Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
ed30a4a Linus Torvalds 21 April 2024, 19:35:54 UTC Linux 6.9-rc5 21 April 2024, 19:35:54 UTC
48cf398 Linus Torvalds 21 April 2024, 17:32:58 UTC Merge tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.9-rc5. Included in here are the following: - binder driver fix for reported problem - speakup crash fix - mei driver fixes for reported problems - comdei driver fix - interconnect driver fixes - rtsx driver fix - peci.h kernel doc fix All of these have been in linux-next for over a week with no reported problems" * tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: peci: linux/peci.h: fix Excess kernel-doc description warning binder: check offset alignment in binder_get_object() comedi: vmk80xx: fix incomplete endpoint checking mei: vsc: Unregister interrupt handler for system suspend Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" misc: rtsx: Fix rts5264 driver status incorrect when card removed mei: me: disable RPL-S on SPS and IGN firmwares speakup: Avoid crash on very long word interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM 21 April 2024, 17:32:58 UTC
4e90ba7 Linus Torvalds 21 April 2024, 17:30:21 UTC Merge tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull kernfs bugfix and documentation update from Greg KH: "Here are two changes for 6.9-rc5 that deal with "driver core" stuff, that do the following: - sysfs reference leak fix - embargoed-hardware-issues.rst update for Power Both of these have been in linux-next for over a week with no reported issues" * tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for Power fs: sysfs: Fix reference leak in sysfs_break_active_protection() 21 April 2024, 17:30:21 UTC
c0c6b5c Linus Torvalds 21 April 2024, 17:27:01 UTC Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.9-rc5 that resolve a bunch of reported problems. Included in here are: - MAINTAINERS and .mailmap update for Richard Genoud - serial core regression fixes from 6.9-rc1 changes - pci id cleanups - serial core crash fix - stm32 driver fixes - 8250 driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: Reset .throttled state in .startup() serial: stm32: Return IRQ_NONE in the ISR if no handling happend serial: core: Fix missing shutdown and startup for serial base port serial: core: Clearing the circular buffer before NULLifying it MAINTAINERS: mailmap: update Richard Genoud's email address serial/pmac_zilog: Remove flawed mitigation for rx irq flood serial: 8250_pci: Remove redundant PCI IDs serial: core: Fix regression when runtime PM is not enabled serial: mxs-auart: add spinlock around changing cts state serial: 8250_dw: Revert: Do not reclock if already at correct rate serial: 8250_lpc18xx: disable clks on error in probe() 21 April 2024, 17:27:01 UTC
5fa0ab4 Linus Torvalds 21 April 2024, 17:23:27 UTC Merge tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5. Included in here are: - MAINTAINER file update for invalid email address - usb-serial device id updates - typec driver fixes - thunderbolt / usb4 driver fixes - usb core shutdown fixes - cdc-wdm driver revert for reported problem in -rc1 - usb gadget driver fixes - xhci driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Telit FN920C04 rmnet compositions usb: dwc3: ep0: Don't reset resource alloc flag Revert "usb: cdc-wdm: close race between read and workqueue" USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants usb: misc: onboard_usb_hub: Disable the USB hub clock on failure thunderbolt: Avoid notify PM core about runtime PM resume thunderbolt: Fix wake configurations after device unplug usb: dwc2: host: Fix dereference issue in DDMA completion flow. usb: typec: mux: it5205: Fix ChipID value typo MAINTAINERS: Drop Li Yang as their email address stopped working usb: gadget: fsl: Initialize udc before using it usb: Disable USB3 LPM at shutdown usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error usb: typec: tcpm: Correct the PDO counting in pd_set usb: gadget: functionfs: Wait for fences before enqueueing DMABUF usb: gadget: functionfs: Fix inverted DMA fence direction ... 21 April 2024, 17:23:27 UTC
3b68086 Linus Torvalds 21 April 2024, 16:39:36 UTC Merge tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Add a missing memory barrier in the concurrency ID mm switching * tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Add missing memory barrier in switch_mm_cid 21 April 2024, 16:39:36 UTC
d07a0b8 Linus Torvalds 21 April 2024, 16:36:12 UTC Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ - Print the correct error code when FRED reports a bad event type - Add a FRED-specific INT80 handler without the special dances that need to happen in the current one - Enable the using-the-default-return-thunk-but-you-should-not warning only on configs which actually enable those special return thunks - Check the proper feature flags when selecting BHI retpoline mitigation * tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ x86/fred: Fix incorrect error code printout in fred_bad_type() x86/fred: Fix INT80 emulation for FRED x86/retpolines: Enable the default thunk warning only on relevant configs x86/bugs: Fix BHI retpoline check 21 April 2024, 16:36:12 UTC
977b1ef Linus Torvalds 20 April 2024, 18:28:02 UTC Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linux Pull block fixes from Jens Axboe: "Just two minor fixes that should go into the 6.9 kernel release, one fixing a regression with partition scanning errors, and one fixing a WARN_ON() that can get triggered if we race with a timer" * tag 'block-6.9-20240420' of git://git.kernel.dk/linux: blk-iocost: do not WARN if iocg was already offlined block: propagate partition scanning errors to the BLKRRPART ioctl 20 April 2024, 18:28:02 UTC
39316e5 Linus Torvalds 20 April 2024, 18:17:22 UTC Merge tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull email address update from James Bottomley: "My IBM email has stopped working, so update to a working email address" * tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: update to working email address 20 April 2024, 18:17:22 UTC
8177722 Linus Torvalds 20 April 2024, 18:10:51 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "This is a bit on the large side, mostly due to two changes: - Changes to disable some broken PMU virtualization (see below for details under "x86 PMU") - Clean up SVM's enter/exit assembly code so that it can be compiled without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched return thunk in use. This should not happen!" when running KVM selftests. Everything else is small bugfixes and selftest changes: - Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM would allow userspace to refresh the cache with a bogus GPA. The bug has existed for quite some time, but was exposed by a new sanity check added in 6.9 (to ensure a cache is either GPA-based or HVA-based). - Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left behind during a 6.9 cleanup. - Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow (detected by KASAN). - Fix a bug where KVM incorrectly clears root_role.direct when userspace sets guest CPUID. - Fix a dirty logging bug in the where KVM fails to write-protect SPTEs used by a nested guest, if KVM is using Page-Modification Logging and the nested hypervisor is NOT using EPT. x86 PMU: - Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. - Set the enable bits for general purpose counters in PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD processors. - Disable LBR virtualization on CPUs that don't support LBR callstacks, as KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and would fail on such CPUs. Tests: - Fix a flaw in the max_guest_memory selftest that results in it exhausting the supply of ucall structures when run with more than 256 vCPUs. - Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start() KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}() KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks perf/x86/intel: Expose existence of callback support to KVM KVM: VMX: Snapshot LBR capabilities during module initialization KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run() KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run() KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding KVM: SVM: Remove a useless zeroing of allocated memory ... 20 April 2024, 18:10:51 UTC
e43afae Linus Torvalds 20 April 2024, 18:06:42 UTC Merge tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix wireguard loading failure on pre-Power10 due to Power10 crypto routines - Fix papr-vpd selftest failure due to missing variable initialization - Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev() Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan Lynch, and Shivaprasad G Bhat. * tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc/papr-vpd: Fix missing variable initialization powerpc/crypto/chacha-p10: Fix failure on non Power10 powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev() 20 April 2024, 18:06:42 UTC
560d4e7 Linus Torvalds 20 April 2024, 17:36:02 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple clk driver fixes, a build fix, and a deadlock fix: - Mediatek mt7988 has broken PCIe because the wrong parent is used - Mediatek clk drivers may deadlock when registering their clks because the clk provider device is repeatedly runtime PM resumed and suspended during probe and clk registration. Resuming the clk provider device deadlocks with an ABBA deadlock due to genpd_lock and the clk prepare_lock. The fix is to keep the device runtime resumed while registering clks. - Another runtime PM related deadlock, this time with disabling unused clks during late init. We get an ABBA deadlock where a device is runtime PM resuming (or suspending) while the disabling of unused clks is happening in parallel. That runtime PM action calls into the clk framework and tries to grab the clk prepare_lock while the disabling of unused clks holds the prepare_lock and is waiting for that runtime PM action to complete. The fix is to runtime resume all the clk provider devices before grabbing the clk prepare_lock during disable unused. - A build fix to provide an empty devm_clk_rate_exclusive_get() function when CONFIG_COMMON_CLK=n" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port clk: mediatek: Do a runtime PM get on controllers during probe clk: Get runtime PM before walking tree for clk_summary clk: Get runtime PM before walking tree during disable_unused clk: Initialize struct clk_core kref earlier clk: Don't hold prepare_lock when calling kref_put() clk: Remove prepare_lock hold assertion in __clk_release() clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get() 20 April 2024, 17:36:02 UTC
366c5ce James Bottomley 20 April 2024, 12:34:09 UTC MAINTAINERS: update to working email address jejb@linux.ibm.com no longer works. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 20 April 2024, 12:34:09 UTC
13a2e42 Linus Torvalds 19 April 2024, 23:34:10 UTC Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes: - Fix perf annotate TUI when used with data type profiling - Work around BPF verifier about sighand lock checking And a set of kernel header synchronization" * tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools/include: Sync arm64 asm/cputype.h with the kernel sources tools/include: Sync asm-generic/bitops/fls.h with the kernel sources tools/include: Sync x86 asm/msr-index.h with the kernel sources tools/include: Sync x86 asm/irq_vectors.h with the kernel sources tools/include: Sync x86 CPU feature headers with the kernel sources tools/include: Sync uapi/sound/asound.h with the kernel sources tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources tools/include: Sync uapi/linux/fs.h with the kernel sources tools/include: Sync uapi/drm/i915_drm.h with the kernel sources perf lock contention: Add a missing NULL check perf annotate: Make sure to call symbol__annotate2() in TUI 19 April 2024, 23:34:10 UTC
2d41226 Linus Torvalds 19 April 2024, 21:10:11 UTC Merge tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Correctly disable UBSAN configs in configs/hardening (Nathan Chancellor) - Add missing signed integer overflow trap types to arm64 handler * tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ubsan: Add awareness of signed integer overflow traps configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP configs/hardening: Fix disabling UBSAN configurations 19 April 2024, 21:10:11 UTC
50a1317 Linus Torvalds 19 April 2024, 21:02:21 UTC Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "Two fixes for the selftests: - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work - The kconfig fragment sshould include fault injection so the fault injection test can work" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Add config needed for iommufd_fail_nth iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest 19 April 2024, 21:02:21 UTC
2bf5dd7 Linus Torvalds 19 April 2024, 20:46:44 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: - Add a missing mutex_destroy() in rxe - Enhance the debugging print for cm_destroy failures to help debug these - Fix mlx5 MAD processing in cases where multiport devices are running in switchedev mode * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix port number for counter query in multi-port configuration RDMA/cm: Print the old state when cm_destroy_id gets timeout RDMA/rxe: Fix the problem "mutex_destroy missing" 19 April 2024, 20:46:44 UTC
46b2850 Linus Torvalds 19 April 2024, 20:36:28 UTC Merge tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull fs/9p fixes from Eric Van Hensbergen: "This contains a reversion of one of the original 6.9 patches which seems to have been the cause of most of the instability. It also incorporates several fixes to legacy support and cache fixes. There are few additional changes to improve stability, but I want another week of testing before sending them upstream" * tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: drop inodes immediately on non-.L too fs/9p: Revert "fs/9p: fix dups even in uncached mode" fs/9p: remove erroneous nlink init from legacy stat2inode 9p: explicitly deny setlease attempts fs/9p: fix the cache always being enabled on files with qid flags fs/9p: translate O_TRUNC into OTRUNC fs/9p: only translate RWX permissions for plain 9P2000 19 April 2024, 20:36:28 UTC
daa7577 Linus Torvalds 19 April 2024, 20:16:10 UTC Merge tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: - Fix two bugs in the new passthrough mode - Fix a statx bug introduced in v6.6 - Fix code documentation * tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: cuse: add kernel-doc comments to cuse_process_init_reply() fuse: fix leaked ENOSYS error on first statx call fuse: fix parallel dio write on file open in passthrough mode fuse: fix wrong ff->iomode state changes from parallel dio write 19 April 2024, 20:16:10 UTC
25ec51e Linus Torvalds 19 April 2024, 20:04:21 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix a kernel fault during page table walking in huge_pte_alloc() with PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc() - head.S fix and cleanup to disable the MMU before toggling the HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI stub. Changing this bit (currently from VHE to nVHE) causes some system registers as well as page table descriptors to be interpreted differently, potentially resulting in spurious MMU faults - Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP memory ranges due to kernel_page_present() returning true in most configurations other than rodata_full == true, CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hibernate: Fix level3 translation fault in swsusp_save() arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H arm64/head: Drop unnecessary pre-disable-MMU workaround arm64/hugetlb: Fix page table walk in huge_pte_alloc() 19 April 2024, 20:04:21 UTC
3cdb455 Linus Torvalds 19 April 2024, 16:59:15 UTC Merge tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix NULL pointer dereference in program check handler - Fake IRBs are important events relevant for problem analysis. Add traces when queueing and delivering - Fix a race condition in ccw_device_set_online() that can cause the online process to fail - Deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as an error, resulting in a failed QDIO setup. Fix that by retrying the setup when a cc1 response is received * tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: Fix NULL pointer dereference s390/cio: log fake IRB events s390/cio: fix race condition during online processing s390/qdio: handle deferred cc1 19 April 2024, 16:59:15 UTC
9c6e84e Linus Torvalds 19 April 2024, 16:52:09 UTC Merge tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig fixes from Masami Hiramatsu: - Fix potential static_command_line buffer overrun. Currently we allocate the memory for static_command_line based on "boot_command_line", but it will copy "command_line" into it. So we use the length of "command_line" instead of "boot_command_line" (as we previously did) - Use memblock_free_late() in xbc_exit() instead of memblock_free() after the buddy system is initialized - Fix a kerneldoc warning * tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Fix the kerneldoc of _xbc_exit() bootconfig: use memblock_free_late to free xbc memory to buddy init/main.c: Fix potential static_command_line memory overflow 19 April 2024, 16:52:09 UTC
dbe0a7b Linus Torvalds 19 April 2024, 16:41:57 UTC Merge tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "This prevents the thermal debug code from attempting to divide by zero and corrects trip point statistics (Rafael Wysocki)" * tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up() 19 April 2024, 16:41:57 UTC
3c08ab6 Linus Torvalds 19 April 2024, 16:29:51 UTC Merge tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Things look calm and normal, we got handful HD-audio-related small fixes and a fix for MIDI 2.0 UMP handling" * tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4 ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 ALSA: hda/tas2781: correct the register for pow calibrated data ALSA: hda/realtek: Add quirk for HP SnowWhite laptops 19 April 2024, 16:29:51 UTC
ce944f3 Linus Torvalds 19 April 2024, 16:21:25 UTC Merge tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "Regular week of fixes, seems to be about right for this time in the release cycle, amdgpu, and nouveau are the main one with some scattered fixes otherwise. ttm: - Stop pooling cached NUMA pages amdgpu: - Fix invalid resource->start check - USB-C DSC fix - Fix a potential UAF in VA IOCTL - Fix visible VRAM handling during faults amdkfd: - Fix memory leak in create_process failure radeon: - Silence UBSAN warnings from variable sized arrays nouveau: - dp: Don't probe DP ports twice - nv04: Fix OOB access - nv50: Disable AUX bus for disconnected DP ports - nvkm: Fix instmem race condition panel: - Don't unregister DSI devices in several drivers v3d: - Fix enabled_ns increment xe: - Fix bo leak on error path during fb init - Fix use-after-free due to order vm is put and destroyed" * tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel: drm/radeon: silence UBSAN warning (v3) drm/radeon: make -fstrict-flex-arrays=3 happy drm/amdgpu: fix visible VRAM handling during faults drm/amdgpu: validate the parameters of bo mapping operations more clearly Revert "drm/amd/display: fix USB-C flag update after enc10 feature init" drm/amdkfd: Fix memory leak in create_process failure drm/amdgpu: remove invalid resource->start check v2 drm/xe/vm: prevent UAF with asid based lookup drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init drm/panel: novatek-nt36682e: don't unregister DSI device drm/panel: visionox-rm69299: don't unregister DSI device drm/nouveau/dp: Don't probe eDP ports twice harder drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports drm/v3d: Don't increment `enabled_ns` twice drm/vmwgfx: Sort primary plane formats by order of preference drm/vmwgfx: Fix crtc's atomic check conditional drm/vmwgfx: Fix prime import/export drm/ttm: stop pooling cached NUMA pages v2 drm: nv04: Fix out of bounds access nouveau: fix instmem race condition around ptr stores 19 April 2024, 16:21:25 UTC
54c2354 Linus Torvalds 19 April 2024, 16:13:35 UTC Merge tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues or aren't considered suitable for backporting. There are a significant number of fixups for this cycle's page_owner changes (series "page_owner: print stacks and their outstanding allocations"). Apart from that, singleton changes all over, mainly in MM" * tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: nilfs2: fix OOB in nilfs_set_de_type MAINTAINERS: update Naoya Horiguchi's email address fork: defer linking file vma until vma is fully initialized mm/shmem: inline shmem_is_huge() for disabled transparent hugepages mm,page_owner: defer enablement of static branch Squashfs: check the inode number is not the invalid value of zero mm,swapops: update check in is_pfn_swap_entry for hwpoison entries mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled mm/userfaultfd: allow hugetlb change protection upon poison entry mm,page_owner: fix printing of stack records mm,page_owner: fix accounting of pages when migrating mm,page_owner: fix refcount imbalance mm,page_owner: update metadata for tail pages userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly 19 April 2024, 16:13:35 UTC
50449ca Yaxiong Tian 17 April 2024, 02:52:48 UTC arm64: hibernate: Fix level3 translation fault in swsusp_save() On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n: Unable to handle kernel paging request at virtual address ffffff8000000000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000 [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76 Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0 Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021 pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : swsusp_save+0x280/0x538 lr : swsusp_save+0x280/0x538 sp : ffffffa034a3fa40 x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000 x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000 x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2 x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000 x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666 x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e Call trace: swsusp_save+0x280/0x538 swsusp_arch_suspend+0x148/0x190 hibernation_snapshot+0x240/0x39c hibernate+0xc4/0x378 state_store+0xf0/0x10c kobj_attr_store+0x14/0x24 The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation. This problem was introduced by changes to the pfn_valid() logic in commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()"). Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages. Fixes: a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()") Cc: <stable@vger.kernel.org> # 5.14.x Suggested-by: Mike Rapoport <rppt@kernel.org> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Co-developed-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn [catalin.marinas@arm.com: rework commit message] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 19 April 2024, 15:33:00 UTC
7a9a304 Greg Kroah-Hartman 19 April 2024, 14:07:18 UTC Merge tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.9-rc5 Here are some new modem device ids for 6.9-rc5. All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 rmnet compositions USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants 19 April 2024, 14:07:18 UTC
01bc4fd Li Nan 19 April 2024, 09:32:57 UTC blk-iocost: do not WARN if iocg was already offlined In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which is intended to confirm iocg is active when it has debt. However, warn can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn() is run at that time: WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190 Call trace: iocg_pay_debt+0x14c/0x190 iocg_kick_waitq+0x438/0x4c0 iocg_waitq_timer_fn+0xd8/0x130 __run_hrtimer+0x144/0x45c __hrtimer_run_queues+0x16c/0x244 hrtimer_interrupt+0x2cc/0x7b0 The warn in this situation is meaningless. Since this iocg is being removed, the state of the 'active_list' is irrelevant, and 'waitq_timer' is canceled after removing 'active_list' in ioc_pd_free(), which ensures iocg is freed after iocg_waitq_timer_fn() returns. Therefore, add the check if iocg was already offlined to avoid warn when removing a blkcg or disk. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 19 April 2024, 14:06:24 UTC
b552f63 Rafael J. Wysocki 15 April 2024, 19:02:12 UTC thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up() The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 19 April 2024, 13:08:19 UTC
f25f17d Takashi Iwai 19 April 2024, 10:04:39 UTC ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages The conversion from MIDI2 to MIDI1 UMP messages had a leftover artifact (superfluous bit shift), and this resulted in the bogus type check, leading to empty outputs. Let's fix it. Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events") Cc: <stable@vger.kernel.org> Link: https://github.com/alsa-project/alsa-utils/issues/262 Message-ID: <20240419100442.14806-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 19 April 2024, 10:07:14 UTC
7ee5faa Ai Chao 19 April 2024, 08:21:59 UTC ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset, the line out and internal speaker until ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied. Signed-off-by: Ai Chao <aichao@kylinos.cn> Cc: <stable@vger.kernel.org> Message-ID: <20240419082159.476879-1-aichao@kylinos.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> 19 April 2024, 10:00:57 UTC
52c8b6e Dave Airlie 19 April 2024, 00:40:04 UTC Merge tag 'drm-xe-fixes-2024-04-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix bo leak on error path during fb init - Fix use-after-free due to order vm is put and destroyed Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xjguifyantaibyrnymuiotxws6akiexi6r7tqyieqxgquovubc@kkrtbe24hjjr 19 April 2024, 00:40:47 UTC
5493bf2 Dave Airlie 19 April 2024, 00:22:22 UTC Merge tag 'drm-misc-fixes-2024-04-18' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: nouveau: - dp: Don't probe DP ports twice - nv04: Fix OOB access - nv50: Disable AUX bus for disconnected DP ports - nvkm: Fix race condition panel: - Don't unregister DSI devices in several drivers ttm: - Stop pooling cached NUMA pages v3d: - Fix enabled_ns increment vmwgfx: - Fix PRIME import/export - Fix CRTC's atomic check for primary planes - Sort plane formats by preference Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240418072229.GA8983@localhost.localdomain 19 April 2024, 00:22:28 UTC
58292f5 Dave Airlie 18 April 2024, 21:51:31 UTC Merge tag 'amd-drm-fixes-6.9-2024-04-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.9-2024-04-17: amdgpu: - Fix invalid resource->start check - USB-C DSC fix - Fix a potential UAF in VA IOCTL - Fix visible VRAM handling during faults amdkfd: - Fix memory leak in create_process failure radeon: - Silence UBSAN warnings from variable sized arrays Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417194959.3716998-1-alexander.deucher@amd.com 18 April 2024, 23:18:22 UTC
2668e3a Linus Torvalds 18 April 2024, 19:10:19 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes: one in the core to improve the handling of warnings and unconditionally clear the command flags when ending a request and the other to add missing table values needed for bandwidth scaling in qualcomm ufs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 18 April 2024, 19:10:19 UTC
7586c85 Linus Torvalds 18 April 2024, 18:40:54 UTC Merge tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "A little calmer than usual, probably just the timing of sub-tree PRs. Including fixes from netfilter. Current release - regressions: - inet: bring NLM_DONE out to a separate recv() again, fix user space which assumes multiple recv()s will happen and gets blocked forever - drv: mlx5: - restore mistakenly dropped parts in register devlink flow - use channel mdev reference instead of global mdev instance for coalescing - acquire RTNL lock before RQs/SQs activation/deactivation Previous releases - regressions: - net: change maximum number of UDP segments to 128, fix virtio compatibility with Windows peers - usb: ax88179_178a: avoid writing the mac address before first reading Previous releases - always broken: - sched: fix mirred deadlock on device recursion - netfilter: - br_netfilter: skip conntrack input hook for promisc packets - fixes removal of duplicate elements in the pipapo set backend - various fixes for abort paths and error handling - af_unix: don't peek OOB data without MSG_OOB - drv: flower: fix fragment flags handling in multiple drivers - drv: ravb: fix jumbo frames and packet stats accounting Misc: - kselftest_harness: fix Clang warning about zero-length format - tun: limit printing rate when illegal packet received by tun dev" * tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them net: usb: ax88179_178a: avoid writing the mac address before first reading net: ravb: Fix RX byte accounting for jumbo packets net: ravb: Fix GbEth jumbo packet RX checksum handling net: ravb: Allow RX loop to move past DMA mapping errors net: ravb: Count packets instead of descriptors in R-Car RX path net: ethernet: mtk_eth_soc: fix WED + wifi reset net:usb:qmi_wwan: support Rolling modules selftests: kselftest_harness: fix Clang warning about zero-length format net/sched: Fix mirred deadlock on device recursion netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk s390/ism: Properly fix receive message buffer allocation net: dsa: mt7530: fix port mirroring for MT7988 SoC switch net: dsa: mt7530: fix mirroring frames received on local port tun: limit printing rate when illegal packet received by tun dev ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ... 18 April 2024, 18:40:54 UTC
360a348 Linus Torvalds 18 April 2024, 17:18:03 UTC Merge tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - use -ENOTSUPP consistently in Intel GPIO drivers - don't include dt-bindings headers in gpio-swnode code - add missing of device table to gpio-lpc32xx and fix autoloading * tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: swnode: Remove wrong header inclusion gpio: lpc32xx: fix module autoloading gpio: crystalcove: Use -ENOTSUPP consistently gpio: wcove: Use -ENOTSUPP consistently 18 April 2024, 17:18:03 UTC
34e526c Ard Biesheuvel 15 April 2024, 07:54:15 UTC arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H Even though the boot protocol stipulates otherwise, an exception has been made for the EFI stub, and entering the core kernel with the MMU enabled is permitted. This allows a substantial amount of cache maintenance to be elided, wich is significant when fast boot times are critical (e.g., for booting micro-VMs) Once the initial ID map has been populated, the MMU is disabled as part of the logic sequence that puts all system registers into a known state. Any code that needs to execute within the window where the MMU is off is cleaned to the PoC explicitly, which includes all of HYP text when entering at EL2. However, the current sequence of initializing the EL2 system registers is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2 is reprogrammed, and this means that a VHE-to-nVHE switch may occur while the MMU is enabled. This switch causes some system registers as well as page table descriptors to be interpreted in a different way, potentially resulting in spurious exceptions relating to MMU translation. So disable the MMU explicitly first when entering in EL2 with the MMU and caches enabled. Fixes: 617861703830 ("efi: arm64: enter with MMU and caches enabled") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: <stable@vger.kernel.org> # 6.3.x Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240415075412.2347624-6-ardb+git@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 18 April 2024, 17:00:55 UTC
2b504e1 Ard Biesheuvel 15 April 2024, 07:54:14 UTC arm64/head: Drop unnecessary pre-disable-MMU workaround The Falkor erratum that results in the need for an ISB before clearing the M bit in SCTLR_ELx only applies to execution at exception level x, and so the workaround is not needed when disabling the EL1 MMU while running at EL2. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20240415075412.2347624-5-ardb+git@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 18 April 2024, 17:00:37 UTC
c24cd67 Siddharth Vadapalli 17 April 2024, 09:54:25 UTC net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them The TX and RX DMA Channels used by the driver to exchange data with CPSW are not guaranteed to be in a clean state during driver initialization. The Bootloader could have used the same DMA Channels without cleaning them up in the event of failure. Thus, reset and disable the DMA Channels to ensure that they are in a clean state before using them. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Reported-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 16:57:03 UTC
56f7861 Jose Ignacio Tornos Martinez 17 April 2024, 08:55:13 UTC net: usb: ax88179_178a: avoid writing the mac address before first reading After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset operation, in which the default mac address from the device is read, is not executed from bind operation and the random address, that is pregenerated just in case, is direclty written the first time in the device, so the default one from the device is not even read. This writing is not dangerous because is volatile and the default mac address is not missed. In order to avoid this and keep the simplification to have only one reset and reduce the delays, restore the reset from bind operation and remove the reset that is commanded from open operation. The behavior is the same but everything is ready for usbnet_probe. Tested with ASIX AX88179 USB Gigabit Ethernet devices. Restore the old behavior for the rest of possible devices because I don't have the hardware to test. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 16:53:55 UTC
e4add02 Linus Torvalds 18 April 2024, 16:49:08 UTC Merge tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - The input subsystem contributes entropy in some places where a spinlock is held, but the entropy accounting code only handled callers being in an interrupt or non-atomic process context, but not atomic process context. We fix this by removing an optimization and just calling queue_work() unconditionally. - Greg accidently sent up a patch not intended for his tree and that had been nack'd, so that's now reverted. * tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: Revert "vmgenid: emit uevent when VMGENID updates" random: handle creditable entropy from atomic process context 18 April 2024, 16:49:08 UTC
752863b Christoph Hellwig 17 April 2024, 14:47:43 UTC block: propagate partition scanning errors to the BLKRRPART ioctl Commit 4601b4b130de ("block: reopen the device in blkdev_reread_part") lost the propagation of I/O errors from the low-level read of the partition table to the user space caller of the BLKRRPART. Apparently some user space relies on, so restore the propagation. This isn't exactly pretty as other block device open calls explicitly do not are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into the error propagation. Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part") Reported-by: Saranya Muruganandam <saranyamohan@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240417144743.2277601-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 April 2024, 15:34:34 UTC
9543f6e Eric Biggers 17 April 2024, 06:04:34 UTC x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and VPCLMULQDQ. These features don't depend on AVX512, and there exist CPUs that support these features but not AVX512. GFNI actually doesn't even depend on AVX. This prevents GFNI from being unnecessarily disabled if AVX is disabled to mitigate the GDS vulnerability. This also prevents all three features from being unnecessarily disabled if AVX512VL (or its dependency AVX512F) were to be disabled, but it looks like there isn't any case where this happens anyway. Fixes: c128dbfa0f87 ("x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/20240417060434.47101-1-ebiggers@kernel.org 18 April 2024, 15:27:52 UTC
582ee2f Daniele Palmas 18 April 2024, 11:34:30 UTC USB: serial: option: add Telit FN920C04 rmnet compositions Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 18 April 2024, 15:14:49 UTC
f2e0eee Thinh Nguyen 16 April 2024, 01:23:07 UTC usb: dwc3: ep0: Don't reset resource alloc flag The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/00122b7cc5be06abef461776e7cc9f5ebc8bc1cb.1713229786.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 April 2024, 14:42:21 UTC
1607830 Greg Kroah-Hartman 18 April 2024, 14:33:28 UTC Revert "usb: cdc-wdm: close race between read and workqueue" This reverts commit 339f83612f3a569b194680768b22bf113c26a29d. It has been found to cause problems in a number of Chromebook devices, so revert the change until it can be brought back in a safe way. Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org Reported-by:: Aleksander Morgado <aleksandermj@chromium.org> Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue") Cc: stable <stable@kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 April 2024, 14:33:28 UTC
c2d8855 Linus Torvalds 18 April 2024, 14:15:33 UTC Merge tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - amd/pmf: Add SPS notifications quirk (+ quirk support) - amd/pmf: Lower Smart PC check message severity - x86/ISST: New HW support - x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message - amd/pmc: New BIOS version still needs Spurious IRQ1 quirk * tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes platform/x86/intel-uncore-freq: Increase minor number support platform/x86: ISST: Add Granite Rapids-D to HPM CPU list platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14 platform/x86/amd: pmf: Add infrastructure for quirking supported funcs platform/x86/amd: pmf: Decrease error message to debug 18 April 2024, 14:15:33 UTC
3aadf10 Jason A. Donenfeld 18 April 2024, 11:45:17 UTC Revert "vmgenid: emit uevent when VMGENID updates" This reverts commit ad6bcdad2b6724e113f191a12f859a9e8456b26d. I had nak'd it, and Greg said on the thread that it links that he wasn't going to take it either, especially since it's not his code or his tree, but then, seemingly accidentally, it got pushed up some months later, in what looks like a mistake, with no further discussion in the linked thread. So revert it, since it's clearly not intended. Fixes: ad6bcdad2b67 ("vmgenid: emit uevent when VMGENID updates") Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.es Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> 18 April 2024, 12:47:23 UTC
ac1a21d Paolo Abeni 18 April 2024, 11:12:36 UTC Merge tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 amends a missing spot where the set iterator type is unset. This is fixing a issue in the previous pull request. Patch #2 fixes the delete set command abort path by restoring state of the elements. Reverse logic for the activate (abort) case otherwise element state is not restored, this requires to move the check for active/inactive elements to the set iterator callback. From the deactivate path, toggle the next generation bit and from the activate (abort) path, clear the next generation bitmask. Patch #3 skips elements already restored by delete set command from the abort path in case there is a previous delete element command in the batch. Check for the next generation bit just like it is done via set iteration to restore maps. netfilter pull request 24-04-18 * tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk ==================== Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 11:12:37 UTC
d10a7f5 Paolo Abeni 18 April 2024, 09:34:31 UTC Merge branch 'ravb-ethernet-driver-bugfixes' Paul Barker says: ==================== ravb Ethernet driver bugfixes These patches fix bugs found during recent work on the ravb driver. Patches 1 & 2 affect the R-Car code paths so have been tested on an R-Car M3N Salvator-XS board - this is the only R-Car board I currently have access to. Patches 2, 3 & 4 affect the GbEth code paths so have been tested on RZ/G2L and RZ/G2UL SMARC EVK boards. Changes v2->v3: * Incorporate feedback from Niklas and add Reviewed-by tag to patch "net: ravb: Count packets instead of descriptors in R-Car RX path". Changes v1->v2: * Fixed typos in commit message of patch "net: ravb: Allow RX loop to move past DMA mapping errors". * Added Sergey's Reviewed-by tags. * Expanded Cc list as Patchwork complained that I had missed people. * Trimmed the call trace in accordance with the docs [1] in patch "net: ravb: Fix GbEth jumbo packet RX checksum handling". [1]: https://docs.kernel.org/process/submitting-patches.html#backtraces-in-commit-messages ==================== Link: https://lore.kernel.org/r/20240416120254.2620-1-paul.barker.ct@bp.renesas.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 09:34:32 UTC
2e36c9f Paul Barker 16 April 2024, 12:02:54 UTC net: ravb: Fix RX byte accounting for jumbo packets The RX byte accounting for jumbo packets was changed to fix a potential use-after-free bug. However, that fix used the wrong variable and so only accounted for the number of bytes in the final descriptor, not the number of bytes in the whole packet. To fix this, we can simply update our stats with the correct number of bytes before calling napi_gro_receive(). Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future confusion. The variable name pkt_len is correct in ravb_rx_rcar() as that function does not handle packets spanning multiple descriptors. Fixes: 5a5a3e564de6 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 09:34:28 UTC
c7c4495 Paul Barker 16 April 2024, 12:02:53 UTC net: ravb: Fix GbEth jumbo packet RX checksum handling Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following backtrace: WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38 Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT) pc : skb_trim+0x30/0x38 lr : ravb_rx_csum_gbeth+0x40/0x90 Call trace: skb_trim+0x30/0x38 ravb_rx_gbeth+0x56c/0x5cc ravb_poll+0xa0/0x204 __napi_poll+0x38/0x17c This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the wrong skb for a packet which spans multiple descriptors. To fix this, use the correct skb. Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 09:34:28 UTC
a892493 Paul Barker 16 April 2024, 12:02:52 UTC net: ravb: Allow RX loop to move past DMA mapping errors The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop iteration if a zero-length descriptor is seen (indicating a DMA mapping error). However, the current RX descriptor index `priv->cur_rx[q]` was incremented at the end of the loop and so would not be incremented when we skip to the next loop iteration. This would cause the loop to keep seeing the same zero-length descriptor instead of moving on to the next descriptor. As the loop counter `i` still increments, the loop would eventually terminate so there is no risk of being stuck here forever - but we should still fix this to avoid wasting cycles. To fix this, the RX descriptor index is incremented at the top of the loop, in the for statement itself. The assignments of `entry` and `desc` are brought into the loop to avoid the need for duplication. Fixes: d8b48911fd24 ("ravb: fix ring memory allocation") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 09:34:28 UTC
def52db Paul Barker 16 April 2024, 12:02:51 UTC net: ravb: Count packets instead of descriptors in R-Car RX path The units of "work done" in the RX path should be packets instead of descriptors. Descriptors which are used by the hardware to record error conditions or are empty in the case of a DMA mapping error should not count towards our RX work budget. Also make the limit variable unsigned as it can never be negative. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 18 April 2024, 09:34:28 UTC
a4b37f5 Hou Wenlong 17 April 2024, 11:34:25 UTC x86/fred: Fix incorrect error code printout in fred_bad_type() regs->orig_ax has been set to -1 on entry so in the printout, fred_bad_type() should use the passed parameter error_code. Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code") Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> Link: https://lore.kernel.org/r/b2a8f0a41449d25240e314a2ddfbf6549511fb04.1713353612.git.houwenlong.hwl@antgroup.com 18 April 2024, 08:47:17 UTC
32f5f73 Xin Li (Intel) 17 April 2024, 17:47:31 UTC x86/fred: Fix INT80 emulation for FRED Add a FRED-specific INT80 handler and document why it differs from the current one. Eventually, the common bits will be unified once FRED hw is available and it turns out that no further changes are needed but for now, keep the handlers separate for everyone's sanity's sake. [ bp: Zap duplicated commit message, massage. ] Fixes: 55617fb991df ("x86/entry: Do not allow external 0x80 interrupts") Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240417174731.4189592-1-xin@zytor.com 18 April 2024, 08:37:11 UTC
7caf3da Mauro Carvalho Chehab 17 April 2024, 16:16:33 UTC ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N The headset mic requires a fixup to be properly detected/used. As a reference, this specific model from 2021 reports the following devices: https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 April 2024, 07:32:00 UTC
311f97a Vanillan Wang 16 April 2024, 10:02:55 UTC USB: serial: option: add Rolling RW101-GL and RW135-GL support Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 18 April 2024, 07:30:52 UTC
cf16ffa Coia Prant 15 April 2024, 14:26:25 UTC USB: serial: option: add Lonsung U8300/U9300 product Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Reviewed-by: Lars Melin <larsm17@gmail.com> [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 18 April 2024, 07:18:26 UTC
dca5f4d Huayu Zhang 13 April 2024, 11:41:22 UTC ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4 change HDA & AMP configuration from ALC287_FIXUP_CS35L41_I2C_2 to ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD for ThinkBook 16P Gen4 models to fix volumn control issue (cannot fully mute). Signed-off-by: Huayu Zhang <zhanghuayu1233@qq.com> Fixes: 6214e24cae9b ("ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops") Message-ID: <tencent_37EB880C5E5BD99D21C16B288115C4545F06@qq.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 April 2024, 06:48:01 UTC
0672b01 Vitalii Torshyn 11 April 2024, 12:58:03 UTC ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound Added the correct pin table for Asus GU605M and GA403U, enabling all speakers to be controlled with the master. Updated quirks for GU605M and GA403U by including the pin table patch in the chain. Co-developed-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com> Message-ID: <20240411125803.18539-1-vitaly.torshyn@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 April 2024, 06:46:40 UTC
f74ab0c Shenghao Ding 11 April 2024, 09:18:22 UTC ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 Add new vendor_id and subsystem_id to support new Lenovo laptop ThinkPad ICE-1 Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Cc: <stable@vger.kernel.org> Message-ID: <20240411091823.1644-1-shenghao-ding@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 April 2024, 06:40:26 UTC
9466794 Felix Fietkau 16 April 2024, 08:23:29 UTC net: ethernet: mtk_eth_soc: fix WED + wifi reset The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 01:40:46 UTC
d362046 Vanillan Wang 16 April 2024, 12:07:13 UTC net:usb:qmi_wwan: support Rolling modules Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 01:39:14 UTC
e59b495 Jakub Kicinski 18 April 2024, 01:38:34 UTC Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-16 (ice) This series contains updates to ice driver only. Michal fixes a couple of issues with TC filter parsing; always add match for src_vsi and remove flag check that could prevent addition of valid filters. Marcin adds additional checks for unsupported flower filters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ==================== Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 01:38:34 UTC
caed8eb Jakub Kicinski 16 April 2024, 15:10:48 UTC selftests: kselftest_harness: fix Clang warning about zero-length format Apparently it's more legal to pass the format as NULL, than it is to use an empty string. Clang complains about empty formats: ./../kselftest_harness.h:1207:30: warning: format string is empty [-Wformat-zero-length] 1207 | diagnostic ? "%s" : "", diagnostic); | ^~ 1 warning generated. Reported-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic") Tested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 01:35:49 UTC
8cd26fd Linus Torvalds 18 April 2024, 01:25:40 UTC Merge tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixup in zoned mode for out-of-order writes of metadata that are no longer necessary, this used to be tracked in a separate list but now the old locaion needs to be zeroed out, also add assertions - fix bulk page allocation retry, this may stall after first failure for compression read/write * tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: do not wait for short bulk allocation btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer 18 April 2024, 01:25:40 UTC
0f022d3 Eric Dumazet 15 April 2024, 21:07:28 UTC net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. Reported-by: Mingshuai Ren <renmingshuai@huawei.com> Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/ Fixes: 3bcb846ca4cf ("net: get rid of spin_trylock() in net_tx_action()") Fixes: e578d9c02587 ("net: sched: use counter to break reclassify loops") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 18 April 2024, 01:22:52 UTC
86a1471 Pablo Neira Ayuso 17 April 2024, 15:43:21 UTC netfilter: nf_tables: fix memleak in map from abort path The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared. This is similar to the activate logic using the set walk iterator. [ 6170.286929] ------------[ cut here ]------------ [ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287071] Modules linked in: [...] [ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365 [ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f [ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202 [ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000 [ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750 [ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55 [ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10 [ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100 [ 6170.287940] FS: 0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000 [ 6170.287948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0 [ 6170.287962] Call Trace: [ 6170.287967] <TASK> [ 6170.287973] ? __warn+0x9f/0x1a0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.288104] ? handle_bug+0x3c/0x70 [ 6170.288112] ? exc_invalid_op+0x17/0x40 [ 6170.288120] ? asm_exc_invalid_op+0x1a/0x20 [ 6170.288132] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288243] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288366] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288483] nf_tables_trans_destroy_work+0x588/0x590 [nf_tables] Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 18 April 2024, 00:41:32 UTC
69ffed4 Andy Shevchenko 17 April 2024, 14:19:13 UTC gpiolib: swnode: Remove wrong header inclusion The flags in the software node properties are supposed to be the GPIO lookup flags, which are provided by gpio/machine.h, as the software nodes are the kernel internal thing and doesn't need to rely to any of ABIs. Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 17 April 2024, 20:48:14 UTC
298b871 Masami Hiramatsu (Google) 15 April 2024, 21:44:04 UTC bootconfig: Fix the kerneldoc of _xbc_exit() Fix the kerneldoc of _xbc_exit() which is updated to have an @early argument and the function name is changed. Link: https://lore.kernel.org/all/171321744474.599864.13532445969528690358.stgit@devnote2/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404150036.kPJ3HEFA-lkp@intel.com/ Fixes: 89f9a1e876b5 ("bootconfig: use memblock_free_late to free xbc memory to buddy") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> 17 April 2024, 20:01:32 UTC
4b6b513 Linus Torvalds 17 April 2024, 17:04:40 UTC Merge tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fixes from Uwe Kleine-König: "The first patch fixes a regression in the suspend/resume path for the dwc pwm driver that was introduced in v6.9-rc1 when support for 16 channel devices was added. The second patch fixes a bunch of device tree binding check warnings" * tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property pwm: dwc: allow suspend/resume for 16 channels 17 April 2024, 17:04:40 UTC
6376306 Borislav Petkov (AMD) 15 April 2024, 16:15:43 UTC x86/retpolines: Enable the default thunk warning only on relevant configs The using-default-thunk warning check makes sense only with configurations which actually enable the special return thunks. Otherwise, it fires on unrelated 32-bit configs on which the special return thunks won't even work (they're 64-bit only) and, what is more, those configs even go off into the weeds when booting in the alternatives patching code, leading to a dead machine. Fixes: 4461438a8405 ("x86/retpoline: Ensure default return thunk isn't used at runtime") Reported-by: Klara Modin <klarasmodin@gmail.com> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Klara Modin <klarasmodin@gmail.com> Link: https://lore.kernel.org/r/78e0d19c-b77a-4169-a80f-2eef91f4a1d6@gmail.com Link: https://lore.kernel.org/r/20240413024956.488d474e@yea 17 April 2024, 16:02:05 UTC
781d41f Alex Deucher 08 April 2024, 17:30:15 UTC drm/radeon: silence UBSAN warning (v3) Convert a variable sized array from [1] to []. v2: fix up a few more. v3: integrate comments from Kees. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2) Acked-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: keescook@chromium.org 17 April 2024, 15:50:43 UTC
0ba753b Alex Deucher 15 April 2024, 02:06:08 UTC drm/radeon: make -fstrict-flex-arrays=3 happy The driver parses a union where the layout up through the first array is the same, however, the array has different sizes depending on the elements in the union. Be explicit to fix the UBSAN checker. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kees Cook <keescook@chromium.org> 17 April 2024, 15:50:43 UTC
a6ff969 Christian König 04 April 2024, 14:25:40 UTC drm/amdgpu: fix visible VRAM handling during faults When we removed the hacky start code check we actually didn't took into account that *all* VRAM pages needs to be CPU accessible. Clean up the code and unify the handling into a single helper which checks if the whole resource is CPU accessible. The only place where a partial check would make sense is during eviction, but that is neglitible. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org 17 April 2024, 15:50:43 UTC
6fef2d4 xinhui pan 11 April 2024, 03:11:38 UTC drm/amdgpu: validate the parameters of bo mapping operations more clearly Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov <hexed@google.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 17 April 2024, 15:50:43 UTC
44ecfa3 Paolo Bonzini 17 April 2024, 15:42:51 UTC Merge branch 'svm' of https://github.com/kvm-x86/linux into HEAD Clean up SVM's enter/exit assembly code so that it can be compiled without OBJECT_FILES_NON_STANDARD. The "standard" __svm_vcpu_run() can't be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's also the case for __vmx_vcpu_run(), and getting "close enough" is better than not even trying. As for SEV-ES, after yet another refresher on swap types, I realized KVM can simply let the hardware restore registers after #VMEXIT, all that's missing is storing the current values to the host save area (they are swap type B). This should provide 100% accuracy when using stack frames for unwinding, and requires less assembly. In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out "support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was unnecessarily polluting the code for a configuration that is disabled at build time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 17 April 2024, 15:44:37 UTC
e79b47a Pablo Neira Ayuso 17 April 2024, 15:43:11 UTC netfilter: nf_tables: restore set elements when delete set fails From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] <TASK> [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 17 April 2024, 15:43:11 UTC
efefd4f Pablo Neira Ayuso 17 April 2024, 15:43:01 UTC netfilter: nf_tables: missing iterator type in lookup walk Add missing decorator type to lookup expression and tighten WARN_ON_ONCE check in pipapo to spot earlier that this is unset. Fixes: 29b359cf6d95 ("netfilter: nft_set_pipapo: walk over current view on netlink dump") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 17 April 2024, 15:43:01 UTC
d111855 Sven Schnelle 15 April 2024, 05:52:13 UTC s390/mm: Fix NULL pointer dereference The recently added check to figure out if a fault happened on gmap ASCE dereferences the gmap pointer in lowcore without checking that it is not NULL. For all non-KVM processes the pointer is NULL, so that some value from lowcore will be read. With the current layouts of struct gmap and struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead to any observable bug; at least currently. Fix this by adding the missing NULL pointer check. Fixes: 64c3431808bd ("s390/entry: compare gmap asce to determine guest/host fault") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> 17 April 2024, 15:26:34 UTC
91f10a3 Alex Deucher 29 March 2024, 22:03:03 UTC Revert "drm/amd/display: fix USB-C flag update after enc10 feature init" This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652. This change breaks DSC on 4k monitors at 144Hz over USB-C. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Charlene Liu <charlene.liu@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org 17 April 2024, 15:12:21 UTC
18921b2 Felix Kuehling 10 April 2024, 19:52:10 UTC drm/amdkfd: Fix memory leak in create_process failure Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable") CC: Xiaogang Chen <xiaogang.chen@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 17 April 2024, 15:05:09 UTC
ca7c450 Christian König 15 March 2024, 12:07:53 UTC drm/amdgpu: remove invalid resource->start check v2 The majority of those where removed in the commit aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") But this one was missed because it's working on the resource and not the BO. Since we also no longer use a fake start address for visible BOs this will now trigger invalid mapping errors. v2: also remove the unused variable Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: stable@vger.kernel.org Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 17 April 2024, 15:02:57 UTC
f609e7b Mario Limonciello 10 April 2024, 14:10:46 UTC platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still being worked on there is still a possibility that it won't need to apply to future BIOS releases. Add a quirk for BIOS 03.05 as well. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 17 April 2024, 14:05:30 UTC
ca7c52a Matthew Auld 12 April 2024, 11:31:45 UTC drm/xe/vm: prevent UAF with asid based lookup The asid is only erased from the xarray when the vm refcount reaches zero, however this leads to potential UAF since the xe_vm_get() only works on a vm with refcount != 0. Since the asid is allocated in the vm create ioctl, rather erase it when closing the vm, prior to dropping the potential last ref. This should also work when user closes driver fd without explicit vm destroy. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com (cherry picked from commit 83967c57320d0d01ae512f10e79213f81e4bf594) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> 17 April 2024, 13:03:13 UTC
652ead9 Maarten Lankhorst 04 April 2024, 09:03:02 UTC drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init Add a unreference bo in the error path, to prevent leaking a bo ref. Return 0 on success to clarify the success path. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com (cherry picked from commit a2f3d731be3893e730417ae3190760fcaffdf549) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> 17 April 2024, 13:03:06 UTC
8378138 Gerd Bayer 15 April 2024, 13:15:07 UTC s390/ism: Properly fix receive message buffer allocation Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only, and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/ Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 April 2024, 11:55:49 UTC
e871abc Jason A. Donenfeld 17 April 2024, 11:38:29 UTC random: handle creditable entropy from atomic process context The entropy accounting changes a static key when the RNG has initialized, since it only ever initializes once. Static key changes, however, cannot be made from atomic context, so depending on where the last creditable entropy comes from, the static key change might need to be deferred to a worker. Previously the code used the execute_in_process_context() helper function, which accounts for whether or not the caller is in_interrupt(). However, that doesn't account for the case where the caller is actually in process context but is holding a spinlock. This turned out to be the case with input_handle_event() in drivers/input/input.c contributing entropy: [<ffffffd613025ba0>] die+0xa8/0x2fc [<ffffffd613027428>] bug_handler+0x44/0xec [<ffffffd613016964>] brk_handler+0x90/0x144 [<ffffffd613041e58>] do_debug_exception+0xa0/0x148 [<ffffffd61400c208>] el1_dbg+0x60/0x7c [<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90 [<ffffffd613011294>] el1h_64_sync+0x64/0x6c [<ffffffd613102d88>] __might_resched+0x1fc/0x2e8 [<ffffffd613102b54>] __might_sleep+0x44/0x7c [<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec [<ffffffd6132c2820>] static_key_enable+0x14/0x38 [<ffffffd61400ac08>] crng_set_ready+0x14/0x28 [<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8 [<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc [<ffffffd6138580c8>] add_timer_randomness+0x264/0x270 [<ffffffd613857e54>] add_input_randomness+0x38/0x48 [<ffffffd613a80f94>] input_handle_event+0x2b8/0x490 [<ffffffd613a81310>] input_event+0x6c/0x98 According to Guoyong, it's not really possible to refactor the various drivers to never hold a spinlock there. And in_atomic() isn't reliable. So, rather than trying to be too fancy, just punt the change in the static key to a workqueue always. There's basically no drawback of doing this, as the code already needed to account for the static key not changing immediately, and given that it's just an optimization, there's not exactly a hurry to change the static key right away, so deferal is fine. Reported-by: Guoyong Wang <guoyong.wang@mediatek.com> Cc: stable@vger.kernel.org Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> 17 April 2024, 11:53:18 UTC
ea2624b Uwe Kleine-König 17 April 2024, 09:03:28 UTC serial: stm32: Reset .throttled state in .startup() When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 April 2024, 11:26:45 UTC
13c7853 Uwe Kleine-König 17 April 2024, 09:03:27 UTC serial: stm32: Return IRQ_NONE in the ISR if no handling happend If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 April 2024, 11:26:45 UTC
cb178cc David S. Miller 17 April 2024, 07:56:51 UTC Merge branch 'mt7530-fixes' Merge branch 'mr7530-fixes' Arınç ÜNAL says: ==================== Fix port mirroring on MT7530 DSA subdriver This patch series fixes the frames received on the local port (monitor port) not being mirrored, and port mirroring for the MT7988 SoC switch. ==================== Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> 17 April 2024, 07:56:51 UTC
2c606d1 Arınç ÜNAL 13 April 2024, 13:01:40 UTC net: dsa: mt7530: fix port mirroring for MT7988 SoC switch The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU forward control register. Currently, the MT7530 DSA subdriver configures bits 0 to 2 of the CPU forward control register which breaks the port mirroring feature for the MT7988 SoC switch. Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET() macros which utilise the correct bits. Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 April 2024, 07:56:36 UTC
d59cf04 Arınç ÜNAL 13 April 2024, 13:01:39 UTC net: dsa: mt7530: fix mirroring frames received on local port This switch intellectual property provides a bit on the ARL global control register which controls allowing mirroring frames which are received on the local port (monitor port). This bit is unset after reset. This ability must be enabled to fully support the port mirroring feature on this switch intellectual property. Therefore, this patch fixes the traffic not being reflected on a port, which would be configured like below: tc qdisc add dev swp0 clsact tc filter add dev swp0 ingress matchall skip_sw \ action mirred egress mirror dev swp0 As a side note, this configuration provides the hairpinning feature for a single port. Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 April 2024, 07:56:36 UTC
fb1f458 Chuanhong Guo 12 March 2024, 06:29:12 UTC USB: serial: option: add support for Fibocom FM650/FG650 Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 17 April 2024, 07:34:41 UTC
f8bbc07 Lei Chen 15 April 2024, 02:02:46 UTC tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a59542 ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 17 April 2024, 00:13:23 UTC
c4a7dc9 Jeongjun Park 15 April 2024, 18:20:48 UTC nilfs2: fix OOB in nilfs_set_de_type The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors. Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8 Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 16 April 2024, 22:39:52 UTC
8247bf1 Naoya Horiguchi 12 April 2024, 18:17:20 UTC MAINTAINERS: update Naoya Horiguchi's email address My old NEC address has been removed, so update MAINTAINERS and .mailmap to map it to my gmail address. Link: https://lkml.kernel.org/r/20240412181720.18452-1-nao.horiguchi@gmail.com Signed-off-by: Naoya Horiguchi <nao.horiguchi@gmail.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 16 April 2024, 22:39:51 UTC
back to top