https://github.com/torvalds/linux
- v6.9-rc7
- v6.9-rc6
- v6.9-rc5
- v6.9-rc4
- v6.9-rc3
- v6.9-rc2
- v6.9-rc1
- v6.9
- v6.8-rc7
- v6.8-rc6
- v6.8-rc5
- v6.8-rc4
- v6.8-rc3
- v6.8-rc2
- v6.8-rc1
- v6.8
- v6.7-rc8
- v6.7-rc7
- v6.7-rc6
- v6.7-rc5
- v6.7-rc4
- v6.7-rc3
- v6.7-rc2
- v6.7-rc1
- v6.7
- v6.6-rc7
- v6.6-rc6
- v6.6-rc5
- v6.6-rc4
- v6.6-rc3
- v6.6-rc2
- v6.6-rc1
- v6.6
- v6.5-rc7
- v6.5-rc6
- v6.5-rc5
- v6.5-rc4
- v6.5-rc3
- v6.5-rc2
- v6.5-rc1
- v6.5
- v6.4-rc7
- v6.4-rc6
- v6.4-rc5
- v6.4-rc4
- v6.4-rc3
- v6.4-rc2
- v6.4-rc1
- v6.4
- v6.3-rc7
- v6.3-rc6
- v6.3-rc5
- v6.3-rc4
- v6.3-rc3
- v6.3-rc2
- v6.3-rc1
- v6.3
- v6.2-rc8
- v6.2-rc7
- v6.2-rc6
- v6.2-rc5
- v6.2-rc4
- v6.2-rc3
- v6.2-rc2
- v6.2-rc1
- v6.2
- v6.10-rc7
- v6.10-rc6
- v6.10-rc5
- v6.10-rc4
- v6.10-rc3
- v6.10-rc2
- v6.10-rc1
- v6.1-rc8
- v6.1-rc7
- v6.1-rc6
- v6.1-rc5
- v6.1-rc4
- v6.1-rc3
- v6.1-rc2
- v6.1-rc1
- v6.1
- v6.0-rc7
- v6.0-rc6
- v6.0-rc5
- v6.0-rc4
- v6.0-rc3
- v6.0-rc2
- v6.0-rc1
- v6.0
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.19-rc8
- v5.19-rc7
- v5.19-rc6
- v5.19-rc5
- v5.19-rc4
- v5.19-rc3
- v5.19-rc2
- v5.19-rc1
- v5.19
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.![swh spinner](/static/img/swh-spinner.gif)
Processing "take a new snapshot" request ...
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
427abfa | Linus Torvalds | 18 June 2006, 01:49:35 UTC | Linux v2.6.17 Being named "Crazed Snow-Weasel" instills a lot of confidence in this release, so I'm sure this will be one of the better ones. | 18 June 2006, 01:49:35 UTC |
ce22198 | Arnd Bergmann | 15 June 2006, 13:09:16 UTC | [PATCH] powerpc: enable CPU_FTR_CI_LARGE_PAGE for cell Reflect the fact that the Cell Broadband Engine supports 64k pages by adding the bit to the CPU features. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:56:24 UTC |
19242b2 | Arnd Bergmann | 15 June 2006, 11:15:44 UTC | [PATCH] powerpc: Fix 64k pages on non-partitioned machines The page size encoding passed to tlbie is incorrect for new-style large pages. This fixes it. This doesn't affect anything on older machines because mmu_psize_defs[psize].penc (the page size encoding) is 0 for 4k and 16M pages (the two are distinguished by a separate "is a large page" bit). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:56:24 UTC |
f53ae1d | Oleg Nesterov | 15 June 2006, 16:12:02 UTC | [PATCH] arm_timer: remove a racy and obsolete PF_EXITING check arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state) in run_posix_cpu_timers(). However, for some reason it does so only for CPUCLOCK_PERTHREAD case (which is imho wrong). Also, this check is not reliable, PF_EXITING could be set on another cpu without any locks/barriers just after the check, so it can't prevent from attaching the timer to the exiting task. The previous patch makes this check unneeded. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:52:13 UTC |
30f1e3d | Oleg Nesterov | 15 June 2006, 16:11:43 UTC | [PATCH] run_posix_cpu_timers: remove a bogus BUG_ON() do_exit() clears ->it_##clock##_expires, but nothing prevents another cpu to attach the timer to exiting process after that. arm_timer() tries to protect against this race, but the check is racy. After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and before do_exit() calls 'schedule() local timer interrupt can find tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu does sys_wait4) interrupted task has ->signal == NULL. At this moment exiting task has no pending cpu timers, they were cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(), so we can just return from irq. John Stultz recently confirmed this bug, see http://marc.theaimsgroup.com/?l=linux-kernel&m=115015841413687 Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:52:13 UTC |
8f17fc2 | Oleg Nesterov | 15 June 2006, 16:11:15 UTC | [PATCH] check_process_timers: fix possible lockup If the local timer interrupt happens just after do_exit() sets PF_EXITING (and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call check_process_timers() with tasklist_lock + ->siglock held and check_process_timers: t = tsk; do { .... do { t = next_thread(t); } while (unlikely(t->flags & PF_EXITING)); } while (t != tsk); the outer loop will never stop. Actually, the window is bigger. Another process can attach the timer after ->it_xxx_expires was cleared (see the next commit) and the 'if (PF_EXITING)' check in arm_timer() is racy (see the one after that). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:52:13 UTC |
88d1136 | Stephen Hemminger | 16 June 2006, 19:10:46 UTC | [PATCH] sky2: netconsole suspend/resume interaction A couple of fixes that should prevent crashes when using netconsole and suspend/resume. First, netconsole poll routine shouldn't run unless the device is up; second, the NAPI poll should be disabled during suspend. This is only an issue on sky2, because it has to have one NAPI poll routine for both ports on dual port boards. Normal drivers use netif_rx_schedule_prep and that checks for netif_running. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:52:12 UTC |
9917215 | Jens Axboe | 16 June 2006, 11:02:29 UTC | [PATCH] Fix missing ret assignment in __bio_map_user() error path If get_user_pages() returns less pages than what we asked for, we jump to out_unmap which will return ERR_PTR(ret). But ret can contain a positive number just smaller than local_nr_pages, so be sure to set it to -EFAULT always. Problem found and diagnosed by Damien Le Moal <damien@sdl.hitachi.co.jp> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:52:12 UTC |
1607042 | Jens Axboe | 16 June 2006, 05:46:37 UTC | [PATCH] fix cdrom open Some time ago the cdrom open routine was changed so that we call the driver's open routine before checking to see if it is read only. However, if we discovered that a read write open was not possible and the open flags required a writable open, we just returned -EROFS without calling the driver's release routine. This seems to work for most cdrom drivers, but breaks the Powerpc iSeries virtual cdrom rather badly. This just inserts the release call in the error path to balance the call to "->open()" done by "open_for_data()". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 17 June 2006, 17:44:26 UTC |
553698f | Jens Axboe | 14 June 2006, 17:11:57 UTC | [PATCH] cfq-iosched: fix crash in do_div() We don't clear the seek stat values in cfq_alloc_io_context(), and if ->seek_mean is unlucky enough to be set to -36 by chance, the first invocation of cfq_update_io_seektime() will oops with a divide by zero in do_div(). Just memset the entire cic instead of filling invididual values independently. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 June 2006, 17:22:16 UTC |
9cedc19 | Kirill Korotaev | 14 June 2006, 13:59:35 UTC | [PATCH] Return error in case flock_lock_file failure If flock_lock_file() failed to allocate flock with locks_alloc_lock() then "error = 0" is returned. Need to return some non-zero. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 June 2006, 15:59:44 UTC |
eb35cf6 | Stephen Hemminger | 13 June 2006, 08:17:31 UTC | [PATCH] sky2: stop/start hardware idle timer on suspend/resume The resume bug was caused not by an early interrupt but because the idle timeout was not being stopped on suspend. Also disable hardware IRQ's on suspend. Will need to revisit this with hotplug? Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 June 2006, 20:16:41 UTC |
8ab8fca | Stephen Hemminger | 13 June 2006, 08:17:30 UTC | [PATCH] sky2: save/restore base hardware irq during suspend/resume The hardware should be fully shut off during suspend, and the base irq mask restored during resume. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 June 2006, 20:16:41 UTC |
26ec43f | Stephen Hemminger | 13 June 2006, 08:17:29 UTC | [PATCH] sky2: fix hotplug detect during poll If the poll routine detects no hardware available, it needs to dequeue it self from the network poll list. Linus didn't understand NAPI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 June 2006, 20:16:41 UTC |
f05267e | Stephen Hemminger | 13 June 2006, 08:17:28 UTC | [PATCH] sky2: don't hard code number of ports It is cleaner, to not loop over both ports if only one exists. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 June 2006, 20:16:41 UTC |
2ccc99b | Stephen Hemminger | 13 June 2006, 08:17:27 UTC | [PATCH] sky2: set_power_state should be void The set power state function is cleaner if it doesn't return anything. The only caller that could fail is in suspend() and it can check the argument there. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 June 2006, 20:16:40 UTC |
5e625b0 | Randy Dunlap | 12 June 2006, 22:13:40 UTC | [PATCH] alpha: generic hweight build fix From: Randy Dunlap <rdunlap@xenotime.net> According to include/asm-alpha/bitops.h, only ALPHA_EV67 has hardware hweight support, so ALPHA_EV6 needs to use GENERIC_HWEIGHT. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ernst Herzberg <earny@net4u.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 June 2006, 22:17:53 UTC |
86bc843 | Sergey Vlasov | 12 June 2006, 20:53:23 UTC | [PATCH] tmpfs: Decrement i_nlink correctly in shmem_rmdir() shmem_rmdir() must undo the increment of i_nlink done in shmem_get_inode() for directories, otherwise at least IN_DELETE_SELF inotify event generation is broken. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 June 2006, 21:29:04 UTC |
cfd95a9 | Robin H. Johnson | 12 June 2006, 20:50:25 UTC | [PATCH] tmpfs: time granularity fix for [acm]time going backwards I noticed a strange behavior in a tmpfs file system the other day, while building packages - occasionally, and seemingly at random, make decided to rebuild a target. However, only on tmpfs. A file would be created, and if checked, it had a sub-second timestamp. However, after an utimes related call where sub-seconds should be set, they were zeroed instead. In the case that a file was created, and utimes(...,NULL) was used on it in the same second, the timestamp on the file moved backwards. After some digging, I found that this was being caused by tmpfs not having a time granularity set, thus inheriting the default 1 second granularity. Hugh adds: yes, we missed tmpfs when the s_time_gran mods went into 2.6.11. Unfortunately, the granularity of CURRENT_TIME, often used in filesystems, does not match the default granularity set by alloc_super. A few more such discrepancies have been found, but this is the most important to fix now. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 June 2006, 20:55:52 UTC |
5f856e8 | Linus Torvalds | 12 June 2006, 20:46:43 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE | 12 June 2006, 20:46:43 UTC |
a3b5960 | Linus Torvalds | 12 June 2006, 20:46:27 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Increment ipInHdrErrors when TTL expires. [TCP]: continued: reno sacked_out count fix [DCCP] Ackvec: fix soft lockup in ackvec handling code | 12 June 2006, 20:46:27 UTC |
37b0d1d | Linus Torvalds | 12 June 2006, 20:45:41 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix Integrator and Versatile interrupt initialisation [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget [ARM] Fix Neponset IRQ handling | 12 June 2006, 20:45:41 UTC |
42d1d52 | Weidong | 12 June 2006, 20:09:59 UTC | [IPV4]: Increment ipInHdrErrors when TTL expires. Signed-off-by: Weidong <weid@nanjing-fnst.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 June 2006, 20:09:59 UTC |
d374c1c | Linus Torvalds | 12 June 2006, 19:53:27 UTC | [sky2] Fix sky2 network driver suspend/resume This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 June 2006, 19:53:27 UTC |
0e838b7 | Linus Torvalds | 12 June 2006, 14:47:04 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] sata_mv: grab host lock inside eng_timeout | 12 June 2006, 14:47:04 UTC |
79320d7 | Aki M Nyrhinen | 12 June 2006, 04:18:56 UTC | [TCP]: continued: reno sacked_out count fix From: Aki M Nyrhinen <anyrhine@cs.helsinki.fi> IMHO the current fix to the problem (in_flight underflow in reno) is incorrect. it treats the symptons but ignores the problem. the problem is timing out packets other than the head packet when we don't have sack. i try to explain (sorry if explaining the obvious). with sack, scanning the retransmit queue for timed out packets is fine because we know which packets in our retransmit queue have been acked by the receiver. without sack, we know only how many packets in our retransmit queue the receiver has acknowledged, but no idea which packets. think of a "typical" slow-start overshoot case, where for example every third packet in a window get lost because a router buffer gets full. with sack, we check for timeouts on those every third packet (as the rest have been sacked). the packet counting works out and if there is no reordering, we'll retransmit exactly the packets that were lost. without sack, however, we check for timeout on every packet and end up retransmitting consecutive packets in the retransmit queue. in our slow-start example, 2/3 of those retransmissions are unnecessary. these unnecessary retransmissions eat the congestion window and evetually prevent fast recovery from continuing, if enough packets were lost. Signed-off-by: David S. Miller <davem@davemloft.net> | 12 June 2006, 04:18:56 UTC |
afec35e | Andrea Bittau | 12 June 2006, 03:58:33 UTC | [DCCP] Ackvec: fix soft lockup in ackvec handling code A soft lockup existed in the handling of ack vector records. Specifically, when a tail of the list of ack vector records was removed, it was possible to end up iterating infinitely on an element of the tail. Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 June 2006, 04:08:03 UTC |
ccefb5f | David S. Miller | 12 June 2006, 04:00:46 UTC | [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE It is already exported by fs/open.c Noticed by Ben Collins. Signed-off-by: David S. Miller <davem@davemloft.net> | 12 June 2006, 04:05:25 UTC |
289a1e9 | Paul Mackerras | 12 June 2006, 02:16:26 UTC | [PATCH] Fix for the PPTP hangs that have been reported People have been reporting that PPP connections over ptys, such as used with PPTP, will hang randomly when transferring large amounts of data, for instance in http://bugzilla.kernel.org/show_bug.cgi?id=6530. I have managed to reproduce the problem, and the patch below fixes the actual cause. The problem is not in fact in ppp_async.c but in n_tty.c. What happens is that when pptp reads from the pty, we call read_chan() in drivers/char/n_tty.c on the master side of the pty. That copies all the characters out of its buffer to userspace and then calls check_unthrottle(), which calls the pty unthrottle routine, which calls tty_wakeup on the slave side, which calls ppp_asynctty_wakeup, which calls tasklet_schedule. So far so good. Since we are in process context, the tasklet runs immediately and calls ppp_async_process(), which calls ppp_async_push, which calls the tty->driver->write function to send some more output. However, tty->driver->write() returns zero, because the master tty->receive_room is still zero. We haven't returned from check_unthrottle() yet, and read_chan() only updates tty->receive_room _after_ calling check_unthrottle. That means that the driver->write call in ppp_async_process() returns 0. That would be fine if we were going to get a subsequent wakeup call, but we aren't (we just had it, and the buffer is now empty). The solution is for n_tty.c to update tty->receive_room _before_ calling the driver unthrottle routine. The patch below does this. With this patch I was able to transfer a 900MB file over a PPTP connection (taking about 25 minutes), whereas without the patch the connection would always stall in under a minute. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 June 2006, 03:40:39 UTC |
2f9719b | Mark Lord | 07 June 2006, 16:53:29 UTC | [PATCH] sata_mv: grab host lock inside eng_timeout Bug fix: mv_eng_timeout() calls mv_err_intr() without first grabbing the host lock, which can lead to all sorts of interesting scenarios. This whole error-handling portion of sata_mv is nasty (and will get fixed for the new EH stuff), but for now this patch will help keep it on life-support. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 June 2006, 03:03:18 UTC |
dc4967e | Linus Torvalds | 11 June 2006, 22:28:04 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] PCI: reverse pci config space restore order [PATCH] PCI: Improve PCI config space writeback [PATCH] PCI: Error handling on PCI device resume [PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled | 11 June 2006, 22:28:04 UTC |
c0bbbc7 | Christoph Lameter | 11 June 2006, 22:22:26 UTC | [PATCH] typo in vmscan.c From: Christoph Lameter <clameter@sgi.com> Looks like a comma was left from the conversion from a struct to an assignment. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 June 2006, 22:27:37 UTC |
8b8c8d2 | Yu, Luming | 25 April 2006, 07:00:34 UTC | [PATCH] PCI: reverse pci config space restore order According to Intel ICH spec, there are several rules that Base Address should be programmed before IOSE (PCICMD register ) enabled. For example ICH7: 12.1.3 SATA : the base address register for the bus master register should be programmed before this bit is set. 11.1.3: PCICMD (USB): The base address register for USB should be programmed before this bit is set. .... To make sure kernel code follow this rule , and prevent unnecessary confusion. I proposal this patch. Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 11 June 2006, 21:02:27 UTC |
04d9c1a | Dave Jones | 19 April 2006, 04:06:51 UTC | [PATCH] PCI: Improve PCI config space writeback At least one laptop blew up on resume from suspend with a black screen due to a lack of this patch. By only writing back config space that is different, we minimise the possibility of accidents like this. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 11 June 2006, 21:02:27 UTC |
8d92bc2 | Jean Delvare | 18 April 2006, 12:49:56 UTC | [PATCH] PCI: Error handling on PCI device resume We currently don't handle errors properly when resuming a PCI device: * In pci_default_resume() we capture the error code returned by pci_enable_device() but don't pass it up to the caller. Introduced by commit 95a629657dbe28e44a312c47815b3dc3f1ce0970 * In pci_resume_device(), the errors possibly returned by the driver's .resume method or by the generic pci_default_resume() function are ignored. This patch fixes both issues. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 11 June 2006, 21:02:27 UTC |
0ce0303 | akpm@osdl.org | 13 May 2006, 15:30:52 UTC | [PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled Fix build error when CONFIG_ACPI not defined Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 11 June 2006, 21:02:27 UTC |
650fb83 | Krzysztof Helt | 11 June 2006, 05:03:43 UTC | [SPARC]: Migration cost tune up in sparc smp. This patch sets the max_cache_size value required to tune up scheduler in SMP systems. Otherwise, the calculated migration_cost is too high and task scheduling may lock up. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 June 2006, 05:03:43 UTC |
9145bcf | David S. Miller | 11 June 2006, 05:02:17 UTC | [SPARC64]: Set appropriate max_cache_size. Signed-off-by: David S. Miller <davem@davemloft.net> | 11 June 2006, 05:02:17 UTC |
1f4d4a7 | Linus Torvalds | 10 June 2006, 18:03:51 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Avoid JBUS errors on some Niagara systems. [FUSION]: Fix mptspi.c build with CONFIG_PM not set. [TG3]: Handle Sun onboard tg3 chips more correctly. [SPARC64]: Dump local cpu registers in sun4v_log_error() | 10 June 2006, 18:03:51 UTC |
938473b | Milton Miller | 10 June 2006, 16:54:16 UTC | [PATCH] powerpc: console_initcall ordering issues From: Milton Miller <miltonm@bga.com> The add_preferred_console call in rtas_console.c was not causing the console to be selected. It turns out that the add_preferred_console was being called after the hvc_console driver was registered. It only works when it is called before the console driver is registered. Reorder hvc_console.o after the hvc_console drivers to allow the selection during console_initcall processing. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 June 2006, 18:02:05 UTC |
57a62fe | Markus Lidel | 10 June 2006, 16:54:14 UTC | [PATCH] I2O: Bugfixes to get I2O working again From: Markus Lidel <Markus.Lidel@shadowconnect.com> - Fixed locking of struct i2o_exec_wait in Executive-OSM - Removed LCT Notify in i2o_exec_probe() which caused freeing memory and accessing freed memory during first enumeration of I2O devices - Added missing locking in i2o_exec_lct_notify() - removed put_device() of I2O controller in i2o_iop_remove() which caused the controller structure get freed to early - Fixed size of mempool in i2o_iop_alloc() - Fixed access to freed memory in i2o_msg_get() See http://bugzilla.kernel.org/show_bug.cgi?id=6561 Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 June 2006, 18:02:05 UTC |
a913f50 | Andrew Morton | 10 June 2006, 16:54:13 UTC | [PATCH] powernow-k8 crash workaround From: Andrew Morton <akpm@osdl.org> Work around the oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=6478. Thanks to Ralf Hildebrandt <ralf.hildebrandt@charite.de> for testing and reporting. Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 June 2006, 18:02:05 UTC |
670bd95 | David Howells | 10 June 2006, 16:54:12 UTC | [PATCH] Further alterations for memory barrier document From: David Howells <dhowells@redhat.com> Apply some alterations to the memory barrier document that I worked out with Paul McKenney of IBM, plus some of the alterations suggested by Alan Stern. The following changes were made: (*) One of the examples given for what can happen with overlapping memory barriers was wrong. (*) The description of general memory barriers said that a general barrier is a combination of a read barrier and a write barrier. This isn't entirely true: it implies both, but is more than a combination of both. (*) The first example in the "SMP Barrier Pairing" section was wrong: the loads around the read barrier need to touch the memory locations in the opposite order to the stores around the write barrier. (*) Added a note to make explicit that the loads should be in reverse order to the stores. (*) Adjusted the diagrams in the "Examples Of Memory Barrier Sequences" section to make them clearer. Added a couple of diagrams to make it more clear as to how it could go wrong without the barrier. (*) Added a section on memory speculation. (*) Dropped any references to memory allocation routines doing memory barriers. They may do sometimes, but it can't be relied on. This may be worthy of further documentation later. (*) Made the fact that a LOCK followed by an UNLOCK should not be considered a full memory barrier more explicit and gave an example. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 June 2006, 18:02:05 UTC |
d90d2c3 | Linus Torvalds | 10 June 2006, 17:59:39 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: Fix cell blade detection [PATCH] powerpc: Fix call to ibm,client-architecture-support powerpc: Fix machine check problem on 32-bit kernels | 10 June 2006, 17:59:39 UTC |
56f1319 | Russell King | 10 June 2006, 11:42:12 UTC | [ARM] Fix Integrator and Versatile interrupt initialisation Both Integrator and Versatile were using set_irq_handler() and enable_irq(), and working around the initialisation of the chained interrupt, instead of the more correct set_irq_chained_handler() function. Fix Integrator and Versatile to use the right function, and remove these work-arounds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 June 2006, 11:42:12 UTC |
46b3049 | David S. Miller | 10 June 2006, 08:06:25 UTC | [SPARC64]: Avoid JBUS errors on some Niagara systems. Doing PCI config space accesses to non-present PCI slots can result in fatal JBUS errors if the PCI config access hypervisor call is performed on cpus other than the boot cpu. PCI config space accesses to present PCI slots works just fine. Recursively traverse the OBP device tree under the PCI controller node and record all present device IDs into a small hash table. Avoid the hypervisor call for any PCI config space access attempt for a device not recorded in the hash table. Signed-off-by: David S. Miller <davem@davemloft.net> | 10 June 2006, 08:06:25 UTC |
c29ca9d | Tom "spot" Callaway | 10 June 2006, 00:01:48 UTC | [FUSION]: Fix mptspi.c build with CONFIG_PM not set. Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 June 2006, 00:01:48 UTC |
f49639e | David S. Miller | 09 June 2006, 18:58:36 UTC | [TG3]: Handle Sun onboard tg3 chips more correctly. Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller <davem@davemloft.net> | 09 June 2006, 19:03:51 UTC |
5224e6c | David S. Miller | 07 June 2006, 00:37:41 UTC | [SPARC64]: Dump local cpu registers in sun4v_log_error() This makes the debugging information more usable. Signed-off-by: David S. Miller <davem@davemloft.net> | 09 June 2006, 19:03:49 UTC |
133dda1 | Arnd Bergmann | 07 June 2006, 02:04:18 UTC | [PATCH] powerpc: Fix cell blade detection The IBM Cell blade firmware might confuse the kernel to think it's a pSeries machine. This fixes it for now. With a bit of luck, the firmware will be updated to avoid that in the future but currently that patch is needed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 09 June 2006, 03:06:00 UTC |
33b7497 | Benjamin Herrenschmidt | 07 June 2006, 02:01:32 UTC | [PATCH] powerpc: Fix call to ibm,client-architecture-support The code in prom_init.c calling the firmware ibm,client-architecture-support method on pSeries has a bug where it fails to properly pass the instance handle of the firmware object when trying to call a method. Result ranges from the call doing nothing to the firmware crashing. (Found by Segher, thanks !) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 09 June 2006, 03:05:51 UTC |
7c85d1f | Paul Mackerras | 09 June 2006, 03:02:59 UTC | powerpc: Fix machine check problem on 32-bit kernels This fixes a bug found by Dave Jones that means that it is possible for userspace to provoke a machine check on 32-bit kernels. This also fixes a couple of other places where I found similar problems by inspection. Signed-off-by: Paul Mackerras <paulus@samba.org> | 09 June 2006, 03:02:59 UTC |
128e6ce | Linus Torvalds | 08 June 2006, 22:16:35 UTC | Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: remove risky prefetch on next_skb->data e1000: fix ethtool test irq alloc as "probe" [PATCH] bcm43xx: add DMA rx poll workaround to DMA4 | 08 June 2006, 22:16:35 UTC |
bafe00c | Martin Schwidefsky | 08 June 2006, 08:36:20 UTC | [PATCH] s390: fix in-user atomic futex operation. From: Martin Schwidefsky <schwidefsky@de.ibm.com> __futex_atomic_op needs to do an atomic operation in the user address space, not the kernel address space. Add the missing sacf 256/sacf 0 to switch to the secondary mode before doing the compare-and-swap. In addition add another fixup for catch specification exceptions if the compare-and-swap address is not aligned. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:15:30 UTC |
71601e2 | Jens Axboe | 08 June 2006, 08:26:39 UTC | [PATCH] debugfs inode leak Looking at the reiser4 crash, I found a leak in debugfs. In debugfs_mknod(), we create the inode before checking if the dentry already has one attached. We don't free it if that is the case. These bugs happen quite often, I'm starting to think we should disallow such coding in CodingStyle. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:14:24 UTC |
bc1c116 | Jens Axboe | 08 June 2006, 06:49:06 UTC | [PATCH] elevator switching race There's a race between shutting down one io scheduler and firing up the next, in which a new io could enter and cause the io scheduler to be invoked with bad or NULL data. To fix this, we need to maintain the queue lock for a bit longer. Unfortunately we cannot do that, since the elevator init requires to be run without the lock held. This isn't easily fixable, without also changing the mempool API. So split the initialization into two parts, and alloc-init operation and an attach operation. Then we can preallocate the io scheduler and related structures, and run the attach inside the lock after we detach the old one. This patch has survived 30 minutes of 1 second io scheduler switching with a very busy io load. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:14:23 UTC |
26e780e | Malcom Parsons | 08 June 2006, 07:43:42 UTC | [PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW mode From: Malcom Parsons <malcolm.parsons@gmail.com> When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll region, the bottom few lines have to be redrawn. Without this patch, the wrong text is drawn into these lines, corrupting the display. Observed in 2.6.14 when running an IRC client in the Nintendo DS linux port. I haven't tested if scrolling down has the same problem. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:12:21 UTC |
45b35a5 | Ralf Baechle | 08 June 2006, 07:43:41 UTC | [PATCH] Fix mempolicy.h build error From: Ralf Baechle <ralf@linux-mips.org> <linux/mempolicy.h> uses struct mm_struct and relies on a definition or declaration somehow magically being dragged in which may result in a build: [...] CC mm/mempolicy.o In file included from mm/mempolicy.c:69: include/linux/mempolicy.h:150: warning: ‘struct mm_struct’ declared inside parameter list include/linux/mempolicy.h:150: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/mempolicy.h:175: warning: ‘struct mm_struct’ declared inside parameter list mm/mempolicy.c:622: error: conflicting types for ‘do_migrate_pages’ include/linux/mempolicy.h:175: error: previous declaration of ‘do_migrate_pages’ was here mm/mempolicy.c:1661: error: conflicting types for ‘mpol_rebind_mm’ include/linux/mempolicy.h:150: error: previous declaration of ‘mpol_rebind_mm’ was here make[1]: *** [mm/mempolicy.o] Error 1 make: *** [mm] Error 2 [ralf@denk linux-ip35]$ Including <linux/sched.h> is a step into direction of include hell so fixed by adding a forward declaration of struct mm_struct instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:12:21 UTC |
fd0a0ac | Lennert Buytenhek | 08 June 2006, 07:43:40 UTC | [PATCH] ep93xx build fix From: Lennert Buytenhek <buytenh@wantstofly.org> The recent renaming of m48t86's ->readb() and ->writeb() platform driver methods (2d7b20c1884777e66009be1a533641c19c4705f6) to ->readbyte() and ->writebyte() to fix the ia64 build broke the build of the cirrus ep93xx ARM platform. This patch fixes it up. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:12:21 UTC |
a2ef3a5 | Andy Currid | 08 June 2006, 07:43:39 UTC | [PATCH] Fix HPET operation on 64-bit NVIDIA platforms From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:12:21 UTC |
d44647b | Andy Currid | 08 June 2006, 07:43:38 UTC | [PATCH] Fix HPET operation on 32-bit NVIDIA platforms From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 June 2006, 22:12:21 UTC |
e2f04e1 | Matt Reimer | 08 June 2006, 21:46:48 UTC | [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX Patch from Matt Reimer There is a subtle bug in the GPIO interrupt status register handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The documentation states that a 1 should be written to the relevant bit to acknowledge a GPIO interrupt, but that is not what the code does. The problem is that the |= writes back 1s for all the *other* interrupts represented in the register, so interrupts could get lost. For example, if interrupts are pending for GPIO B10 and B12, ISR_B would have the value 0x00001400. Then when the interrupt code handles GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which effectively does this: ISR_B |= 1 << 10; with the result that (0x00001400 | 0x00000400) is written, clearing the interrupt status bits for *both* GPIO B10 and B12. The fix is to write 1s only for the interrupts we want to clear. The same problem seems to be occurring in the DMA code; this patch does not address those issues. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 08 June 2006, 21:46:48 UTC |
0c27c5d | Richard Purdie | 08 June 2006, 21:44:07 UTC | [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 08 June 2006, 21:44:07 UTC |
cb15f81 | Jeff Garzik | 08 June 2006, 19:49:36 UTC | Merge branch 'upstream-fixes' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes | 08 June 2006, 19:49:36 UTC |
2e84abe | Jeff Garzik | 08 June 2006, 19:46:27 UTC | Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes | 08 June 2006, 19:46:27 UTC |
d782f33 | Russell King | 08 June 2006, 16:59:31 UTC | [ARM] Fix Neponset IRQ handling While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 08 June 2006, 16:59:31 UTC |
24f476e | Auke Kok | 08 June 2006, 16:28:47 UTC | e1000: remove risky prefetch on next_skb->data It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> | 08 June 2006, 16:28:47 UTC |
b9b6e78 | Auke Kok | 08 June 2006, 16:28:38 UTC | e1000: fix ethtool test irq alloc as "probe" New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> | 08 June 2006, 16:28:38 UTC |
1def630 | Linus Torvalds | 06 June 2006, 00:57:02 UTC | Linux 2.6.17-rc6 | 06 June 2006, 00:57:02 UTC |
ff3ea47 | Linus Torvalds | 05 June 2006, 23:59:46 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: fix locking and memory leak in br_add_bridge [IRDA]: Missing allocation result check in irlap_change_speed(). [PPPOE]: Missing result check in __pppoe_xmit(). [NET]: Eliminate unused /proc/sys/net/ethernet [NETCONSOLE]: Clean up initcall warning. [TCP]: Avoid skb_pull if possible when trimming head | 05 June 2006, 23:59:46 UTC |
3648570 | Jiri Benc | 05 June 2006, 23:39:34 UTC | [BRIDGE]: fix locking and memory leak in br_add_bridge There are several bugs in error handling in br_add_bridge: - when dev_alloc_name fails, allocated net_device is not freed - unregister_netdev is called when rtnl lock is held - free_netdev is called before netdev_run_todo has a chance to be run after unregistering net_device Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 23:39:34 UTC |
a8c7250 | Linus Torvalds | 05 June 2006, 23:23:02 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-serial * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] typo: buad -> baud | 05 June 2006, 23:23:02 UTC |
2f9c3c2 | Linus Torvalds | 05 June 2006, 23:22:43 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-mmc * master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy [MMC] Add maintainers entry for MMC subsystem | 05 June 2006, 23:22:43 UTC |
1b41526 | Linus Torvalds | 05 June 2006, 23:22:26 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3543/1: [Fwd: PXA270 bootparams address not set] [ARM] Trivial typo fixes | 05 June 2006, 23:22:26 UTC |
b1c231f | Chad Reese | 31 May 2006, 00:16:49 UTC | [MIPS] Fix sparsemem support. Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem extreme, this function does an allocate for bootmem. This would always fail since init_bootmem hasn't been called yet. Move memory_present after free_bootmem. This only marks actual memory ranges as present instead of the entire address space. Signed-off-by: Chad Reese <creese@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:20 UTC |
ecf52d3 | Atsushi Nemoto | 31 May 2006, 16:00:03 UTC | [MIPS] Fix compiler warnings (field width, unused variable) Fix following warnings: linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2) linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4) linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len' linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name' linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc' (original patch by Atsushi, slight changes to the setup.c part by me.) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:20 UTC |
460c042 | Atsushi Nemoto | 31 May 2006, 16:00:39 UTC | [MIPS] Fix sparse warnings about too big constants. Fix following warnings: linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:19 UTC |
e32b699 | Ralf Baechle | 30 May 2006, 14:55:05 UTC | [MIPS] Fix 64-bit build for RM7000. RM7000 has 40-bit virtual / 36-bit physical address space. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:19 UTC |
b6d7c7a | Ralf Baechle | 30 May 2006, 01:13:16 UTC | [MIPS] IP32: Fix warnings. The expressions are volatile; no need for temporary variables. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:19 UTC |
7cb710c | Sergei Shtylyov | 27 May 2006, 18:39:39 UTC | [MIPS] Fix non-linear memory mapping on MIPS Fix the non-linear memory mapping done via remap_file_pages() -- it didn't work on any MIPS CPU because the page offset clashing with _PAGE_FILE and some other page protection bits which should have been left zeros for this kind of pages. Signed-off-by: Konstantin Baydarov <kbaidarov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:18 UTC |
aa32374 | Ralf Baechle | 28 May 2006, 23:02:12 UTC | [MIPS] SB1: Only pass1 FPUs are broken beyond recovery. The wrong revision number in the check was forcing a fallback to FPU emulation for all SB1 cores in 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:18 UTC |
7155262 | Thiemo Seufer | 28 May 2006, 14:02:53 UTC | [MIPS] open() forces O_LARGEFILE for o32 on 64bit kernels open() always sets the O_LARGEFILE flag for the o32 ABI implementation of a 64bit kernel. The appended patch fixes it. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:17 UTC |
fef6d6a | Sergei Shtylyov | 27 May 2006, 19:36:41 UTC | [MIPS] Au1xx0: fix prom_getenv() to handle YAMON style environment Alchemy boards use YAMON which passes the environment variables as the tuples of strings (the name followed by the value) unlike PMON which passes "name=<val>" strings. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:17 UTC |
6ebba0e | Sergei Shtylyov | 27 May 2006, 16:43:04 UTC | [MIPS] Fix swap entry for MIPS32 36-bit physical address With 64-bit physical address enabled, 'swapon' was causing kernel oops on Alchemy CPUs (MIPS32) because of the swap entry type field corrupting the _PAGE_FILE bit in 'pte_low' field. So, switch to storing the swap entry in 'pte_high' field using all its bits except _PAGE_GLOBAL and _PAGE_VALID which gives 25 bits for the swap entry offset. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:16 UTC |
79e0bc3 | Sergei Shtylyov | 03 May 2006, 18:56:43 UTC | [MIPS] Fix mprotect() syscall for MIPS32 w/36-bit physical address support Fix mprotect() syscall for MIPS32 CPUs with 36-bit physical address support: pte_modify() macro didn't clear the hardware page protection bits before modifying... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:15 UTC |
9370b35 | Sergei Shtylyov | 26 May 2006, 15:44:54 UTC | [MIPS] Save write-only Config.OD from being clobbered Save the Config.OD bit from being clobbered by coherency_setup(). This bit, when set, fixes various errata in the early steppings of Au1x00 SOCs. Unfortunately, the bit was write-only on the most early of them. In addition, also restore the bit after a wakeup from sleep. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:13 UTC |
cac4bcb | Ralf Baechle | 24 May 2006, 15:51:02 UTC | [MIPS] Print more information if we're struck by a machine check exception. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:13 UTC |
722ace9 | Ralf Baechle | 24 May 2006, 02:04:18 UTC | [MIPS] Fix declaration of smp_prepare_cpus() platform hook. A while ago prom_prepare_cpus was replaced by plat_prepare_cpus but the declaration has stayed unchanged. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:12 UTC |
1acf1ca | Atsushi Nemoto | 23 May 2006, 07:42:38 UTC | [MIPS] Fix modpost warning: Rename op_model_xxx to op_model_xxx_ops. The modpost uses a whitelist for commonly used suffix on checking the section mismatch. Adding "_ops" suffix to op_modex_xxx get rid of this modpost warning. WARNING: arch/mips/oprofile/oprofile.o - Section mismatch: reference to .init.text: from .data after 'op_model_mipsxx' (at offset 0x528) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:11 UTC |
5ee8235 | Ralf Baechle | 23 May 2006, 15:37:32 UTC | [MIPS] Fix instable BogoMIPS on multi-issue processors. Increase alignment of BogoMIPS loop to 8 bytes. Having the delay loop overlap cache line boundaries may cause instable delays. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:10 UTC |
f3bf07b | Atsushi Nemoto | 22 May 2006, 15:45:07 UTC | [MIPS] Ignore unresolved weak symbols in modules. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:10 UTC |
320e6ab | Ralf Baechle | 22 May 2006, 13:24:04 UTC | [MIPS] Fix SMP now that fixup_cpu_present_map is gone. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:09 UTC |
acf518c | Ralf Baechle | 17 May 2006, 23:16:10 UTC | [MIPS] Remove duplicate declaration of cpu_online_map. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 June 2006, 23:15:09 UTC |
8c893ff | Florin Malita | 05 June 2006, 22:34:52 UTC | [IRDA]: Missing allocation result check in irlap_change_speed(). The skb allocation may fail, which can result in a NULL pointer dereference in irlap_queue_xmit(). Coverity CID: 434. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 22:34:52 UTC |
9bc1809 | Florin Malita | 05 June 2006, 22:34:33 UTC | [PPPOE]: Missing result check in __pppoe_xmit(). skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 22:34:33 UTC |
6569a35 | Jes Sorensen | 05 June 2006, 22:34:11 UTC | [NET]: Eliminate unused /proc/sys/net/ethernet The /proc/sys/net/ethernet directory has been sitting empty for more than 10 years! Time to eliminate it! Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 22:34:11 UTC |
92cd6ee | Matt Mackall | 05 June 2006, 22:04:37 UTC | [NETCONSOLE]: Clean up initcall warning. From: Matt Mackall <mpm@selenic.com> netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 22:04:37 UTC |
f291196 | Herbert Xu ~{PmVHI~} | 05 June 2006, 22:03:37 UTC | [TCP]: Avoid skb_pull if possible when trimming head Trimming the head of an skb by calling skb_pull can cause the packet to become unaligned if the length pulled is odd. Since the length is entirely arbitrary for a FIN packet carrying data, this is actually quite common. Unaligned data is not the end of the world, but we should avoid it if it's easily done. In this case it is trivial. Since we're discarding all of the head data it doesn't matter whether we move skb->data forward or back. However, it is still possible to have unaligned skb->data in general. So network drivers should be prepared to handle it instead of crashing. This patch also adds an unlikely marking on len < headlen since partial ACKs on head data are extremely rare in the wild. As the return value of __pskb_trim_head is no longer ever NULL that has been removed. Signed-off-by: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 05 June 2006, 22:03:37 UTC |
364212e | Linus Torvalds | 05 June 2006, 19:30:28 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] pcmcia: fix zeroing of cm4000_cs.c data [PATCH] pcmcia: missing pcmcia_get_socket() result check | 05 June 2006, 19:30:28 UTC |
fec468b | Jeff Dike | 04 June 2006, 09:51:49 UTC | [PATCH] uml: add -ffreestanding to CFLAGS From: Jeff Dike <jdike@addtoit.com> This fixes the undefined reference to strcpy seen when building modules on i386. Tracked down by Al Viro. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 05 June 2006, 19:29:17 UTC |