Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 09:02:56 UTC
sort by:
Revision Author Date Message Commit Date
94b9a70 Dan Carpenter 07 June 2019, 13:57:09 UTC usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem() The devm_memremap() function doesn't return NULL, it returns error pointers. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 July 2019, 08:40:02 UTC
d74ffae Yoshihiro Shimoda 22 July 2019, 10:58:25 UTC usb-storage: Add a limitation for blk_queue_max_hw_sectors() This patch fixes an issue that the following error happens on swiotlb environment: xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots) On the kernel v5.1, block settings of a usb-storage with SuperSpeed were the following so that the block layer will allocate buffers up to 64 KiB, and then the issue didn't happen. max_segment_size = 65536 max_hw_sectors_kb = 1024 After the commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") is applied, the block settings are the following. So, the block layer will allocate buffers up to 1024 KiB, and then the issue happens: max_segment_size = 4294967295 max_hw_sectors_kb = 1024 To fix the issue, the usb-storage driver checks the maximum size of a mapping for the device and then adjusts the max_hw_sectors_kb if required. After this patch is applied, the block settings will be the following, and then the issue doesn't happen. max_segment_size = 4294967295 max_hw_sectors_kb = 256 Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 July 2019, 08:40:02 UTC
4fbb8aa Ryan Kennedy 04 July 2019, 15:35:29 UTC usb: pci-quirks: Minor cleanup for AMD PLL quirk usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-3-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 July 2019, 08:40:02 UTC
f3dccda Ryan Kennedy 04 July 2019, 15:35:28 UTC usb: pci-quirks: Correct AMD PLL quirk detection The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 25 July 2019, 08:40:02 UTC
3f88094 Hui Wang 25 July 2019, 06:57:37 UTC ALSA: hda - Add a conexant codec entry to let mute led work This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 25 July 2019, 07:12:40 UTC
882a0db Peter Zijlstra 24 July 2019, 22:47:26 UTC objtool: Improve UACCESS coverage A clang build reported an (obvious) double CLAC while a GCC build did not; it turns out that objtool only re-visits instructions if the first visit was with AC=0. If OTOH the first visit was with AC=1, it completely ignores any subsequent visit, even when it has AC=0. Fix this by using a visited mask instead of a boolean, and (explicitly) mark the AC state. $ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xea: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0xffffffffffffffff: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xd9: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xb2: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x39: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x0: <=== (func) Reported-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com 25 July 2019, 06:36:39 UTC
2756d91 Takashi Iwai 19 July 2019, 08:27:54 UTC ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips It turned out that the recent Intel HD-audio controller chips show a significant stall during the system PM resume intermittently. It doesn't happen so often and usually it may read back successfully after one or more seconds, but in some rare worst cases the driver went into fallback mode. After trial-and-error, we found out that the communication stall seems covered by issuing the sync after each verb write, as already done for AMD and other chipsets. So this patch enables the write-sync flag for the recent Intel chips, Skylake and onward, as a workaround. Also, since Broxton and co have the very same driver flags as Skylake, refer to the Skylake driver flags instead of defining the same contents again for simplification. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 24 July 2019, 22:00:21 UTC
50ce73c Talel Shenhar 11 July 2019, 06:38:59 UTC dt-bindings: interrupt-controller: al-fic: remove redundant binding Remove dt binding description for standard binding. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Rob Herring <robh@kernel.org> 24 July 2019, 20:36:16 UTC
aecea57 Masanari Iida 23 July 2019, 03:24:45 UTC ktest: Fix some typos in config-bisect.pl This patch fixes some spelling typos in config-bisect.pl Link: http://lkml.kernel.org/r/20190723032445.14220-1-standby24x7@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 24 July 2019, 19:37:18 UTC
d7852fb Linus Torvalds 11 July 2019, 16:54:40 UTC access: avoid the RCU grace period for the temporary subjective credentials It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 July 2019, 17:12:09 UTC
bed38c3 Linus Torvalds 24 July 2019, 16:58:39 UTC Merge tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "An assortment of non-regression fixes that have accumulated since the start of the merge window. - A fix for a user triggerable oops on machines where transactional memory is disabled, eg. Power9 bare metal, Power8 with TM disabled on the command line, or all Power7 or earlier machines. - Three fixes for handling of PMU and power saving registers when running nested KVM on Power9. - Two fixes for bugs found while stress testing the XIVE interrupt controller code, also on Power9. - A fix to allow guests to boot under Qemu/KVM on Power9 using the the Hash MMU with >= 1TB of memory. - Two fixes for bugs in the recent DMA cleanup, one of which could lead to checkstops. - And finally three fixes for the PAPR SCM nvdimm driver. Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater, Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling, Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar Singh, Vaibhav Jain" * tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL powerpc/pseries: Update SCM hcall op-codes in hvcall.h powerpc/tm: Fix oops on sigreturn on systems without TM powerpc/dma: Fix invalid DMA mmap behavior KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask() powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting powerpc/mm: Limit rma_size to 1TB when running without HV mode 24 July 2019, 16:58:39 UTC
7626077 Linus Torvalds 24 July 2019, 16:46:13 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Bugfixes, a pvspinlock optimization, and documentation moving" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption Documentation: move Documentation/virtual to Documentation/virt KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free KVM: X86: Dynamically allocate user_fpu KVM: X86: Fix fpu state crash in kvm guest Revert "kvm: x86: Use task structs fpu field for user" KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested 24 July 2019, 16:46:13 UTC
c262687 Linus Torvalds 24 July 2019, 16:28:55 UTC Merge tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping regression fix from Christoph Hellwig: "Ensure that dma_addressing_limited doesn't crash on devices without a dma mask (Eric Auger)" * tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: use dma_get_mask in dma_addressing_limited 24 July 2019, 16:28:55 UTC
acbc372 Ondrej Mosnacek 23 July 2019, 06:50:59 UTC selinux: check sidtab limit before adding a new entry We need to error out when trying to add an entry above SIDTAB_MAX in sidtab_reverse_lookup() to avoid overflow on the odd chance that this happens. Cc: stable@vger.kernel.org Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com> 24 July 2019, 15:13:34 UTC
c7842d1 Rob Herring 23 July 2019, 23:03:44 UTC dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id The path in the schema '$id' value is wrong. Fix it. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-clk@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> 24 July 2019, 14:45:52 UTC
266e85a Wanpeng Li 24 July 2019, 09:43:13 UTC KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks) introduces hybrid PV queued/unfair locks - queued mode (no starvation) - unfair mode (good performance on not heavily contended lock) The lock waiter goes into the unfair mode especially in VMs with over-commit vCPUs since increaing over-commitment increase the likehood that the queue head vCPU may have been preempted and not actively spinning. However, reschedule queue head vCPU timely to acquire the lock still can get better performance than just depending on lock stealing in over-subscribe scenario. Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 23520 25040 6% 2VM 8000 13600 70% 3VM 3100 5400 74% The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue head vCPU which is involuntary preemption or the one which is voluntary halt due to fail to acquire the lock after a short spin in the guest. Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 July 2019, 11:56:53 UTC
b8f7095 Matt Mullins 24 July 2019, 04:20:58 UTC x86/entry/32: Pass cr2 to do_async_page_fault() Commit a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") added the address parameter to do_async_page_fault(), but does not pass it from the 32-bit entry point. To plumb it through, factor-out common_exception_read_cr2 in the same fashion as common_exception, and uses it from both page_fault and async_page_fault. For a 32-bit KVM guest, this fixes: Run /sbin/init as init process Starting init: /sbin/init exists but couldn't execute it (error -14) Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") Signed-off-by: Matt Mullins <mmullins@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com 24 July 2019, 10:17:39 UTC
3d13970 YueHaibing 08 July 2019, 07:13:56 UTC fpga-manager: altera-ps-spi: Fix build error If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2019, 09:29:41 UTC
1be8624 Alexander Usyskin 12 July 2019, 09:58:14 UTC mei: me: add mule creek canyon (EHL) device ids Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2019, 09:28:09 UTC
49ed969 Hridya Valsaraju 15 July 2019, 19:18:04 UTC binder: prevent transactions to context manager from its own process. Currently, a transaction to context manager from its own process is prevented by checking if its binder_proc struct is the same as that of the sender. However, this would not catch cases where the process opens the binder device again and uses the new fd to send a transaction to the context manager. Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com Signed-off-by: Hridya Valsaraju <hridya@google.com> Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2019, 09:02:28 UTC
a565870 Martijn Coenen 09 July 2019, 11:09:23 UTC binder: Set end of SG buffer area properly. In case the target node requests a security context, the extra_buffers_size is increased with the size of the security context. But, that size is not available for use by regular scatter-gather buffers; make sure the ending of that buffer is marked correctly. Acked-by: Todd Kjos <tkjos@google.com> Fixes: ec74136ded79 ("binder: create node flag to request sender's security context") Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable@vger.kernel.org # 5.1+ Link: https://lore.kernel.org/r/20190709110923.220736-1-maco@android.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 24 July 2019, 09:02:10 UTC
2f5947d Christoph Hellwig 24 July 2019, 07:24:49 UTC Documentation: move Documentation/virtual to Documentation/virt Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 July 2019, 08:52:11 UTC
2012299 Hannes Reinecke 12 July 2019, 06:53:47 UTC scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG Retrying immediately after we've received a 'transitioning' sense code is pretty much pointless, we should always use a delay before retrying. So ensure the default delay is applied before retrying. Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:20:02 UTC
5578257 Tyrel Datwyler 17 July 2019, 19:48:27 UTC scsi: ibmvfc: fix WARN_ON during event pool release While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:18:14 UTC
5523ca8 Christophe JAILLET 21 July 2019, 12:50:39 UTC scsi: fcoe: fix a typo #define relative to FCOE CTLR start with FCOE_CTLR, except FCOE_CTRL_SOL_TOV. This is likely a typo and CTRL should be CTLR here as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:14:06 UTC
e45ab43 YueHaibing 23 July 2019, 14:34:50 UTC scsi: megaraid_sas: Make some functions static Fix sparse warnings: drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:14:06 UTC
3b5f307 Junxiao Bi 22 July 2019, 16:15:24 UTC scsi: megaraid_sas: fix panic on loading firmware crashdump While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:14:06 UTC
359603a Colin Ian King 20 July 2019, 21:58:40 UTC scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas" Fix spelling mistake in kernel warning message and replace printk with with pr_warn. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 24 July 2019, 02:13:33 UTC
ad5e427 Linus Torvalds 23 July 2019, 22:34:59 UTC Merge branch 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix build issues when kprobes are enabled - Speed up ITLB/DTLB cache flushes when running on machines with combined TLBs * 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines parisc: add kprobe_fault_handler() 23 July 2019, 22:34:59 UTC
4990205 Ingo Molnar 23 July 2019, 21:41:33 UTC Merge tag 'perf-urgent-for-mingo-5.3-20190723' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf.data: Alexey Budankov: - Fix loading of compressed data split across adjacent records Jiri Olsa: - Fix buffer size setting for processing CPU topology perf.data header. perf stat: Jiri Olsa: - Fix segfault for event group in repeat mode Cong Wang: - Always separate "stalled cycles per insn" line, it was being appended to the "instructions" line. perf script: Andi Kleen: - Fix --max-blocks man page description. - Improve man page description of metrics. - Fix off by one in brstackinsn IPC computation. perf probe: Arnaldo Carvalho de Melo: - Avoid calling freeing routine multiple times for same pointer. perf build: - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings treated as errors, breaking the build. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 23 July 2019, 21:41:33 UTC
92e6475 Nicholas Kazlauskas 03 July 2019, 14:02:39 UTC drm/amd/display: Set enabled to false at start of audio disable [Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 23 July 2019, 20:27:09 UTC
7bd9d46 Olof Johansson 23 July 2019, 17:13:23 UTC Merge tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.3: - Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration. - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation. - Fix typo of clock frequency property name in a few i.MX6UL board I2C buses. - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible with i.MX6SX SAI. * tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: fix SAI compatible arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 ARM: dts: imx6ul: fix clock frequency property name of I2C buses ARM: dts: imx7ulp: Fix usb-phy unit address format Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon Signed-off-by: Olof Johansson <olof@lixom.net> 23 July 2019, 17:13:24 UTC
02a0242 Linus Walleij 23 July 2019, 08:15:23 UTC ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 23 July 2019, 17:13:13 UTC
14d017b Linus Walleij 23 July 2019, 08:15:22 UTC ARM: defconfig: u8500: Refresh defconfig This refreshes the outdated U8500 defconfig: some options moved around, PS/2 mouse is no longer default on, crypto options moved around etc. Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 23 July 2019, 17:13:09 UTC
3a9d256 Arnd Bergmann 22 July 2019, 14:55:52 UTC ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux The mdio-bus-mux has no #address-cells/#size-cells property, which causes a few dtc warnings: arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value Add the normal cell numbers. Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 23 July 2019, 17:12:55 UTC
d64b212 Arnd Bergmann 22 July 2019, 14:51:50 UTC ARM: davinci: fix sleep.S build error on ARMv4 When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 23 July 2019, 17:12:53 UTC
8fe34be yangerkun 23 July 2019, 03:23:13 UTC Revert "nvme-pci: don't create a read hctx mapping without read queues" This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 23 July 2019, 15:47:02 UTC
66b20ac Marta Rybczynska 23 July 2019, 05:41:20 UTC nvme: fix multipath crash when ANA is deactivated Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de> 23 July 2019, 15:46:57 UTC
e654dfd Logan Gunthorpe 18 July 2019, 23:53:50 UTC nvme: fix memory leak caused by incorrect subsystem free When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 23 July 2019, 15:46:43 UTC
08b903b Misha Nasledov 15 July 2019, 07:11:49 UTC nvme: ignore subnqn for ADATA SX6000LNP The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 23 July 2019, 15:46:43 UTC
0653275 Eric Auger 22 July 2019, 16:51:49 UTC dma-mapping: use dma_get_mask in dma_addressing_limited We currently have cases where the dma_addressing_limited() gets called with dma_mask unset. This causes a NULL pointer dereference. Use dma_get_mask() accessor to prevent the crash. Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 23 July 2019, 15:43:58 UTC
6692981 Suthikulpanit, Suravee 16 July 2019, 04:29:16 UTC iommu/amd: Add support for X2APIC IOMMU interrupts AMD IOMMU requires IntCapXT registers to be setup in order to generate its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit APIC destination ID. Without this support, AMD IOMMU MSI interrupts will not be routed correctly when booting the system in X2APIC mode. Cc: Joerg Roedel <joro@8bytes.org> Fixes: 90fcffd9cf5e ('iommu/amd: Add support for IOMMU XT mode') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 23 July 2019, 15:41:52 UTC
5a46d3f Lorenzo Pieralisi 22 July 2019, 16:25:48 UTC ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id() Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/ Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org> 23 July 2019, 14:45:46 UTC
77ce56e Arnd Bergmann 22 July 2019, 12:26:34 UTC drbd: dynamically allocate shash descriptor Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 July 2019, 13:35:18 UTC
327fe1d Marcos Paulo de Souza 23 July 2019, 03:27:41 UTC block: blk-mq: Remove blk_mq_sched_started_request and started_request blk_mq_sched_completed_request is a function that checks if the elevator related to the request has started_request implemented, but currently, none of the available IO schedulers implement started_request, so remove both. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 July 2019, 13:25:09 UTC
607975b Ding Xiang 23 July 2019, 07:44:41 UTC ALSA: ac97: Fix double free of ac97_codec_device put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus") Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 23 July 2019, 12:16:11 UTC
39e7317 Arnaldo Carvalho de Melo 19 July 2019, 18:34:30 UTC perf build: Do not use -Wshadow on gcc < 4.8 As it is too strict, see https://lkml.org/lkml/2006/11/28/253 and https://gcc.gnu.org/gcc-4.8/changes.html, that takes into account Linus's comments (search for Wshadow) for the reasoning about -Wshadow not being interesting before gcc 4.8. Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190719183417.GQ3624@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:04:54 UTC
d95daf5 Arnaldo Carvalho de Melo 18 July 2019, 14:28:37 UTC perf probe: Avoid calling freeing routine multiple times for same pointer When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:04:41 UTC
df8350e Arnaldo Carvalho de Melo 18 July 2019, 14:22:58 UTC perf probe: Set pev->nargs to zero after freeing pev->args entries So that, when perf_add_probe_events() fails, like in: # perf probe icmp_rcv:64 "type=icmph->type" Failed to find 'icmph' in this function. Error: Failed to add events. Segmentation fault (core dumped) # We don't segfault. clear_perf_probe_event() was zeroing the whole pev, and since the switch to zfree() for the members in the pev, that memset() was removed, which left nargs with its original value, in the above case 1. With the memset the same pev could be passed to clear_perf_probe_event() multiple times, since all it would have would be zeroes, and free() accepts zero, the loop would not happen and we would just memset it again to zeroes. Without it we got that segfault, so zero nargs to keep it like it was, next cset will avoid calling clear_perf_probe_event() for the same pevs in case of failure. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: d8f9da240495 ("perf tools: Use zfree() where applicable") Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:04:25 UTC
872c8ee Alexey Budankov 09 July 2019, 14:48:14 UTC perf session: Fix loading of compressed data split across adjacent records Fix decompression failure found during the loading of compressed trace collected on larger scale systems (>48 cores). The error happened due to lack of decompression space for a mmaped buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records. $ perf report -i bt.16384.data --stats failed to decompress (B): 63869 -> 0 : Destination buffer is too small user stack dump failure Can't parse sample, err = -14 0x2637e436 [0x4080]: failed to process type: 9 Error: failed to process sample $ perf test 71 71: Zstd perf.data compression/decompression : Ok Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:04:03 UTC
146540f Cong Wang 17 May 2019, 22:10:39 UTC perf stat: Always separate stalled cycles per insn The "stalled cycles per insn" is appended to "instructions" when the CPU has this hardware counter directly. We should always make it a separate line, which also aligns to the output when we hit the "if (total && avg)" branch. Before: $ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,, 3396325133,,cycles,64146628546,100.00,, After: $ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 6721924,,instructions,24026790339,100.00,0.22,insn per cycle ,,,,,0.00,stalled cycles per insn 30939953,,cycles,24025512526,100.00,, Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20190517221039.8975-1-xiyou.wangcong@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:03:46 UTC
08ef3af Jiri Olsa 15 July 2019, 14:21:21 UTC perf stat: Fix segfault for event group in repeat mode Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat mode: # perf stat -e '{cycles,instructions}' -r 10 ls It's caused by memory corruption due to not cleaned evsel's id array and index, which needs to be rebuilt in every stat iteration. Currently the ids index grows, while the array (which is also not freed) has the same size. Fixing this by releasing id array and zeroing ids index in perf_evsel__close function. We also need to keep the evsel_list alive for stat record (which is disabled in repeat mode). Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 12:00:05 UTC
79b2fe5 Jiri Olsa 15 July 2019, 14:04:26 UTC perf tools: Fix proper buffer size for feature processing After Song Liu's segfault fix for pipe mode, Arnaldo reported following error: # perf record -o - | perf script 0x514 [0x1ac]: failed to process type: 80 It's caused by wrong buffer size setup in feature processing, which makes cpu topology feature fail, because it's using buffer size to recognize its header version. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode") Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 11:59:49 UTC
dde4e73 Andi Kleen 11 July 2019, 18:19:21 UTC perf script: Fix off by one in brstackinsn IPC computation When we hit the end of a program block, need to count the last instruction too for the IPC computation. This caused large errors for small blocks. % perf script -b ls / > /dev/null Before: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [36] 4.33 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [37] 3.00 IPC After: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [15] 4.67 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [16] 4.00 IPC Suggested-by: Denis Bakhvalov <denis.bakhvalov@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 11:59:37 UTC
7db7218 Andi Kleen 11 July 2019, 18:19:22 UTC perf script: Improve man page description of metrics Clarify that a metric is based on events, not referring to itself. Also some improvements with the sentences. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 11:58:11 UTC
5f8eec3 Andi Kleen 11 July 2019, 18:19:20 UTC perf script: Fix --max-blocks man page description The --max-blocks description was using the old name brstackasm. Use brstackinsn instead. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190711181922.18765-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 23 July 2019, 11:57:54 UTC
3b81799 Charles Keepax 22 July 2019, 09:24:36 UTC ALSA: compress: Be more restrictive about when a drain is allowed Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 23 July 2019, 10:07:48 UTC
a70ab8a Charles Keepax 22 July 2019, 09:24:35 UTC ALSA: compress: Don't allow paritial drain operations on capture streams Partial drain and next track are intended for gapless playback and don't really have an obvious interpretation for a capture stream, so makes sense to not allow those operations on capture streams. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 23 July 2019, 10:07:42 UTC
26c3f15 Charles Keepax 22 July 2019, 09:24:34 UTC ALSA: compress: Prevent bypasses of set_params Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 23 July 2019, 10:07:36 UTC
4475f8c Charles Keepax 22 July 2019, 09:24:33 UTC ALSA: compress: Fix regression on compressed capture streams A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 23 July 2019, 10:07:22 UTC
9779048 Vasily Gorbik 14 July 2019, 18:49:29 UTC s390/kasan: add bitops instrumentation Add KASAN instrumentation of architecture-specific asm implementation of bitops. It also covers s390 specific *_inv functions. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:46:14 UTC
0a5c3c2 Vasily Gorbik 14 July 2019, 18:49:26 UTC s390/bitops: make test functions return bool Make s390/bitops test functions return bool values. That enforces return value range to 0 and 1 and matches with asm-generic/bitops-instrumented.h declarations as well as some other architectures implementations. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:46:03 UTC
5518aed Vasily Gorbik 14 July 2019, 18:49:23 UTC s390: wire up clone3 system call Tested (64-bit and compat mode) using program from http://lkml.kernel.org/r/20190604212930.jaaztvkent32b7d3@brauner.io with the following: return syscall(__NR_clone, flags, 0, pidfd, 0, 0); changed to: return syscall(__NR_clone, 0, flags, pidfd, 0, 0); due to CLONE_BACKWARDS2. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:45:53 UTC
a963609 Heiko Carstens 22 July 2019, 12:16:46 UTC kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test Masahiro Yamada changed the zcrypt.h header file to use __u{16,32,64} instead of uint{16,32,64}_t with ("s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header"). This makes all s390 header files pass - remove zcrypt.h from the blacklist. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:45:46 UTC
061c996 Masahiro Yamada 21 July 2019, 14:20:08 UTC s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, zcrypt.h is excluded from the test coverage. To make it join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/asm/zcrypt.h.s In file included from <command-line>:32:0: ./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’ uint16_t cprb_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’ uint32_t source_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’ uint32_t target_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’ uint32_t ret_code; ^~~~~~~~ ./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’ uint32_t reserved1; ^~~~~~~~ ./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’ uint32_t reserved2; ^~~~~~~~ ./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’ uint32_t payload_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’ uint16_t ap_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’ uint16_t dom_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’ uint16_t targets_num; ^~~~~~~~ ./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’ uint64_t targets; ^~~~~~~~ ./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’ uint64_t weight; ^~~~~~~~ ./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’ uint64_t req_no; ^~~~~~~~ ./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’ uint64_t req_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’ uint64_t req; ^~~~~~~~ ./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’ uint64_t resp_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’ uint64_t resp; ^~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:45:42 UTC
3f4b04e Christophe JAILLET 21 July 2019, 12:33:21 UTC s390/hypfs: fix a typo in the name of a function Everything is about hypfs_..., except 'hpyfs_vm_create_guest()' s/hpy/hyp/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:45:32 UTC
eed3419 Heiko Carstens 23 July 2019, 08:44:28 UTC Merge tag 'vfio-ccw-20190717-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Fixes in vfio-ccw for older and newer issues. 23 July 2019, 08:44:28 UTC
69e9620 Julian Wiedmann 01 July 2019, 12:19:29 UTC s390/qdio: restrict QAOB usage to IQD unicast queues The IQD mcast queue doesn't support QAOB mode, so skip the qdio_enable_async_operation() setup call for this queue. This avoids the allocation of an unneeded QAOB pointer array, and sets up q->use_cq properly so that drivers are prohibited from using QAOBs for mcast traffic. Take this opportunity to streamline the q->use_cq and aob != 0 checks. The path to qdio_siga_output() is straight-forward, we don't need to worry about being called with bad operands. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:44:03 UTC
a6ec414 Julian Wiedmann 11 July 2019, 16:17:36 UTC s390/qdio: add sanity checks to the fast-requeue path If the device driver were to send out a full queue's worth of SBALs, current code would end up discovering the last of those SBALs as PRIMED and erroneously skip the SIGA-w. This immediately stalls the queue. Add a check to not attempt fast-requeue in this case. While at it also make sure that the state of the previous SBAL was successfully extracted before inspecting it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:43:55 UTC
6abe281 Vasily Gorbik 15 July 2019, 13:30:33 UTC s390: enable detection of kernel version from bzImage Extend "parmarea" to include an offset of the version string, which is stored as 8-byte big endian value. To retrieve version string from bzImage reliably, one should check the presence of "S390EP" ascii string at 0x10008 (available since v3.2), then read the version string offset from 0x10428 (which has been 0 since v3.2 up to now). The string is null terminated. Could be retrieved with the following "file" command magic (requires file v5.34): 8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390 >0x10008 string S390EP >>0x10428 bequad >0 >>>(0x10428.Q) string >\0 \b, version %s Reported-by: Petr Tesarik <ptesarik@suse.com> Suggested-by: Petr Tesarik <ptesarik@suse.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 23 July 2019, 08:43:50 UTC
333a210 Takashi Iwai 23 July 2019, 08:11:59 UTC firmware: Fix missing inline I mistakenly dropped the inline while resolving the patch conflicts in the previous fix patch. Without inline, we get compiler warnings wrt unused functions. Note that Mauro's original patch contained the correct changes; it's all my fault to submit a patch before a morning coffee. Fixes: c8917b8ff09e ("firmware: fix build errors in paged buffer handling code") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190723081159.22624-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 23 July 2019, 08:20:25 UTC
201c1db Joerg Roedel 23 July 2019, 07:51:00 UTC iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA The stub function for !CONFIG_IOMMU_IOVA needs to be 'static inline'. Fixes: effa467870c76 ('iommu/vt-d: Don't queue_iova() if there is no flush queue') Signed-off-by: Joerg Roedel <jroedel@suse.de> 23 July 2019, 07:51:00 UTC
e0a1244 Wen Yang 17 July 2019, 03:55:04 UTC cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init() The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 July 2019, 07:49:10 UTC
8d01484 Lucas Stach 17 July 2019, 09:54:36 UTC arm64: dts: imx8mq: fix SAI compatible The i.MX8M SAI block is not compatible with the i.MX6SX one, as the register layout has changed due to two version registers being added at the beginning of the address map. Remove the bogus compatible. Fixes: 8c61538dc945 ("arm64: dts: imx8mq: Add SAI2 node") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> 23 July 2019, 07:37:31 UTC
c528ade Rafael J. Wysocki 22 July 2019, 10:22:57 UTC int340X/processor_thermal_device: Fix proc_thermal_rapl_remove() Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in __cpuhp_remove_state_cpuslocked() and the argument passed to powercap_unregister_control_type() is expected to be a valid pointer, so avoid calling these functions with incorrect arguments from proc_thermal_rapl_remove(). Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> 23 July 2019, 07:36:07 UTC
52d0901 Anson Huang 16 July 2019, 03:09:33 UTC arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 According to i.MX8MM reference manual Rev.1, 03/2019: SAI3_RXC pin's mux option #1 should be GPT1_CLK, NOT GPT1_CAPTURE2; SAI3_TXFS pin's mux option #1 should be GPT1_CAPTURE2, NOT GPT1_CLK. Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> 23 July 2019, 06:33:40 UTC
1b5d9a6 Christoph Hellwig 22 July 2019, 09:20:38 UTC scsi: core: fix the dma_max_mapping_size call We should only call dma_max_mapping_size for devices that have a DMA mask set, otherwise we can run into a NULL pointer dereference that will crash the system. Also we need to do right shift to get the sectors from the size in bytes, not a left shift. Fixes: bdd17bdef7d8 ("scsi: core: take the DMA max mapping size into account") Reported-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 23 July 2019, 02:05:48 UTC
e70bdd8 Arnd Bergmann 22 July 2019, 12:19:08 UTC scsi: fdomain: fix building pcmcia front-end We get a warning when CONFIG_SCSI_LOWLEVEL is disabled here: WARNING: unmet direct dependencies detected for SCSI_FDOMAIN Depends on [n]: SCSI_LOWLEVEL [=n] && SCSI [=y] Selected by [m]: - PCMCIA_FDOMAIN [=m] && SCSI_LOWLEVEL_PCMCIA [=y] && SCSI [=y] && PCMCIA [=y] && m && MODULES [=y] Move all of SCSI_LOWLEVEL_PCMCIA inside of the existing SCSI_LOWLEVEL section. Very few people use the PCMCIA support these days, and they likely don't mind having to turn on SCSI_LOWLEVEL as well. This way we avoid the link error and get a more sensible structure. Fixes: 7d47fa065e62 ("scsi: fdomain: Add PCMCIA support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 23 July 2019, 02:05:48 UTC
26091ee Yash Shah 19 July 2019, 11:10:31 UTC riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Cc: Andrew Lunn <andrew@lunn.ch> [paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's suggestion] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 22 July 2019, 21:49:31 UTC
985eaf9 Varun Prakash 17 June 2019, 13:17:45 UTC scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector IEEE_8021QAZ_APP_SEL_STREAM is a valid selector for iSCSI connections, so add code to use IEEE_8021QAZ_APP_SEL_STREAM selector to get priority mask. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 22 July 2019, 21:04:20 UTC
2b607f7 Federico Vaga 12 July 2019, 09:48:22 UTC doc:it_IT: translations in process/ This patch add translations for: - programming-languages - kernel-docs (It is better to not translate this since English is a requirement to get something useful out of it) Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 22 July 2019, 20:47:02 UTC
74af0d0 Jeremy Cline 16 July 2019, 14:49:08 UTC docs/vm: transhuge: fix typo in madvise reference Fix an off-by-one typo in the transparent huge pages admin documentation. Signed-off-by: Jeremy Cline <jcline@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 22 July 2019, 20:45:12 UTC
1bcff32 Alex Deucher 18 July 2019, 20:25:04 UTC drm/amdgpu/smu: move fan rpm query into the asic specific code On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 22 July 2019, 20:25:32 UTC
b840e4d Kevin Wang 19 July 2019, 03:39:21 UTC drm/amd/powerplay: custom peak clock freq for navi10 v2: add function smu_default_set_performance_level as default dpm level handler. change function name smu_set_performance_level to smu_asic_set_performance_level v1: 1.NAVI10_PEAK_SCLK_XTX 1830 Mhz 2.NAVI10_PEAK_SCLK_XT 1755 Mhz 3.NAVI10_PEAK_SCLK_XL 1625 Mhz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 22 July 2019, 20:23:07 UTC
251a448 Wesley Terpstra 20 May 2019, 17:29:26 UTC riscv: include generic support for MSI irqdomains Some RISC-V systems include PCIe host controllers that support PCIe message-signaled interrupts. For this to work on Linux, we need to enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support for the latter is enabled by including the architecture-generic msi.h include. Signed-off-by: Wesley Terpstra <wesley@sifive.com> [paul.walmsley@sifive.com: split initial patch into one arch/riscv patch and one drivers/pci patch] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 22 July 2019, 20:06:07 UTC
bbb6fc4 Qian Cai 22 July 2019, 19:14:46 UTC drm: silence variable 'conn' set but not used The "struct drm_connector" iteration cursor from "for_each_new_connector_in_state" is never used in atomic_remove_fb() which generates a compilation warning, drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb': drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set but not used [-Wunused-but-set-variable] Silence it by marking "conn" __maybe_unused. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1563822886-13570-1-git-send-email-cai@lca.pw 22 July 2019, 20:04:53 UTC
f4da5d0 Palmer Dabbelt 28 June 2019, 00:27:53 UTC MAINTAINERS: Add Paul as a RISC-V maintainer The RISC-V port has grown significantly over the past year. Paul's been helping out for a while ago. We agreed in person that he'd take over collecting the patches and submitting the PRs, but it looks like I forgot to make it official. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 22 July 2019, 20:03:57 UTC
48ffc3d Jonathan Corbet 22 July 2019, 19:51:20 UTC Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental into mauro Bring in a set of post-thrashup fixes from Mauro. 22 July 2019, 19:51:20 UTC
143134b Federico Vaga 18 July 2019, 07:47:54 UTC doc:it_IT: rephrase statement The statement sounds more like a literal translation Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 22 July 2019, 19:44:31 UTC
5adcce3 Federico Vaga 18 July 2019, 07:47:24 UTC doc:it_IT: align translation to mainline The patch translates the following patches in Italian: d9d7c0c497b8 docs: Note that :c:func: should no longer be used 83e8b971f81c sphinx.rst: Add note about code snippets embedded in the text cca5e0b8a430 Documentation: PGP: update for newer HW devices Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 22 July 2019, 19:44:17 UTC
e27a242 Jonathan Corbet 22 July 2019, 19:42:10 UTC Merge tag 'v5.3-rc1' into docs-next Pull in all of the massive docs changes from elsewhere. 22 July 2019, 19:42:10 UTC
0036bc7 Rob Clark 30 June 2019, 12:47:22 UTC drm/msm: stop abusing dma_map/unmap for cache Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com 22 July 2019, 18:39:26 UTC
2e7b801 Shubhashree Dhar 24 June 2019, 06:27:12 UTC drm/msm/dpu: Correct dpu encoder spinlock initialization dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of modeset init. Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> [seanpaul resolved conflict in old init removal and revised the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org 22 July 2019, 17:44:17 UTC
7af5cdb Brian Masney 27 June 2019, 02:05:15 UTC drm/msm: correct NULL pointer dereference in context_init Correct attempted NULL pointer dereference in context_init() when running without an IOMMU. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Brian Masney <masneyb@onstation.org> Fixes: 295b22ae596c ("drm/msm: Pass the MMU domain index in struct msm_file_private") Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190627020515.5660-1-masneyb@onstation.org 22 July 2019, 17:40:14 UTC
7b5cf70 Linus Torvalds 22 July 2019, 16:30:34 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y 22 July 2019, 16:30:34 UTC
44b912c Linus Torvalds 22 July 2019, 16:14:19 UTC Merge tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state 22 July 2019, 16:14:19 UTC
21c730d Linus Torvalds 22 July 2019, 16:08:38 UTC Merge tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set 22 July 2019, 16:08:38 UTC
b8d3349 Thomas Gleixner 22 July 2019, 15:59:19 UTC sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 22 July 2019, 16:05:11 UTC
c92f038 Linus Torvalds 22 July 2019, 16:01:47 UTC Merge tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad() 22 July 2019, 16:01:47 UTC
7f6cade Sai Praneeth Prakhya 22 July 2019, 00:22:07 UTC iommu/vt-d: Print pasid table entries MSB to LSB in debugfs Commit dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") prints content of pasid table entries from LSB to MSB where as other entries are printed MSB to LSB. So, to maintain uniformity among all entries and to not confuse the user, print MSB first. Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Fixes: dd5142ca5d24 ("iommu/vt-d: Add debugfs support to show scalable mode DMAR table internals") Signed-off-by: Joerg Roedel <jroedel@suse.de> 22 July 2019, 15:52:57 UTC
back to top