17 UTC
79a6fb1 Linus Torvalds 09 August 2013, 22:04:09 UTC Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and a fix for media DocBook" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: fix dependency [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting 09 August 2013, 22:04:09 UTC
21ff019 Byungho An 08 August 2013, 06:30:26 UTC net: stmmac: Fixed the condition of extend_desc for jumbo frame This patch fixed the condition of extend_desc for jumbo frame. There is no check routine for extend_desc in the stmmac_jumbo_frm function. Even though extend_desc is set if dma_tx is used instead of dma_etx. It causes kernel panic. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 20:44:31 UTC
58c59bc Linus Torvalds 09 August 2013, 18:53:06 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: "Revert of a patch which breaks enumeration workaround in hid-logitech-dj" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: hid-logitech-dj: querying_devices was never set" 09 August 2013, 18:53:06 UTC
78ebf0e Linus Torvalds 09 August 2013, 18:52:34 UTC Merge tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix 09 August 2013, 18:52:34 UTC
6a93316 Linus Torvalds 09 August 2013, 18:51:29 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Mostly radeon, more fixes for dynamic power management which is is off by default for this release anyways, but there are a large number of testers, so I'd like to keep merging the fixes. Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915 regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix and one regression fix in the core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm: Don't pass negative delta to ktime_sub_ns() drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale ... 09 August 2013, 18:51:29 UTC
ffbe4a5 Cong Wang 07 August 2013, 08:43:22 UTC vxlan: fix a soft lockup in vxlan module removal This is a regression introduced by: commit fe5c3561e6f0ac7c9546209f01351113c1b77ec8 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Jul 13 10:18:18 2013 -0700 vxlan: add necessary locking on device removal The problem is that vxlan_dellink(), which is called with RTNL lock held, tries to flush the workqueue synchronously, but apparently igmp_join and igmp_leave work need to hold RTNL lock too, therefore we have a soft lockup! As suggested by Stephen, probably the flush_workqueue can just be removed and let the normal refcounting work. The workqueue has a reference to device and socket, therefore the cleanups should work correctly. Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Tested-by: Cong Wang <amwang@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:41:45 UTC
614334d Cong Wang 07 August 2013, 08:35:45 UTC vxlan: fix a regression of igmp join This is a regression introduced by: commit 3fc2de2faba387218bdf9dbc6b13f513ac3b060a Author: stephen hemminger <stephen@networkplumber.org> Date: Thu Jul 18 08:40:15 2013 -0700 vxlan: fix igmp races Before this commit, the old code was: if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) ip_mc_join_group(sk, &mreq); else ip_mc_leave_group(sk, &mreq); therefore we shoud check vxlan_group_used(), not its opposite, for igmp_join. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:41:45 UTC
288a937 Eliezer Tamir 07 August 2013, 08:33:25 UTC net: rename busy poll MIB counter Rename mib counter from "low latency" to "busy poll" v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer) Eric Dumazet suggested that the current location is better. So v2 just renames the counter to fit the new naming convention. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:39:08 UTC
d06f518 Dave Jones 09 August 2013, 18:16:34 UTC 8139cp: Fix skb leak in rx_status_loop failure path. Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96 ("8139cp: Add dma_mapping_error checking") Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:17:03 UTC
e11aada Eric Dumazet 06 August 2013, 11:35:06 UTC net: flow_dissector: add 802.1ad support Same behavior than 802.1q : finds the encapsulated protocol and skip 32bit header. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:06:23 UTC
77a482b Timo Teräs 06 August 2013, 10:45:43 UTC ip_gre: fix ipgre_header to return correct offset Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 August 2013, 18:05:24 UTC
201d3df Oleg Nesterov 09 August 2013, 15:19:13 UTC dlm: kill the unnecessary and wrong device_close()->recalc_sigpending() device_close()->recalc_sigpending() is not needed, sigprocmask() takes care of TIF_SIGPENDING correctly. And without ->siglock it is racy and wrong, it can wrongly clear TIF_SIGPENDING and miss a signal. But even with this patch device_close() is still buggy: 1. sigprocmask() should not be used, we have set_task_blocked(), but this is minor. 2. We should never block SIGKILL or SIGSTOP, and this is what the code tries to do. 3. This can't protect against SIGKILL or SIGSTOP anyway. Another thread can do signal_wake_up(), say, do_signal_stop() or complete_signal() or debugger. 4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears TIF_SIGPENDING, say, freezing() or ->jobctl. 5. device_write() looks equally wrong by the same reason. Looks like, this tries to protect some wait_event_interruptible() logic from signals, it should be turned into uninterruptible wait. Or we need to implement something like signals_stop/start for such a use-case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 August 2013, 17:48:20 UTC
8e5654c Jiri Kosina 09 August 2013, 09:34:19 UTC Revert "HID: hid-logitech-dj: querying_devices was never set" This reverts commit 407a2c2a4d85100c8c67953e4bac2f4a6c942335. Explanation provided by Benjamin Tissoires: Commit "HID: hid-logitech-dj, querying_devices was never set" activate a flag which guarantees that we do not ask the receiver for too many enumeration. When the flag is set, each following enumeration call is discarded (the usb request is not forwarded to the receiver). The flag is then released when the driver receive a pairing information event, which normally follows the enumeration request. However, the USB3 bug makes the driver think the enumeration request has been forwarded to the receiver. However, it is actually not the case because the USB stack returns -EPIPE. So, when a new unknown device appears, the workaround consisting in asking for a new enumeration is not working anymore: this new enumeration is discarded because of the flag, which is never reset. A solution could be to trigger a timeout before releasing it, but for now, let's just revert the patch. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Tested-by: Sune Mølgaard <sune@molgaard.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 09 August 2013, 09:34:19 UTC
28e61cc Michael Neuling 09 August 2013, 07:29:31 UTC powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:07:12 UTC
c2d5264 Michael Neuling 09 August 2013, 07:29:30 UTC powerpc: Save the TAR register earlier This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:07:08 UTC
2517617 Michael Neuling 09 August 2013, 07:29:29 UTC powerpc: Fix context switch DSCR on POWER8 POWER8 allows the DSCR to be accessed directly from userspace via a new SPR number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but like POWER7, is only accessible in HV and OS modes). Currently, we allow this by setting H/FSCR DSCR bit on boot. Unfortunately this doesn't work, as the kernel needs to see the DSCR change so that it knows to no longer restore the system wide version of DSCR on context switch (ie. to set thread.dscr_inherit). This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in facility_unavailable_exception(). We also change _switch() so that we set or clear the H/FSCR DSCR bit based on the thread.dscr_inherit. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:07:05 UTC
74e400c Michael Neuling 09 August 2013, 07:29:28 UTC powerpc: Rework setting up H/FSCR bit definitions This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This is needed for a subsequent patch to fix the userspace DSCR handling. HFSCR and FSCR bit definitions are the same, so reuse them. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:07:01 UTC
88f0941 Michael Neuling 09 August 2013, 07:29:27 UTC powerpc: Fix hypervisor facility unavaliable vector number Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we mark it as an OS facility unavaliable (0xf60) as the two share the same code path. The becomes a problem in facility_unavailable_exception() as we aren't able to see the hypervisor facility unavailable exceptions. Below fixes this by duplication the required macros. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:58 UTC
e0e1361 Thadeu Lima de Souza Cascardo 17 July 2013, 15:10:29 UTC powerpc/kvm/book3s_pr: Return appropriate error when allocation fails err was overwritten by a previous function call, and checked to be 0. If the following page allocation fails, 0 is going to be returned instead of -ENOMEM. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:54 UTC
2fb1067 Chen Gang 22 July 2013, 06:32:35 UTC powerpc/kvm: Add signed type cast for comparation 'rmls' is 'unsigned long', lpcr_rmls() will return negative number when failure occurs, so it need a type cast for comparing. 'lpid' is 'unsigned long', kvmppc_alloc_lpid() return negative number when failure occurs, so it need a type cast for comparing. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:51 UTC
144136d Mike Qiu 07 August 2013, 02:25:14 UTC powerpc/eeh: Add missing procfs entry for PowerNV The procfs entry for global statistics has been missed on PowerNV platform and the patch is going to add that. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:47 UTC
156c9eb Aruna Balakrishnaiah 08 August 2013, 17:04:00 UTC powerpc/pseries: Add backward compatibilty to read old kernel oops-log Older kernels has just length information in their header. Handle it while reading old kernel oops log from pstore. Applies on top of powerpc/pseries: Fix buffer overflow when reading from pstore Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:44 UTC
7e76f34 Aruna Balakrishnaiah 08 August 2013, 17:03:49 UTC powerpc/pseries: Fix buffer overflow when reading from pstore When reading from pstore there is a buffer overflow during decompression due to the header added in unzip_oops. Remove unzip_oops and call pstore_decompress directly in nvram_pstore_read. Allocate buffer of size report_length of the oops header as header will not be deallocated in pstore. Since we have 'openssl' command line tool to decompress the compressed data, dump the compressed data in case decompression fails instead of not dumping anything. Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 09 August 2013, 08:06:40 UTC
4e90a2a Anton Blanchard 31 July 2013, 06:31:26 UTC powerpc: On POWERNV enable PPC_DENORMALISATION by default We want PPC_DENORMALISATION enabled when POWERNV is enabled, so update the Kconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> 09 August 2013, 08:05:29 UTC
6ae6514 Piotr Sarna 09 August 2013, 03:02:24 UTC ext4: fix mount/remount error messages for incompatible mount options Commit 5688978 ("ext4: improve handling of conflicting mount options") introduced incorrect messages shown while choosing wrong mount options. First of all, both cases of incorrect mount options, "data=journal,delalloc" and "data=journal,dioread_nolock" result in the same error message. Secondly, the problem above isn't solved for remount option: the mismatched parameter is simply ignored. Moreover, ext4_msg states that remount with options "data=journal,delalloc" succeeded, which is not true. To fix it up, I added a simple check after parse_options() call to ensure that data=journal and delalloc/dioread_nolock parameters are not present at the same time. Signed-off-by: Piotr Sarna <p.sarna@partner.samsung.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org 09 August 2013, 03:02:24 UTC
59d9fa5 Theodore Ts'o 09 August 2013, 03:01:24 UTC ext4: allow the mount options nodelalloc and data=journal Commit 26092bf ("ext4: use a table-driven handler for mount options") wrongly disallows the specifying the mount options nodelalloc and data=journal simultaneously. This is incorrect; it should have only disallowed the combination of delalloc and data=journal simultaneously. Reported-by: Piotr Sarna <p.sarna@partner.samsung.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org 09 August 2013, 03:01:24 UTC
e42f581 Dave Airlie 08 August 2013, 23:09:37 UTC Merge tag 'drm-intel-fixes-2013-08-08' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: A few bugfixes for serious stuff and regressions. Highlight is the reinstated hack to keep the i915 backlight on when running on an optimus machine, this prevents black screens especially with some radeon muxed platforms. And the patch to quiet dmesg on Linus' old mac mini ;-) * tag 'drm-intel-fixes-2013-08-08' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale drm/i915: update last_vblank when disabling the power well drm/i915: fix gen4 digital port hotplug definitions 08 August 2013, 23:09:37 UTC
75848d3 David S. Miller 08 August 2013, 21:12:10 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for the 3.11 queue... Regarding the mac80211 (and related) bits, Johannes says: "I have a fix from Chris for an infinite loop along with fixes from myself to prevent it entering the loop to start with (continue using disabled channels, many thanks to Chris for his debug/test help) and a workaround for broken APs that advertise a bad HT primary channel in their beacons. Additionally, a fix for another attrbuf race in mac80211 and a fix to clean up properly while P2P GO interfaces go down." Along with that... Solomon Peachy corrects a range check in cw1200 that would lead to a BUG_ON when starting AP mode. Stanislaw Gruszka provides an iwl4965 patch to power-up the device earlier (avoiding microcode errors), and another iwl4965 fix that resets the firmware after turning rfkill off (resolving a bug in the Red Hat Bugzilla). Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 08 August 2013, 21:12:10 UTC
6c2580c Linus Torvalds 08 August 2013, 20:11:53 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 build fix from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: boards/atngw100/mrmt.c: fix building error 08 August 2013, 20:11:53 UTC
8742f22 Oleg Nesterov 08 August 2013, 16:55:32 UTC userns: limit the maximum depth of user_namespace->parent chain Ensure that user_namespace->parent chain can't grow too much. Currently we use the hardroded 32 as limit. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2013, 20:11:39 UTC
93d783b Curt Brune 08 August 2013, 19:11:03 UTC hwmon: (adt7470) Fix incorrect return code check In adt7470_write_word_data(), which writes two bytes using i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed together when they should be OR-ed together. The return code of i2c_smbus_write_byte_data() is zero for success. The upshot is only the first byte was ever written to the hardware. The 2nd byte was never written out. I noticed that trying to set the fan speed limits was not working correctly on my system. Setting the fan speed limits is the only code that uses adt7470_write_word_data(). After making the change the limit settings work and the alarms work also. Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> 08 August 2013, 19:43:07 UTC
1826ff2 John W. Linville 08 August 2013, 17:12:42 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 08 August 2013, 17:12:42 UTC
55f5bfd Linus Torvalds 08 August 2013, 16:38:19 UTC Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o. Misc ext4 fixes, delayed by Ted moving mail servers and email getting marked as spam due to bad spf records. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add WARN_ON to check the length of allocated blocks ext4: fix retry handling in ext4_ext_truncate() ext4: destroy ext4_es_cachep on module unload ext4: make sure group number is bumped after a inode allocation race 08 August 2013, 16:38:19 UTC
64b4aaf Linus Torvalds 08 August 2013, 16:36:38 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fix from James Morris: "Smack casting fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: Smack: IPv6 casting error fix for 3.11 08 August 2013, 16:36:38 UTC
84e4526 Linus Torvalds 08 August 2013, 16:34:40 UTC Merge tag 'regulator-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator DT binding fixes from Mark Brown: "A couple of fixes to bring the DT binding documentation for Palmas into sync with the code" * tag 'regulator-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: palmas-pmic: doc: remove ti,tstep regulator: palmas-pmic: doc: fix typo for sleep-mode 08 August 2013, 16:34:40 UTC
d56290b Linus Torvalds 08 August 2013, 16:34:04 UTC Merge tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Two things here, one is a fix for a nasty issue where we were failing to sync the last register in a block when using raw writes and the other fixes a missing header for the !REGMAP stubs so that we don't rely on implicit includes in that case" * tag 'regmap-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Add missing header for !CONFIG_REGMAP stubs regmap: cache: Make sure to sync the last register in a block 08 August 2013, 16:34:04 UTC
91b831a Linus Torvalds 08 August 2013, 16:33:27 UTC Merge tag 'spi-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "Just one update for SPI, a simple fix to the davinci driver to correct the direction for which DMA is mapped following the dmaengine conversion" * tag 'spi-v3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-davinci: Fix direction in dma_map_single() 08 August 2013, 16:33:27 UTC
bb014db Linus Torvalds 08 August 2013, 16:32:20 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "More virtio console fixes than I'm happy with, but all real issues, and all CC:stable.." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio-scsi: Fix virtqueue affinity setup virtio: console: return -ENODEV on all read operations after unplug virtio: console: fix raising SIGIO after port unplug virtio: console: clean up port data immediately at time of unplug virtio: console: fix race in port_fops_open() and port unplug virtio: console: fix race with port unplug and open/close virtio/console: Add pipe_lock/unlock for splice_write virtio/console: Quit from splice_write if pipe->nrbufs is 0 08 August 2013, 16:32:20 UTC
67ef626 Linus Torvalds 08 August 2013, 16:28:08 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: - MSM: GPIO fixes (includes old code removal) - OMAP: earlyprintk regression, AM33xx cpgmac PM regression - OMAP5: urgent fix for potentially harmful voltage regulator values - Renesas: gpio-keys fix, fix SD card detection, fix shdma calculation error - STi: critical SMP boot fix - tegra: DTS fix for usb-phy - a couple MAINTAINERS updates (Arnd is on paternity leave, Kevin is stepping up to help arm-soc maintenance) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: add TI Keystone ARM platform MAINTAINERS: delete Srinidhi from ux500 ARM: tegra: enable ULPI phy on Colibri T20 ARM: STi: remove sti_secondary_start from INIT section. ARM: STi: Fix cpu nodes with correct device_type. ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board ARM: msm: Consolidate gpiomux for older architectures ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code ARM: msm: dts: Fix the gpio register address for msm8960 08 August 2013, 16:28:08 UTC
3709050 Linus Torvalds 08 August 2013, 16:06:37 UTC Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0" This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423. This commit caused Steven Rostedt's hackbench runs to run out of memory due to a leak. As noted by Joonsoo Kim, it is buggy in the following scenario: "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs, doesn't it? In this case, memory leak is possible in following case. Code flow of possible leak is follwing case. * in __slab_free() 1. (!new.inuse || !prior) && !was_frozen 2. !kmem_cache_debug && !prior 3. new.frozen = 1 4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1 5. with this patch, put_cpu_partial() doesn't do anything, because this cache's cpu_partial is 0 6. return In step 5, leak occur" And Steven does indeed have cpu_partial set to 0 due to RT testing. Joonsoo is cooking up a patch, but everybody agrees that reverting this for now is the right thing to do. Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2013, 16:06:37 UTC
c4afd7b Cong Ding 27 July 2013, 23:07:51 UTC avr32: boards/atngw100/mrmt.c: fix building error there is an additional "{", which causes building error. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> 08 August 2013, 12:16:22 UTC
2ba85e7 Russell King 08 August 2013, 10:51:21 UTC ARM: Fix FIQ code on VIVT CPUs Aaro Koskinen reports the following oops: Installing fiq handler from c001b110, length 0x164 Unable to handle kernel paging request at virtual address ffff1224 pgd = c0004000 [ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a ... [<c0013154>] (set_fiq_handler+0x0/0x6c) from [<c0365d38>] (ams_delta_init_fiq+0xa8/0x160) r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c [<c0365c90>] (ams_delta_init_fiq+0x0/0x160) from [<c0365b14>] (ams_delta_init+0xd4/0x114) r6:00000000 r5:fffece10 r4:c037a9e0 [<c0365a40>] (ams_delta_init+0x0/0x114) from [<c03613b4>] (customize_machine+0x24/0x30) This is because the vectors page is now write-protected, and to change code in there we must write to its original alias. Make that change, and adjust the cache flushing such that the code will become visible to the instruction stream on VIVT CPUs. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 08 August 2013, 11:03:29 UTC
57e6dae Clemens Ladisch 08 August 2013, 09:24:55 UTC ALSA: usb-audio: do not trust too-big wMaxPacketSize values The driver used to assume that the streaming endpoint's wMaxPacketSize value would be an indication of how much data the endpoint expects or sends, and compute the number of packets per URB using this value. However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes, while only about 88 or 44 bytes are be actually used. This discrepancy would result in URBs with far too few packets, which would not work correctly on the EHCI driver. To get correct URBs, use wMaxPacketSize only as an upper limit on the packet size. Reported-by: James Stone <jamesmstone@gmail.com> Tested-by: James Stone <jamesmstone@gmail.com> Cc: <stable@vger.kernel.org> # 2.6.35+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 08 August 2013, 09:37:34 UTC
b72888c Trond Myklebust 08 August 2013, 00:38:07 UTC NFSv4: Fix up nfs4_proc_lookup_mountpoint Currently, we do not check the return value of client = rpc_clone_client(), nor do we shut down the resulting cloned rpc_clnt in the case where a NFS4ERR_WRONGSEC has caused nfs4_proc_lookup_common() to replace the original value of 'client' (causing a memory leak). Fix both issues and simplify the code by moving the call to rpc_clone_client() until after nfs4_proc_lookup_common() has done its business. Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 08 August 2013, 00:47:26 UTC
3e3be27 Hannes Frederic Sowa 07 August 2013, 00:34:31 UTC ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not match In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 August 2013, 00:17:19 UTC
e91abf8 Michel Dänzer 12 June 2013, 09:58:44 UTC drm: Don't pass negative delta to ktime_sub_ns() It takes an unsigned value. This happens not to blow up on 64-bit architectures, but it does on 32-bit, causing drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus timestamps for vblank events. Which in turn causes e.g. gnome-shell to hang after a DPMS off cycle with current xf86-video-ati Git. [airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos] Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836 Tested-by: shui yangwei <yangweix.shui@intel.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 07 August 2013, 23:50:25 UTC
16d5b27 Dave Airlie 07 August 2013, 23:47:02 UTC Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux Some more radeon fixes. Mostly dpm and uvd fixes. Fixes hangs with dpm on more rv6xx asics, and fixes suspend and resume with UVD. * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset 07 August 2013, 23:47:02 UTC
8a53fa2 Alex Deucher 07 August 2013, 20:09:08 UTC drm/radeon: make missing smc ucode non-fatal The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:19 UTC
761bfb9 Alex Deucher 06 August 2013, 17:34:00 UTC drm/radeon/dpm: require rlc for dpm The rlc is required for dpm to work properly, so if the rlc ucode is missing, don't enable dpm. Enabling dpm without the rlc enabled can result in hangs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:19 UTC
f61d5b4 Alex Deucher 06 August 2013, 16:40:16 UTC drm/radeon/cik: use a mutex to properly lock srbm instanced registers We need proper locking in the driver when accessing instanced registers on CIK. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:18 UTC
3744b24 Christian König 05 August 2013, 12:10:58 UTC drm/radeon: remove unnecessary unpin We don't pin the BO on allocation, so don't unpin it on free. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:17 UTC
56cc2c1 Christian König 05 August 2013, 12:10:57 UTC drm/radeon: add more UVD CS checking Improve error handling in case userspace sends us an invalid command buffer. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:16 UTC
641a005 Christian König 05 August 2013, 12:10:56 UTC drm/radeon: stop sending invalid UVD destroy msg We also need to check the handle. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:15 UTC
4ad9c1c Christian König 05 August 2013, 12:10:55 UTC drm/radeon: only save UVD bo when we have open handles Otherwise just reinitialize from scratch on resume, and so make it more likely to succeed. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:15 UTC
6fab3fe Alex Deucher 04 August 2013, 16:13:17 UTC drm/radeon: always program the MC on startup For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 August 2013, 21:37:14 UTC
1518dd8 Alex Deucher 30 July 2013, 21:31:07 UTC drm/radeon: fix audio dto calculation on DCE3+ (v3) Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:13 UTC
ce149a9 Alex Deucher 01 August 2013, 18:35:02 UTC drm/radeon/dpm: disable sclk ss on rv6xx Enabling spread spectrum on the engine clock leads to hangs on some asics. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:12 UTC
2858c00 Christian König 01 August 2013, 15:34:07 UTC drm/radeon: fix halting UVD Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:11 UTC
797f203 Alex Deucher 01 August 2013, 15:54:07 UTC drm/radeon/dpm: adjust power state properly for UVD on SI There are some hardware issue with reclocking on SI when UVD is active, so use a stable power state when UVD is active. Fixes possible hangs and performance issues when using UVD on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:11 UTC
b841ce7 Alex Deucher 31 July 2013, 22:32:33 UTC drm/radeon/dpm: fix spread spectrum setup (v2) Need to check for engine and memory clock ss separately and only enable dynamic ss if either of them are found. This should fix systems which have a ss table, but do not have entries for engine or memory. On those systems we may enable dynamic spread spectrum without enabling it on the engine or memory clocks which can lead to a hang in some cases. fixes some systems reported here: https://bugs.freedesktop.org/show_bug.cgi?id=66963 v2: fix typo Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:10 UTC
fda8372 Alex Deucher 31 July 2013, 16:41:35 UTC drm/radeon/dpm: adjust thermal protection requirements On rv770 and newer, clock gating is not required for thermal protection. The only requirement is that the design utilizes a thermal sensor. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:09 UTC
e1accbf Alex Deucher 29 July 2013, 22:56:13 UTC drm/radeon: select audio dto based on encoder id for DCE3 There are two audio dtos on radeon asics that you can select between. Normally, dto0 is used for hdmi and dto1 for DP, but it seems that the dto is somehow tied to the encoders on DCE3 asics. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67435 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 August 2013, 21:37:08 UTC
95f5950 Alex Deucher 31 July 2013, 13:16:42 UTC drm/radeon: properly handle pm on gpu reset When we reset the GPU, we need to properly tear down power management before reseting the GPU and then set it back up again after reset. Add the missing radeon_pm_[suspend|resume] calls to the gpu reset function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 August 2013, 21:37:07 UTC
eddffa4 Trond Myklebust 07 August 2013, 16:17:19 UTC NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget() We only need to call it on the creation of the inode. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Steve Dickson <SteveD@redhat.com> Cc: Dave Quigley <dpquigl@davequigley.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 07 August 2013, 21:07:41 UTC
e890db0 Scott Mayhew 31 July 2013, 14:01:41 UTC NFSv4: Fix the sync mount option for nfs4 mounts The sync mount option stopped working for NFSv4 mounts after commit c02d7adf8c5429727a98bad1d039bccad4c61c50 (NFSv4: Replace nfs4_path_walk() with FS path lookup in a private namespace). If MS_SYNCHRONOUS is set in the super_block that we're cloning from, then it should be set in the new super_block as well. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> 07 August 2013, 21:07:41 UTC
back to top