https://github.com/torvalds/linux
- v6.1-rc6
- v6.1-rc5
- v6.1-rc4
- v6.1-rc3
- v6.1-rc2
- v6.1-rc1
- v6.0-rc7
- v6.0-rc6
- v6.0-rc5
- v6.0-rc4
- v6.0-rc3
- v6.0-rc2
- v6.0-rc1
- v6.0
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.19-rc8
- v5.19-rc7
- v5.19-rc6
- v5.19-rc5
- v5.19-rc4
- v5.19-rc3
- v5.19-rc2
- v5.19-rc1
- v5.19
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.![swh spinner](/static/img/swh-spinner.gif)
Processing "take a new snapshot" request ...
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
31ade3b | Linus Torvalds | 30 November 2015, 02:58:26 UTC | Linux 4.4-rc3 | 30 November 2015, 02:58:26 UTC |
c5bc1c9 | Linus Torvalds | 30 November 2015, 01:38:08 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull nouveau and radeon fixes from Dave Airlie: "Just some nouveau and radeon/amdgpu fixes. The nouveau fixes look large as the firmware context files are regenerated, but the actual change is quite small" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: make some dpm errors debug only drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM drm/radeon: make rv770_set_sw_state failures non-fatal drm/amdgpu: move dependency handling out of atomic section v2 drm/amdgpu: optimize scheduler fence handling drm/amdgpu: remove vm->mutex drm/amdgpu: add mutex for ba_va->valids/invalids drm/amdgpu: adapt vce session create interface changes drm/amdgpu: vce use multiple cache surface starting from stoney drm/amdgpu: reset vce trap interrupt flag | 30 November 2015, 01:38:08 UTC |
818aba3 | Linus Torvalds | 30 November 2015, 01:30:41 UTC | Merge tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Two fixes for the ds1307 alarm and wakeup" * tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix alarm reading at probe time rtc: ds1307: fix kernel splat due to wakeup irq handling | 30 November 2015, 01:30:41 UTC |
00fd6a7 | Linus Torvalds | 30 November 2015, 01:24:35 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fix from Ralf Baechle: "Just a fix for empty loops that may be removed by non-antique GCC" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay loops which may be removed by GCC. | 30 November 2015, 01:24:35 UTC |
d72aee7 | Linus Torvalds | 30 November 2015, 01:18:41 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "Summary: - Add missing initialization of max_pfn, which is needed to make selftests/vm/mlock2-tests succeed, - Wire up new mlock2 syscall" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up mlock2 m68knommu: Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: sun3 - Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: m54xx - Add missing initialization of max_pfn m68k/mm: motorola - Add missing initialization of max_pfn | 30 November 2015, 01:18:41 UTC |
04527fd | Linus Torvalds | 30 November 2015, 01:13:07 UTC | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Just two changes this time around: - wire up the new mlock2 syscall added during the last merge window - fix a build problem with certain configurations provoked by making CONFIG_OF user selectable" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8454/1: OF implies OF_FLATTREE ARM: wire up mlock2 syscall | 30 November 2015, 01:13:07 UTC |
36511e8 | Linus Torvalds | 29 November 2015, 17:03:57 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: - fix tcm-user backend driver expired cmd time processing (agrover) - eliminate kref_put_spinlock_irqsave() for I/O completion (bart) - fix iscsi login kthread failure case hung task regression (nab) - fix COMPARE_AND_WRITE completion use-after-free race (nab) - fix COMPARE_AND_WRITE with SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC non zero SGL offset data corruption. (Jan + Doug) - fix >= v4.4-rc1 regression for tcm_qla2xxx enable configfs attribute (Himanshu + HCH) * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/stat: print full t10_wwn.model buffer target: fix COMPARE_AND_WRITE non zero SGL offset data corruption qla2xxx: Fix regression introduced by target configFS changes kref: Remove kref_put_spinlock_irqsave() target: Invoke release_cmd() callback without holding a spinlock target: Fix race for SCF_COMPARE_AND_WRITE_POST checking iscsi-target: Fix rx_login_comp hang after login failure iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc() target/user: Do not set unused fields in tcmu_ops target/user: Fix time calc in expired cmd processing | 29 November 2015, 17:03:57 UTC |
75a29ec | Linus Torvalds | 29 November 2015, 16:58:48 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "Specifics: - several fixes and cleanups on Rockchip thermal drivers. - add the missing support of RK3368 SoCs in Rockchip driver. - small fixes on of-thermal, power_allocator, rcar driver, IMX, and QCOM drivers, and also compilation fixes, on thermal.h, when thermal is not selected" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: imx: thermal: use CPU temperature grade info for thresholds thermal: fix thermal_zone_bind_cooling_device prototype Revert "thermal: qcom_spmi: allow compile test" thermal: rcar_thermal: remove redundant operation thermal: of-thermal: Reduce log level for message when can't fine thermal zone thermal: power_allocator: Use temperature reading from tz thermal: rockchip: Support the RK3368 SoCs in thermal driver thermal: rockchip: consistently use int for temperatures thermal: rockchip: Add the sort mode for adc value increment or decrement thermal: rockchip: improve the conversion function thermal: rockchip: trivial: fix typo in commit thermal: rockchip: better to compatible the driver for different SoCs dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible | 29 November 2015, 16:58:48 UTC |
8f90353 | David Disseldorp | 27 November 2015, 17:37:47 UTC | target/stat: print full t10_wwn.model buffer Cut 'n paste error saw it only process sizeof(t10_wwn.vendor) characters. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 05:23:13 UTC |
d94e5a6 | Jan Engelhardt | 23 November 2015, 16:46:32 UTC | target: fix COMPARE_AND_WRITE non zero SGL offset data corruption target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by: Jan Engelhardt <jengelh@netitwork.de> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 05:22:56 UTC |
3786dc4 | Himanshu Madhani | 24 November 2015, 17:20:15 UTC | qla2xxx: Fix regression introduced by target configFS changes this patch fixes following regression # targetcli [Errno 13] Permission denied: '/sys/kernel/config/target/qla2xxx/21:00:00:0e:1e:08:c7:20/tpgt_1/enable' Fixes: 2eafd72939fd ("target: use per-attribute show and store methods") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:52:10 UTC |
3a66d7d | Bart Van Assche | 22 October 2015, 23:02:14 UTC | kref: Remove kref_put_spinlock_irqsave() The last user is gone. Hence remove this function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:33:29 UTC |
9ff9d15 | Bart Van Assche | 22 October 2015, 22:57:04 UTC | target: Invoke release_cmd() callback without holding a spinlock This patch fixes the following kernel warning because it avoids that IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp() invokes spin_unlock_bh()): WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110() Call Trace: [<ffffffff814f71eb>] dump_stack+0x4f/0x7b [<ffffffff8105e56a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8105e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81062b2a>] __local_bh_enable_ip+0xaa/0x110 [<ffffffff814ff229>] _raw_spin_unlock_bh+0x39/0x40 [<ffffffffa03a7f94>] fc_seq_set_resp+0xe4/0x100 [libfc] [<ffffffffa02e604a>] ft_free_cmd+0x4a/0x90 [tcm_fc] [<ffffffffa02e6972>] ft_release_cmd+0x12/0x20 [tcm_fc] [<ffffffffa042bd66>] target_release_cmd_kref+0x56/0x90 [target_core_mod] [<ffffffffa042caf0>] target_put_sess_cmd+0xc0/0x110 [target_core_mod] [<ffffffffa042cb81>] transport_release_cmd+0x41/0x70 [target_core_mod] [<ffffffffa042d975>] transport_generic_free_cmd+0x35/0x420 [target_core_mod] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joern Engel <joern@logfs.org> Reviewed-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:33:23 UTC |
057085e | Nicholas Bellinger | 06 November 2015, 07:37:59 UTC | target: Fix race for SCF_COMPARE_AND_WRITE_POST checking This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:33:15 UTC |
ca82c2b | Nicholas Bellinger | 05 November 2015, 22:11:59 UTC | iscsi-target: Fix rx_login_comp hang after login failure This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e54198657b65625085834847ab6271087323ffea Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:33:08 UTC |
82a819e | Luis de Bethencourt | 19 October 2015, 20:18:24 UTC | iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc() Smatch complains about returning hard coded error codes, silence this warning. drivers/target/iscsi/iscsi_target_parameters.c:211 iscsi_create_default_params() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:32:59 UTC |
6ba4bd2 | Andy Grover | 13 November 2015, 18:42:20 UTC | target/user: Do not set unused fields in tcmu_ops TCMU sets TRANSPORT_FLAG_PASSTHROUGH, so INQUIRY commands will not be emulated by LIO but passed up to userspace. Therefore TCMU should not set these, just like pscsi doesn't. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:32:52 UTC |
611e226 | Andy Grover | 13 November 2015, 18:42:19 UTC | target/user: Fix time calc in expired cmd processing Reversed arguments meant that we were doing nothing for cmds whose deadline had passed. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 29 November 2015, 03:32:33 UTC |
aa7d5f1 | Arnd Bergmann | 19 November 2015, 12:20:54 UTC | ARM: 8454/1: OF implies OF_FLATTREE On the ARM architecture, individual platforms select CONFIG_USE_OF if they need it, but all device tree code is keyed off CONFIG_OF. When building a platform without DT support and manually enabling CONFIG_OF, we now get a number of build errors, e.g. arch/arm/kernel/devtree.c: In function 'setup_machine_fdt': arch/arm/kernel/devtree.c:215:19: error: implicit declaration of function 'early_init_dt_verify' [-Werror=implicit-function-declaration] We could now try to separate the use case of booting from DT vs. the case of using the dynamic implementation, but that seems more complicated than it can gain us. This simply changes the ARM Kconfig file to always enable OF_RESERVED_MEM and OF_EARLY_FLATTREE when CONFIG_OF is enabled. These options add a little extra code when we just want the dynamic OF implementation, but that seems like a rather obscure case, and this version solves all CONFIG_OF related randconfig regressions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0166dc11be91 ("of: make CONFIG_OF user selectable") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 28 November 2015, 23:26:12 UTC |
081f369 | Linus Torvalds | 28 November 2015, 21:07:41 UTC | Merge tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes I'd like to have in v4.4: a generic one for sysfs and three for HiSilicon and DesignWare host controllers. Summary: NUMA: - Prevent out of bounds access in numa_node override (Mathias Krause) HiSilicon host bridge driver: - Fix deferred probing (Arnd Bergmann) Synopsys DesignWare host bridge driver: - Remove incorrect io_base assignment (Stanimir Varbanov) - Move align_resource function pointer to pci_host_bridge structure (Gabriele Paoloni)" * tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ARM/PCI: Move align_resource function pointer to pci_host_bridge structure PCI: hisi: Fix deferred probing PCI: designware: Remove incorrect io_base assignment PCI: Prevent out of bounds access in numa_node override | 28 November 2015, 21:07:41 UTC |
8003a57 | Linus Torvalds | 28 November 2015, 01:22:47 UTC | Merge tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - Fix a NFSv4 callback identifier leak that was also causing client crashes - Fix NFSv4 callback decoding issues when incoming requests are truncated - Don't declare the attribute cache valid when we call nfs_update_inode with an empty attribute structure. - Resend LAYOUTGET when there is a race that changes the seqid Bugfixes: - Fix a number of issues with the NFSv4.2 CLONE ioctl() - Properly set NFS v4.2 NFSDBG_FACILITY - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY - Ensure that attrcache is revalidated after a SETATTR" * tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs4: resend LAYOUTGET when there is a race that changes the seqid nfs: if we have no valid attrs, then don't declare the attribute cache valid nfs: ensure that attrcache is revalidated after a SETATTR nfs4: limit callback decoding to received bytes nfs4: start callback_ident at idr 1 nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success NFS: Properly set NFS v4.2 NFSDBG_FACILITY nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c nfs: use btrfs ioctl defintions for clone nfs: allow intra-file CLONE nfs: offer native ioctls even if CONFIG_COMPAT is set nfs: pass on count for CLONE operations | 28 November 2015, 01:22:47 UTC |
d0bc387 | Linus Torvalds | 27 November 2015, 23:53:23 UTC | Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - a null pointer dereference fix for omap_wdt - some clock related fixes for pnx4008 - an underflow fix in wdt_set_timeout() for w83977f_wdt - restart fix for tegra wdt - Kconfig change to support Freescale Layerscape platforms - fix for stopping the mtk_wdt watchdog * git://www.linux-watchdog.org/linux-watchdog: watchdog: mtk_wdt: Use MODE_KEY when stopping the watchdog watchdog: Add support for Freescale Layerscape platforms watchdog: tegra: Stop watchdog first if restarting watchdog: w83977f_wdt: underflow in wdt_set_timeout() watchdog: pnx4008: make global wdt_clk static watchdog: pnx4008: fix warnings caused by enabling unprepared clock watchdog: omap_wdt: fix null pointer dereference | 27 November 2015, 23:53:23 UTC |
80e0c50 | Linus Torvalds | 27 November 2015, 23:45:45 UTC | Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has Mark Fasheh's patches to fix quota accounting during subvol deletion, which we've been working on for a while now. The patch is pretty small but it's a key fix. Otherwise it's a random assortment" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix balance range usage filters in 4.4-rc btrfs: qgroup: account shared subtree during snapshot delete Btrfs: use btrfs_get_fs_root in resolve_indirect_ref btrfs: qgroup: fix quota disable during rescan Btrfs: fix race between cleaner kthread and space cache writeout Btrfs: fix scrub preventing unused block groups from being deleted Btrfs: fix race between scrub and block group deletion btrfs: fix rcu warning during device replace btrfs: Continue replace when set_block_ro failed btrfs: fix clashing number of the enhanced balance usage filter Btrfs: fix the number of transaction units needed to remove a block group Btrfs: use global reserve when deleting unused block group after ENOSPC Btrfs: tests: checking for NULL instead of IS_ERR() btrfs: fix signed overflows in btrfs_sync_file | 27 November 2015, 23:45:45 UTC |
7e4b935 | Linus Torvalds | 27 November 2015, 23:27:52 UTC | Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer fixes from James Morris: "A fix for SELinux policy processing (regression introduced by commit fa1aa143ac4a: "selinux: extended permissions for ioctls"), as well as a fix for the user-triggerable oops in the Keys code" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix handling of stored error in a negatively instantiated user key selinux: fix bug in conditional rules handling | 27 November 2015, 23:27:52 UTC |
c64410f | Linus Torvalds | 27 November 2015, 22:22:03 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "There is a small backlog of at91 patches here, the most significant is the addition of some sama5d2 Xplained nodes that were waiting on an MFD include file to get merged through another tree. We normally try to sort those out before the merge window opens, but the maintainer wasn't aware of that here and I decided to merge the changes this time as an exception. On OMAP a series of audio changes for dra7 missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to get audio working. The other changes are the usual simple changes, here is a list sorted by platform: at91: removal of a useless defconfig option removal of some legacy DT pieces use of the proper watchdog compatible string update of the MAINTAINERS entries for some Atmel drivers drivers/scpi: hide get_scpi_ops in module from built-in code imx: add missing .irq_set_type for i.MX GPC irq_chip. fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. fix a merge error in Vybrid dts regarding to ADC device property keystone: fix the optional PDSP firmware loading fix linking RAM setup for QMs fix crash with clk_ignore_unused mediatek: Enable SCPSYS power domain driver by default mvebu: fix QNAP TS219 power-off in dts fix legacy get_irqnr_and_base for dove and orion5x omap: fix l4 related boot time errors for dm81xx use lockless cldm/pwrdm api in omap4_boot_secondary remove t410 abort handler to avoid hiding other critical errors mark cpuidle tracepoints as _rcuidle fix module alias for omap-ocp2scp pxa: palm: Fix typos in PWM lookup table code renesas: missing __initconst annotation for r8a7793_boards_compat_dt rockchip: disable mmc-tuning on the veyron-minnie board adding the init state for the over-temperature-protection zx: only build power domain code when CONFIG_PM=y" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base soc: Mediatek: Enable SCPSYS power domain driver by default ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node ARM: shmobile: r8a7793: proper constness with __initconst scpi: hide get_scpi_ops in module from built-in code ARM: zx: only build power domain code when CONFIG_PM=y ARM: pxa: palm: Fix typos in PWM lookup table code ARM: dts: Kirkwood: Fix QNAP TS219 power-off ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie MAINTAINERS: Atmel drivers: change NAND and ISI entries ARM: at91/dt: sama5d2 Xplained: add several devices ... | 27 November 2015, 22:22:03 UTC |
a3b11c7 | Linus Torvalds | 27 November 2015, 21:12:42 UTC | Merge tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI fixes from Rafael Wysocki: "These fix one recent regression (cpufreq core), fix up two features added recently (ACPI CPPC support, SCPI support in the arm_big_little cpufreq driver) and fix three older bugs in the intel_pstate driver. Specifics: - Fix a recent regression in the cpufreq core causing it to fail to clean up sysfs directories properly on cpufreq driver removal (Viresh Kumar). - Fix a build problem in the SCPI support code recently added to the arm_big_little cpufreq driver (Punit Agrawal). - Fix up the recently added CPPC cpufreq frontend to process the CPU coordination information provided by the platform firmware correctly (Ashwin Chaugule). - Fix the intel_pstate driver to behave as intended when switched over to the "performance" mode via sysfs if hardware-driven P-state selection (HWP) is enabled (Alexandra Yates). - Fix two rounding errors in the intel_pstate driver that sometimes cause it to use lower P-states than requested (Prarit Bhargava)" * tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: Fix "performance" mode behavior with HWP enabled cpufreq: SCPI: Depend on SCPI clk driver cpufreq: intel_pstate: Fix limits->max_perf rounding error cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev() cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly | 27 November 2015, 21:12:42 UTC |
8c14f72 | Dave Airlie | 27 November 2015, 20:50:34 UTC | Merge branch 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Ben Skeggs wrote: A couple of regression fixes, some more boards whitelisted for a hw bug workaround, gr/ucode fixes for hangs a user is seeing. The changes look larger than they actually are due to the ucode binaries (*.fucN.h) being regenerated. * 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM | 27 November 2015, 20:50:34 UTC |
1724734 | Linus Torvalds | 27 November 2015, 19:59:02 UTC | Merge tag 'sound-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are no big surprises but just all small fixes, mostly device-specific quirks for HD-audio and USB-audio: - Fix for detection of FireWire DICE Loud devices - Intel Broxton HDMI/DP PCI IDs and relevant quirks - Noise fixes: Dell XPS13 2015 model, Dell Latitude E6440, Gigabyte Z170X mobo - Fix the headphone mixer assignment on HP laptops for PulseAudio - USB-MIDI fixes for Medeli DD305 and CH345 - Apply fixup for Acer Aspire One Cloudbook 14" * tag 'sound-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix noise on Gigabyte Z170X mobo ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3 ALSA: hda - Apply HP headphone fixups more generically ALSA: hda - Add fixup for Acer Aspire One Cloudbook 14 ALSA: hda - apply SKL display power request/release patch to BXT ALSA: hda - add PCI IDs for Intel Broxton ALSA: usb-audio: work around CH345 input SysEx corruption ALSA: usb-audio: prevent CH345 multiport output SysEx corruption ALSA: usb-audio: add packet size quirk for the Medeli DD305 ALSA: dice: fix detection of Loud devices ALSA: hda - Fix noise on Dell Latitude E6440 | 27 November 2015, 19:59:02 UTC |
5d86862 | Linus Torvalds | 27 November 2015, 19:09:59 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Build fix when !CONFIG_UID16 (the patch is touching generic files but it only affects arm64 builds; submitted by Arnd Bergmann) - EFI fixes to deal with early_memremap() returning NULL and correctly mapping run-time regions - Fix CPUID register extraction of unsigned fields (not to be sign-extended) - ASID allocator fix to deal with long-running tasks over multiple generation roll-overs - Revert support for marking page ranges as contiguous PTEs (it leads to TLB conflicts and requires additional non-trivial kernel changes) - Proper early_alloc() failure check - Disable KASan for 48-bit VA and 16KB page configuration (the pgd is larger than the KASan shadow memory) - Update the fault_info table (original descriptions based on early engineering spec) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: efi: fix initcall return values arm64: efi: deal with NULL return value of early_memremap() arm64: debug: Treat the BRPs/WRPs as unsigned arm64: cpufeature: Track unsigned fields arm64: cpufeature: Add helpers for extracting unsigned values Revert "arm64: Mark kernel page ranges contiguous" arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers arm64: KASAN depends on !(ARM64_16K_PAGES && ARM64_VA_BITS_48) arm64: efi: correctly map runtime regions arm64: mm: fix fault_info table xFSC decoding arm64: fix building without CONFIG_UID16 arm64: early_alloc: Fix check for allocation failure | 27 November 2015, 19:09:59 UTC |
5a44ed0 | Linus Torvalds | 27 November 2015, 19:05:50 UTC | Merge tag 'nios2-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 fix from Ley Foon Tan: "nios2: fix cache coherency" * tag 'nios2-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: fix cache coherency | 27 November 2015, 19:05:50 UTC |
c861519 | Ralf Baechle | 27 November 2015, 18:17:01 UTC | MIPS: Fix delay loops which may be removed by GCC. GCC 4.1 and newer remove empty loops. This becomes a problem when delay loops get removed. Fixed by rewriting to user the proper Linux interface for such delays. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: John Crispin <blogic@openwrt.org> | 27 November 2015, 18:20:37 UTC |
03018ac | Linus Torvalds | 27 November 2015, 18:08:31 UTC | Merge tag 'arc-4.4-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix for perf callgraph unwinding causing RCU stalls - Fix to enable Linux to run on non-default Interrupt priority 0 - Removal of pointless SYNC from __switch_to() * tag 'arc-4.4-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: dw2 unwind: Remove falllback linear search thru FDE entries ARC: remove SYNC from __switch_to() ARCv2: Use the default irq priority for idle sleep ARC: Abstract out ISA specific SLEEP args ARC: comments update ARC: switch to arc-linux- CROSS_COMPILE prefix across all configs | 27 November 2015, 18:08:31 UTC |
a405fd1 | Arnd Bergmann | 27 November 2015, 16:41:48 UTC | Merge tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: devicetree fixes for 4.4" from Heiko Stuebner: Two fixes to Rockchip devicetree files, disabling the mmc-tuning on the veyron-minnie board for now and adding the init state for the over-temperature-protection to prevent glitches making the system reboot sometimes. * tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie | 27 November 2015, 16:41:48 UTC |
5530f85 | Arnd Bergmann | 27 November 2015, 16:28:41 UTC | Merge tag 'mvebu-fixes-4.4-1' of git://git.infradead.org/linux-mvebu into fixes Merge "mvebu fixes for 4.4 (part 1)" from Jason Cooper: - Fix QNAP TS219 power-off in dts - Fix legacy get_irqnr_and_base for dove and orion5x * tag 'mvebu-fixes-4.4-1' of git://git.infradead.org/linux-mvebu: ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base ARM: dts: Kirkwood: Fix QNAP TS219 power-off | 27 November 2015, 16:28:41 UTC |
97a586d | Arnd Bergmann | 27 November 2015, 16:28:10 UTC | Merge tag 'renesas-fixes-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.4" from Simon Horman: * r8a7793 SoC: Annotate r8a7793_boards_compat_dt with __initconst Aside from being correct this builds that otherwise fail with section mismatch errors. * tag 'renesas-fixes-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7793: proper constness with __initconst | 27 November 2015, 16:28:10 UTC |
f28a1b0 | Rafael J. Wysocki | 27 November 2015, 15:23:59 UTC | Merge branches 'pm-cpufreq' and 'acpi-cppc' * pm-cpufreq: intel_pstate: Fix "performance" mode behavior with HWP enabled cpufreq: SCPI: Depend on SCPI clk driver cpufreq: intel_pstate: Fix limits->max_perf rounding error cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev() * acpi-cppc: cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly | 27 November 2015, 15:23:59 UTC |
4fe5e19 | Linus Torvalds | 26 November 2015, 19:42:25 UTC | Merge tag 'for-linus-4.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix gntdev and numa balancing. - Fix x86 boot crash due to unallocated legacy irq descs. - Fix overflow in evtchn device when > 1024 event channels. * tag 'for-linus-4.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/evtchn: dynamically grow pending event channel ring xen/events: Always allocate legacy interrupts on PV guests xen/gntdev: Grant maps should not be subject to NUMA balancing | 26 November 2015, 19:42:25 UTC |
02a5fec | Linus Torvalds | 26 November 2015, 19:19:59 UTC | Merge tag 'powerpc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - tm: Block signal return from setting invalid MSR state from Michael Neuling - tm: Check for already reclaimed tasks from Michael Neuling * tag 'powerpc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/tm: Check for already reclaimed tasks powerpc/tm: Block signal return setting invalid MSR state | 26 November 2015, 19:19:59 UTC |
8620015 | David Vrabel | 26 November 2015, 16:14:35 UTC | xen/evtchn: dynamically grow pending event channel ring If more than 1024 event channels are bound to a evtchn device then it possible (even with well behaved applications) for the ring to overflow and events to be lost (reported as an -EFBIG error). Dynamically increase the size of the ring so there is always enough space for all bound events. Well behaved applicables that only unmask events after draining them from the ring can thus no longer lose events. However, an application could unmask an event before draining it, allowing multiple entries per port to accumulate in the ring, and a overflow could still occur. So the overflow detection and reporting is retained. The ring size is initially only 64 entries so the common use case of an application only binding a few events will use less memory than before. The ring size may grow to 512 KiB (enough for all 2^17 possible channels). This order 7 kmalloc() may fail due to memory fragmentation, so we fall back to trying vmalloc(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> | 26 November 2015, 18:49:54 UTC |
66362c9 | Ard Biesheuvel | 23 November 2015, 07:43:24 UTC | arm64: efi: fix initcall return values Even though initcall return values are typically ignored, the prototype is to return 0 on success or a negative errno value on error. So fix the arm_enable_runtime_services() implementation to return 0 on conditions that are not in fact errors, and return a meaningful error code otherwise. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 18:15:54 UTC |
81d9457 | Ard Biesheuvel | 23 November 2015, 07:43:23 UTC | arm64: efi: deal with NULL return value of early_memremap() Add NULL return value checks to two invocations of early_memremap() in the UEFI init code. For the UEFI configuration tables, we just warn since we have a better chance of being able to report the issue in a way that can actually be noticed by a human operator if we don't abort right away. For the UEFI memory map, however, all we can do is panic() since we cannot proceed without a description of memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 18:15:49 UTC |
1944bf8 | Suzuki K. Poulose | 18 November 2015, 17:08:58 UTC | arm64: debug: Treat the BRPs/WRPs as unsigned IDAA64DFR0_EL1: BRPs and WRPs are unsigned values. Use the appropriate helpers to extract those fields. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 18:08:36 UTC |
4f0a606 | Suzuki K. Poulose | 18 November 2015, 17:08:57 UTC | arm64: cpufeature: Track unsigned fields Some of the feature bits have unsigned values and need to be treated accordingly to avoid errors. Adds the property to the feature bits and use the appropriate field extract helpers. Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 18:07:59 UTC |
b4ff838 | Boris Ostrovsky | 20 November 2015, 16:25:04 UTC | xen/events: Always allocate legacy interrupts on PV guests After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> | 26 November 2015, 18:05:01 UTC |
d211827 | Suzuki K. Poulose | 18 November 2015, 17:08:56 UTC | arm64: cpufeature: Add helpers for extracting unsigned values The cpuid_feature_extract_field() extracts the feature value as a signed integer. This could be problematic for features whose values are unsigned. e.g, ID_AA64DFR0_EL1:BRPs. Add an unsigned variant for the unsigned fields. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 18:02:42 UTC |
9c17d96 | Boris Ostrovsky | 10 November 2015, 20:10:33 UTC | xen/gntdev: Grant maps should not be subject to NUMA balancing Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> | 26 November 2015, 17:47:35 UTC |
3abb1ad | Simon Guinot | 26 November 2015, 14:37:13 UTC | rtc: ds1307: fix alarm reading at probe time With the actual code, read_alarm() always returns -EINVAL when called during the RTC device registration. This prevents from retrieving an already configured alarm in hardware. This patch fixes the issue by moving the HAS_ALARM bit configuration (if supported by the hardware) above the rtc_device_register() call. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 26 November 2015, 17:11:26 UTC |
667c275 | Catalin Marinas | 26 November 2015, 15:42:41 UTC | Revert "arm64: Mark kernel page ranges contiguous" This reverts commit 348a65cdcbbf243073ee39d1f7d4413081ad7eab. Incorrect page table manipulation that does not respect the ARM ARM recommended break-before-make sequence may lead to TLB conflicts. The contiguous PTE patch makes the system even more susceptible to such errors by changing the mapping from a single page to a contiguous range of pages. An additional TLB invalidation would reduce the risk window, however, the correct fix is to switch to a temporary swapper_pg_dir. Once the correct workaround is done, the reverted commit will be re-applied. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Jeremy Linton <jeremy.linton@arm.com> | 26 November 2015, 15:42:41 UTC |
0ebea80 | Will Deacon | 26 November 2015, 13:49:39 UTC | arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Reported-by: Tony Thompson <anthony.thompson@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 15:27:10 UTC |
f1b9032 | Andrey Ryabinin | 17 November 2015, 15:47:08 UTC | arm64: KASAN depends on !(ARM64_16K_PAGES && ARM64_VA_BITS_48) On KASAN + 16K_PAGES + 48BIT_VA arch/arm64/mm/kasan_init.c: In function ‘kasan_early_init’: include/linux/compiler.h:484:38: error: call to ‘__compiletime_assert_95’ declared with attribute error: BUILD_BUG_ON failed: !IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE) _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) Currently KASAN will not work on 16K_PAGES and 48BIT_VA, so forbid such configuration to avoid above build failure. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Suzuki K. Poulose <Suzuki.Poulose@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 26 November 2015, 15:27:09 UTC |
8e3d7c8 | Ley Foon Tan | 26 November 2015, 14:25:58 UTC | nios2: fix cache coherency There is intermittent cache coherency issue caught in toolchian tests. Revert to use flushd. Signed-off-by: Ley Foon Tan <lftan@altera.com> | 26 November 2015, 14:25:58 UTC |
6e37592 | James Morris | 26 November 2015, 04:04:19 UTC | Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into for-linus2 | 26 November 2015, 04:04:19 UTC |
2f13716 | Dave Airlie | 26 November 2015, 02:42:15 UTC | Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Radeon and amdgpu fixes for 4.4: - DPM fixes for r7xx devices - VCE fixes for Stoney - GPUVM fixes - Scheduler fixes * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: make some dpm errors debug only drm/radeon: make rv770_set_sw_state failures non-fatal drm/amdgpu: move dependency handling out of atomic section v2 drm/amdgpu: optimize scheduler fence handling drm/amdgpu: remove vm->mutex drm/amdgpu: add mutex for ba_va->valids/invalids drm/amdgpu: adapt vce session create interface changes drm/amdgpu: vce use multiple cache surface starting from stoney drm/amdgpu: reset vce trap interrupt flag | 26 November 2015, 02:42:15 UTC |
78c4a49 | Linus Torvalds | 25 November 2015, 23:11:08 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes for sendfile lockups caught by Dmitry + a fix for ancient sysvfs symlink breakage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Avoid softlockups with sendfile(2) vfs: Make sendfile(2) killable even better fix sysvfs symlinks | 25 November 2015, 23:11:08 UTC |
5597afa | Arnd Bergmann | 25 November 2015, 22:48:57 UTC | Merge tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Fixes for omaps for v4.4-rc cycle" from Tony Lindgren: - A series of audio changes for dra7 that missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to getaudio working - Fix l4 related boot time errors for dm81xx - Use lockless cldm/pwrdm api in omap4_boot_secondary - Remove t410 custom abort handler that is no longer needed and may hide other critical errors - Mark cpuidle tracepoints as _rcuidle - Fix module alias for omap-ocp2scp * tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: OMAP2+: remove custom abort handler for t410 ARM: OMAP: DRA7: hwmod: Add data for McASP3 ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED ARM: dts: dra7: Fix McASP3 node regarding to clocks bus: omap-ocp2scp: Fix module alias ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle() | 25 November 2015, 22:48:57 UTC |
e6b66df | Arnd Bergmann | 25 November 2015, 22:48:12 UTC | Merge tag 'keystone-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Merge "Few Keystone fixes for 4.4-rcx" from Santosh Shilimkar: - Fix the optional PDSP firmware loading - Fix linking RAM setup for QMs - Fix crash with clk_ignore_unused * tag 'keystone-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional | 25 November 2015, 22:48:12 UTC |
d3de94b | Arnd Bergmann | 25 November 2015, 22:47:38 UTC | Merge tag 'v4.4-rc2' into fixes Linux 4.4-rc2 is backmerged from the keystone fixes. | 25 November 2015, 22:47:38 UTC |
fabc2c9 | Arnd Bergmann | 25 November 2015, 22:45:53 UTC | Merge tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "The i.MX fixes for 4.4" from Shawn Guo: - Add missing .irq_set_type for i.MX GPC irq_chip. It fixes an issue that device IRQ type setting doesn't match the one specified in device tree, since stacked IRQ domain is adopted in GPC driver. - Fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. - Fix a merge error in Vybrid dts regarding to ADC device property fsl,adck-max-frequency * tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node | 25 November 2015, 22:45:53 UTC |
584ee3d | Alexandra Yates | 18 November 2015, 22:58:40 UTC | intel_pstate: Fix "performance" mode behavior with HWP enabled If hardware-driven P-state selection (HWP) is enabled, the "performance" mode of intel_pstate should only allow the processor to use the highest-performance P-state available. That is not the case currently, so make it actually happen. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> [ rjw: Subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 25 November 2015, 22:37:44 UTC |
4f2e9dc | Jeff Layton | 25 November 2015, 18:43:14 UTC | nfs4: resend LAYOUTGET when there is a race that changes the seqid pnfs_layout_process will check the returned layout stateid against what the kernel has in-core. If it turns out that the stateid we received is older, then we should resend the LAYOUTGET instead of falling back to MDS I/O. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> | 25 November 2015, 20:32:13 UTC |
c812012 | Jeff Layton | 25 November 2015, 18:50:11 UTC | nfs: if we have no valid attrs, then don't declare the attribute cache valid If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by: Steve French <steve.french@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> | 25 November 2015, 20:31:49 UTC |
616c319 | Jeff Layton | 25 November 2015, 18:50:45 UTC | nfs: ensure that attrcache is revalidated after a SETATTR If we get no post-op attributes back from a SETATTR operation, then no attributes will of course be updated during the call to nfs_update_inode. We know however that the attributes are invalid at that point, since we just changed some of them. At the very least, the ctime will be bogus. If we get no post-op attributes back on the call, mark the attrcache invalid to reflect that fact. Reviewed-by: Steve French <steve.french@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> | 25 November 2015, 20:24:30 UTC |
7c7a0e9 | Gabriele Paoloni | 11 November 2015, 01:12:25 UTC | ARM/PCI: Move align_resource function pointer to pci_host_bridge structure Commit b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer") introduced an ARM-specific align_resource() function pointer. This is not portable to other arches and doesn't work for platforms with two different PCIe host bridge controllers. Move the function pointer to the pci_host_bridge structure so each host bridge driver can specify its own align_resource() function. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> | 25 November 2015, 19:23:38 UTC |
9b81d51 | Linus Torvalds | 25 November 2015, 19:08:35 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull more block layer fixes from Jens Axboe: "I wasn't going to send off a new pull before next week, but the blk flush fix from Jan from the other day introduced a regression. It's rare enough not to have hit during testing, since it requires both a device that rejects the first flush, and bad timing while it does that. But since someone did hit it, let's get the revert into 4.4-rc3 so we don't have a released rc with that known issue. Apart from that revert, three other fixes: - From Christoph, a fix for a missing unmap in NVMe request preparation. - An NVMe fix from Nishanth that fixes data corruption on powerpc. - Also from Christoph, fix a list_del() attempt on blk-mq that didn't have a matching list_add() at timer start" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "blk-flush: Queue through IO scheduler when flush not required" block: fix blk_abort_request for blk-mq drivers nvme: add missing unmaps in nvme_queue_rq NVMe: default to 4k device page size | 25 November 2015, 19:08:35 UTC |
918af9f | Grygorii Strashko | 16 November 2015, 17:38:53 UTC | ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary OMAP CPU hotplug uses cpu1's clocks and power domains for CPU1 wake up from low power states (or turn on CPU1). This part of code is also part of system suspend (disable_nonboot_cpus()). >From other side, cpu1's clocks and power domains are used by CPUIdle. All above functionality is mutually exclusive and, therefore, lockless clkdm/pwrdm api can be used in omap4_boot_secondary(). This fixes below back-trace on -RT which is triggered by pwrdm_lock/unlock(): BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 0, pid: 118, name: sh 9 locks held by sh/118: #0: (sb_writers#4){.+.+.+}, at: [<c0144a6c>] vfs_write+0x13c/0x164 #1: (&of->mutex){+.+.+.}, at: [<c01b4c70>] kernfs_fop_write+0x48/0x19c #2: (s_active#24){.+.+.+}, at: [<c01b4c78>] kernfs_fop_write+0x50/0x19c #3: (device_hotplug_lock){+.+.+.}, at: [<c03cbff0>] lock_device_hotplug_sysfs+0xc/0x4c #4: (&dev->mutex){......}, at: [<c03cd284>] device_online+0x14/0x88 #5: (cpu_add_remove_lock){+.+.+.}, at: [<c003af90>] cpu_up+0x50/0x1a0 #6: (cpu_hotplug.lock){++++++}, at: [<c003ae48>] cpu_hotplug_begin+0x0/0xc4 #7: (cpu_hotplug.lock#2){+.+.+.}, at: [<c003aec0>] cpu_hotplug_begin+0x78/0xc4 #8: (boot_lock){+.+...}, at: [<c002b254>] omap4_boot_secondary+0x1c/0x178 Preemption disabled at:[< (null)>] (null) CPU: 0 PID: 118 Comm: sh Not tainted 4.1.12-rt11-01998-gb4a62c3-dirty #137 Hardware name: Generic DRA74X (Flattened Device Tree) [<c0017574>] (unwind_backtrace) from [<c0013be8>] (show_stack+0x10/0x14) [<c0013be8>] (show_stack) from [<c05a8670>] (dump_stack+0x80/0x94) [<c05a8670>] (dump_stack) from [<c05ad158>] (rt_spin_lock+0x24/0x54) [<c05ad158>] (rt_spin_lock) from [<c0030dac>] (clkdm_wakeup+0x10/0x2c) [<c0030dac>] (clkdm_wakeup) from [<c002b2c0>] (omap4_boot_secondary+0x88/0x178) [<c002b2c0>] (omap4_boot_secondary) from [<c0015d00>] (__cpu_up+0xc4/0x164) [<c0015d00>] (__cpu_up) from [<c003b09c>] (cpu_up+0x15c/0x1a0) [<c003b09c>] (cpu_up) from [<c03cd2d4>] (device_online+0x64/0x88) [<c03cd2d4>] (device_online) from [<c03cd360>] (online_store+0x68/0x74) [<c03cd360>] (online_store) from [<c01b4ce0>] (kernfs_fop_write+0xb8/0x19c) [<c01b4ce0>] (kernfs_fop_write) from [<c0144124>] (__vfs_write+0x20/0xd8) [<c0144124>] (__vfs_write) from [<c01449c0>] (vfs_write+0x90/0x164) [<c01449c0>] (vfs_write) from [<c01451e4>] (SyS_write+0x44/0x9c) [<c01451e4>] (SyS_write) from [<c0010240>] (ret_fast_syscall+0x0/0x54) CPU1: smp_ops.cpu_die() returned, trying to resuscitate Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 25 November 2015, 19:03:20 UTC |
970259b | Tony Lindgren | 25 November 2015, 18:56:40 UTC | Merge branch '81xx' into omap-for-v4.4/fixes | 25 November 2015, 18:56:40 UTC |
29f5b34 | Neil Armstrong | 13 November 2015, 16:29:53 UTC | arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data Add missing HWMOD_NO_IDLEST hwmod flag for entries not having omap4 clkctrl values. The emac0 hwmod flag fixes the davinci_emac driver probe since the return of pm_resume() call is now checked. This solves the following boot errors : [ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16 [ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3) [ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16 [ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3) [ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16 Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 25 November 2015, 18:54:22 UTC |
dcd8376 | Jens Axboe | 25 November 2015, 17:12:54 UTC | Revert "blk-flush: Queue through IO scheduler when flush not required" This reverts commit 1b2ff19e6a957b1ef0f365ad331b608af80e932e. Jan writes: -- Thanks for report! After some investigation I found out we allocate elevator specific data in __get_request() only for non-flush requests. And this is actually required since the flush machinery uses the space in struct request for something else. Doh. So my patch is just wrong and not easy to fix since at the time __get_request() is called we are not sure whether the flush machinery will be used in the end. Jens, please revert 1b2ff19e6a957b1ef0f365ad331b608af80e932e. Thanks! I'm somewhat surprised that you can reliably hit the race where flushing gets disabled for the device just while the request is in flight. But I guess during boot it makes some sense. -- So let's just revert it, we can fix the queue run manually after the fact. This race is rare enough that it didn't trigger in testing, it requires the specific disable-while-in-flight scenario to trigger. | 25 November 2015, 17:12:54 UTC |
4cf193b | Linus Torvalds | 25 November 2015, 17:01:49 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Bug fixes for all architectures. Nothing really stands out" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: remove incorrect vpid check in nested invvpid emulation arm64: kvm: report original PAR_EL1 upon panic arm64: kvm: avoid %p in __kvm_hyp_panic KVM: arm/arm64: vgic: Trust the LR state for HW IRQs KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active KVM: arm/arm64: Fix preemptible timer active state crazyness arm64: KVM: Add workaround for Cortex-A57 erratum 834220 arm64: KVM: Fix AArch32 to AArch64 register mapping ARM/arm64: KVM: test properly for a PTE's uncachedness KVM: s390: fix wrong lookup of VCPUs by array index KVM: s390: avoid memory overwrites on emergency signal injection KVM: Provide function for VCPU lookup by id KVM: s390: fix pfmf intercept handler KVM: s390: enable SIMD only when no VCPUs were created KVM: x86: request interrupt window when IRQ chip is split KVM: x86: set KVM_REQ_EVENT on local interrupt request from user space KVM: x86: split kvm_vcpu_ready_for_interrupt_injection out of dm_request_for_irq_injection KVM: x86: fix interrupt window handling in split IRQ chip case MIPS: KVM: Uninit VCPU in vcpu_create error path MIPS: KVM: Fix CACHE immediate offset sign extension ... | 25 November 2015, 17:01:49 UTC |
9c565e3 | Alex Deucher | 23 November 2015, 21:38:12 UTC | drm/radeon: make some dpm errors debug only "Could not force DPM to low", etc. is usually harmless and just confuses users. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 25 November 2015, 16:28:42 UTC |
3b12acf | Mark Rutland | 23 November 2015, 11:09:11 UTC | arm64: efi: correctly map runtime regions The kernel may use a page granularity of 4K, 16K, or 64K depending on configuration. When mapping EFI runtime regions, we use memrange_efi_to_native to round the physical base address of a region down to a kernel page boundary, and round the size up to a kernel page boundary, adding the residue left over from rounding down the physical base address. We do not round down the virtual base address. In __create_mapping we account for the offset of the virtual base from a granule boundary, adding the residue to the size before rounding the base down to said granule boundary. Thus we account for the residue twice, and when the residue is non-zero will cause __create_mapping to map an additional page at the end of the region. Depending on the memory map, this page may be in a region we are not intended/permitted to map, or may clash with a different region that we wish to map. In typical cases, mapping the next item in the memory map will overwrite the erroneously created entry, as we sort the memory map in the stub. As __create_mapping can cope with base addresses which are not page aligned, we can instead rely on it to map the region appropriately, and simplify efi_virtmap_init by removing the unnecessary code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 25 November 2015, 15:49:17 UTC |
c03784e | Mark Rutland | 23 November 2015, 15:09:36 UTC | arm64: mm: fix fault_info table xFSC decoding We are missing descriptions for some valid xFSC values in the fault info table (e.g. "TLB conflict abort"), and have erroneous descriptions for reserved values (e.g. "asynchronous external abort", "debug event"). This patch adds the missing xFSC values, and removes erroneous decoding of values reserved by the architecture, as described in ARM DDI 0487A.h. At the same time, fixed the unbalanced brackets for the synchronous parity error strings in the table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 25 November 2015, 15:49:16 UTC |
fbc416f | Arnd Bergmann | 20 November 2015, 11:12:21 UTC | arm64: fix building without CONFIG_UID16 As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16 disabled currently fails because the system call table still needs to reference the individual function entry points that are provided by kernel/sys_ni.c in this case, and the declarations are hidden inside of #ifdef CONFIG_UID16: arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function) __SYSCALL(__NR_lchown, sys_lchown16) I believe this problem only exists on ARM64, because older architectures tend to not need declarations when their system call table is built in assembly code, while newer architectures tend to not need UID16 support. ARM64 only uses these system calls for compatibility with 32-bit ARM binaries. This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is set unconditionally on ARM64 with CONFIG_COMPAT, so we see the declarations whenever we need them, but otherwise the behavior is unchanged. Fixes: af1839eb4bd4 ("Kconfig: clean up the long arch list for the UID16 config option") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 25 November 2015, 15:49:13 UTC |
4d2ec7e | Nicolas Pitre | 23 November 2015, 03:44:19 UTC | ARM: orion5x: Fix legacy get_irqnr_and_base Commit 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") shifted IRQ numbers by one but didn't update the get_irqnr_and_base macro accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER is not defined. [jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18] Signed-off-by: Nicolas Pitre <nico@linaro.org> Fixes: 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 25 November 2015, 15:01:00 UTC |
c1c9072 | Nicolas Pitre | 23 November 2015, 03:40:03 UTC | ARM: dove: Fix legacy get_irqnr_and_base Commit 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers") shifted IRQ numbers by one but didn't update the get_irqnr_and_base macro accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER is not defined. [jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18] Signed-off-by: Nicolas Pitre <nico@linaro.org> Fixes: 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 25 November 2015, 14:59:12 UTC |
b2467e7 | Haozhong Zhang | 25 November 2015, 09:21:39 UTC | KVM: nVMX: remove incorrect vpid check in nested invvpid emulation This patch removes the vpid check when emulating nested invvpid instruction of type all-contexts invalidation. The existing code is incorrect because: (1) According to Intel SDM Vol 3, Section "INVVPID - Invalidate Translations Based on VPID", invvpid instruction does not check vpid in the invvpid descriptor when its type is all-contexts invalidation. (2) According to the same document, invvpid of type all-contexts invalidation does not require there is an active VMCS, so/and get_vmcs12() in the existing code may result in a NULL-pointer dereference. In practice, it can crash both KVM itself and L1 hypervisors that use invvpid (e.g. Xen). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 25 November 2015, 14:52:55 UTC |
dba72cb | Holger Hoffstätte | 17 November 2015, 11:29:32 UTC | btrfs: fix balance range usage filters in 4.4-rc There's a regression in 4.4-rc since commit bc3094673f22 (btrfs: extend balance filter usage to take minimum and maximum) in that existing (non-ranged) balance with -dusage=x no longer works; all chunks are skipped. After staring at the code for a while and wondering why a non-ranged balance would even need min and max thresholds (..which then were not set correctly, leading to the bug) I realized that the only problem was the fact that the filter functions were named wrong, thanks to patching copypasta. Simply renaming both functions lets the existing btrfs-progs call balance with -dusage=x and now the non-ranged filter function is invoked, properly using only a single chunk limit. Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Fixes: bc3094673f22 ("btrfs: extend balance filter usage to take minimum and maximum") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:27:33 UTC |
82bd101 | Mark Fasheh | 05 November 2015, 22:38:00 UTC | btrfs: qgroup: account shared subtree during snapshot delete Commit 0ed4792 ('btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.') removed our qgroup accounting during btrfs_drop_snapshot(). Predictably, this results in qgroup numbers going bad shortly after a snapshot is removed. Fix this by adding a dirty extent record when we encounter extents during our shared subtree walk. This effectively restores the functionality we had with the original shared subtree walking code in 1152651 (btrfs: qgroup: account shared subtrees during snapshot delete). The idea with the original patch (and this one) is that shared subtrees can get skipped during drop_snapshot. The shared subtree walk then allows us a chance to visit those extents and add them to the qgroup work for later processing. This ultimately makes the accounting for drop snapshot work. The new qgroup code nicely handles all the other extents during the tree walk via the ref dec/inc functions so we don't have to add actions beyond what we had originally. Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:27:33 UTC |
2d9e977 | Josef Bacik | 05 November 2015, 22:37:58 UTC | Btrfs: use btrfs_get_fs_root in resolve_indirect_ref The backref code will look up the fs_root we're trying to resolve our indirect refs for, unfortunately we use btrfs_read_fs_root_no_name, which returns -ENOENT if the ref is 0. This isn't helpful for the qgroup stuff with snapshot delete as it won't be able to search down the snapshot we are deleting, which will cause us to miss roots. So use btrfs_get_fs_root and send false for check_ref so we can always get the root we're looking for. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:22:08 UTC |
967ef51 | Justin Maggard | 06 November 2015, 18:36:42 UTC | btrfs: qgroup: fix quota disable during rescan There's a race condition that leads to a NULL pointer dereference if you disable quotas while a quota rescan is running. To fix this, we just need to wait for the quota rescan worker to actually exit before tearing down the quota structures. Signed-off-by: Justin Maggard <jmaggard@netgear.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:22:08 UTC |
036a934 | Filipe Manana | 23 November 2015, 15:25:16 UTC | Btrfs: fix race between cleaner kthread and space cache writeout When a block group becomes unused and the cleaner kthread is currently running, we can end up getting the current transaction aborted with error -ENOENT when we try to commit the transaction, leading to the following trace: [59779.258768] WARNING: CPU: 3 PID: 5990 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]() [59779.272594] BTRFS: Transaction aborted (error -2) (...) [59779.291137] Call Trace: [59779.291621] [<ffffffff812566f4>] dump_stack+0x4e/0x79 [59779.292543] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8 [59779.293435] [<ffffffffa04cb81f>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs] [59779.295000] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50 [59779.296138] [<ffffffffa04c2721>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs] [59779.297663] [<ffffffffa04cb81f>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs] [59779.299141] [<ffffffffa0549b0d>] commit_cowonly_roots+0x1de/0x261 [btrfs] [59779.300359] [<ffffffffa04dd5b6>] btrfs_commit_transaction+0x4c4/0x99c [btrfs] [59779.301805] [<ffffffffa04b5df4>] btrfs_sync_fs+0x145/0x1ad [btrfs] [59779.302893] [<ffffffff81196634>] sync_filesystem+0x7f/0x93 (...) [59779.318186] ---[ end trace 577e2daff90da33a ]--- The following diagram illustrates a sequence of steps leading to this problem: CPU 1 CPU 2 <at transaction N> adds bg A to list fs_info->unused_bgs adds bg B to list fs_info->unused_bgs <transaction kthread commits transaction N and wakes up the cleaner kthread> cleaner kthread delete_unused_bgs() sees bg A in list fs_info->unused_bgs btrfs_start_transaction() <transaction N + 1 starts> deletes bg A update_block_group(bg C) --> adds bg C to list fs_info->unused_bgs deletes bg B sees bg C in the list fs_info->unused_bgs btrfs_remove_chunk(bg C) btrfs_remove_block_group(bg C) --> checks if the block group is in a dirty list, and because it isn't now, it does nothing --> the block group item is deleted from the extent tree --> adds bg C to list transaction->dirty_bgs some task calls btrfs_commit_transaction(t N + 1) commit_cowonly_roots() btrfs_write_dirty_block_groups() --> sees bg C in cur_trans->dirty_bgs --> calls write_one_cache_group() which returns -ENOENT because it did not find the block group item in the extent tree --> transaction aborte with -ENOENT because write_one_cache_group() returned that error So fix this by adding a block group to the list of dirty block groups before adding it to the list of unused block groups. This happened on a stress test using fsstress plus concurrent calls to fallocate 20G and truncate (releasing part of the space allocated with fallocate). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:22:08 UTC |
758f2df | Filipe Manana | 19 November 2015, 11:45:48 UTC | Btrfs: fix scrub preventing unused block groups from being deleted Currently scrub can race with the cleaner kthread when the later attempts to delete an unused block group, and the result is preventing the cleaner kthread from ever deleting later the block group - unless the block group becomes used and unused again. The following diagram illustrates that race: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs and removes it from that list scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO sees the block group is already RO and therefore doesn't delete it nor adds it back to unused list So fix this by making scrub add the block group again to the list of unused block groups if the block group is still unused when it finished scrubbing it and it hasn't been removed already. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:22:08 UTC |
020d5b7 | Filipe Manana | 19 November 2015, 10:57:20 UTC | Btrfs: fix race between scrub and block group deletion Scrub can race with the cleaner kthread deleting block groups that are unused (and with relocation too) leading to a failure with error -EINVAL that gets returned to user space. The following diagram illustrates how it happens: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs sets block group to RO btrfs_remove_chunk(bg X) deletes device extents scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO (again) btrfs_remove_block_group(bg X) deletes block group from fs_info->block_group_cache_tree removes extent map from fs_info->mapping_tree scrub_chunk(offset X) searches fs_info->mapping_tree for extent map starting at offset X --> doesn't find any such extent map --> returns -EINVAL and scrub errors out to userspace with -EINVAL Fix this by dealing with an extent map lookup failure as an indicator of block group deletion. Issue reproduced with fstest btrfs/071. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:51 UTC |
31388ab | David Sterba | 19 November 2015, 10:35:17 UTC | btrfs: fix rcu warning during device replace The test btrfs/011 triggers a rcu warning Reviewed-by: Anand Jain <anand.jain@oracle.com> =============================== [ INFO: suspicious RCU usage. ] 4.4.0-rc1-default+ #286 Tainted: G W ------------------------------- fs/btrfs/volumes.c:1977 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by btrfs/28786: 0: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+...}, at: [<ffffffffa00bc785>] btrfs_dev_replace_finishing+0x45/0xa00 [btrfs] 1: (uuid_mutex){+.+.+.}, at: [<ffffffffa00bc84f>] btrfs_dev_replace_finishing+0x10f/0xa00 [btrfs] 2: (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa00bc868>] btrfs_dev_replace_finishing+0x128/0xa00 [btrfs] 3: (&fs_info->chunk_mutex){+.+...}, at: [<ffffffffa00bc87d>] btrfs_dev_replace_finishing+0x13d/0xa00 [btrfs] stack backtrace: CPU: 0 PID: 28786 Comm: btrfs Tainted: G W 4.4.0-rc1-default+ #286 Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS ASNBCPT1.86C.0031.B00.1006301607 06/30/2010 0000000000000001 ffff8800a07dfb48 ffffffff8141d47b 0000000000000001 0000000000000001 0000000000000000 ffff8801464a4f00 ffff8800a07dfb78 ffffffff810cd883 ffff880146eb9400 ffff8800a3698600 ffff8800a33fe220 Call Trace: [<ffffffff8141d47b>] dump_stack+0x4f/0x74 [<ffffffff810cd883>] lockdep_rcu_suspicious+0x103/0x140 [<ffffffffa0071261>] btrfs_rm_dev_replace_remove_srcdev+0x111/0x130 [btrfs] [<ffffffff810d354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81449536>] ? __percpu_counter_sum+0x66/0x80 [<ffffffffa00bcc15>] btrfs_dev_replace_finishing+0x4d5/0xa00 [btrfs] [<ffffffffa00bc96e>] ? btrfs_dev_replace_finishing+0x22e/0xa00 [btrfs] [<ffffffffa00a8795>] ? btrfs_scrub_dev+0x415/0x6d0 [btrfs] [<ffffffffa003ea69>] ? btrfs_start_transaction+0x9/0x20 [btrfs] [<ffffffffa00bda79>] btrfs_dev_replace_start+0x339/0x590 [btrfs] [<ffffffff81196aa5>] ? __might_fault+0x95/0xa0 [<ffffffffa0078638>] btrfs_ioctl_dev_replace+0x118/0x160 [btrfs] [<ffffffff811409c6>] ? stack_trace_call+0x46/0x70 [<ffffffffa007c914>] ? btrfs_ioctl+0x24/0x1770 [btrfs] [<ffffffffa007ce43>] btrfs_ioctl+0x553/0x1770 [btrfs] [<ffffffff811409c6>] ? stack_trace_call+0x46/0x70 [<ffffffff811d6eb1>] ? do_vfs_ioctl+0x21/0x5a0 [<ffffffff811d6f1c>] do_vfs_ioctl+0x8c/0x5a0 [<ffffffff811e3336>] ? __fget_light+0x86/0xb0 [<ffffffff811e3369>] ? __fdget+0x9/0x20 [<ffffffff811d7451>] ? SyS_ioctl+0x21/0x80 [<ffffffff811d7483>] SyS_ioctl+0x53/0x80 [<ffffffff81b1efd7>] entry_SYSCALL_64_fastpath+0x12/0x6f This is because of unprotected use of rcu_dereference in btrfs_scratch_superblocks. We can't add rcu locks around the whole function because we read the superblock. The fix will use the rcu string buffer directly without the rcu locking. Thi is safe as the device will not go away in the meantime. We're holding the device list mutexes. Restructuring the code to narrow down the rcu section turned out to be impossible, we need to call filp_open (through update_dev_time) on the buffer and this could call kmalloc/__might_sleep. We could call kstrdup with GFP_ATOMIC but it's not absolutely necessary. Fixes: 12b1c2637b6e (Btrfs: enhance btrfs_scratch_superblock to scratch all superblocks) Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:51 UTC |
76a8efa | Zhaolei | 17 November 2015, 10:46:17 UTC | btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:51 UTC |
da02c68 | David Sterba | 16 November 2015, 15:50:13 UTC | btrfs: fix clashing number of the enhanced balance usage filter I've accidentally picked an already used number for the enhanced usage filter represented by BTRFS_BALANCE_ARGS_USAGE_RANGE, clashing with BTRFS_BALANCE_ARGS_CONVERT. Introduced during the development phase, no backward compatibility issues. Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: bc3094673f22 ("btrfs: extend balance filter usage to take minimum and maximum") Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:50 UTC |
7fd0118 | Filipe Manana | 13 November 2015, 23:57:17 UTC | Btrfs: fix the number of transaction units needed to remove a block group We were using only 1 transaction unit when attempting to delete an unused block group but in reality we need 3 + N units, where N corresponds to the number of stripes. We were accounting only for the addition of the orphan item (for the block group's free space cache inode) but we were not accounting that we need to delete one block group item from the extent tree, one free space item from the tree of tree roots and N device extent items from the device tree. While one unit is not enough, it worked most of the time because for each single unit we are too pessimistic and assume an entire tree path, with the highest possible heigth (8), needs to be COWed with eventual node splits at every possible level in the tree, so there was usually enough reserved space for removing all the items and adding the orphan item. However after adding the orphan item, writepages() can by called by the VM subsystem against the btree inode when we are under memory pressure, which causes writeback to start for the nodes we COWed before, this forces the operation to remove the free space item to COW again some (or all of) the same nodes (in the tree of tree roots). Even without writepages() being called, we could fail with ENOSPC because these items are located in multiple trees and one of them might have a higher heigth and require node/leaf splits at many levels, exhausting all the reserved space before removing all the items and adding the orphan. In the kernel 4.0 release, commit 3d84be799194 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group"), we attempted to fix a BUG_ON due to ENOSPC when trying to add the orphan item by making the cleaner kthread reserve one transaction unit before attempting to remove the block group, but this was not enough. We had a couple user reports still hitting the same BUG_ON after 4.0, like Stefan Priebe's report on a 4.2-rc6 kernel for example: http://www.spinics.net/lists/linux-btrfs/msg46070.html So fix this by reserving all the necessary units of metadata. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Fixes: 3d84be799194 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:50 UTC |
8eab77f | Filipe Manana | 13 November 2015, 23:57:16 UTC | Btrfs: use global reserve when deleting unused block group after ENOSPC It's possible to reach a state where the cleaner kthread isn't able to start a transaction to delete an unused block group due to lack of enough free metadata space and due to lack of unallocated device space to allocate a new metadata block group as well. If this happens try to use space from the global block group reserve just like we do for unlink operations, so that we don't reach a permanent state where starting a transaction for filesystem operations (file creation, renames, etc) keeps failing with -ENOSPC. Such an unfortunate state was observed on a machine where over a dozen unused data block groups existed and the cleaner kthread was failing to delete them due to ENOSPC error when attempting to start a transaction, and even running balance with a -dusage=0 filter failed with ENOSPC as well. Also unmounting and mounting again the filesystem didn't help. Allowing the cleaner kthread to use the global block reserve to delete the unused data block groups fixed the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:50 UTC |
89b6c8d | Dan Carpenter | 10 November 2015, 09:10:03 UTC | Btrfs: tests: checking for NULL instead of IS_ERR() btrfs_alloc_dummy_root() return an error pointer on failure, it never returns NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:50 UTC |
9dcbeed | David Sterba | 09 November 2015, 10:44:45 UTC | btrfs: fix signed overflows in btrfs_sync_file The calculation of range length in btrfs_sync_file leads to signed overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin. https://forums.grsecurity.net/viewtopic.php?f=1&t=4284 The fsync call passes 0 and LLONG_MAX, the range length does not fit to loff_t and overflows, but the value is converted to u64 so it silently works as expected. The minimal fix is a typecast to u64, switching functions to take (start, end) instead of (start, len) would be more intrusive. Coccinelle script found that there's one more opencoded calculation of the length. <smpl> @@ loff_t start, end; @@ * end - start </smpl> CC: stable@vger.kernel.org Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> | 25 November 2015, 13:19:50 UTC |
7142392 | Suzuki K. Poulose | 20 November 2015, 17:45:40 UTC | arm64: early_alloc: Fix check for allocation failure In early_alloc we check if the memblock_alloc failed by checking the virtual address of the result, which will never fail. This patch fixes it to check the actual result for failure. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 25 November 2015, 12:14:25 UTC |
51c4cfe | Felipe Balbi | 11 November 2015, 16:11:01 UTC | rtc: ds1307: fix kernel splat due to wakeup irq handling Since commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") we have automatic wakeup irq support for i2c devices. That commit missed the fact that rtc-1307 had its own wakeup irq handling and ended up introducing a kernel splat for at least Beagle x15 boards. Fix that by reverting original commit _and_ passing correct interrupt names on DTS so i2c-core can choose correct IRQ as wakeup. Now that we have automatic wakeirq support, we can revert the original commit which did it manually. Fixes the following warning: [ 10.346582] WARNING: CPU: 1 PID: 263 at linux/drivers/base/power/wakeirq.c:43 dev_pm_attach_wake_irq+0xbc/0xd4() [ 10.359244] rtc-ds1307 2-006f: wake irq already initialized Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 25 November 2015, 11:15:44 UTC |
ef0e9f5 | Martin Peres | 05 November 2015, 08:07:38 UTC | drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Martin Peres <martin.peres@free.fr> | 25 November 2015, 05:37:45 UTC |
f5e5518 | Ben Skeggs | 24 November 2015, 05:34:51 UTC | drm/nouveau/nvif: allow userspace access to its own client object Regression from "abi16: implement limited interoperability with usif/nvif". Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
0d7fc24 | Ben Skeggs | 25 November 2015, 02:39:01 UTC | drm/nouveau/gr/gf100-: fix oops when calling zbc methods Somehow missed these two when removing dodgy void casts during the rework. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
2fb2b3c | Ben Skeggs | 22 November 2015, 19:47:19 UTC | drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero fdo#92761 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
ccb7b6b | Ben Skeggs | 22 November 2015, 19:31:51 UTC | drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC Each GPCCS unit was reading the mask from GPC0, which causes problems on boards where some GPCs are missing PPCs. Part of the fix for fdo#92761. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
7028156 | Ben Skeggs | 22 November 2015, 19:24:32 UTC | drm/nouveau/gr/gf100-: split out per-gpc address calculation macro There's a few places where we need to access a GPC register from ucode, but outside of the falcon's io address space. To do this we need to calculate the offset based on which GPC we're executing on. This used to be done manually, but we've since found a "base" offset that can be added by the hardware. To use this, an extra bit needs to be set in the register address, which is what this macro achieves. There should be no functional change from this commit. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
9543294 | Ben Skeggs | 19 November 2015, 03:18:34 UTC | drm/nouveau/bios: return actual size of the buffer retrieved via _ROM Fixes detection of a failed attempt at fetching the entire ROM image in one-shot (a violation of the spec, that works a lot of the time). Tested on a HP Zbook 15 G2. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |
9509503 | Ben Skeggs | 10 November 2015, 23:48:13 UTC | drm/nouveau/instmem: protect instobj list with a spinlock No locking is required for the traversal of this list, as it only happens during suspend/resume where nothing else can be executing. Fixes some of the issues noticed during parallel piglit runs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 25 November 2015, 05:31:21 UTC |