Skip to main content

Browse the archive

https://github.com/torvalds/linux
29 July 2024, 15:18:00 UTC
sort by:
Revision Author Date Message Commit Date
18bc7bd Andy Lutomirski 10 August 2016, 09:29:14 UTC x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly The initialization process for trampoline_cr4_features and mmu_cr4_features was confusing. The intent is for mmu_cr4_features and *trampoline_cr4_features to stay in sync, but trampoline_cr4_features is NULL until setup_real_mode() runs. The old code synchronized *trampoline_cr4_features *twice*, once in setup_real_mode() and once in setup_arch(). It also initialized mmu_cr4_features in setup_real_mode(), which causes the actual value of mmu_cr4_features to potentially depend on when setup_real_mode() is called. With this patch, mmu_cr4_features is initialized directly in setup_arch(), and *trampoline_cr4_features is synchronized to mmu_cr4_features when the trampoline is set up. After this patch, it should be safe to defer setup_real_mode(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d48a263f9912389b957dd495a7127b009259ffe0.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 August 2016, 09:15:00 UTC
007b756 Andy Lutomirski 10 August 2016, 09:29:13 UTC x86/boot: Run reserve_bios_regions() after we initialize the memory map reserve_bios_regions() is a quirk that reserves memory that we might otherwise think is available. There's no need to run it so early, and running it before we have the memory map initialized with its non-quirky inputs makes it hard to make reserve_bios_regions() more intelligent. Move it right after we populate the memblock state. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <mario_limonciello@dell.com> Cc: Matt Fleming <mfleming@suse.de> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/59f58618911005c799c6c9979ce6ae4881d907c2.1470821230.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 August 2016, 09:14:59 UTC
82ba4fa Aaron Lu 11 August 2016, 07:44:30 UTC x86/irq: Do not substract irq_tlb_count from irq_call_count Since commit: 52aec3308db8 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR") the TLB remote shootdown is done through call function vector. That commit didn't take care of irq_tlb_count, which a later commit: fd0f5869724f ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts") ... tried to fix. The fix assumes every increase of irq_tlb_count has a corresponding increase of irq_call_count. So the irq_call_count is always bigger than irq_tlb_count and we could substract irq_tlb_count from irq_call_count. Unfortunately this is not true for the smp_call_function_single() case. The IPI is only sent if the target CPU's call_single_queue is empty when adding a csd into it in generic_exec_single. That means if two threads are both adding flush tlb csds to the same CPU's call_single_queue, only one IPI is sent. In other words, the irq_call_count is incremented by 1 but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be bigger than irq_call_count and the substract will produce a very large irq_call_count value due to overflow. Considering that: 1) it's not worth to send more IPIs for the sake of accurate counting of irq_call_count in generic_exec_single(); 2) it's not easy to tell if the call function interrupt is for TLB shootdown in __smp_call_function_single_interrupt(). Not to exclude TLB shootdown from call function count seems to be the simplest fix and this patch just does that. This bug was found by LKP's cyclic performance regression tracking recently with the vm-scalability test suite. I have bisected to commit: 3dec0ba0be6a ("mm/rmap: share the i_mmap_rwsem") This commit didn't do anything wrong but revealed the irq_call_count problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file concurrent with multiple threads. When remap_one is try_to_unmap_one(), then multiple threads could queue flush TLB to the same CPU but only one IPI will be sent. Since the commit was added in Linux v3.19, the counting problem only shows up from v3.19 onwards. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 August 2016, 09:14:59 UTC
ace7fab Dave Hansen 10 August 2016, 17:23:25 UTC x86/mm: Fix swap entry comment and macro A recent patch changed the format of a swap PTE. The comment explaining the format of the swap PTE is wrong about the bits used for the swap type field. Amusingly, the ASCII art and the patch description are correct, but the comment itself is wrong. As I was looking at this, I also noticed that the SWP_OFFSET_FIRST_BIT has an off-by-one error. This does not really hurt anything. It just wasted a bit of space in the PTE, giving us 2^59 bytes of addressable space in our swapfiles instead of 2^60. But, it doesn't match with the comments, and it wastes a bit of space, so fix it. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Fixes: 00839ee3b299 ("x86/mm: Move swap offset/type up in PTE to work around erratum") Link: http://lkml.kernel.org/r/20160810172325.E56AD7DA@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 August 2016, 09:04:10 UTC
62d16b5 Nicolas Iooss 06 August 2016, 10:20:39 UTC x86/mm/kaslr: Fix -Wformat-security warning debug_putstr() is used to output strings without using printf-like formatting but debug_putstr(v) is defined as early_printk(v) in arch/x86/lib/kaslr.c. This makes clang reports the following warning when building with -Wformat-security: arch/x86/lib/kaslr.c:57:15: warning: format string is not a string literal (potentially insecure) [-Wformat-security] debug_putstr(purpose); ^~~~~~~ Fix this by using "%s" in early_printk(). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160806102039.27221-1-nicolas.iooss_linux@m4x.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 11 August 2016, 08:58:12 UTC
b79daf8 Dave Hansen 27 July 2016, 23:20:40 UTC x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation The Memory Protection Keys "rights register" (PKRU) is XSAVE-managed, and is saved/restored along with the FPU state. When kernel code accesses FPU regsisters, it does a delicate dance with preempt. Otherwise, the context switching code can get confused as to whether the most up-to-date state is in the registers themselves or in the XSAVE buffer. But, PKRU is not a normal FPU register. Using it does not generate the normal device-not-available (#NM) exceptions which means we can not manage it lazily, and the kernel completley disallows using lazy mode when it is enabled. The dance with preempt *only* occurs when managing the FPU lazily. Since we never manage PKRU lazily, we do not have to do the dance with preempt; we can access it directly. Doing it this way saves a ton of complicated code (and is faster too). Further, the XSAVES reenabling failed to patch a bit of code in fpu__xfeature_set_state() the checked for compacted buffers. That check caused fpu__xfeature_set_state() to silently refuse to work when the kernel is using compacted XSAVE buffers. This broke execute-only and future pkey_mprotect() support when using compact XSAVE buffers. But, removing fpu__xfeature_set_state() gets rid of this issue, in addition to the nice cleanup and speedup. This fixes the same thing as a fix that Sai posted: https://lkml.org/lkml/2016/7/25/637 The fix that he posted is a much more obviously correct, but I think we should just do this instead. Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-Cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160727232040.7D060DAD@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 14:12:26 UTC
5e44258 Valdis Kletnieks 01 August 2016, 03:24:50 UTC x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables Building an X86_64 kernel with W=1 throws a total of 9,948 lines of warnings of this form for both 32-bit and 64-bit syscall tables. Given that the entire rest of the build for my config only generates 8,375 lines of output, this is a big reduction in the warnings generated. The warnings follow this pattern: ./arch/x86/include/generated/asm/syscalls_32.h:885:21: warning: initialized field overwritten [-Woverride-init] __SYSCALL_I386(379, compat_sys_pwritev2, ) ^ arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386' #define __SYSCALL_I386(nr, sym, qual) [nr] = sym, ^~~ ./arch/x86/include/generated/asm/syscalls_32.h:885:21: note: (near initialization for 'ia32_sys_call_table[379]') __SYSCALL_I386(379, compat_sys_pwritev2, ) ^ arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386' #define __SYSCALL_I386(nr, sym, qual) [nr] = sym, Since we intentionally build the syscall tables this way, ignore that one warning in the two files. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/7464.1470021890@turing-police.cc.vt.edu Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 14:05:16 UTC
5a52e8f Mike Travis 01 August 2016, 18:40:53 UTC x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems The latest UV kernel support panics when RHEL7 kexec's the kdump kernel to make a dumpfile. This patch fixes the problem by turning off all UV support if NUMA is off. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.577755634@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:55:39 UTC
22ac2bc Mike Travis 01 August 2016, 18:40:52 UTC x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values There are some circumstances where the UV4 BIOS cannot provide the correct Proximity Node values to associate with specific Sockets and Physical Nodes. The decision was made to remove these values from BIOS and for the kernel to get these values from the standard ACPI tables. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.414210079@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:55:38 UTC
e363d24 Mike Travis 01 August 2016, 18:40:51 UTC x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash Save the uv_systab::size field before doing the iounmap() of the struct pointer, to avoid a NULL dereference crash. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.250424783@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:55:38 UTC
054f621 Mike Travis 01 August 2016, 18:40:50 UTC x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous The UV4 Socket IDs are not guaranteed to equate to Node values which can cause the GAM (Global Addressable Memory) table lookups to fail. Fix this by using an independent index into the GAM table instead of the Socket ID to reference the base address. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.048755337@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:55:38 UTC
3e03530 Borislav Petkov 03 August 2016, 17:14:29 UTC x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET Clarify why exactly RF cannot be restored properly by SYSRET to avoid confusion. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160803171429.GA2590@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:53:43 UTC
5cf0791 Sebastian Andrzej Siewior 05 August 2016, 13:37:39 UTC x86/mm: Disable preemption during CR3 read+write There's a subtle preemption race on UP kernels: Usually current->mm (and therefore mm->pgd) stays the same during the lifetime of a task so it does not matter if a task gets preempted during the read and write of the CR3. But then, there is this scenario on x86-UP: TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by: -> mmput() -> exit_mmap() -> tlb_finish_mmu() -> tlb_flush_mmu() -> tlb_flush_mmu_tlbonly() -> tlb_flush() -> flush_tlb_mm_range() -> __flush_tlb_up() -> __flush_tlb() -> __native_flush_tlb() At this point current->mm is NULL but current->active_mm still points to the "old" mm. Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its own mm so CR3 has changed. Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's mm and so CR3 remains unchanged. Once taskA gets active it continues where it was interrupted and that means it writes its old CR3 value back. Everything is fine because userland won't need its memory anymore. Now the fun part: Let's preempt taskA one more time and get back to taskB. This time switch_mm() won't do a thing because oldmm (->active_mm) is the same as mm (as per context_switch()). So we remain with a bad CR3 / PGD and return to userland. The next thing that happens is handle_mm_fault() with an address for the execution of its code in userland. handle_mm_fault() realizes that it has a PTE with proper rights so it returns doing nothing. But the CPU looks at the wrong PGD and insists that something is wrong and faults again. And again. And one more time… This pagefault circle continues until the scheduler gets tired of it and puts another task on the CPU. It gets little difficult if the task is a RT task with a high priority. The system will either freeze or it gets fixed by the software watchdog thread which usually runs at RT-max prio. But waiting for the watchdog will increase the latency of the RT task which is no good. Fix this by disabling preemption across the critical code section. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de [ Prettified the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 13:37:16 UTC
fb754f9 Thomas Garnier 09 August 2016, 17:11:05 UTC x86/mm/KASLR: Increase BRK pages for KASLR memory randomization Default implementation expects 6 pages maximum are needed for low page allocations. If KASLR memory randomization is enabled, the worse case of e820 layout would require 12 pages (no large pages). It is due to the PUD level randomization and the variable e820 memory layout. This bug was found while doing extensive testing of KASLR memory randomization on different type of hardware. Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kernel-hardening@lists.openwall.com Fixes: 021182e52fe0 ("Enable KASLR for physical mapping memory regions") Link: http://lkml.kernel.org/r/1470762665-88032-2-git-send-email-thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 12:45:19 UTC
c7d2361 Thomas Garnier 09 August 2016, 17:11:04 UTC x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization Initialize KASLR memory randomization after max_pfn is initialized. Also ensure the size is rounded up. It could create problems on machines with more than 1Tb of memory on certain random addresses. Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kernel-hardening@lists.openwall.com Fixes: 021182e52fe0 ("Enable KASLR for physical mapping memory regions") Link: http://lkml.kernel.org/r/1470762665-88032-1-git-send-email-thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 12:45:19 UTC
469f002 Alexander Potapenko 15 July 2016, 09:42:43 UTC x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text Dmitry Vyukov has reported unexpected KASAN stackdepot growth: https://github.com/google/kasan/issues/36 ... which is caused by the APIC handlers not being present in .irqentry.text: When building with CONFIG_FUNCTION_GRAPH_TRACER=y or CONFIG_KASAN=y, put the APIC interrupt handlers into the .irqentry.text section. This is needed because both KASAN and function graph tracer use __irqentry_text_start and __irqentry_text_end to determine whether a function is an IRQ entry point. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: aryabinin@virtuozzo.com Cc: kasan-dev@googlegroups.com Cc: kcc@google.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1468575763-144889-1-git-send-email-glider@google.com [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> 10 August 2016, 12:19:33 UTC
a0cba21 Linus Torvalds 09 August 2016, 17:48:18 UTC Revert "printk: create pr_<level> functions" This reverts commit 874f9c7da9a4acbc1b9e12ca722579fb50e4d142. Geert Uytterhoeven reports: "This change seems to have an (unintendent?) side-effect. Before, pr_*() calls without a trailing newline characters would be printed with a newline character appended, both on the console and in the output of the dmesg command. After this commit, no new line character is appended, and the output of the next pr_*() call of the same type may be appended, like in: - Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000 - Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM) + Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)" Joe Perches says: "No, that is not intentional. The newline handling code inside vprintk_emit is a bit involved and for now I suggest a revert until this has all the same behavior as earlier" Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Requested-by: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 August 2016, 17:48:18 UTC
84bd8d3 Linus Torvalds 09 August 2016, 17:34:09 UTC Merge tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix tick_stop tracepoint symbols for user export. Luiz Capitulino noticed that the tick_stop tracepoint wasn't being parsed properly by the tracing user space tools. This was due to the TRACE_DEFINE_ENUM() being set to a define, when it should have been set to the enum itself. The define was of the MASK that used the BIT to shift. The BIT was the enum and by adding that, everything gets converted nicely. The MASK is still kept just in case it gets converted to an enum in the future" * tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix tick_stop tracepoint symbols for user export 09 August 2016, 17:34:09 UTC
b79f34d Linus Torvalds 09 August 2016, 17:30:07 UTC Merge tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugin improvements from Kees Cook: "Several fixes/improvements for the gcc plugin infrastructure: - fix a problem with gcc plugins interfering with cc-option tests. - abort more gracefully when gcc plugin headers or compiler support is missing. - improve the gcc plugin rule generation to be more dynamic, pass arguments, and build from subdirectories" * tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Add support for plugin subdirectories gcc-plugins: Automate make rule generation gcc-plugins: Add support for passing plugin arguments gcc-plugins: abort builds cleanly when not supported kbuild: no gcc-plugins during cc-option tests 09 August 2016, 17:30:07 UTC
e1d009e Linus Torvalds 09 August 2016, 17:26:14 UTC Merge tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: "dell-wmi: ignore battery remove/insert event" * tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: dell-wmi: Ignore WMI event 0xe00e 09 August 2016, 17:26:14 UTC
cb0d93a Linus Torvalds 09 August 2016, 17:20:21 UTC Merge tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "This contains a bunch of amdgpu fixes, and some i915 regression fixes. It also contains some fixes for an older regression with some EDID changes and some 6bpc panels. Then there are the lockdep, cirrus and rcar-du regression fixes from this window" * tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Fix NULL pointer dereference when registering the fbdev drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS". drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown" drm/edid: Add 6 bpc quirk for display AEO model 0. drm: Paper over locking inversion after registration rework drm: rcar-du: Link HDMI encoder with bridge drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/i915/fbdev: Check for the framebuffer before use drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL 09 August 2016, 17:20:21 UTC
a3d1ddd Brian King 08 August 2016, 22:53:12 UTC ipr: Fix sync scsi scan Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is initialized") fixed async scan for ipr, but broke sync scan for ipr. This fixes sync scan back up. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 August 2016, 17:17:42 UTC
c4159a7 Vladimir Davydov 08 August 2016, 20:03:12 UTC mm: memcontrol: only mark charged pages with PageKmemcg To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg, which sets page->_mapcount to -512. Currently, we set/clear PageKmemcg in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated with __GFP_ACCOUNT, including those that aren't actually charged to any cgroup, i.e. allocated from the root cgroup context. To avoid overhead in case cgroups are not used, we only do that if memcg_kmem_enabled() is true. The latter is set iff there are kmem-enabled memory cgroups (online or offline). The root cgroup is not considered kmem-enabled. As a result, if a page is allocated with __GFP_ACCOUNT for the root cgroup when there are kmem-enabled memory cgroups and is freed after all kmem-enabled memory cgroups were removed, e.g. # no memory cgroups has been created yet, create one mkdir /sys/fs/cgroup/memory/test # run something allocating pages with __GFP_ACCOUNT, e.g. # a program using pipe dmesg | tail # remove the memory cgroup rmdir /sys/fs/cgroup/memory/test we'll get bad page state bug complaining about page->_mapcount != -1: BUG: Bad page state in process swapper/0 pfn:1fd945c page:ffffea007f651700 count:0 mapcount:-511 mapping: (null) index:0x0 flags: 0x1000000000000000() To avoid that, let's mark with PageKmemcg only those pages that are actually charged to and hence pin a non-root memory cgroup. Fixes: 4949148ad433 ("mm: charge/uncharge kmemcg from generic page allocator paths") Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 09 August 2016, 17:14:10 UTC
c87edb3 Steven Rostedt (Red Hat) 05 August 2016, 16:41:52 UTC tracing: Fix tick_stop tracepoint symbols for user export The symbols used in the tick_stop tracepoint were not being converted properly into integers in the trace_stop format file. Instead we had this: print fmt: "success=%d dependency=%s", REC->success, __print_symbolic(REC->dependency, { 0, "NONE" }, { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" }, { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" }, { (1 << TICK_DEP_BIT_SCHED), "SCHED" }, { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" }) User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other symbols used to do the bit shifting. The reason is that the conversion was done with using the TICK_DEP_MASK_* symbols which are just macros that convert to the BIT shift itself (with the exception of NONE, which was converted properly, because it doesn't use bits, and is defined as zero). The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to have this properly converted for user space tools to parse this event. Cc: stable@vger.kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message") Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 09 August 2016, 13:51:23 UTC
36e9d08 Boris Brezillon 09 August 2016, 00:16:18 UTC drm/cirrus: Fix NULL pointer dereference when registering the fbdev cirrus_modeset_init() is initializing/registering the emulated fbdev and, since commit c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid"), DRM internals can access/test some of the fields in mode_config->funcs as part of the fbdev registration process. Make sure dev->mode_config.funcs is properly set to avoid dereferencing a NULL pointer. Reported-by: Mike Marshall <hubcap@omnibond.com> Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid") Signed-off-by: Dave Airlie <airlied@redhat.com> 09 August 2016, 03:01:47 UTC
caefd8c Emese Revfy 26 June 2016, 15:38:20 UTC gcc-plugins: Add support for plugin subdirectories This adds support for building more complex gcc plugins that live in a subdirectory instead of just in a single source file. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org> 09 August 2016, 00:53:05 UTC
7040c83 Emese Revfy 26 June 2016, 15:36:43 UTC gcc-plugins: Automate make rule generation There's no reason to repeat the same names in the Makefile when the .so files have already been listed. The .o list can be generated from them. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org> 09 August 2016, 00:52:20 UTC
65d59ec Emese Revfy 20 June 2016, 18:40:24 UTC gcc-plugins: Add support for passing plugin arguments The latent_entropy plugin needs to pass arguments, so this adds the support. Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> 09 August 2016, 00:49:05 UTC
ed58c0e Kees Cook 18 June 2016, 06:11:12 UTC gcc-plugins: abort builds cleanly when not supported When the compiler doesn't support gcc plugins (either due to missing headers or too old a version), report the problem and abort the build instead of emitting a warning and letting the build founder with arcane compiler errors. Signed-off-by: Kees Cook <keescook@chromium.org> 09 August 2016, 00:49:05 UTC
d26e941 Emese Revfy 18 June 2016, 06:28:34 UTC kbuild: no gcc-plugins during cc-option tests The gcc-plugins arguments should not be included when performing cc-option tests. Steps to reproduce: 1) make mrproper 2) make defconfig 3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY 4) enable FUNCTION_TRACER (it will select other options as well) 5) make && make modules Build errors: MODPOST 18 modules ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined! Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: renamed variable, clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org> 09 August 2016, 00:49:05 UTC
210a021 Mario Kleiner 06 July 2016, 10:05:48 UTC drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS". According to E-EDID spec 1.3, table 3.9, a digital video sink with the "DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned". For such displays, the DFP spec 1.0, section 3.10 "EDID support" says: "If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.) without extensions, the host will make the following assumptions: 1. 24-bit MSB-aligned RGB TFT 2. DE polarity is active high 3. H and V syncs are active high 4. Established CRT timings will be used 5. Dithering will not be enabled on the host" So if we don't know the bit depth of the display from additional colorimetry info we should assume 8 bpc / 24 bpp by default. This patch adds info->bpc = 8 assignement for that case. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 August 2016, 22:56:04 UTC
196f954 Mario Kleiner 06 July 2016, 10:05:45 UTC drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown" This reverts commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 August 2016, 22:56:01 UTC
e10aec6 Mario Kleiner 06 July 2016, 10:05:44 UTC drm/edid: Add 6 bpc quirk for display AEO model 0. Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 August 2016, 22:56:00 UTC
81abf25 Linus Torvalds 08 August 2016, 22:39:24 UTC Merge tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull lkdtm update from Kees Cook: "Fix rebuild problem with LKDTM's rodata test" [ This, and the usercopy branch, both came in before the merge window closed, but ended up in my 'need to look more' queue and thus got merged only after rc1 was out ] * tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: Fix targets for objcopy usage lkdtm: fix false positive warning from -Wmaybe-uninitialized 08 August 2016, 22:39:24 UTC
1eccfa0 Linus Torvalds 08 August 2016, 21:48:14 UTC Merge tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page 08 August 2016, 21:48:14 UTC
1bd4403 Linus Torvalds 08 August 2016, 20:02:01 UTC unsafe_[get|put]_user: change interface to use a error target label When I initially added the unsafe_[get|put]_user() helpers in commit 5b24a7a2aa20 ("Add 'unsafe' user access functions for batched accesses"), I made the mistake of modeling the interface on our traditional __[get|put]_user() functions, which return zero on success, or -EFAULT on failure. That interface is fairly easy to use, but it's actually fairly nasty for good code generation, since it essentially forces the caller to check the error value for each access. In particular, since the error handling is already internally implemented with an exception handler, and we already use "asm goto" for various other things, we could fairly easily make the error cases just jump directly to an error label instead, and avoid the need for explicit checking after each operation. So switch the interface to pass in an error label, rather than checking the error value in the caller. Best do it now before we start growing more users (the signal handling code in particular would be a good place to use the new interface). So rather than if (unsafe_get_user(x, ptr)) ... handle error .. the interface is now unsafe_get_user(x, ptr, label); where an error during the user mode fetch will now just cause a jump to 'label' in the caller. Right now the actual _implementation_ of this all still ends up being a "if (err) goto label", and does not take advantage of any exception label tricks, but for "unsafe_put_user()" in particular it should be fairly straightforward to convert to using the exception table model. Note that "unsafe_get_user()" is much harder to convert to a clever exception table model, because current versions of gcc do not allow the use of "asm goto" (for the exception) with output values (for the actual value to be fetched). But that is hopefully not a limitation in the long term. [ Also note that it might be a good idea to switch unsafe_get_user() to actually _return_ the value it fetches from user space, but this commit only changes the error handling semantics ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2016, 20:02:01 UTC
574673c Andreas Ziegler 04 August 2016, 07:52:09 UTC printk: Remove unnecessary #ifdef CONFIG_PRINTK In commit 874f9c7da9a4 ("printk: create pr_<level> functions"), new pr_level defines were added to printk.c. These new defines are guarded by an #ifdef CONFIG_PRINTK - however, there is already a surrounding #ifdef CONFIG_PRINTK starting a lot earlier in line 249 which means the newly introduced #ifdef is unnecessary. Let's remove it to avoid confusion. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2016, 18:29:39 UTC
65a97a6 Pali Rohár 27 July 2016, 07:34:42 UTC dell-wmi: Ignore WMI event 0xe00e WMI event 0xe00e is received when battery was removed or inserted. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> 08 August 2016, 18:00:21 UTC
65ea11e Ville Syrjälä 08 August 2016, 17:35:29 UTC x86/hweight: Don't clobber %rdi The caller expects %rdi to remain intact, push+pop it make that happen. Fixes the following kind of explosions on my core2duo machine when trying to reboot or shut down: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69 Hardware name: /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007 task: ffff88012a0b4080 task.stack: ffff880123850000 RIP: 0010:[<ffffffff81003c92>] [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP: 0018:ffff880123853b60 EFLAGS: 00010087 RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800 RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000 R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001 R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018 FS: 00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0 Stack: ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001 ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800 ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13 Call Trace: [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0 [<ffffffff81003e13>] x86_pmu_del+0x43/0x140 [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260 [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0 [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70 [<ffffffff810c8826>] generic_exec_single+0xb6/0x140 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140 [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0 [<ffffffff81113d73>] perf_reboot+0x13/0x40 [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70 [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60 [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40 [<ffffffff81076ae2>] kernel_restart+0x12/0x60 [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0 [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0 [<ffffffff811a83e4>] ? mntput+0x24/0x40 [<ffffffff811894fc>] ? __fput+0x16c/0x1e0 [<ffffffff811895ae>] ? ____fput+0xe/0x10 [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0 [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0 [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [<ffffffff81076e6e>] SyS_reboot+0xe/0x10 [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3 Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf RIP [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP <ffff880123853b60> ---[ end trace 7ec95181faf211be ]--- note: reboot[3070] exited with preempt_count 2 Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Fixes: f5967101e9de ("x86/hweight: Get rid of the special calling convention") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 August 2016, 17:58:25 UTC
4872850 Dave Airlie 08 August 2016, 06:45:33 UTC Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux into drm-next A few fixes for amdgpu and ttm for 4.8 - fix a ttm regression caused by the new pipelining code - fixes for mullins on amdgpu - updated golden settings for amdgpu * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case 08 August 2016, 06:45:33 UTC
e8285ce Dave Airlie 08 August 2016, 06:16:26 UTC Merge tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel into drm-next 3 intel fixes. * tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel: drm/i915/fbdev: Check for the framebuffer before use drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL 08 August 2016, 06:16:26 UTC
5c6c201 Daniel Vetter 04 August 2016, 16:35:48 UTC drm: Paper over locking inversion after registration rework drm_connector_register_all requires a few too many locks because our connector_list locking is busted. Add another FIXME+hack to work around this. This should address the below lockdep splat: ====================================================== [ INFO: possible circular locking dependency detected ] 4.7.0-rc5+ #524 Tainted: G O ------------------------------------------------------- kworker/u8:0/6 is trying to acquire lock: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 but task is already holding lock: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((fb_notifier_list).rwsem){++++.+}: [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a55b4>] down_write+0x44/0x80 [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0 [<ffffffff814c7448>] fb_register_client+0x18/0x20 [<ffffffff814c6c86>] backlight_device_register+0x136/0x260 [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915] [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915] [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915] [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80 [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0 [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0 [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0 [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915] [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff814a2135>] local_pci_probe+0x45/0xa0 [<ffffffff814a349b>] pci_device_probe+0xdb/0x130 [<ffffffff815c07e3>] driver_probe_device+0x223/0x440 [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100 [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0 [<ffffffff815c002e>] driver_attach+0x1e/0x20 [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280 [<ffffffff815c1810>] driver_register+0x60/0xe0 [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70 [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915] [<ffffffff8100042d>] do_one_initcall+0x3d/0x150 [<ffffffff811a935b>] do_init_module+0x5f/0x1d9 [<ffffffff81124416>] load_module+0x20e6/0x27e0 [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0 [<ffffffff81124dae>] SyS_finit_module+0xe/0x10 [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac -> #0 (&dev->mode_config.mutex){+.+.+.}: [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); *** DEADLOCK *** 6 locks held by kworker/u8:0/6: #0: ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #1: ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #2: (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330 #3: (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40 #5: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G O 4.7.0-rc5+ #524 Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016 Workqueue: events_unbound async_run_entry_fn 0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900 ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880 ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0 Call Trace: [<ffffffff814507a5>] dump_stack+0x67/0x92 [<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200 [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90 [<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0 [<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a38c9>] ? process_one_work+0x169/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810a3eb0>] ? process_one_work+0x750/0x750 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 [<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0 v2: Rebase onto the right branch (hand-editing patches ftw) and add more reporters. Reported-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Jiri Kosina <jikos@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 August 2016, 06:08:25 UTC
29986cc Laurent Pinchart 03 August 2016, 20:31:36 UTC drm: rcar-du: Link HDMI encoder with bridge The conversion of the rcar-du driver from the I2C slave encoder to the DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing the bridge from being handled automatically by the DRM core. Fix it. Fixes: 1d926114d8f4 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 August 2016, 05:27:11 UTC
29b4817 Linus Torvalds 08 August 2016, 01:18:00 UTC Linux 4.8-rc1 08 August 2016, 01:18:00 UTC
857953d Linus Torvalds 07 August 2016, 23:38:45 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write 07 August 2016, 23:38:45 UTC
635a4ba Linus Torvalds 07 August 2016, 23:35:08 UTC Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property 07 August 2016, 23:35:08 UTC
1eff9d3 Jens Axboe 05 August 2016, 21:35:16 UTC block: rename bio bi_rw to bi_opf Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com> 07 August 2016, 20:41:02 UTC
31c64f7 Jens Axboe 01 August 2016, 15:39:23 UTC target: iblock_execute_sync_cache() should use bio_set_op_attrs() The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32fcb4 ("target: use bio op accessors") Signed-off-by: Jens Axboe <axboe@fb.com> 07 August 2016, 20:41:02 UTC
ba13e83 Jens Axboe 01 August 2016, 15:38:44 UTC mm: make __swap_writepage() use bio_set_op_attrs() Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: Jens Axboe <axboe@fb.com> 07 August 2016, 20:41:02 UTC
c11f0c0 Jens Axboe 05 August 2016, 14:11:04 UTC block/mm: make bdev_ops->rw_page() take a bool for read/write Commit abf545484d31 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> 07 August 2016, 20:41:02 UTC
52ddb7e Linus Torvalds 07 August 2016, 14:23:17 UTC Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help' 07 August 2016, 14:23:17 UTC
e9d488c Linus Torvalds 07 August 2016, 14:13:14 UTC Merge tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API 07 August 2016, 14:13:14 UTC
337684a Eryu Guan 02 August 2016, 11:58:28 UTC fs: return EPERM on immutable inode In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 August 2016, 14:03:31 UTC
fe64f32 Linus Torvalds 07 August 2016, 14:01:14 UTC Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller 07 August 2016, 14:01:14 UTC
0cbbc42 Linus Torvalds 06 August 2016, 13:50:36 UTC Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull more xfs updates from Dave Chinner: "This is the second part of the XFS updates for this merge cycle, and contains the new reverse block mapping feature for XFS. Reverse mapping allows us to track the owner of a specific block on disk precisely. It is implemented as a set of btrees (one per allocation group) that track the owners of allocated extents. Effectively it is a "used space tree" that is updated when we allocate or free extents. i.e. it is coherent with the free space btrees we already maintain and never overlaps with them. This reverse mapping infrastructure is the building block of several upcoming features - reflink, copy-on-write data, dedupe, online metadata and data scrubbing, highly accurate bad sector/data loss reporting to users, and significantly improved reconstruction of damaged and corrupted filesystems. There's a lot of new stuff coming along in the next couple of cycles,a nd it all builds in the rmap infrastructure. As such, it's a huge chunk of new code with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time kernel with this code in it is released. The new rmap enabled code regresses 3 xfstests - all are ENOSPC related corner cases, one of which Darrick posted a fix for a few hours ago. The other two are fixed by infrastructure that is part of the upcoming reflink patchset. This new ENOSPC infrastructure requires a on-disk format tweak required to keep mount times in check - we need to keep an on-disk count of allocated rmapbt blocks so we don't have to scan the entire btrees at mount time to count them. This is currently being tested and will be part of the fixes sent in the next week or two so users will not be exposed to this change" * tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits) xfs: move (and rename) the deferred bmap-free tracepoints xfs: collapse single use static functions xfs: remove unnecessary parentheses from log redo item recovery functions xfs: remove the extents array from the rmap update done log item xfs: in btree_lshift, only allocate temporary cursor when needed xfs: remove unnecesary lshift/rshift key initialization xfs: remove the get*keys and update_keys btree ops pointers xfs: enable the rmap btree functionality xfs: don't update rmapbt when fixing agfl xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled xfs: add rmap btree block detection to log recovery xfs: add rmap btree geometry feature flag xfs: propagate bmap updates to rmapbt xfs: enable the xfs_defer mechanism to process rmaps to update xfs: log rmap intent items xfs: create rmap update intent log items xfs: add rmap btree insert and delete helpers xfs: convert unwritten status of reverse mappings xfs: remove an extent from the rmap btree xfs: add an extent to the rmap btree ... 06 August 2016, 13:50:36 UTC
835c92d Linus Torvalds 06 August 2016, 13:49:02 UTC Merge branch 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security 06 August 2016, 13:49:02 UTC
ce804bf Linus Torvalds 06 August 2016, 13:44:14 UTC Merge tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull mailcap fixlets from Mauro Carvalho Chehab: "A small fixup for my and Shuah's entries in .mailcap. Basically, those entries were with a syntax that makes get_maintainer.pl to do the wrong thing" * tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan 06 August 2016, 13:44:14 UTC
0803e04 Linus Torvalds 06 August 2016, 13:20:13 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing 06 August 2016, 13:20:13 UTC
80fac0f Linus Torvalds 06 August 2016, 13:18:21 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry 06 August 2016, 13:18:21 UTC
4305f42 Linus Torvalds 06 August 2016, 13:13:11 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ... 06 August 2016, 13:13:11 UTC
db82627 Linus Torvalds 06 August 2016, 13:10:36 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Mostly tooling fixes and some late tooling updates, plus two perf related printk message fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests bpf: Use SyS_epoll_wait alias perf tests: objdump output can contain multi byte chunks perf record: Add --sample-cpu option perf hists: Introduce output_resort_cb method perf tools: Move config/Makefile into Makefile.config perf tests: Add test for bitmap_scnprintf function tools lib: Add bitmap_and function tools lib: Add bitmap_scnprintf function tools lib: Add bitmap_alloc function tools lib traceevent: Ignore generated library files perf tools: Fix build failure on perl script context perf/core: Change log level for duration warning to KERN_INFO perf annotate: Plug filename string leak perf annotate: Introduce strerror for handling symbol__disassemble() errors perf annotate: Rename symbol__annotate() to symbol__disassemble() perf/x86: Modify error message in virtualized environment perf target: str_error_r() always returns the buffer it receives perf annotate: Use pipe + fork instead of popen perf evsel: Introduce constructor for cycles event 06 August 2016, 13:10:36 UTC
c98f582 Linus Torvalds 06 August 2016, 13:04:35 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes and a cleanup-fix, to the syscall entry code and to ptrace" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace x86/ptrace: Stop setting TS_COMPAT in ptrace code x86/vdso: Error out if the vDSO isn't a valid DSO 06 August 2016, 13:04:35 UTC
1630e84 Linus Torvalds 06 August 2016, 13:00:05 UTC Merge tag 'sh-for-4.8' of git://git.libc.org/linux-sh Pull arch/sh updates from Rich Felker: "These changes improve device tree support (including builtin DTB), add support for the J-Core J2 processor, an open source synthesizable reimplementation of the SH-2 ISA, resolve a longstanding sigcontext ABI mismatch issue, and fix various bugs including nommu-specific issues and minor regressions introduced in 4.6. The J-Core arch support is included here but to be usable it needs drivers that are waiting on approval/inclusion from their subsystem maintainers" * tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits) sh: add device tree source for J2 FPGA on Mimas v2 board sh: add defconfig for J-Core J2 sh: use common clock framework with device tree boards sh: system call wire up sh: Delete unnecessary checks before the function call "mempool_destroy" sh: do not perform IPI-based cache flush except on boards that need it sh: add SMP support for J2 sh: SMP support for SH2 entry.S sh: add working futex atomic ops on userspace addresses for smp sh: add J2 atomics using the cas.l instruction sh: add AT_HWCAP flag for J-Core cas.l instruction sh: add support for J-Core J2 processor sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE sh: allow clocksource drivers to register sched_clock backends sh: make heartbeat driver explicitly non-modular sh: make board-secureedge5410 explicitly non-modular sh: make mm/asids-debugfs explicitly non-modular sh: make time.c explicitly non-modular sh: fix futex/robust_list on nommu models sh: disable aliased page logic on NOMMU models ... 06 August 2016, 13:00:05 UTC
194d6ad Linus Torvalds 06 August 2016, 12:58:59 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - fix HugeTLB leak due to CoW and PTE_RDONLY mismatch - avoid accessing unmapped FDT fields when checking validity - correctly account for vDSO AUX entry in ARCH_DLINFO - fix kallsyms with absolute expressions in linker script - kill unnecessary symbol-based relocs in vmlinux * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix copy-on-write referencing in HugeTLB arm64: mm: avoid fdt_check_header() before the FDT is fully mapped arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE 06 August 2016, 12:58:59 UTC
a157b3a Linus Torvalds 06 August 2016, 04:01:33 UTC Merge tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ... 06 August 2016, 04:01:33 UTC
32199ec Linus Torvalds 06 August 2016, 03:56:11 UTC Merge tag 'ntb-4.8' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the ntb_perf and ntb_pingpong for increased debugability. Also, modification to the ntb_transport layer to increase/decrease the number of transport entries depending on the ring size" * tag 'ntb-4.8' of git://github.com/jonmason/ntb: NTB: ntb_hw_intel: use local variable pdev NTB: ntb_hw_intel: show BAR size in debugfs info ntb_test: Add a selftest script for the NTB subsystem ntb_perf: clear link_is_up flag when the link goes down. ntb_pingpong: Add a debugfs file to get the ping count ntb_tool: Add link status and files to debugfs ntb_tool: Postpone memory window initialization for the user ntb_perf: Wait for link before running test ntb_perf: Return results by reading the run file ntb_perf: Improve thread handling to increase robustness ntb_perf: Schedule based on time not on performance ntb_transport: Check the number of spads the hardware supports ntb_tool: Add memory window debug support ntb_perf: Allow limiting the size of the memory windows NTB: allocate number transport entries depending on size of ring size ntb_tool: BUG: Ensure the buffer size is large enough to return all spads ntb_tool: Fix infinite loop bug when writing spad/peer_spad file 06 August 2016, 03:56:11 UTC
a02040d Linus Torvalds 06 August 2016, 03:52:52 UTC Merge tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fixes from Kees Cook: "Fixes for pstore ramoops driver to catch bad kfree() and to use better DT bindings" * tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: use persistent_ram_free() instead of kfree() for freeing prz ramoops: use DT reserved-memory bindings 06 August 2016, 03:52:52 UTC
0603006 Linus Torvalds 06 August 2016, 03:47:27 UTC Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is seven basic fixes (plus one MAINTAINER update) which came in close to the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ipr: Fix error return code in ipr_probe_ioa() fcoe: add missing destroy_workqueue() on error in fcoe_init() lpfc: Fix possible NULL pointer dereference fcoe: Use default VLAN for FIP VLAN discovery ipr: Wait to do async scan until scsi host is initialized MAINTAINERS: Update cxlflash maintainers cxlflash: Verify problem state area is mapped before notifying shutdown lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt() 06 August 2016, 03:47:27 UTC
d268675 Linus Torvalds 06 August 2016, 03:41:52 UTC Merge tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable dm-flakey fix to error read IO during the 'down_interval' - a DM core suspend fix to establish the SUSPENDED flag before dropping the SUSPENDING flag - a blk-mq request-based DM (dm-mq) dm_stop_queue() fix to properly stop the blk-mq hw_queues (and cancel pending requeue work); also set/clear QUEUE_FLAG_STOPPED when stopping/starting the dm-mq request_queue. - a DM multipath fix to harden locking of in-core state flags in the face of concurrent access while handling path failures under heavy IO. - a few small DM raid fixes to edge cases caught with further testing. * tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix use of wrong status char during resynchronization dm raid: constructor fails on non-zero incompat_features dm raid: fix processing of max_recovery_rate constructor flag dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING dm rq: fix the starting and stopping of blk-mq queues dm mpath: add locking to multipath_resume and must_push_back dm flakey: error READ bios during the down_interval 06 August 2016, 03:41:52 UTC
fff648d Linus Torvalds 06 August 2016, 03:31:51 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Here's the second round of block updates for this merge window. It's a mix of fixes for changes that went in previously in this round, and fixes in general. This pull request contains: - Fixes for loop from Christoph - A bdi vs gendisk lifetime fix from Dan, worth two cookies. - A blk-mq timeout fix, when on frozen queues. From Gabriel. - Writeback fix from Jan, ensuring that __writeback_single_inode() does the right thing. - Fix for bio->bi_rw usage in f2fs from me. - Error path deadlock fix in blk-mq sysfs registration from me. - Floppy O_ACCMODE fix from Jiri. - Fix to the new bio op methods from Mike. One more followup will be coming here, ensuring that we don't propagate the block types outside of block. That, and a rename of bio->bi_rw is coming right after -rc1 is cut. - Various little fixes" * 'for-linus' of git://git.kernel.dk/linux-block: mm/block: convert rw_page users to bio op use loop: make do_req_filebacked more robust loop: don't try to use AIO for discards blk-mq: fix deadlock in blk_mq_register_disk() error path Include: blkdev: Removed duplicate 'struct request;' declaration. Fixup direct bi_rw modifiers block: fix bdi vs gendisk lifetime mismatch blk-mq: Allow timeouts to run while queue is freezing nbd: fix race in ioctl block: fix use-after-free in seq file f2fs: drop bio->bi_rw manual assignment block: add missing group association in bio-cloning functions blkcg: kill unused field nr_undestroyed_grps writeback: Write dirty times for WB_SYNC_ALL writeback floppy: fix open(O_ACCMODE) for ioctl-only open 06 August 2016, 03:31:51 UTC
62e6e9b Linus Torvalds 06 August 2016, 03:30:52 UTC Merge tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull PNP fix from Rafael Wysocki: "This fixes build errors due to a missing header file inclusion in drivers/pnp/pnpbios/core.c (Randy Dunlap)" * tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNP: pnpbios: add header file to fix build errors 06 August 2016, 03:30:52 UTC
0524b42 Linus Torvalds 06 August 2016, 03:29:05 UTC Merge tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Two more fixes in ACPI drivers, one in the ACPI EC driver (stable-candidate) and one in the ACPI button driver. Specifics: - An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's method reentrancy limit to be exceeded for a _Qxx method due to a large number of concurrent EC operations, so prevent that from happening by moving the EC handling into a separate workqueue with a limit on the number of concurrently executed work items (Lv Zheng) - Fix the cleanup code in the ACPI button driver that forgets to clear two variables on exit which causes an error to occur on the next attmpt to load the driver (Benjamin Tissoires)" * tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx ACPI / button: remove pointer to old lid_sysfs on unbind 06 August 2016, 03:29:05 UTC
11d8ec4 Linus Torvalds 06 August 2016, 03:26:16 UTC Merge tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "A few more fixes and cleanups in the x86-64 low-level hibernation code, PM core, cpufreq (Kconfig and intel_pstate), and the operating points framework. Specifics: - Prevent the low-level assembly hibernate code on x86-64 from referring to __PAGE_OFFSET directly as a symbol which doesn't work when the kernel identity mapping base is randomized, in which case __PAGE_OFFSET is a variable (Rafael Wysocki). - Avoid selecting CPU_FREQ_STAT by default as the statistics are not required for proper cpufreq operation (Borislav Petkov). - Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of processors where out-of-band (OBB) control of P-states is possible and if that is in use, intel_pstate should not attempt to manage P-states (Srinivas Pandruvada). - Drop some unnecessary checks from the wakeup IRQ handling code in the PM core (Markus Elfring). - Reduce the number operating performance point (OPP) lookups in one of the OPP framework's helper functions (Jisheng Zhang)" * tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/power/64: Do not refer to __PAGE_OFFSET from assembly code cpufreq: Do not default-yes CPU_FREQ_STAT cpufreq: intel_pstate: Add more out-of-band IDs PM / OPP: optimize dev_pm_opp_set_rate() performance a bit PM-wakeup: Delete unnecessary checks before three function calls 06 August 2016, 03:26:16 UTC
39fada5 Linus Torvalds 06 August 2016, 03:24:15 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev 06 August 2016, 03:24:15 UTC
f72035f Linus Torvalds 06 August 2016, 03:07:43 UTC Merge tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB updates from Greg KH: "Here are a few more straggler patches for USB for 4.8-rc1. Most of these are for the usb-serial driver tree. All of those have been in linux-next for a long time, but missed my previous pull request to you. The remaining change is to fix up a staging tree build error, due to some USB gadget driver changes that went in. I put it in this tree as it was for a USB driver and people are reporting the build error on your tree. All of these have been in linux-next for this week, and longer for the usb-serial changes" * tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: staging: emxx_udc: allow modular build USB: serial: use variable for status USB: serial: option: add support for Telit LE910 PID 0x1206 USB: serial: cp210x: use kmemdup USB: serial: ti_usb_3410_5052: use functions rather than macros USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h USB: serial: ti_usb_3410_5052: use __packed USB: serial: ti_usb_3410_5052: remove useless comments 06 August 2016, 03:07:43 UTC
e976e56 Hiraku Toyooka 25 July 2016, 03:56:55 UTC ramoops: use persistent_ram_free() instead of kfree() for freeing prz persistent_ram_zone(=prz) structures are allocated by persistent_ram_new(), which includes vmap() or ioremap(). But they are currently freed by kfree(). This uses persistent_ram_free() for correct this asymmetry usage. Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.kw@hitachi.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com> Signed-off-by: Kees Cook <keescook@chromium.org> 05 August 2016, 18:21:46 UTC
529182e Kees Cook 30 July 2016, 01:11:32 UTC ramoops: use DT reserved-memory bindings Instead of a ramoops-specific node, use a child node of /reserved-memory. This requires that of_platform_device_create() be explicitly called for the node, though, since "/reserved-memory" does not have its own "compatible" property. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rob Herring <robh@kernel.org> 05 August 2016, 18:21:36 UTC
34b5835 Michel Dänzer 05 August 2016, 09:36:10 UTC drm/ttm: Wait for a BO to become idle before unbinding it from GTT Fixes hangs under memory pressure, e.g. running the piglit test tex3d-maxsize concurrently with other tests. Fixes: 17d33bc9d6ef ("drm/ttm: drop waiting for idle in ttm_bo_evict.") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 05 August 2016, 17:37:02 UTC
95f1464 Allen Hubbe 22 July 2016, 13:38:23 UTC NTB: ntb_hw_intel: use local variable pdev Clean up duplicated expression by replacing it with the equivalent local variable pdev. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:34:13 UTC
4089527 Allen Hubbe 22 July 2016, 13:38:22 UTC NTB: ntb_hw_intel: show BAR size in debugfs info It will be useful to know the hardware configured BAR size to diagnose issues with NTB memory windows. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:33:47 UTC
a9c59ef Logan Gunthorpe 20 June 2016, 19:15:12 UTC ntb_test: Add a selftest script for the NTB subsystem This script automates testing doorbells, scratchpads and memory windows for an NTB device. It can be run locally, with the NTB looped back to the same host or use SSH to remotely control the second host. In the single host case, the script just needs to be passed two arguments: a PCI ID for each side of the link. In the two host case the -r option must be used to specify the remote hostname (which must be SSH accessible and should probably have ssh-keys exchanged). A sample run looks like this: $ sudo ./ntb_test.sh 0000:03:00.1 0000:83:00.1 -p 29 Starting ntb_tool tests... Running link tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running link tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running db tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running db tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running spad tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running spad tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw0 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw0 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw1 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw1 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Starting ntb_pingpong tests... Running ping pong tests on: 0000:03:00.1 / 0000:83:00.1 Passed Starting ntb_perf tests... Running local perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Running remote perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:08 UTC
35539b5 Logan Gunthorpe 20 June 2016, 19:15:13 UTC ntb_perf: clear link_is_up flag when the link goes down. When the link goes down, the link_is_up flag did not return to false. This could have caused some subtle corner case bugs when the link goes up and down quickly. Once that was fixed, there was found to be a race if the link was brought down then immediately up. The link_cleanup work would occasionally be scheduled after the next link up event. This would cancel the link_work that was supposed to occur and leave ntb_perf in an unusable state. To fix this we get rid of the link_cleanup work and put the actions directly in the link_down event. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:08 UTC
20572ee Logan Gunthorpe 20 June 2016, 19:15:11 UTC ntb_pingpong: Add a debugfs file to get the ping count This commit adds a debugfs 'count' file to ntb_pingpong. This is so testing with ntb_pingpong can be automated beyond just checking the logs for pong messages. The count file returns a number which increments every pong. The counter can be cleared by writing a zero. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:07 UTC
bfcaa39 Logan Gunthorpe 20 June 2016, 19:15:10 UTC ntb_tool: Add link status and files to debugfs In order to more successfully script with ntb_tool it's useful to have a link file to check the link status so that the script doesn't use the other files until the link is up. This commit adds a 'link' file to the debugfs directory which reads boolean (Y or N) depending on the link status. Writing to the file change the link state using ntb_link_enable or ntb_link_disable. A 'link_event' file is also provided so an application can block until the link changes to the desired state. If the user writes a 1, it will block until the link is up. If the user writes a 0, it will block until the link is down. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:07 UTC
717146a Logan Gunthorpe 20 June 2016, 19:15:09 UTC ntb_tool: Postpone memory window initialization for the user In order to make the interface closer to the raw NTB API, this commit changes memory windows so they are not initialized on link up. Instead, the 'peer_trans*' debugfs files are introduced. When read, they return information provided by ntb_mw_get_range. When written, they create a buffer and initialize the memory window. The value written is taken as the requested size of the buffer (which is then rounded for alignment). Writing a value of zero frees the buffer and tears down the memory window translation. The 'peer_mw*' file is only created once the memory window translation is setup by the user. Additionally, it was noticed that the read and write functions for the 'peer_mw*' files should have checked for a NULL pointer. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:07 UTC
26dc638 Logan Gunthorpe 20 June 2016, 19:15:07 UTC ntb_perf: Wait for link before running test Instead of returning immediately with an error when the link is down, wait for the link to come up (or the user sends a SIGINT). This is to make scripting ntb_perf easier. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:07 UTC
58fd0f3 Logan Gunthorpe 20 June 2016, 19:15:06 UTC ntb_perf: Return results by reading the run file Instead of having to watch logs, allow the results to be retrieved by reading back the run file. This file will return "running" when the test is running and nothing if no tests have been run yet. It returns 1 line per thread, and will display an error message if the corresponding thread returns an error. With the above change, the pr_info calls that returned the results are then changed to pr_debug calls. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:07 UTC
da573ea Logan Gunthorpe 20 June 2016, 19:15:05 UTC ntb_perf: Improve thread handling to increase robustness This commit accomplishes a few things: 1) Properly prevent multiple sets of threads from running at once using a mutex. Lots of race issues existed with the thread_cleanup. 2) The mutex allows us to ensure that threads are finished before tearing down the device or module. 3) Don't use kthread_stop when the threads can exit by themselves, as this is counter-indicated by the kthread_create documentation. Threads now wait for kthread_stop to occur. 4) Writing to the run file now blocks until the threads are complete. The test can then be safely interrupted by a SIGINT. Also, while I was at it: 5) debugfs_run_write shouldn't return 0 in the early check cases as this could cause debugfs_run_write to loop undesirably. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:06 UTC
fd2ecd8 Logan Gunthorpe 20 June 2016, 19:15:04 UTC ntb_perf: Schedule based on time not on performance When debugging performance problems, if some issue causes the ntb hardware to be significantly slower than expected, ntb_perf will hang requiring a reboot because it only schedules once every 4GB. Instead, schedule based on jiffies so it will not hang the CPU if the transfer is slow. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:06 UTC
19645a0 Logan Gunthorpe 07 June 2016, 17:20:22 UTC ntb_transport: Check the number of spads the hardware supports I'm working on hardware that currently has a limited number of scratchpad registers and ntb_ndev fails with no clue as to why. I feel it is better to fail early and provide a reasonable error message then to fail later on. The same is done to ntb_perf, but it doesn't currently require enough spads to actually fail. I've also removed the unused SPAD_MSG and SPAD_ACK enums so that MAX_SPAD accurately reflects the number of spads used. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:06 UTC
8b71d28 Logan Gunthorpe 03 June 2016, 20:50:33 UTC ntb_tool: Add memory window debug support We allocate some memory window buffers when the link comes up, then we provide debugfs files to read/write each side of the link. This is useful for debugging the mapping when writing new drivers. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:06 UTC
4aae977 Logan Gunthorpe 03 June 2016, 20:50:31 UTC ntb_perf: Allow limiting the size of the memory windows On my system, dma_alloc_coherent won't produce memory anywhere near the size of the BAR. So I needed a way to limit this. It's pretty much copied straight from ntb_transport. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:06 UTC
a754a8f Dave Jiang 08 April 2016, 17:49:06 UTC NTB: allocate number transport entries depending on size of ring size Currently we only allocate a fixed default number of descriptors for the tx and rx side. We should dynamically resize it to the number of descriptors resides in the transport rings. We should know the number of transmit descriptors at initializaiton. We will allocate the default number of descriptors for receive side and allocate additional ones when we know the actual max entries for receive. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <allen.hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:21:05 UTC
625f080 Logan Gunthorpe 20 June 2016, 19:15:08 UTC ntb_tool: BUG: Ensure the buffer size is large enough to return all spads On hardware with 32 scratchpad registers the spad field in ntb tool could chop off the end. The maximum buffer size is increased from 256 to 15 times the number or scratchpads. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:05:31 UTC
c792eba Logan Gunthorpe 27 May 2016, 20:38:31 UTC ntb_tool: Fix infinite loop bug when writing spad/peer_spad file If you tried to write two spads in one line, as per the example: root@peer# echo '0 0x01010101 1 0x7f7f7f7f' > $DBG_DIR/peer_spad then the CPU would freeze in an infinite loop. This wasn't immediately obvious but 'pos' was not incrementing the buffer, so after reading the second pair of values, 'pos' would once again be 3 and it would re-read the second pair of values ad infinitum. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 05 August 2016, 14:05:31 UTC
4dc14b3 Rafael J. Wysocki 05 August 2016, 14:04:49 UTC Merge branches 'acpi-ec' and 'acpi-button' * acpi-ec: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx * acpi-button: ACPI / button: remove pointer to old lid_sysfs on unbind 05 August 2016, 14:04:49 UTC
6c84239 Linus Torvalds 05 August 2016, 13:48:22 UTC Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ... 05 August 2016, 13:48:22 UTC
e2b3b80 Rafael J. Wysocki 05 August 2016, 13:46:55 UTC Merge branches 'pm-sleep', 'pm-cpufreq', 'pm-core' and 'pm-opp' * pm-sleep: x86/power/64: Do not refer to __PAGE_OFFSET from assembly code * pm-cpufreq: cpufreq: Do not default-yes CPU_FREQ_STAT cpufreq: intel_pstate: Add more out-of-band IDs * pm-core: PM-wakeup: Delete unnecessary checks before three function calls * pm-opp: PM / OPP: optimize dev_pm_opp_set_rate() performance a bit 05 August 2016, 13:46:55 UTC
d4c06c7 Linus Torvalds 05 August 2016, 13:45:14 UTC Merge tag 'sound-fix-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing existing here: as usual a few HD-audio fixes (device fixups, a new AMD PCI ID, and a fix for krealloc() usage), in addition to a fix in Kconfig for legacy arm drivers" * tag 'sound-fix-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix headset mic detection problem for two dell machines ALSA: hda: Fix krealloc() with __GFP_ZERO usage ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps ALSA: arm: Fix empty menuconfig SND_ARM ALSA: hda - On-board speaker fixup on ACER Veriton ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO 05 August 2016, 13:45:14 UTC
2cfd716 Linus Torvalds 05 August 2016, 13:00:54 UTC Merge tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "These were delayed for various reasons, so I let them sit in next a bit longer, rather than including them in my first pull request. Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label use for [cpu|mmu]_has_feature(): - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers" * tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc/mm: Move register_process_table() out of ppc_md powerpc/perf: Fix incorrect event codes in power9-event-list powerpc/32: Fix early access to cpu_spec relocation powerpc/ptrace: Enable support for Performance Monitor registers powerpc/ptrace: Enable support for EBB registers powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR powerpc/ptrace: Enable support for TM SPR state powerpc/ptrace: Enable support for NT_PPC_CVSX powerpc/ptrace: Enable support for NT_PPC_CVMX powerpc/ptrace: Enable support for NT_PPC_CFPR powerpc/ptrace: Enable support for NT_PPC_CGPR powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests powerpc/process: Add the function flush_tmregs_to_thread elf: Add powerpc specific core note sections powerpc/mm: remove flush_tlb_page_nohash powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range ... 05 August 2016, 13:00:54 UTC
back to top