https://github.com/torvalds/linux
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.19-rc2
- v5.19-rc1
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.![swh spinner](/static/img/swh-spinner.gif)
Processing "take a new snapshot" request ...
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
fb33c65 | Linus Torvalds | 15 March 2020, 22:01:23 UTC | Linux 5.6-rc6 | 15 March 2020, 22:01:23 UTC |
a42a7bb | Linus Torvalds | 15 March 2020, 20:15:16 UTC | Merge tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single commit to handle an erratum in Cavium ThunderX to prevent access to GIC registers which are broken in the implementation" * tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2 | 15 March 2020, 20:15:16 UTC |
34d5a4b | Linus Torvalds | 15 March 2020, 19:55:52 UTC | Merge tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex fix from Thomas Gleixner: "Fix for yet another subtle futex issue. The futex code used ihold() to prevent inodes from vanishing, but ihold() does not guarantee inode persistence. Replace the inode pointer with a per boot, machine wide, unique inode identifier. The second commit fixes the breakage of the hash mechanism which causes a 100% performance regression" * tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unbreak futex hashing futex: Fix inode life-time issue | 15 March 2020, 19:55:52 UTC |
ec181b7 | Linus Torvalds | 15 March 2020, 19:52:56 UTC | Merge tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Map EFI runtime service data as encrypted when SEV is enabled. Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode. - Remove the warning in the vector management code which triggered when a managed interrupt affinity changed outside of a CPU hotplug operation. The warning was correct until the recent core code change that introduced a CPU isolation feature which needs to migrate managed interrupts away from online CPUs under certain conditions to achieve the isolation" * tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vector: Remove warning on managed interrupt migration x86/ioremap: Map EFI runtime services data as encrypted for SEV | 15 March 2020, 19:52:56 UTC |
e99bc91 | Linus Torvalds | 15 March 2020, 19:50:15 UTC | Merge tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A pile of perf fixes: Kernel side: - AMD uncore driver: Replace the open coded sanity check with the core variant, which provides the correct error code and also leaves a hint in dmesg Tooling: - Fix the stdio input handling with glibc versions >= 2.28 - Unbreak the futex-wake benchmark which was reduced to 0 test threads due to the conversion to cpumaps - Initialize sigaction structs before invoking sys_sigactio() - Plug the mapfile memory leak in perf jevents - Fix off by one relative directory includes - Fix an undefined string comparison in perf diff" * tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag tools: Fix off-by 1 relative directory includes perf jevents: Fix leak of mapfile memory perf bench: Clear struct sigaction before sigaction() syscall perf bench futex-wake: Restore thread count default to online CPU count perf top: Fix stdio interface input handling with glibc 2.28+ perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare perf symbols: Don't try to find a vmlinux file when looking for kernel modules perf bench: Share some global variables to fix build with gcc 10 perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files perf env: Do not return pointers to local variables perf tests bp_account: Make global variable static | 15 March 2020, 19:50:15 UTC |
ffe6da9 | Linus Torvalds | 15 March 2020, 19:48:21 UTC | Merge tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix adding the missing time namespace adjustment in sys/sysinfo which caused sys/sysinfo to be inconsistent with /proc/uptime when read from a task inside a time namespace" * tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sys/sysinfo: Respect boottime inside time namespace | 15 March 2020, 19:48:21 UTC |
52ac377 | Linus Torvalds | 15 March 2020, 19:44:23 UTC | Merge tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two RAS related fixes: - Shut down the per CPU thermal throttling poll work properly when a CPU goes offline. The missing shutdown caused the poll work to be migrated to a unbound worker which triggered warnings about the usage of smp_processor_id() in preemptible context - Fix the PPIN feature initialization which missed to enable the functionality when PPIN_CTL was enabled but the MSR locked against updates" * tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix logic and comments around MSR_PPIN_CTL x86/mce/therm_throt: Undo thermal polling properly on CPU offline | 15 March 2020, 19:44:23 UTC |
b67775e | Linus Torvalds | 15 March 2020, 19:42:03 UTC | Merge tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Two EFI fixes: - Prevent a race and buffer overflow in the sysfs efivars interface which causes kernel memory corruption. - Add the missing NULL pointer checks in efivar_store_raw()" * tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Add a sanity check to efivar_store_raw() efi: Fix a race and a buffer overflow while reading efivars via sysfs | 15 March 2020, 19:42:03 UTC |
de28a65 | Linus Torvalds | 15 March 2020, 19:37:10 UTC | Merge tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Intel VT-d fixes: - RCU list handling fixes - Replace WARN_TAINT with pr_warn + add_taint for reporting firmware issues - DebugFS fixes - Fix for hugepage handling in iova_to_phys implementation - Fix for handling VMD devices, which have a domain number which doesn't fit into 16 bits - Warning message fix - MSI allocation fix for iommu-dma code - Sign-extension fix for io page-table code - Fix for AMD-Vi to properly update the is-running bit when AVIC is used * tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Populate debugfs if IOMMUs are detected iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE iommu/vt-d: Ignore devices with out-of-spec domain number iommu/vt-d: Fix the wrong printing in RHSA parsing iommu/vt-d: Fix debugfs register reads iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint iommu/vt-d: Silence RCU-list debugging warnings iommu/vt-d: Fix RCU-list bugs in intel_iommu_init() iommu/dma: Fix MSI reservation allocation iommu/io-pgtable-arm: Fix IOVA validation for 32-bit iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page iommu/vt-d: Fix RCU list debugging warnings | 15 March 2020, 19:37:10 UTC |
92c2275 | Thomas Gleixner | 15 March 2020, 09:53:11 UTC | Merge tag 'irqchip-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers | 15 March 2020, 09:53:11 UTC |
d3dca69 | Linus Torvalds | 14 March 2020, 22:53:48 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has quite some regression fixes this time. One is also related to watchdogs, we have proper acks from Guenter for them" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: acpi: put device when verifying client fails misc: eeprom: at24: fix regulator underflow i2c: gpio: suppress error on probe defer macintosh: windfarm: fix MODINFO regression i2c: designware-pci: Fix BUG_ON during device removal i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional watchdog: iTCO_wdt: Export vendorsupport | 14 March 2020, 22:53:48 UTC |
3086ae0 | Linus Torvalds | 14 March 2020, 22:49:09 UTC | Merge tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix __ALIGN_STR and __ALIGN to not use default junk padding - Misc Kconfig cleanups, header updates * tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: define __ALIGN_STR and __ALIGN symbols for ARC ARC: show_regs: reduce lines of output ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARC: fpu: fix randconfig build error reported by 0-day test service ARC: fix some Kconfig typos ARC: Cleanup old Kconfig IO scheduler options | 14 March 2020, 22:49:09 UTC |
6693075 | Linus Torvalds | 14 March 2020, 22:45:26 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Bugfixes for x86 and s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 KVM: s390: Also reset registers in sync regs for initial cpu reset KVM: fix Kconfig menu text for -Werror KVM: x86: remove stale comment from struct x86_emulate_ctxt KVM: x86: clear stale x86_emulate_ctxt->intercept value KVM: SVM: Fix the svm vmexit code for WRMSR KVM: X86: Fix dereference null cpufreq policy | 14 March 2020, 22:45:26 UTC |
1da8347 | Megha Dey | 14 March 2020, 03:39:59 UTC | iommu/vt-d: Populate debugfs if IOMMUs are detected Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not. Instead, populate the intel iommu debugfs directory if any IOMMUs are detected. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ee2636b8670b1 ("iommu/vt-d: Enable base Intel IOMMU debugfs support") Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 14 March 2020, 19:02:43 UTC |
69a4d0b | Linus Torvalds | 14 March 2020, 15:59:35 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A small collection of fixes. I'll make another sweep soon to look for more fixes for this -rc series. - Mark device node const in of_clk_get_parent APIs to ease landing changes in users later - Fix flag for Qualcomm SC7180 video clocks where we thought it would never turn off but actually hardware takes care of it - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because this clk is always on anyway - Correct some bad dt-binding numbers for i.MX8MN SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8mn: Fix incorrect clock defines clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk of: clk: Make of_clk_get_parent_{count,name}() parameter const | 14 March 2020, 15:59:35 UTC |
018cabb | Paolo Bonzini | 14 March 2020, 11:49:37 UTC | Merge branch 'kvm-null-pointer-fix' into kvm-master | 14 March 2020, 11:49:37 UTC |
95fa101 | Vitaly Kuznetsov | 09 March 2020, 15:52:11 UTC | KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter with EVMCS GPA = 0 the host crashes because the evmcs_gpa != vmx->nested.hv_evmcs_vmptr condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will happen on vmx->nested.hv_evmcs pointer dereference. Another problematic EVMCS ptr value is '-1' but it only causes host crash after nested_release_evmcs() invocation. The problem is exactly the same as with '0', we mistakenly think that the EVMCS pointer hasn't changed and thus nested.hv_evmcs_vmptr is valid. Resolve the issue by adding an additional !vmx->nested.hv_evmcs check to nested_vmx_handle_enlightened_vmptrld(), this way we will always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL and this is supposed to catch all invalid EVMCS GPAs. Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs() to be consistent with initialization where we don't currently set hv_evmcs_vmptr to '-1'. Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 March 2020, 11:49:27 UTC |
997224f | Paolo Bonzini | 14 March 2020, 10:59:08 UTC | Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fully do the CPU resets as intended With 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") we clarified the meaning of the reset ioctl to fully reset the CPU and not only the parts that can not be handled by userspace. Turns out that we missed some parts. | 14 March 2020, 10:59:08 UTC |
d01fd16 | Marc Zyngier | 11 March 2020, 11:56:49 UTC | irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2 Despite the architecture spec requiring that reserved registers in the GIC distributor memory map are RES0 (and thus are not allowed to generate an exception), the Cavium ThunderX (aka TX1) SoC explodes as such: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956 [ 0.000000] Hardware name: cavium,thunder-88xx (DT) [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 0.000000] pc : __raw_readl+0x0/0x8 [ 0.000000] lr : gic_init_bases+0x110/0x560 [ 0.000000] sp : ffff800011243d90 [ 0.000000] x29: ffff800011243d90 x28: 0000000000000000 [ 0.000000] x27: 0000000000000018 x26: 0000000000000002 [ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80 [ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68 [ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404 [ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010 [ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af [ 0.000000] x15: ffffffffffffffff x14: ffff800011249908 [ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4 [ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70 [ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828 [ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1 [ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000 [ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c [ 0.000000] Call trace: [ 0.000000] __raw_readl+0x0/0x8 [ 0.000000] gic_of_init+0x188/0x224 [ 0.000000] of_irq_init+0x200/0x3cc [ 0.000000] irqchip_init+0x1c/0x40 [ 0.000000] init_IRQ+0x160/0x1d0 [ 0.000000] start_kernel+0x2ec/0x4b8 [ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000) when reading the GICv4.1 GICD_TYPER2 register, which is unexpected... Work around it by adding a new quirk for the following variants: ThunderX: CN88xx OCTEON TX: CN83xx, CN81xx OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* and use this flag to avoid accessing GICD_TYPER2. Note that all reserved registers (including redistributors and ITS) are impacted by this erratum, but that only GICD_TYPER2 has to be worked around so far. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Robert Richter <rrichter@marvell.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org | 14 March 2020, 10:15:19 UTC |
0c22056 | Nitesh Narayan Lal | 13 March 2020, 13:16:24 UTC | KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect Previously all fields of structure kvm_lapic_irq were not initialized before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause an issue when any of those fields are used for processing a request. For example not initializing the msi_redir_hint field before passing to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of kvm_apic_map_get_dest_lapic(). This will specifically happen when the kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage value of msi_redir_hint, which should not happen as the request belongs to APIC fixed delivery mode and we do not want to deliver the interrupt only to the lowest priority candidate. This patch initializes all the fields of kvm_lapic_irq based on the values of ioapic redirect_entry object before passing it on to kvm_bitmap_or_dest_vcpus(). Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> [Set level to false since the value doesn't really matter. Suggested by Vitaly Kuznetsov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 March 2020, 09:46:01 UTC |
7a57c09 | Sean Christopherson | 12 March 2020, 18:04:16 UTC | KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1 is not supported[*], i.e. intercepting ENCLS to inject a #UD is unnecessary. Avoiding ENCLS-exiting even when it is reported as supported by the CPU works around a reported issue where SGX is "hard" disabled after an S3 suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control are enumerated as unsupported. While the root cause of the S3 issue is unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a workaround for what is most likely a hardware or firmware issue. As a bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and vmcs02. Note, SGX must be disabled in BIOS to take advantage of this workaround [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are cleared. Soft disabled meaning disabling SGX without clearing the primary CPUID bit (in leaf 0x7) and without poking into non-SGX CPU paths, e.g. for the VMCS controls. Fixes: 0b665d304028 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Reported-by: Toni Spets <toni.spets@iki.fi> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 March 2020, 09:34:51 UTC |
730ad0e | Suravee Suthikulpanit | 12 March 2020, 10:18:39 UTC | iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE Commit b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") accidentally left out the ir_data pointer when calling modity_irte_ga(), which causes the function amd_iommu_update_ga() to return prematurely due to struct amd_ir_data.ref is NULL and the "is_run" bit of IRTE does not get updated properly. This results in bad I/O performance since IOMMU AVIC always generate GA Log entry and notify IOMMU driver and KVM when it receives interrupt from the PCI pass-through device instead of directly inject interrupt to the vCPU. Fixes by passing ir_data when calling modify_irte_ga() as done previously. Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 14 March 2020, 08:39:11 UTC |
da72a37 | Daniel Drake | 12 March 2020, 06:09:55 UTC | iommu/vt-d: Ignore devices with out-of-spec domain number VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on: BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Fixes: 59ce0515cdaf3 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by: Joerg Roedel <jroedel@suse.de> | 14 March 2020, 08:38:39 UTC |
b0bb0c2 | Zhenzhong Duan | 12 March 2020, 06:09:54 UTC | iommu/vt-d: Fix the wrong printing in RHSA parsing When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894893cb ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by: Joerg Roedel <jroedel@suse.de> | 14 March 2020, 08:37:58 UTC |
fffb08b | Linus Torvalds | 13 March 2020, 23:39:19 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes, both in drivers: ipr and ufs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: Fix softlockup when rescanning devices in petitboot scsi: ufs: Fix possible unclocked access to auto hibern8 timer register | 13 March 2020, 23:39:19 UTC |
b0ea262 | Linus Torvalds | 13 March 2020, 22:21:32 UTC | Merge tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client bugfixes from Anna Schumaker: "These are mostly fscontext fixes, but there is also one that fixes collisions seen in fscache: - Ensure the fs_context has the correct fs_type when mounting and submounting - Fix leaking of ctx->nfs_server.hostname - Add minor version to fscache key to prevent collisions" * tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: nfs: add minor version to nfs_server_key for fscache NFS: Fix leak of ctx->nfs_server.hostname NFS: Don't hard-code the fs_type when submounting NFS: Ensure the fs_context has the correct fs_type before mounting | 13 March 2020, 22:21:32 UTC |
7e6d869 | Linus Torvalds | 13 March 2020, 22:19:38 UTC | Merge tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "Fix an Oops introduced in v5.4" * tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix stack use after return | 13 March 2020, 22:19:38 UTC |
2af8217 | Linus Torvalds | 13 March 2020, 22:17:21 UTC | Merge tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Fix three bugs introduced in this cycle" * tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix lockdep warning for async write ovl: fix some xino configurations ovl: fix lock in ovl_llseek() | 13 March 2020, 22:17:21 UTC |
78511ed | Linus Torvalds | 13 March 2020, 20:21:51 UTC | Merge tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix cpupower utility build failures with -fno-common enabled (Mike Gilbert)" * tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpupower: avoid multiple definition with gcc -fno-common | 13 March 2020, 20:21:51 UTC |
5007928 | Linus Torvalds | 13 March 2020, 20:00:08 UTC | Merge tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Just a single fix here, improving the RCU callback ordering from last week. After a bit more perusing by Paul, he poked a hole in the original" * tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block: io_uring: ensure RCU callback ordering with rcu_barrier() | 13 March 2020, 20:00:08 UTC |
17829c5 | Linus Torvalds | 13 March 2020, 19:45:23 UTC | Merge tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A few fixes that should go into this release. This contains: - Fix for a corruption issue with the s390 dasd driver (Stefan) - Fixup/improvement for the flush insertion change that we had in this series (Ming) - Fix for the partition suppor for host aware zoned devices (Shin'ichiro) - Fix incorrect blk-iocost comparison (Tejun) The diffstat looks large, but that's a) mostly dasd, and b) the flush fix from Ming adds a big comment" * tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block: block: Fix partition support for host aware zoned block devices blk-mq: insert flush request to the front of dispatch queue s390/dasd: fix data corruption for thin provisioned devices blk-iocost: fix incorrect vtime comparison in iocg_is_idle() | 13 March 2020, 19:45:23 UTC |
d365612 | Linus Torvalds | 13 March 2020, 19:21:10 UTC | Merge tag 'mmc-v5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix HW busy detection support for host controllers requiring the MMC_RSP_BUSY response flag (R1B) to be set for the command. In particular for CMD6 (eMMC), erase/trim/discard (SD/eMMC) and CMD5 (eMMC sleep). MMC host: - sdhci-omap|tegra: Fix support for HW busy detection" * tag 'mmc-v5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard mmc: core: Allow host controllers to require R1B for CMD6 | 13 March 2020, 19:21:10 UTC |
ddd2b85 | Jann Horn | 12 March 2020, 21:36:53 UTC | afs: Use kfree_rcu() instead of casting kfree() to rcu_callback_t afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong in theory, this might also blow up when people start enforcing function types via compiler instrumentation, and it means the rcu_head has to be first in struct afs_addr_list. Use kfree_rcu() instead, it's simpler and more correct. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2020, 17:47:33 UTC |
92bd1f2 | Wolfram Sang | 13 March 2020, 15:32:28 UTC | Merge tag 'at24-fixes-for-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.6-rc6 - fix regulator underflow bug introduced during the v5.6 merge window | 13 March 2020, 15:32:28 UTC |
c853680 | Miklos Szeredi | 13 March 2020, 14:42:20 UTC | ovl: fix lockdep warning for async write Lockdep reports "WARNING: lock held when returning to user space!" due to async write holding freeze lock over the write. Apparently aio.c already deals with this by lying to lockdep about the state of the lock. Do the same here. No need to check for S_IFREG() here since these file ops are regular-only. Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com Fixes: 2406a307ac7d ("ovl: implement async IO routines") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> | 13 March 2020, 14:53:06 UTC |
53afcd3 | Amir Goldstein | 21 February 2020, 14:34:42 UTC | ovl: fix some xino configurations Fix up two bugs in the coversion to xino_mode: 1. xino=off does not always end up in disabled mode 2. xino=auto on 32bit arch should end up in disabled mode Take a proactive approach to disabling xino on 32bit kernel: 1. Disable XINO_AUTO config during build time 2. Disable xino with a warning on mount time As a by product, xino=on on 32bit arch also ends up in disabled mode. We never intended to enable xino on 32bit arch and this will make the rest of the logic simpler. Fixes: 0f831ec85eda ("ovl: simplify ovl_same_sb() helper") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> | 13 March 2020, 14:53:06 UTC |
469ff20 | Peter Xu | 12 March 2020, 20:58:30 UTC | x86/vector: Remove warning on managed interrupt migration The vector management code assumes that managed interrupts cannot be migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE() which triggers when a managed interrupt vector association on a online CPU is cleared. The CPU offline code uses a different mechanism which cannot trigger this. This assumption is not longer correct because the new CPU isolation feature which affects the placement of managed interrupts must be able to move a managed interrupt away from an online CPU. There are two reasons why this can happen: 1) When the interrupt is activated the affinity mask which was established in irq_create_affinity_masks() is handed in to the vector allocation code. This mask contains all CPUs to which the interrupt can be made affine to, but this does not take the CPU isolation 'managed_irq' mask into account. When the interrupt is finally requested by the device driver then the affinity is checked again and the CPU isolation 'managed_irq' mask is taken into account, which moves the interrupt to a non-isolated CPU if possible. 2) The interrupt can be affine to an isolated CPU because the non-isolated CPUs in the calculated affinity mask are not online. Once a non-isolated CPU which is in the mask comes online the interrupt is migrated to this non-isolated CPU In both cases the regular online migration mechanism is used which triggers the WARN_ON_ONCE() in free_moved_vector(). Case #1 could have been addressed by taking the isolation mask into account, but that would require a massive code change in the activation logic and the eventual migration event was accepted as a reasonable tradeoff when the isolation feature was developed. But even if #1 would be addressed, #2 would still trigger it. Of course the warning in free_moved_vector() was overlooked at that time and the above two cases which have been discussed during patch review have obviously never been tested before the final submission. So keep it simple and remove the warning. [ tglx: Rewrote changelog and added a comment to free_moved_vector() ] Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com | 13 March 2020, 14:29:26 UTC |
8daee95 | Wolfram Sang | 12 March 2020, 13:32:44 UTC | i2c: acpi: put device when verifying client fails i2c_verify_client() can fail, so we need to put the device when that happens. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 13 March 2020, 14:15:30 UTC |
ba3b01d | Megha Dey | 09 March 2020, 20:09:46 UTC | iommu/vt-d: Fix debugfs register reads Commit 6825d3ea6cde ("iommu/vt-d: Add debugfs support to show register contents") dumps the register contents for all IOMMU devices. Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers, even though some of the registers are 32 bits, which is incorrect. Use the correct read function variant (dmar_readl/dmar_readq) while reading the contents of 32/64 bit registers respectively. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.com Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 13 March 2020, 13:25:46 UTC |
81ee85d | Hans de Goede | 09 March 2020, 18:25:10 UTC | iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f9a77 ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847 Signed-off-by: Joerg Roedel <jroedel@suse.de> | 13 March 2020, 13:25:45 UTC |
96788c7 | Hans de Goede | 09 March 2020, 14:01:38 UTC | iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") call, with a pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: f5a68bb0752e ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Cc: Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874 | 13 March 2020, 13:25:45 UTC |
5983369 | Hans de Goede | 09 March 2020, 14:01:37 UTC | iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894893c ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a95d50 ("iommu/vt-d: Parse ANDD records") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895 | 13 March 2020, 13:25:06 UTC |
0d81a3f | Linus Torvalds | 13 March 2020, 01:05:19 UTC | Merge tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "It's a bit quieter, probably not as much as it could be. There is on large regression fix in here from Lyude for displayport bandwidth calculations, there've been reports of multi-monitor in docks not working since -rc1 and this has been tested to fix those. Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu watermark + bios fixes, and an exynos iommu cleanup fix. core: - DP MST bandwidth regression fix. i915: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes exynos: - iommu object cleanup fix" ` * tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm: drm/dp_mst: Rewrite and fix bandwidth limit checks drm/dp_mst: Reprobe path resources in CSN handler drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant drm/i915: Defer semaphore priority bumping to a workqueue drm/i915/gt: Close race between cacheline_retire and free drm/i915/execlists: Enable timeslice on partial virtual engine dequeue drm/i915: be more solid in checking the alignment drm/i915/gvt: Fix dma-buf display blur issue on CFL drm/i915: Return early for await_start on same timeline drm/i915: Actually emit the await_start drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up drm/exynos: Fix cleanup of IOMMU related objects drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20 drm/amd/display: update soc bb for nv14 drm/i915/gvt: Fix emulated vbt size issue drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits | 13 March 2020, 01:05:19 UTC |
16b78f0 | Dave Airlie | 13 March 2020, 00:38:24 UTC | Merge tag 'topic/mst-bw-check-fixes-for-airlied-2020-03-12-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes UAPI Changes: None Cross-subsystem Changes: None Core Changes: Fixed regressions introduced by commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check"), which would cause us to: * Calculate the available bandwidth on an MST topology incorrectly, and as a result reject most display configurations that would try to enable more then one sink on a topology * Occasionally expose MST connectors to userspace before finishing probing their PBN capabilities, resulting in us rejecting display configurations because we assumed briefly that no bandwidth was available Driver Changes: None Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf16ee577567beed91c86b7d9cda3ec2e8c50a71.camel@redhat.com | 13 March 2020, 00:38:25 UTC |
f31d83f | Dave Airlie | 12 March 2020, 23:41:15 UTC | Merge tag 'drm-intel-fixes-2020-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc6: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfo6ksvw.fsf@intel.com | 12 March 2020, 23:41:30 UTC |
d944326 | Dave Airlie | 12 March 2020, 23:22:25 UTC | Merge tag 'amd-drm-fixes-5.6-2020-03-11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-11: amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200312020924.4161-1-alexander.deucher@amd.com | 12 March 2020, 23:22:28 UTC |
1b51f69 | Linus Torvalds | 12 March 2020, 23:19:19 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ... | 12 March 2020, 23:19:19 UTC |
047d4cd | Lyude Paul | 09 March 2020, 21:01:31 UTC | drm/dp_mst: Rewrite and fix bandwidth limit checks Sigh, this is mostly my fault for not giving commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") enough scrutiny during review. The way we're checking bandwidth limitations here is mostly wrong: For starters, drm_dp_mst_atomic_check_bw_limit() determines the pbn_limit of a branch by simply scanning each port on the current branch device, then uses the last non-zero full_pbn value that it finds. It then counts the sum of the PBN used on each branch device for that level, and compares against the full_pbn value it found before. This is wrong because ports can and will have different PBN limitations on many hubs, especially since a number of DisplayPort hubs out there will be clever and only use the smallest link rate required for each downstream sink - potentially giving every port a different full_pbn value depending on what link rate it's trained at. This means with our current code, which max PBN value we end up with is not well defined. Additionally, we also need to remember when checking bandwidth limitations that the top-most device in any MST topology is a branch device, not a port. This means that the first level of a topology doesn't technically have a full_pbn value that needs to be checked. Instead, we should assume that so long as our VCPI allocations fit we're within the bandwidth limitations of the primary MSTB. We do however, want to check full_pbn on every port including those of the primary MSTB. However, it's important to keep in mind that this value represents the minimum link rate /between a port's sink or mstb, and the mstb itself/. A quick diagram to explain: MSTB #1 / \ / \ Port #1 Port #2 full_pbn for Port #1 → | | ← full_pbn for Port #2 Sink #1 MSTB #2 | etc... Note that in the above diagram, the combined PBN from all VCPI allocations on said hub should not exceed the full_pbn value of port #2, and the display configuration on sink #1 should not exceed the full_pbn value of port #1. However, port #1 and port #2 can otherwise consume as much bandwidth as they want so long as their VCPI allocations still fit. And finally - our current bandwidth checking code also makes the mistake of not checking whether something is an end device or not before trying to traverse down it. So, let's fix it by rewriting our bandwidth checking helpers. We split the function into one part for handling branches which simply adds up the total PBN on each branch and returns it, and one for checking each port to ensure we're not going over its PBN limit. Phew. This should fix regressions seen, where we erroneously reject display configurations due to thinking they're going over our bandwidth limits when they're not. Changes since v1: * Took an even closer look at how PBN limitations are supposed to be handled, and did some experimenting with Sean Paul. Ended up rewriting these helpers again, but this time they should actually be correct! Changes since v2: * Small indenting fix * Fix pbn_used check in drm_dp_mst_atomic_check_port_bw_limit() Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Sean Paul <seanpaul@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309210131.1497545-1-lyude@redhat.com | 12 March 2020, 23:07:49 UTC |
87212b5 | Lyude Paul | 06 March 2020, 23:46:21 UTC | drm/dp_mst: Reprobe path resources in CSN handler We used to punt off reprobing path resources to the link address probe work, but now that we handle CSNs asynchronously from the driver's HPD handling we can do whatever the heck we want from the CSN! So, reprobe the path resources from drm_dp_mst_handle_conn_stat(). Also, get rid of the path resource reprobing code in drm_dp_check_and_send_link_address() since it's needlessly complicated when we already reprobe path resources from drm_dp_handle_link_address_port(). And finally, teach drm_dp_send_enum_path_resources() to return 1 on PBN changes so we know if we need to send another hotplug or not. This fixes issues where we've indicated to userspace that a port has just been connected, before we actually probed it's available PBN - something that results in unexpected atomic check failures. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-4-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> | 12 March 2020, 23:07:24 UTC |
fcf4638 | Lyude Paul | 06 March 2020, 23:46:20 UTC | drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks DisplayPort specifications are fun. For a while, it's been really unclear to us what available_pbn actually does. There's a somewhat vague explanation in the DisplayPort spec (starting from 1.2) that partially explains it: The minimum payload bandwidth number supported by the path. Each node updates this number with its available payload bandwidth number if its payload bandwidth number is less than that in the Message Transaction reply. So, it sounds like available_pbn represents the smallest link rate in use between the source and the branch device. Cool, so full_pbn is just the highest possible PBN that the branch device supports right? Well, we assumed that for quite a while until Sean Paul noticed that on some MST hubs, available_pbn will actually get set to 0 whenever there's any active payloads on the respective branch device. This caused quite a bit of confusion since clearing the payload ID table would end up fixing the available_pbn value. So, we just went with that until commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") started breaking people's setups due to us getting erroneous available_pbn values. So, we did some more digging and got confused until we finally looked at the definition for full_pbn: The bandwidth of the link at the trained link rate and lane count between the DP Source device and the DP Sink device with no time slots allocated to VC Payloads, represented as a Payload Bandwidth Number. As with the Available_Payload_Bandwidth_Number, this number is determined by the link with the lowest lane count and link rate. That's what we get for not reading specs closely enough, hehe. So, since full_pbn is definitely what we want for doing bandwidth restriction checks - let's start using that instead and ignore available_pbn entirely. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> | 12 March 2020, 23:07:24 UTC |
b2feb1d | Lyude Paul | 06 March 2020, 23:46:19 UTC | drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant It's already prefixed by dp_mst, so we don't really need to repeat ourselves here. One of the changes I should have picked up originally when reviewing MST DSC support. There should be no functional changes here Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Sean Paul <seanpaul@google.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-2-lyude@redhat.com | 12 March 2020, 23:07:19 UTC |
807f030 | Linus Torvalds | 12 March 2020, 22:51:26 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes for old crap in ->atomic_open() instances" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cifs_atomic_open(): fix double-put on late allocation failure gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache | 12 March 2020, 22:51:26 UTC |
c036859 | Colin Ian King | 12 March 2020, 15:04:30 UTC | net: systemport: fix index check to avoid an array out of bounds access Currently the bounds check on index is off by one and can lead to an out of bounds access on array priv->filters_loc when index is RXCHK_BRCM_TAG_MAX. Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 22:50:18 UTC |
9d0e0cd | Davide Caratti | 12 March 2020, 16:51:45 UTC | tc-testing: add ETS scheduler to tdc build configuration add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file to perform a full tdc run will encounter the following warning: ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully Fixes: 82c664b69c8b ("selftests: qdiscs: Add test coverage for ETS Qdisc") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 22:46:38 UTC |
611d779 | Heiner Kallweit | 12 March 2020, 21:25:20 UTC | net: phy: fix MDIO bus PM PHY resuming So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 22:36:12 UTC |
d9a9f48 | Al Viro | 12 March 2020, 22:25:20 UTC | cifs_atomic_open(): fix double-put on late allocation failure several iterations of ->atomic_open() calling conventions ago, we used to need fput() if ->atomic_open() failed at some point after successful finish_open(). Now (since 2016) it's not needed - struct file carries enough state to make fput() work regardless of the point in struct file lifecycle and discarding it on failure exits in open() got unified. Unfortunately, I'd missed the fact that we had an instance of ->atomic_open() (cifs one) that used to need that fput(), as well as the stale comment in finish_open() demanding such late failure handling. Trivially fixed... Fixes: fe9ec8291fca "do_last(): take fput() on error after opening to out:" Cc: stable@kernel.org # v4.7+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 12 March 2020, 22:25:20 UTC |
2103913 | Al Viro | 10 March 2020, 13:31:41 UTC | gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache with the way fs/namei.c:do_last() had been done, ->atomic_open() instances needed to recognize the case when existing file got found with O_EXCL|O_CREAT, either by falling back to finish_no_open() or failing themselves. gfs2 one didn't. Fixes: 6d4ade986f9c (GFS2: Add atomic_open support) Cc: stable@kernel.org # v3.11 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 12 March 2020, 22:21:24 UTC |
e4792ff | David S. Miller | 12 March 2020, 18:38:27 UTC | Merge branch 'hns3-fixes' Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes several bugfixes for the HNS3 ethernet driver. [patch 1] fixes an "tc qdisc del" failure. [patch 2] fixes SW & HW VLAN table not consistent issue. [patch 3] fixes a RMW issue related to VLAN filter switch. [patch 4] clears port based VLAN when uploading PF. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:38:27 UTC |
59359fc | Jian Shen | 12 March 2020, 07:11:06 UTC | net: hns3: clear port base VLAN when unload PF Currently, PF missed to clear the port base VLAN for VF when unload. In this case, the VLAN id will remain in the VLAN table. This patch fixes it. Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:38:26 UTC |
903b85d | Jian Shen | 12 March 2020, 07:11:05 UTC | net: hns3: fix RMW issue for VLAN filter switch According to the user manual, the ingress and egress VLAN filter are configured at the same time. Currently, hclge_init_vlan_config() and hclge_set_vlan_spoofchk() will both change the VLAN filter switch. So it's necessary to read the old configuration before modifying it. Fixes: 22044f95faa0 ("net: hns3: add support for spoof check setting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:38:26 UTC |
23b4201 | Jian Shen | 12 March 2020, 07:11:04 UTC | net: hns3: fix VF VLAN table entries inconsistent issue Currently, if VF is loaded on the host side, the host doesn't clear the VF's VLAN table entries when VF removing. In this case, when doing reset and disabling sriov at the same time the VLAN device over VF will be removed, but the VLAN table entries in hardware are remained. This patch fixes it by asking PF to clear the VLAN table entries for VF when VF is removing. It also clears the VLAN table full bit after VF VLAN table entries being cleared. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:38:26 UTC |
5eb01dd | Yonglong Liu | 12 March 2020, 07:11:03 UTC | net: hns3: fix "tc qdisc del" failed issue The HNS3 driver supports to configure TC numbers and TC to priority map via "tc" tool. But when delete the rule, will fail, because the HNS3 driver needs at least one TC, but the "tc" tool sets TC number to zero when delete. This patch makes sure that the TC number is at least one. Fixes: 30d240dfa2e8 ("net: hns3: Add mqprio hardware offload support in hns3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:38:26 UTC |
b09fe70 | Vinicius Costa Gomes | 09 March 2020, 17:39:53 UTC | taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 18:25:08 UTC |
3cc6e2c | Linus Torvalds | 12 March 2020, 16:59:36 UTC | Merge tag 'for-linus-5.6-2' of git://github.com/cminyard/linux-ipmi Pull IPMI fix from Corey Minyard: "Fix a message spew on some system The call to platform_get_irq() was changed to print a log if the interrupt was not available, and that was causing bogus messages to spew out for the IPMI driver. People have requested that this get in to 5.6 so I'm sending it along" * tag 'for-linus-5.6-2' of git://github.com/cminyard/linux-ipmi: ipmi_si: Avoid spurious errors for optional IRQs | 12 March 2020, 16:59:36 UTC |
2644bc8 | Linus Torvalds | 12 March 2020, 16:25:55 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a build problem with x86/curve25519" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/curve25519 - support assemblers with no adx support | 12 March 2020, 16:25:55 UTC |
531d304 | Amir Goldstein | 02 March 2020, 13:03:35 UTC | ovl: fix lock in ovl_llseek() ovl_inode_lock() is interruptible. When inode_lock() in ovl_llseek() was replaced with ovl_inode_lock(), we did not add a check for error. Fix this by making ovl_inode_lock() uninterruptible and change the existing call sites to use an _interruptible variant. Reported-by: syzbot+66a9752fa927f745385e@syzkaller.appspotmail.com Fixes: b1f9d3858f72 ("ovl: use ovl_inode_lock in ovl_llseek()") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> | 12 March 2020, 15:38:10 UTC |
b53df2e | Shin'ichiro Kawasaki | 21 February 2020, 01:37:08 UTC | block: Fix partition support for host aware zoned block devices Commit b72053072c0b ("block: allow partitions on host aware zone devices") introduced the helper function disk_has_partitions() to check if a given disk has valid partitions. However, since this function result directly depends on the disk partition table length rather than the actual existence of valid partitions in the table, it returns true even after all partitions are removed from the disk. For host aware zoned block devices, this results in zone management support to be kept disabled even after removing all partitions. Fix this by changing disk_has_partitions() to walk through the partition table entries and return true if and only if a valid non-zero size partition is found. Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: stable@vger.kernel.org # 5.5 Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 12 March 2020, 13:54:39 UTC |
cc3200e | Ming Lei | 12 March 2020, 09:15:48 UTC | blk-mq: insert flush request to the front of dispatch queue commit 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly") may change to add flush request to the tail of dispatch by applying the 'add_head' parameter of blk_mq_sched_insert_request. Turns out this way causes performance regression on NCQ controller because flush is non-NCQ command, which can't be queued when there is any in-flight NCQ command. When adding flush rq to the front of hctx->dispatch, it is easier to introduce extra time to flush rq's latency compared with adding to the tail of dispatch queue because of S_SCHED_RESTART, then chance of flush merge is increased, and less flush requests may be issued to controller. So always insert flush request to the front of dispatch queue just like before applying commit 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly"). Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 12 March 2020, 13:26:12 UTC |
5e6bdd3 | Stefan Haberland | 12 March 2020, 13:17:15 UTC | s390/dasd: fix data corruption for thin provisioned devices Devices are formatted in multiple of tracks. For an Extent Space Efficient (ESE) volume we get errors when accessing unformatted tracks. In this case the driver either formats the track on the flight for write requests or returns zero data for read requests. In case a request spans multiple tracks, the indication of an unformatted track presented for the first track is incorrectly applied to all tracks covered by the request. As a result, tracks containing data will be handled as empty, resulting in zero data being returned on read, or overwriting existing data with zero on write. Fix by determining the track that gets the NRF error. For write requests only format the track that is surely not formatted. For Read requests all tracks before have returned valid data and should not be touched. All tracks after the unformatted track might be formatted or not. Those are returned to the blocklayer to build a new request. When using alias devices there is a chance that multiple write requests trigger a format of the same track which might lead to data loss. Ensure that a track is formatted only once by maintaining a list of currently processed tracks. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 12 March 2020, 13:24:52 UTC |
f967140 | Kim Phillips | 11 March 2020, 19:13:21 UTC | perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com | 12 March 2020, 13:08:50 UTC |
18d2004 | Ulf Hansson | 11 March 2020, 09:20:36 UTC | mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command The busy timeout for the CMD5 to put the eMMC into sleep state, is specific to the card. Potentially the timeout may exceed the host->max_busy_timeout. If that becomes the case, mmc_sleep() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> | 12 March 2020, 12:36:55 UTC |
58d6fee | Michael Auchter | 10 March 2020, 20:58:40 UTC | misc: eeprom: at24: fix regulator underflow The at24 driver attempts to read a byte from the device to validate that it's actually present, and if not, disables the vcc regulator and returns -ENODEV. However, between the read and the error handling path, pm_runtime_idle() is called and invokes the driver's suspend callback, which also disables the vcc regulator. This leads to an underflow of the regulator enable count if the EEPROM is not present. Move the pm_runtime_suspend() call to be after the error handling path to resolve this. Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") Signed-off-by: Michael Auchter <michael.auchter@ni.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> | 12 March 2020, 08:02:34 UTC |
e1f550d | Chris Packham | 11 March 2020, 20:05:46 UTC | net: mvmdio: avoid error message for optional IRQ Per the dt-binding the interrupt is optional so use platform_get_irq_optional() instead of platform_get_irq(). Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() produces an error message orion-mdio f1072004.mdio: IRQ index 0 not found which is perfectly normal if one hasn't specified the optional property in the device tree. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 07:03:30 UTC |
012fc74 | Andrew Lunn | 11 March 2020, 20:02:31 UTC | net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register Only the bottom 12 bits contain the ATU bin occupancy statistics. The upper bits need masking off. Fixes: e0c69ca7dfbb ("net: dsa: mv88e6xxx: Add ATU occupancy via devlink resources") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 07:01:29 UTC |
06669ea | Eric Dumazet | 11 March 2020, 18:44:26 UTC | net: memcg: fix lockdep splat in inet_csk_accept() Locking newsk while still holding the listener lock triggered a lockdep splat [1] We can simply move the memcg code after we release the listener lock, as this can also help if multiple threads are sharing a common listener. Also fix a typo while reading socket sk_rmem_alloc. [1] WARNING: possible recursive locking detected 5.6.0-rc3-syzkaller #0 Not tainted -------------------------------------------- syz-executor598/9524 is trying to acquire lock: ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492 but task is already holding lock: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_INET6); lock(sk_lock-AF_INET6); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by syz-executor598/9524: #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline] #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445 stack backtrace: CPU: 0 PID: 9524 Comm: syz-executor598 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_deadlock_bug kernel/locking/lockdep.c:2370 [inline] check_deadlock kernel/locking/lockdep.c:2411 [inline] validate_chain kernel/locking/lockdep.c:2954 [inline] __lock_acquire.cold+0x114/0x288 kernel/locking/lockdep.c:3954 lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4484 lock_sock_nested+0xc5/0x110 net/core/sock.c:2947 lock_sock include/net/sock.h:1541 [inline] inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492 inet_accept+0xe9/0x7c0 net/ipv4/af_inet.c:734 __sys_accept4_file+0x3ac/0x5b0 net/socket.c:1758 __sys_accept4+0x53/0x90 net/socket.c:1809 __do_sys_accept4 net/socket.c:1821 [inline] __se_sys_accept4 net/socket.c:1818 [inline] __x64_sys_accept4+0x93/0xf0 net/socket.c:1818 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4445c9 Code: e8 0c 0d 03 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc35b37608 EFLAGS: 00000246 ORIG_RAX: 0000000000000120 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004445c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000306777 R09: 0000000000306777 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004053d0 R14: 0000000000000000 R15: 0000000000000000 Fixes: d752a4986532 ("net: memcg: late association of sock to memcg") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shakeel Butt <shakeelb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:57:33 UTC |
5e72b23 | David S. Miller | 12 March 2020, 06:52:32 UTC | Merge branch 's390-qeth-fixes' Julian Wiedmann says: ==================== s390/qeth: fixes 2020-03-11 please apply the following patch series for qeth to netdev's net tree. Just one fix to get the RX buffer pool resizing right, with two preparatory cleanups. This is on the larger side given where we are in the -rc cycle, but a big chunk of the delta is just refactoring to make the fix look nice. I intentionally split these off from yesterday's series. No objections if you'd rather punt them to net-next, the series should apply cleanly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:52:32 UTC |
5d4f785 | Julian Wiedmann | 11 March 2020, 17:07:11 UTC | s390/qeth: implement smarter resizing of the RX buffer pool The RX buffer pool is allocated in qeth_alloc_qdio_queues(). A subsequent pool resizing is then handled in a very simple way: first free the current pool, then allocate a new pool of the requested size. There's two ways where this can go wrong: 1. if the resize action happens _before_ the initial pool was allocated, then a subsequent initialization will call qeth_alloc_qdio_queues() and fill the pool with a second(!) set of pages. We consume twice the planned amount of memory. This is easy to fix - just skip the resizing if the queues haven't been allocated yet. 2. if the initial pool was created by qeth_alloc_qdio_queues() but a subsequent resizing fails, then the device has no(!) RX buffer pool. The next initialization will _not_ call qeth_alloc_qdio_queues(), and attempting to back the RX buffers with pages in qeth_init_qdio_queues() will fail. Not very difficult to fix either - instead of re-allocating the whole pool, just allocate/free as many entries to match the desired size. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:52:31 UTC |
0f75e14 | Julian Wiedmann | 11 March 2020, 17:07:10 UTC | s390/qeth: refactor buffer pool code In preparation for a subsequent fix, split out helpers to allocate/free individual pool entries. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:52:31 UTC |
f81649d | Julian Wiedmann | 11 March 2020, 17:07:09 UTC | s390/qeth: use page pointers to manage RX buffer pool The RX buffer elements are always backed with full pages, reflect this in the pointer type. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:52:31 UTC |
2677625 | Paolo Lungaroni | 11 March 2020, 16:54:06 UTC | seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number The Internet Assigned Numbers Authority (IANA) has recently assigned a protocol number value of 143 for Ethernet [1]. Before this assignment, encapsulation mechanisms such as Segment Routing used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated payload is an Ethernet frame. In this patch, we add the definition of the Ethernet protocol number to the kernel headers and update the SRv6 L2 tunnels to use it. [1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it> Acked-by: Ahmed Abdelsalam <ahmed.abdelsalam@gssi.it> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:49:30 UTC |
a20f997 | Andrew Lunn | 11 March 2020, 15:24:24 UTC | net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:46:11 UTC |
46e4c42 | Willem de Bruijn | 09 March 2020, 15:34:35 UTC | net/packet: tpacket_rcv: do not increment ring index on drop In one error case, tpacket_rcv drops packets after incrementing the ring producer index. If this happens, it does not update tp_status to TP_STATUS_USER and thus the reader is stalled for an iteration of the ring, causing out of order arrival. The only such error path is when virtio_net_hdr_from_skb fails due to encountering an unknown GSO type. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:12:16 UTC |
f3cc008 | Dominik Czarnota | 09 March 2020, 15:22:50 UTC | sxgbe: Fix off by one in samsung driver strncpy size arg This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in: strncmp(opt, "eee_timer:", 6) the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:". This bug doesn't seem to have any security impact since its present in module's cmdline parsing code. Signed-off-by: Dominik Czarnota <dominik.b.czarnota@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 06:07:34 UTC |
f9fc28a | Amol Grover | 12 March 2020, 05:34:20 UTC | net: caif: Add lockdep expression to RCU traversal primitive caifdevs->list is traversed using list_for_each_entry_rcu() outside an RCU read-side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning: [ 10.868467] ============================= [ 10.869082] WARNING: suspicious RCU usage [ 10.869817] 5.6.0-rc1-00177-g06ec0a154aae4 #1 Not tainted [ 10.870804] ----------------------------- [ 10.871557] net/caif/caif_dev.c:115 RCU-list traversed in non-reader section!! Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 05:55:25 UTC |
eecba79 | Jakub Kicinski | 11 March 2020, 23:37:02 UTC | MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer Remove Sathya Perla, sathya.perla@broadcom.com is bouncing. The driver has 3 more maintainers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 05:53:34 UTC |
ab14961 | Jakub Kicinski | 11 March 2020, 03:36:16 UTC | net: fec: validate the new settings in fec_enet_set_coalesce() fec_enet_set_coalesce() validates the previously set params and if they are within range proceeds to apply the new ones. The new ones, however, are not validated. This seems backwards, probably a copy-paste error? Compile tested only. Fixes: d851b47b22fc ("net: fec: add interrupt coalescence feature support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 March 2020, 05:40:26 UTC |
443d372 | Takashi Iwai | 05 February 2020, 09:31:46 UTC | ipmi_si: Avoid spurious errors for optional IRQs Although the IRQ assignment in ipmi_si driver is optional, platform_get_irq() spews error messages unnecessarily: ipmi_si dmi-ipmi-si.0: IRQ index 0 not found Fix this by switching to platform_get_irq_optional(). Cc: stable@vger.kernel.org # 5.4.x Cc: John Donnelly <john.p.donnelly@oracle.com> Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") Reported-and-tested-by: Patrick Vo <patrick.vo@hpe.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-Id: <20200205093146.1352-1-tiwai@suse.de> Signed-off-by: Corey Minyard <cminyard@mvista.com> | 12 March 2020, 02:15:19 UTC |
e3c3b6e | Dave Airlie | 12 March 2020, 01:02:46 UTC | Merge tag 'exynos-drm-fixes-for-v5.6-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fix IOMMU initialization failure when Exynos DRM driver is rebound, and also fix memory leak to iommu mapping object, which was detected by kmemleak detector. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1583887109-4148-1-git-send-email-inki.dae@samsung.com | 12 March 2020, 01:02:52 UTC |
14a0d52 | Chris Wilson | 10 March 2020, 10:17:20 UTC | drm/i915: Defer semaphore priority bumping to a workqueue Since the semaphore fence may be signaled from inside an interrupt handler from inside a request holding its request->lock, we cannot then enter into the engine->active.lock for processing the semaphore priority bump as we may traverse our call tree and end up on another held request. CPU 0: [ 2243.218864] _raw_spin_lock_irqsave+0x9a/0xb0 [ 2243.218867] i915_schedule_bump_priority+0x49/0x80 [i915] [ 2243.218869] semaphore_notify+0x6d/0x98 [i915] [ 2243.218871] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2243.218874] ? kmem_cache_free+0x211/0x290 [ 2243.218876] i915_sw_fence_complete+0x58/0x80 [i915] [ 2243.218879] dma_i915_sw_fence_wake+0x3e/0x80 [i915] [ 2243.218881] signal_irq_work+0x571/0x690 [i915] [ 2243.218883] irq_work_run_list+0xd7/0x120 [ 2243.218885] irq_work_run+0x1d/0x50 [ 2243.218887] smp_irq_work_interrupt+0x21/0x30 [ 2243.218889] irq_work_interrupt+0xf/0x20 CPU 1: [ 2242.173107] _raw_spin_lock+0x8f/0xa0 [ 2242.173110] __i915_request_submit+0x64/0x4a0 [i915] [ 2242.173112] __execlists_submission_tasklet+0x8ee/0x2120 [i915] [ 2242.173114] ? i915_sched_lookup_priolist+0x1e3/0x2b0 [i915] [ 2242.173117] execlists_submit_request+0x2e8/0x2f0 [i915] [ 2242.173119] submit_notify+0x8f/0xc0 [i915] [ 2242.173121] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2242.173124] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 2242.173137] i915_sw_fence_complete+0x58/0x80 [i915] [ 2242.173140] i915_sw_fence_commit+0x16/0x20 [i915] Closes: https://gitlab.freedesktop.org/drm/intel/issues/1318 Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310101720.9944-1-chris@chris-wilson.co.uk (cherry picked from commit 209df10bb4536c81c2540df96c02cd079435357f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:39 UTC |
8ea6bb8 | Chris Wilson | 06 March 2020, 15:46:47 UTC | drm/i915/gt: Close race between cacheline_retire and free If the cacheline may still be busy, atomically mark it for future release, and only if we can determine that it will never be used again, immediately free it. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1392 Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20200306154647.3528345-1-chris@chris-wilson.co.uk (cherry picked from commit 2d4bd971f5baa51418625f379a69f5d58b5a0450) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:39 UTC |
eafc2aa | Chris Wilson | 06 March 2020, 11:30:10 UTC | drm/i915/execlists: Enable timeslice on partial virtual engine dequeue If we stop filling the ELSP due to an incompatible virtual engine request, check if we should enable the timeslice on behalf of the queue. This fixes the case where we are inspecting the last->next element when we know that the last element is the last request in the execution queue, and so decided we did not need to enable timeslicing despite the intent to do so! Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk (cherry picked from commit 3df2deed411e0f1b7312baf0139aab8bba4c0410) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:39 UTC |
1d61c5d | Matthew Auld | 05 March 2020, 20:35:34 UTC | drm/i915: be more solid in checking the alignment The alignment is u64, and yet is_power_of_2() assumes unsigned long, which might give different results between 32b and 64b kernel. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com Cc: stable@vger.kernel.org (cherry picked from commit 2920516b2f719546f55079bc39a7fe409d9e80ab) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:39 UTC |
259170c | Tina Zhang | 27 February 2020, 01:00:41 UTC | drm/i915/gvt: Fix dma-buf display blur issue on CFL Commit c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") added the support on CFL. The vgpu emulation hotplug support on CFL was supposed to be included in that patch. Without the vgpu emulation hotplug support, the dma-buf based display gives us a blur face. So fix this issue by adding the vgpu emulation hotplug support on CFL. Fixes: c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com (cherry picked from commit 135dde8853c7e00f6002e710f7e4787ed8585c0e) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:39 UTC |
c951b0a | Chris Wilson | 05 March 2020, 13:48:22 UTC | drm/i915: Return early for await_start on same timeline Requests within a timeline are ordered by that timeline, so awaiting for the start of a request within the timeline is a no-op. This used to work by falling out of the mutex_trylock() as the signaler and waiter had the same timeline and not returning an error. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk (cherry picked from commit ab7a69020fb5d5c7ba19fba60f62fd6f9ca9f779) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:38 UTC |
c67b35d | Chris Wilson | 05 March 2020, 10:42:10 UTC | drm/i915: Actually emit the await_start Fix the inverted test to emit the wait on the end of the previous request if we /haven't/ already. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk (cherry picked from commit 07e9c59d63df6a1c44c1975c01827ba18b69270a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 March 2020, 21:12:38 UTC |
7395f62 | Nathan Chancellor | 10 March 2020, 22:06:54 UTC | dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning: converting the result of '?:' with integer constants to a boolean always evaluates to 'true' [-Wtautological-constant-compare] return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, ^ drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded from macro 'DPAA_FD_DATA_ALIGNMENT' \#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) ^ 1 warning generated. This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") even though it appears to have been an issue since the introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero. Just replace the whole boolean expression with the true branch, as it is always been true. Link: https://github.com/ClangBuiltLinux/linux/issues/928 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2020, 20:36:56 UTC |
e6e6ec4 | Linus Torvalds | 11 March 2020, 20:35:34 UTC | Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fscrypt fix from Eric Biggers: "Fix a bug where if userspace is writing to encrypted files while the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (introduced in v5.4) is running, dirty inodes could be evicted, causing writes could be lost or the filesystem to hang due to a use-after-free. This was encountered during real-world use, not just theoretical. Tested with the existing fscrypt xfstests, and with a new xfstest I wrote to reproduce this bug. This fix does expose an existing bug with '-o lazytime' that Ted is working on fixing, but this fix is more critical and needed anyway regardless of the lazytime fix" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: don't evict dirty inodes after removing key | 11 March 2020, 20:35:34 UTC |
f2df8ce | David S. Miller | 11 March 2020, 19:29:03 UTC | Merge tag 'mac80211-for-net-2020-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * three netlink validation fixes * a mesh path selection fix ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 11 March 2020, 19:29:03 UTC |
8d92e99 | Eugeniy Paltsev | 11 March 2020, 16:26:43 UTC | ARC: define __ALIGN_STR and __ALIGN symbols for ARC The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> | 11 March 2020, 17:07:15 UTC |
204c7ec | Vineet Gupta | 04 March 2020, 06:10:01 UTC | ARC: show_regs: reduce lines of output Before ------ | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | | [ECR ]: 0x00090000 => | [EFA ]: 0x00000000 | [ERET ]: 0x2004aa6c | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | [STAT32]: 0x80080a82 [IE U ] | BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 After ----- | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c | STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18 | BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> | 11 March 2020, 17:07:13 UTC |